Answer:
[tex]t_2=10[/tex]
Explanation:
From the question we are told that:
Velocity of both spaceships [tex]V=0.8c[/tex]
Time [tex]t_1=6[/tex]
Generally the equation for time of spaceship 2 through earth is mathematically given by
[tex]t_2=\frac{t_1}{\sqrt{1-v^2}}[/tex]
[tex]t_2=\frac{6}{\sqrt{1-0.8^2}}[/tex]
[tex]t_2=10[/tex]
A bicycle wheel has a diameter of 63.4 cm and a mass of 1.86 kg. Assume that the wheel is a hoop with all of the mass concentrated on the outside radius. The bicycle is placed on a stationary stand and a resistive force of 123 N is applied tangent to the rim of the tire. What force is required if you shift to a 5.60-cm-diameter sprocket?
Answer:
Njfjrhrjrkrirkehrbrhrrhrhehrhrhejejebrbrhrbrbbbrhje
dujevduxjehhsusheheh
m=100g
F-?
Answer:
Force = mass × acceleration
[tex]F =(100 \times 1000) \times 10 \\ = 1 \times {10}^{6} \: newtons[/tex]
A ten loop coil of area 0.23 m2 is in a 0.047 T uniform magnetic field oriented so that the maximum flux goes through the coil. The average emf induced in the coil is
Answer:
Explanation:
From the question we are told that:
Number of turns [tex]N=10[/tex]
Area [tex]a=0.23m^2[/tex]
Magnetic field [tex]B=0.947T[/tex]
Generally the equation for maximum flux is mathematically given by
[tex]\phi=NBa[/tex]
[tex]\phi=10*0.047*0.23[/tex]
[tex]\phi=0.1081wbi[/tex]
Therefore induced emf
[tex]e= \frac{d\phi}{dt}[/tex]
Since
[tex]t=0[/tex]
Therefore
[tex]e=0[/tex]
monochromatic light of wavelength 500 nm is incident normally on a diffraction grating. if the third order maximum is 32. how many total number of maximuima can be seen
Answer:
The total number of maxima that can be seen is 11
Explanation:
Given the data in the question
wavelength λ = 500 nm = 5 × 10⁻⁷ m
if the third order maximum is 32
i.e m = 3 and θ = 32°
Now, we know that condition for diffraction maximum is as follows;
d × sinθ = m × λ
so we substitute in our given values
d × sin( 32° ) = 3 × 5 × 10⁻⁷ m
d × sin( 32° ) = 1.5 × 10⁻⁶ m
d = [ 1.5 × 10⁻⁶ m ] / sin( 32° )
d = 2.83 × 10⁻⁶ m
Now, maxima n when θ = 90° will be;
sin( 90° ) = nλ / d
1 = nλ / d
d = nλ
n = d / λ
we substitute
n = [ 2.83 × 10⁻⁶ m ] / [ 5 × 10⁻⁷ m ]
n = 5.66
so 5 is the max value
hence, total maxima value is;
⇒ 2n + 1 = 2( 5 ) + 1 = 10 + 1 = 11
Therefore, total number of maxima that can be seen is 11
80 grams of iron at 100°C is dropped into 200 of water at 20°C contained in an iron vessel of mass 50 gram find the resulting temperature.
Answer:
the resulting temperature is 23.37 ⁰C
Explanation:
Given;
mass of the iron, m₁ = 80 g = 0.08 kg
mass of the water, m₂ = 200 g = 0.2 kg
mass of the iron vessel, m₃ = 50 g = 0.05 kg
initial temperature of the iron, t₁ = 100 ⁰C
initial temperature of the water, t₂ = 20 ⁰C
specific heat capacity of iron, c₁ = 462 J/kg⁰C
specific heat capacity of water, c₂ = 4,200 J/kg⁰C
let the temperature of the resulting mixture = T
Apply the principle of conservation of energy;
heat lost by the hot iron = heat gained by the water
[tex]m_1c_1 \Delta t_1 = m_2c_2\Delta t_2\\\\m_1c_1 (100 - T) = m_2c_2 (T- 20)\\\\0.08 \times 462 (100-T) = 0.2 \times 4,200 (T-20)\\\\36.96 (100-T) = 840 (T-20) \\\\100 - T = 22.72 (T-20)\\\\100-T = 22.72 T - 454.4 \\\\554.4 = 23.72T\\\\T = \frac{554.4}{23.72} \\\\T = 23.37 \ ^0C[/tex]
Therefore, the resulting temperature is 23.37 ⁰C
A negative slope on the velocity vs. time graph indicates a negative
acceleration.
