An unstretched ideal spring hangs vertically from a fixed support. A 0.4 kg object is then attached to the lower end of the spring. The object is pulled down to a distance of 0.35 m below the unstretched position and released from rest at time t= 0. A graph of the subsequent vertical position y of the lower end of the spring as a function of t is given above, where y= 0 when the spring was initially unstretched. At which time is the upward velocity of the object the greatest?

The color orange has a wavelength of 590 nm. The energy of an orange photon is approximately 0.337 eV.

The correct answer is option E.

To calculate the energy of a photon, we can use the equation:

E = (hc) / λ

where E is the energy of the photon, h is the Planck's constant (6.626 x [tex]10^-^3^4[/tex]J·s or 6.626 x[tex]10^-^1^9^[/tex] eV·s), c is the speed of light (3.00 x [tex]10^8[/tex] m/s), and λ is the wavelength of the light.

Given that the wavelength of orange light is 590 nm (or 590 x [tex]10^-^9[/tex]m), we can substitute the values into the equation:

E = [(6.626 x[tex]10^-^1^9^[/tex] eV·s) x (3.00 x [tex]10^8[/tex] m/s)] / (590 x[tex]10^-^9[/tex]m)

E = (1.9878 x [tex]10^-^1^0[/tex]eV·m) / (590 x [tex]10^-^9[/tex] m)

E = 3.3695 x [tex]10^-^1[/tex] eV

For more such information on: wavelength

https://brainly.com/question/4881111

#SPJ8

The question probable may be:

The color orange has a wavelength of 590 nm. What is the energy of an orange photon? (h = 6.626 x [tex]10^-^1^9^[/tex], 1 eV = 1.6 x[tex]10^-^1^9^[/tex]J)

A) 2.81 eV

B) 3.89 eV

C) 2.10 eV

D) 2.78 eV

E)  0.337 eV

Answer:

499.7 J

Explanation:

Since total mechanical energy is conserved,

U₁ + K₁ + W₁ = U₂ + K₂ + W₂ where U₁ = potential energy at bottom of incline = mgh₁, K₁ = kinetic energy at bottom of incline = 1/2mv₁² and W₁ = work done by friction at bottom of incline, and U₂ = potential energy at top of incline = mgh₂, K₁ = kinetic energy at top of incline = 1/2mv₂² and W₂ = work done by friction at top of incline. m = mass = 4 kg, h₁ = 0 m, v₁ = 21.3 m/s, W₁ = 0 J, h₂ = radius of circular ramp = 10 m, v₂ = 2.8 m/s, W₂ = unknown.

So, U₁ + K₁ + W₁ = U₂ + K₂ + W₂

mgh₁ + 1/2mv₁²  + W₁ = mgh₂ + 1/2mv₂²  + W₂

Substituting the values of the variables into the equation, we have

mgh₁ + 1/2mv₁²  + W₁ = mgh₂ + 1/2mv₂²  + W₂

4 kg × 9.8 m/s²(0) + 1/2 × 4 kg × (21.3 m/s)²  + 0 = 4 kg × 9.8 m/s² × 10 m + 1/2 × 4 kg × (2.8 m/s)²  + W₂

0 + 2 kg × 453.69 m²/s² = 392 kgm²/s² + 2 kg × 7.84 m²/s²  + W₂

907.38 kgm²/s² = 392 kgm²/s² + 15.68 kgm²/s²  + W₂

907.38 kgm²/s² = 407.68 kgm²/s² + W₂

W₂ = 907.38 kgm²/s² - 407.68 kgm²/s²

W₂ = 499.7 kgm²/s²

W₂ = 499.7 J

Since friction is a non-conservative force, the work done by all the non-conservative forces is thus W₂ = 499.7 J

Answer: static electricity

Explanation:

When the plastic ruler is rubbed, friction opposes the motion and causes the transfer of electron from one surface to another such that plastic becomes negatively charged. When ruler is brought nearer to the paper, it induces the   positive charge in the piece of paper.

Answer:

Things you should do for your family

things you shouldn't

Answer:

No of proton is 13 and nucleus is 13

Answer:

Newton's law of cooling says that the temperature of a body changes at a rate proportional to the difference between its temperature and that of the surrounding medium (the ambient temperature); dT/dt = -K(T - Tₐ) where T = the temperature of the body (°C), t = time (min), k = the proportionality constant (per minute),

Explanation:

Answer:

Power = 70 W

Explanation:

Given that,

Force, F = 70 N

Height, h = 5 m

Time, t = 5 s

We need to find the power of the object. We know that,

Power = work done/time

Put all the values,

[tex]P=\dfrac{Fd}{t}\\\\P=\dfrac{70\times 5}{5}\\\\P=70\ W[/tex]

So, the required power is 70 W.