A True
B. False
A. true
means decelerating
found in brainly itself
shirleywashington
Ambitious
2.3K answers
14M people helped
Explanation :
We know that the slope of velocity -time graph gives the acceleration. Acceleration of an object is defined as the rate of change of velocity i.e.

Suppose a driver suddenly applies brakes. In this case the initial velocity of his or her vehicle is more and the final velocity is less.
So, the acceleration is negative in this case i.e. the object is decelerating.
A negative slope on the velocity versus time graph indicates that an object is not accelerating. This statement is false as the object is decelerating.
what is the prefix notation of 0.0000738?
Answer:
7.38 × 10-5
Explanation:
All numbers in scientific notation or standard form are written in the form m × 10n, where m is a number between 1 and 10 ( 1 ≤ |m| < 10 ) and the exponent n is a positive or negative integer.
To convert 0.0000738 into scientific notation, follow these steps:
Move the decimal 5 times to the right in the number so that the resulting number, m = 7.38, is greater than or equal to 1 but less than 10
Since we moved the decimal to the right the exponent n is negative
n = -5
Write in the scientific notation form, m × 10n
= 7.38 × 10-5
Therefore, the decimal number 0.0000738 written in scientific notation is 7.38 × 10-5 and it has 3 significant figures.
Answer = 7.38 × 10-5
At a distance of 14,000 km from the center of Planet Z-99, the acceleration due to gravity is 32 m/s2. What is the acceleration due to gravity at a point 28,000 km from the center of this planet
A body of mass m feels a gravitational force due to the planet of
F = GmM/R ² = ma
where
• G = 6.67 × 10⁻¹¹ N•m²/kg² is the universal gravitational constant
• M is the mass of the planet
• R is the distance between the body and the planet's center
• a is the acceleration due to gravity
Solving for a gives
a = GM/R ²
Notice that 28,000 km is twice 14,000 km. The equation says that the acceleration varies inversely with the square of the distance. So if R is changed to 2R, we have a new acceleration of
GM/(2R)² = 1/4 × GM/R ² = a/4
so the acceleration of the body at 28,000 km from the planet's center would be (32 m/s²)/4 = 8 m/s².
What is the result of (305.120 + 267.443) x 0.50? How many answers can be written based on the principle of significant digits?
Answer:
The answer is 286.2815.
On the sonometer shown below, a horizontal cord of length 5 m has a mass of 1.45 g. When the cord was plucked the wave produced had a frequency of 120 Hz and wavelength of 6 cm. (a) What was the tension in the cord? (b) How large a mass M must be hung from its end to give it this tension?
Answer:
(a) T = 0.015 N
(b) M = 1.53 x 10⁻³ kg = 1.53 g
Explanation:
(a) T = 0.015 N
First, we will find the speed of waves:
[tex]v =f\lambda[/tex]
where,
v = speed of wave = ?
f = frequency = 120 Hz
λ = wavelength = 6 cm = 0.06 m
Therefore,
v = (120 Hz)(0.06 m)
v = 7.2 m/s
Now, we will find the linear mass density of the coil:
[tex]\mu = \frac{m}{l}[/tex]
where,
μ = linear mass density = ?
m = mass = 1.45 g = 1.45 x 10⁻³ kg
l = length = 5 m
Thereforre,
[tex]\mu = \frac{1.45\ x\ 10^{-3}\ kg}{5\ m}\\\\\mu = 2.9\ x\ 10^{-4}\ kg/m[/tex]
Now, for the tension we use the formula:
[tex]v = \sqrt{\frac{T}{\mu}}\\\\7.2\ m/s = \sqrt{\frac{T}{2.9\ x\ 10^{-4}\ kg/m}}\\\\(51.84\ m^2/s^2)(2.9\ x\ 10^{-4}\ kg/m) = T[/tex]
T = 0.015 N
(b)
The mass to be hung is:
[tex]T = Mg\\\\M = \frac{T}{g}\\\\M = \frac{0.015\ N}{9.8\ m/s^2}\\\\[/tex]
M = 1.53 x 10⁻³ kg = 1.53 g
A solid object is made of two materials, one material having density of 2 000 kg/m3 and the other having density of 6 000 kg/m3. If the object contains equal masses of the materials, what is its average density
Answer:
[tex]\rho_{avg}=4000kg/m^3[/tex]
Explanation:
From the question we are told that:
Density of Material 1 [tex]\rho_1=2000kg/m^3[/tex]
Density of Material 2 [tex]\rho_2=6000kg/m^3[/tex]
Generally the equation for Average density is mathematically given by
[tex]\rho_{avg}=frac{\rho _1+rho _2}{2}[/tex]
[tex]\rho_{avg}=\frac{2000+6000}{2}[/tex]
[tex]\rho_{avg}=4000kg/m^3[/tex]
A positive statement is:________. a. reflects oneâs opinions. b. can be shown to be correct or incorrect. c. a value judgment. d. based upon an optimistic judgment.
Answer:
b
Explanation:
A technician builds an RLC series circuit which includes an AC source that operates at a fixed frequency and voltage. At the operating frequency, the resistance R is equal to the inductive reactance XL. The technician notices that when the plate separation of the parallel-plate capacitor is reduced to one-half its original value, the current in the circuit doubles. Determine the initial capacitive reactance in terms of the resistance R.
Answer:
Xc = (0.467 - 0.427j)R
Explanation:
Since the resistance in the circuit is R, the reactance of the inductor is XL and the reactance of the capacitor is XC, then the impedance of the circuit is
Z = √[R² + (XL - XC)²]
Since the inductive reactance XL equals the resistance R, we have that
Z = √[R² + (XL - XC)²]
Z = √[R² + (R - XC)²]
Thus, the current in the circuit is thus I = V/Z = V/√[R² + (R - XC)²]
Now, when the plate separation of the parallel plate capacitor is reduced to one-half its original value, the current doubles. Also, when the plate separation is reduced to half, the capacitance doubles since C ∝ 1/d where C is capacitance and d separation between the plates. Since the capacitance doubles, the new reactance XC' is twice the initial reactance XC. So, XC' = 2XC. Thus the new impedance is thus
Z' = √[R² + (R - XC')²]
Z' = √[R² + (R - 2XC)²]
The new current is I' = V/Z' = V/√[R² + (R - 2XC)²]
Since the current doubles, I' = 2I.
V/√[R² + (R - 2XC)²] = 2V/√[R² + (R - XC)²]
1/√[R² + (R - 2XC)²] = 2/√[R² + (R - XC)²]
√[R² + (R - XC)²] = 2√[R² + (R - 2XC)²]
squaring both sides, we have
[R² + (R - XC)²] = 4[R² + (R - 2XC)²]
expanding the brackets, we have
[R² + R² - 2RXC + XC²] = 4[R² + R² - 4RXC + 4XC²]
[2R² - 2RXC + XC²] = 4[2R² - 4RXC + 4XC²]
2R² - 2RXC + XC² = 8R² - 16RXC + 16XC²
collecting like terms, we have
16RXC - 2RXC + XC² - 16XC² = 8R² - 2R²
14RXC - 15XC² = 6R²
15XC² - 14RXC + 6R² = 0
Using the quadratic formula to find XC, we have
[tex]XC = \frac{-(-14R) +/- \sqrt{(-14R)^{2} - 4 X 15 X 6R^{2} } }{2 X 15}\\= \frac{-(-14R) +/- \sqrt{196R^{2} - 360R^{2} } }{30}\\ \\= \frac{14R +/- \sqrt{- 164R^{2} } }{30}\\ \\= \frac{14R +/- 12.81Ri }{30}\\\\= 0.467R +/- 0.427Ri[/tex]
Since it is capacitive, we take the negative part.