Explanation:

The logarithmic damping decrement of a mathematical pendulum is DeltaT=0.5. How will the amplitude of oscillations decrease during one full oscillation of the pendulum

Answer:

time of fall is 1.75 s and the velocity with which it strikes the water is 17.15 m/s.

Explanation:

Height, h =  15 m

Newton's second law

Force = mass x acceleration

The unit of gravitational force is Newton and the value is m x g.

where, m is the mas and g is the acceleration due to gravity.  

Let the time of fall is t.

Use second equation of motion

[tex]s= u t +0.5 at^2\\\\15 = 0 +0.5\times 9.8\times t^{2}\\\\t = 1.75 s[/tex]

Let the final speed is v.

Use third equation of motion

[tex]v^2 = u^2 + 2 a s\\\\v^2 = 0 + 2 \times 9.8\times 15\\\\v =17.15 m/s[/tex]

Answer:

We can also prove the conservation of mechanical energy of a freely falling body by the work-energy theorem, which states that change in kinetic energy of a body is equal to work done on it. i.e. W=ΔK. And ΔE=ΔK+ΔU. Hence the mechanical energy of the body is conserved

Explanation:

Answer:

The angle is 4.1 rad.

Explanation:

The centripetal acceleration (α) is given by:

[tex] \alpha = \omega^{2} r [/tex]    (1)                  

Where:

ω: is the angular velocity  

r: is the radius

And the tangential acceleration (a) is:                      

[tex] a = \alpha r [/tex]      (2)

Since the magnitude of "α" is 8.2 times the magnitude of "a" (equating (2) and (1)) we have:

[tex] \omega^{2} r = 8.2\alpha r   [/tex]

[tex] \omega^{2} = 8.2\alpha [/tex]    (3)      

Now, we can find the angle with the following equation:

[tex] \omega_{f}^{2} = \omega_{0}^{2} + 2\alpha \Delta \theta [/tex]

Where:

[tex] \omega_{f}[/tex]: is the final angular velocity                                                                              [tex] \omega_{0}[/tex]: is the initial angular velocity = 0 (it starts from rest)

[tex]\Delta \theta[/tex]: is the angle

[tex] \omega^{2} = 2\alpha \Delta \theta [/tex]     (4)    

By entering equation (3) into (4) we can calculate the angle:

[tex] 8.2\alpha = 2\alpha \Delta \theta [/tex]

[tex] \Delta \theta = 4.1 rad [/tex]

Therefore, the angle is 4.1 rad.

I hope it helps you!                  

Answer:

The tub turns 37.520 revolutions during the 25-second interval.

Explanation:

The total number of revolutions done by the tub of the washer ([tex]\Delta n[/tex]), in revolutions, is the sum of the number of revolutions done in the acceleration ([tex]\Delta n_{1}[/tex]), in revolutions, and deceleration stages ([tex]\Delta n_{2}[/tex]), in revolutions:

[tex]\Delta n = \Delta n_{1} + \Delta n_{2}[/tex] (1)

Then, we expand the previous expression by kinematic equations for uniform accelerated motion:

[tex]\Delta n = \frac{1}{2}\cdot ( \ddot n_{1}\cdot t_{1}^{2} - \ddot n_{2} \cdot t_{2}^{2})[/tex] (1b)

Where:

[tex]\ddot n_{1}, \ddot n_{2}[/tex] - Angular accelerations for acceleration and deceleration stages, in revolutions per square second.

[tex]t_{1}, t_{2}[/tex] - Acceleration and deceleration times, in seconds.

And each acceleration is determined by the following formulas:

Acceleration

[tex]\ddot n_{1} = \frac{\dot n}{t_{1}}[/tex] (2)

Deceleration

[tex]\ddot n_{2} = -\frac{\dot n}{t_{2} }[/tex] (3)

Where [tex]\dot n[/tex] is the maximum angular velocity of the tub of the washer, in revolutions per second.