So, Xc = (0.467 - 0.427j)R
An electric field E⃗ =5.00×105ı^N/C causes the point charge in the figure to hang at an angle. What is θ?
We have that the angle is
[tex]\theta=32.53[/tex]
From the Question we are told that
E⃗ =5.00×105ı^N/C
Generally the equation for Tension is mathematically given
[tex]W=Tcos\theta[/tex]
Where
[tex]tan\theta=\frac{2.5*10^{-9}(5*10{5})}{2*10^{-3}(9.8)}[/tex]
[tex]\theta=32.53[/tex]
For more information on this visit
https://brainly.com/question/20746649?referrer=searchResults
Suppose 2.10 C of positive charge is distributed evenly throughout a sphere of 1.30-cm radius. 1) What is the charge per unit volume for this situation
Answer:
[tex]\rho=2.28\times 10^5\ C/m^3[/tex]
Explanation:
Given that,
Charge, Q = 2.1 C
The radius of sphere, r = 1.3 cm = 0.013 m
We need to find the charge per unit volume for this situation. It can be calculated a follows:
[tex]\rho=\dfrac{Q}{\dfrac{4}{3}\pi r^3}\\\\\rho=\dfrac{2.1}{\dfrac{4}{3}\pi \times (0.013)^3}\\\\\rho=2.28\times 10^5\ C/m^3[/tex]
So, the charge per unit volume is [tex]2.28\times 10^5\ C/m^3[/tex].
A T-shirt cannon launches a shirt at 5.30 m/s from a platform height of 4.00 m from ground level. How fast (in m/s) will the shirt be traveling if it is caught by someone whose hands are at 5.20 m from ground level (b) 4.00 m from ground level?
Answer:
(a) the velocity of the shirt is 2.14 m/s
(b) the velocity of the shirt is 5.3 m/s
Explanation:
Given;
initial velocity of the shirt, u = 5.3 m/s
height of the platform above the ground, h = 4.00 m
(a) When the shirt is caught by someone whose hand is 5.20 m from the ground level, the height traveled by the shirt = 5.2 m - 4.0 m = 1.2 m
The velocity at this position is calculated as;
[tex]v^2 = u^2 + 2(-g)h\\\\v^2 = u^2 - 2gh\\\\v^2 = 5.3^2 - (2\times 9.8 \times 1.2)\\\\v^2 = 4.57\\\\v= \sqrt{4.57} \\\\v = 2.14 \ m/s[/tex]
(b) When the shirt is caught by someone whose hand is 4.00 m from the ground level, the height traveled by the shirt = 4.00 m - 4.00 m = 0 m
The velocity at this position is calculated as;
[tex]v^2 = u^2 + 2(-g)h\\\\v^2 = u^2 - 2gh\\\\v^2 = 5.3^2 - (2\times 9.8 \times 0)\\\\v^2 = 28.09\\\\v= \sqrt{28.09} \\\\v = 5.3 \ m/s[/tex]
The top of a swimming pool is at ground level. If the pool is 2.60 m deep, how far below ground level does the bottom of the pool appear to be located for the following conditions?
a. The pool is completely filled with water.
______m below ground level
b. The pool is filled halfway with water.
______m below ground level
Answer:
a) [tex]d_g=1.95m[/tex]
b) [tex]d_g'=2.3m[/tex]
Explanation:
From the question we are told that:
Depth [tex]d=2.60[/tex]
a)
Generally the equation for distance to ground is mathematically given by
[tex]\frac{d_g}{d}=\frac{1}{n}[/tex]
Where
[tex]n=\frac{4}{3}[/tex]
Therefore
[tex]d_g=\frac{d}{n}[/tex]
[tex]d_g=\frac{2.6}{4/3}[/tex]
[tex]d_g=1.95m[/tex]
b)
For when The pool is filled halfway with water
[tex]\frac{d_g}{d}=\frac{1}{n}[/tex]
[tex]d_g'=\frac{1.3}{4/3}[/tex]
[tex]d_g'=0.98m[/tex]
Therefore
[tex]d_g'=(1.3+0.98)[/tex]
[tex]d_g'=2.3m[/tex]
Consider a wave along the length of a stretched slinky toy, where the distance between coils increases and decreases. What type of wave is this
"Longitudinal wave" is the wave where the difference between the coils increases as well as decreases.
Generating waves whenever the form of communication being displaced in a similar direction as well as in the reverse way of the wave's designated points, could be determined as Longitudinal waves.A wave running the length of something like a Slinky stuffed animal, which expands as well as reduces the spacing across spindles, produces a fine image or graphic.
Thus the above answer is correct.
Learn more about waves here:
https://brainly.com/question/17700099
A dog statue is standing in the bed of a pickup truck. The bed is coated with ice, causing the force of friction between the statue and the truck to be zero. The truck is initially at rest, and then accelerates to the right, moving along a flat road. As seen from a stationary observer (watching the truck move to the right), the dog statue Group of answer choices moves to the right, but not as quickly as the truck is moving to the right, causing it to slide towards the back of the truck. does not move left or right, but the back of the truck moves towards the statue. moves to the left, as the truck moves to the right, causing the statue to slide towards the back of the truck. moves to the right at the same rate as the truck, so it doesn't slide.
Answer:
Moves towards left
Explanation:
When the truck is moving towards right then there is pseudo force acting on the fog statue which is acting left wards.
A seen from the stationary observer, the dog statue moves towards left.
During a particular thunderstorm, the electric potential difference between a cloud and the ground is Vcloud - Vground = 4.20 108 V, with the cloud being at the higher potential. What is the change in an electron's electric potential energy when the electron moves from the ground to the cloud?
Answer:
The electric potential energy is 6.72 x 10^-11 J.
Explanation:
Potential difference, V = 4.2 x 10^8 V
charge of electron, q = - 1.6 x 10^-19 C
Let the potential energy is U.
U = q V
U = 1.6 x 10^-19 x 4.2 x 10^8
U = 6.72 x 10^-11 J
When a ray of light passes through a boundary between two transparent media, it changes direction. What is this phenomenon known as?
Choose the best answer from the choices provided.
a. reflection
b. refraction
c. interference
d. diffraction
e. dispersion
Answer:
I think Refraction
Explanation:
I think refraction is light which passes through a boundary between 2 transparent media.
A solid conducting sphere of radius ra is placed concentrically inside a conducting spherical shell of inner radius rb1 and outer radius rb2. The inner sphere carries a charge Q while the outer sphere does not carry any net charge. The potential for rb1 < r < rb2 is:________
Answer:
The right answer is "[tex]\frac{KQ}{r_b_2}[/tex]".
Explanation:
As the outer spherical shell is conducting, so there is no electric field in side from
⇒ [tex]r_b_1 < r < r_b_2[/tex].
So the electric potential at all points inside the conducting shell that from
⇒ [tex]r_b_1<r<r_b_2[/tex]
and will be similar as well as equivalent to the potential on the outer surface of the shell that will be:
⇒ [tex]v=\frac{KQ}{r_b_2}[/tex]
Thus the above is the right solution.
A penny of mass 3.10 g rests on a small 20.0 g block supported by a spinning disk with radius of 12.0 cm. The coefficients of friction between block and disk are 0.850 (static) and 0.575 (kinetic) while those for the penny and block are 0.395 (kinetic) and 0.495 (static). What is the maximum rate of rotation in revolutions per minute that the disk can have, without the block or penny sliding on the disk
Answer:
do this Q yourself because i havent read the chapter
The maximum rate of rotation in revolutions per minute that the disk can have, without the block or penny sliding on the disk is 63 rpm.
How to solveThis is calculated using the coefficient of static friction between the penny and block, which is 0.495.
The maximum angular velocity of the disk is when the force of static friction is just sufficient to prevent the penny from sliding.
This force is equal to the mass of the penny multiplied by the acceleration due to gravity, multiplied by the coefficient of static friction.
The angular velocity of the disk is then calculated from this force and the radius of the disk.
Read more about angular velocity here:
https://brainly.com/question/6860269
#SPJ6
A 12.0 g sample of gas occupies 19.2 L at STP. what is the of moles and molecular weight of this gas?
At STP, 1 mole of an ideal gas occupies a volume of about 22.4 L. So if n is the number of moles of this gas, then
n / (19.2 L) = (1 mole) / (22.4 L) ==> n = (19.2 L•mole) / (22.4 L) ≈ 0.857 mol
If the sample has a mass of 12.0 g, then its molecular weight is
(12.0 g) / n ≈ 14.0 g/mol
What are the major sources of energy utilized during a 100 meter race, a 1000 meter race, and a marathon
Answer:
The energy from food and then from plants and then from sun.
As sun is the ultimate source of energy.
Explanation:
Distance = 100 m, 1000m, marathon
As the distance is covered by the person, so the muscular energy is used and thus the energy comes form out food.
As we know that the energy can neither be created nor be destroyed it can transform from one form to another.
So, the energy form the food which we consume is converted into the kinetic energy as we run.
6. Two astronauts of equal mass step from the top of a rocket on Venus. One slides down a 10- degree ramp while the other slides down a 75-degree ramp. If all friction is ignored, which astronaut reaches the surface of Venus with the lower kinetic energy
Answer:
Final kinetic energies of both astronauts will be the same.
Explanation:
If we ignore all the friction present between the ramp and the person. Then essentially there is no loss of energy in the system. Hence the initial potential energies of the astronauts must be equal to their final kinetic energies.
Now the potential energy depends upon mass, height and acceleration due to gravity. All these parameters for both the astronauts. Therefore,both astronauts have same initial potential energies.
Similarly, the final kinetic energies of astronauts will also be the same.
Consider a neutron star with a mass equal to the sun, a radius of 19 km, and a rotation period of 1.0 s. What is the speed of a point on the equator of the star
Answer:
120 km/s
Explanation:
Given data :
Radius of the star is r = 19 km
Rotational time period of the star is T = 1 s
Therefore, we know that the velocity of the star is given by :
[tex]$V=\frac{2\pi r}{T}$[/tex]
[tex]$V=\frac{2 \times 3.14 \times 19\times 10^3}{1}$[/tex]
V = 119380.52 m/s
Therefore, the velocity of the point on the equator of the star is = 120 km/s
In a large chemical factory, a feed pipe carries a liquid at a speed of 5.5 m/s. A pump pushes the liquid along at a gauge pressure of 140,000 Pa. The liquid travels upward 6.0 m and enters a tank at a gauge pressure of 2,000 Pa. The diameter of the pipe remains constant. At what speed does the liquid enter the tank
Answer:
v₂ = 15.24 m / s
Explanation:
This is an exercise in fluid mechanics
Let's write Bernoulli's equation, where the subscript 1 is for the factory pipe and the subscript 2 is for the tank.
P₁ + ½ ρ v₁² + ρ g y₁ = P₂ + ½ ρ v₂² + ρ g y₂
They indicate the pressure in the factory P₁ = 140000 Pa, the velocity
v₁ = 5.5 m / s and the initial height is zero y₁ = 0
the tank is at a pressure of P2 = 2000 Pa and a height of y₂ = 6.0 m
P₁ -P₂ + ρ g (y₁ -y₂) + ½ ρ v₁² = ½ ρ v₂²
let's calculate
140,000 - 2000 + ρ 9.8 (0- 6) + ½ ρ 5.5² = ½ ρ v₂²
138000 - ρ 58.8 + ρ 15.125 = ½ ρ v2²
v₂² = 2 (138000 /ρ - 58.8 + 15.125)
v₂ = [tex]\sqrt{\frac{276000}{\rho } - 43.675 }[/tex]
In the exercise they do not indicate what type of liquid is being used, suppose it is water with
ρ = 1000 kg / m³
v₂ = [tex]\sqrt{\frac{276000}{1000} - 43.675}[/tex]
v₂ = 15.24 m / s
A rigid, insulated tank whose volume is 10 L is initially evacuated. A pinhole leak develops and air from the surroundings at 1 bar, 25 C enters the tank until the pressure in the tank becomes 1 bar (assume ideal gas model k=1.4 for the air). Find:
A) final temperature in tank.
B) amount of air that leaks into tank in grams.
C) amount of entropy produced in J/K.
Answer:
The answer is "[tex]143.74^{\circ} \ C , 8.36\ g, and \ 2.77\ \frac{K}{J}[/tex]"
Explanation:
For point a:
Energy balance equation:
[tex]\frac{dU}{dt}= Q-Wm_ih_i-m_eh_e\\\\[/tex]
[tex]W=0\\\\Q=0\\\\m_e=0[/tex]
From the above equation:
[tex]\frac{dU}{dt}=0-0+m_ih_i-0\\\\\Delta U=\int^{2}_{1}m_ih_idt\\\\[/tex]
because the rate of air entering the tank that is [tex]h_i[/tex] constant.
[tex]\Delta U = h_i \int^{2}_{1} m_i dt \\\\= h_i(m_2 -m_1)\\\\m_2u_2-m_1u_2=h_i(M_2-m_1)\\\\[/tex]
Since the tank was initially empty and the inlet is constant hence, [tex]m_2u-0=h_1(m_2-0)\\\\m_2u_2=h_1m_2\\\\u_2=h_1\\\\[/tex]
Interpolate the enthalpy between [tex]T = 300 \ K \ and\ T=295\ K[/tex]. The surrounding air
temperature:
[tex]T_1= 25^{\circ}\ C\ (298.15 \ K)\\\\\frac{h_{300 \ K}-h_{295\ K}}{300-295}= \frac{h_{300 \ K}-h_{1}}{300-295.15}[/tex]
Substituting the value from ideal gas:
[tex]\frac{300.19-295.17}{300-295}=\frac{300.19-h_{i}}{300-298.15}\\\\h_i= 298.332 \ \frac{kJ}{kg}\\\\Now,\\\\h_i=u_2\\\\u_2=h_i=298.33\ \frac{kJ}{kg}[/tex]
Follow the ideal gas table.
The [tex]u_2= 298.33\ \frac{kJ}{kg}[/tex] and between temperature [tex]T =410 \ K \ and\ T=240\ K.[/tex]
Interpolate
[tex]\frac{420-410}{u_{240\ k} -u_{410\ k}}=\frac{420-T_2}{u_{420 k}-u_2}[/tex]
Substitute values from the table.
[tex]\frac{420-410}{300.69-293.43}=\frac{420-T_2}{{u_{420 k}-u_2}}\\\\T_2=416.74\ K\\\\=143.74^{\circ} \ C\\\\[/tex]
For point b:
Consider the ideal gas equation. therefore, p is pressure, V is the volume, m is mass of gas. [tex]\bar{R} \ is\ \frac{R}{M}[/tex] (M is the molar mass of the gas that is [tex]28.97 \ \frac{kg}{mol}[/tex] and R is gas constant), and T is the temperature.
[tex]n=\frac{pV}{TR}\\\\[/tex]
[tex]=\frac{(1.01 \times 10^5 \ Pa) \times (10\ L) (\frac{10^{-3} \ m^3}{1\ L})}{(416.74 K) (\frac{8.314 \frac{J}{mol.k} }{2897\ \frac{kg}{mol})}}\\\\=8.36\ g\\\\[/tex]
For point c:
Entropy is given by the following formula:
[tex]\Delta S = mC_v \In \frac{T_2}{T_1}\\\\=0.00836 \ kg \times 1.005 \times 10^{3} \In (\frac{416.74\ K}{298.15\ K})\\\\=2.77 \ \frac{J}{K}[/tex]
Which quantities below of a solid object on this planet are NOT the same as on Earth?
Choose all
possible answers.
Weight
Mass
Volume
Density
Acceleration when it falls vertically.
Color
Answer:
Weight, acceleration when it falls vertically, are not same as that of earth.
Explanation:
Weight of the object is given by the product of mass of the object and the acceleration due to gravity of the planet.
So, the weight of object is not same as that on earth.
The mass is defined as the amount of matter contained in the object.
So, the mass of the object is same as that of earth.
The volume of the object is defined as the space occupied by the object.
So, the volume of the object is same as that of earth.
The density is defined as the ratio of mass of the object to its volume.
So, the density of the object is same as that of earth.
The acceleration due to gravity on a planet depends on the mass of planet and radius of planet.
So, the acceleration is not same as that of earth.
The color of the object is its characteristic.
It is same as that of earth.