If we know that [tex]\dot n = 3\,\frac{rev}{s}[/tex], [tex]t_{1} = 13\,s[/tex] and [tex]t_{2} = 12\,s[/tex], then the quantity of revolutions done by the tub is:

[tex]\ddot n_{1} = \frac{3\,\frac{rev}{s} }{13\,s}[/tex]

[tex]\ddot n_{1} = 0.231\,\frac{rev}{s^{2}}[/tex]

[tex]\ddot n_{2} = -\frac{3\,\frac{rev}{s} }{12\,s}[/tex]

[tex]\ddot n_{2} = -0.25\,\frac{rev}{s^{2}}[/tex]

[tex]\Delta n = \frac{1}{2}\cdot ( \ddot n_{1}\cdot t_{1}^{2} + \ddot n_{2} \cdot t_{2}^{2})[/tex]

[tex]\Delta n = \frac{1}{2}\cdot \left[\left(0.231\,\frac{rev}{s^{2}} \right)\cdot (13\,s)^{2}-\left(-0.25\,\frac{rev}{s^{2}} \right)\cdot (12\,s)^{2}\right][/tex]

[tex]\Delta n = 37.520\,rev[/tex]

The tub turns 37.520 revolutions during the 25-second interval.

a. The athlete's velocity just before reaching the pad is [tex]35.21m/s[/tex]

b. The constant force exerted on the pole vaulter is 6799.52 N

a. We use Newton's equation of motion,

                    [tex]v=u+at\\\\S=ut+\frac{1}{2}at^{2}[/tex]

Where u is initial velocity, v is final velocity, a is acceleration , t is time and S represent distance.

Given that,  s = 5.1 m , t = 0.29s, u = 0

Substitute in above equation.

            [tex]5.1=\frac{1}{2}*a*(0.29)^{2} \\\\a=\frac{5.1*2}{0.084}=121.42m/s^{2}[/tex]

the athlete's velocity, [tex]v=0+121.42*(0.29)=35.21m/s[/tex]

b. The constant force exerted on the pole vaulter due to the collision is given as,             [tex]Force=mass*acceleration[/tex]

             [tex]Force=56*121.42=6799.52N[/tex]

Learn more:

https://brainly.com/question/13532462

Answer:

The cup is acted upon by an unbalanced force which is the acceleration of the car, but before it was an object at rest that stayed at rest.

Explanation:

Newton's first law of motion states, "if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force."

Since the cup is at rest while sitting on top of the car, it stays at rest as the car begins to move. Since the car is accelerating and the cup is not, the cup falls off of the car.

Answer:

43994

Explanation:

Hope this helps!

Answer:

0.32 m.

Explanation:

To solve this problem, we must recognise that:

1. At the maximum height, the velocity of the ball is zero.

2. When the velocity of the ball is 2.5 m/s above the ground, it is assumed that the potential energy and kinetic energy of the ball are the same.

With the above information in mind, we shall determine the height of the ball when it has a speed of 2.5 m/s. This can be obtained as follow:

Mass (m) = constant

Acceleration due to gravity (g) = 9.8 m/s²

Velocity (v) = 2.5 m/s

Height (h) =?

PE = KE

Recall:

PE = mgh

KE = ½mv²

Thus,

PE = KE

mgh = ½mv²

Cancel m from both side

gh = ½v²

9.8 × h = ½ × 2.5²

9.8 × h = ½ × 6.25

9.8 × h = 3.125

Divide both side by 9.8

h = 3.125 / 9.8

h = 0.32 m

Thus, the height of the ball when it has a speed of 2.5 m/s is 0.32 m.

Answer: θ would equal approximately 28.7°

This is a kinematics problem, where one is only given the theta value 13.0° in regards to the range; thus, the problem is testing one's understanding of the relationships between the variables.

Range (aka x) = (v₀ sin (2θ₀))/g, where θ₀ = 13.0°

Now if we multiply the range by 2, we get:

2x = 2((v₀ sin (2θ₀))/g) → to verbalize, if range equates to (v₀ sin (2θ₀))/g, and doubling the range equals twice the product value, then:

2θ = sin⁻¹(2sin(2(13.0° )) = sin⁻¹(2(0.76255845048)) = sin⁻¹ (1.52511690096) = 57.35560850015109°/2 = θ

Thus, θ = 28.67780425

It's been awhile since I did this; though I hope it helped!

I don't know

because I don't know

Answer:

Δd = 7.22 10⁻² m

Explanation:

For this exercise we must use the dispersion relationship of a diffraction grating

           d sin θ = m λ

let's use trigonometry

           tan θ = y / L

how the angles are small

           tant θ = sinθ  /cos θ = sin θ

we substitute  

           sin θ = y / L

          d y / L = m λ

          y = m λ L / d

let's use direct ruler rule to find the distance between two slits

If there are 500 lines in 1 me, what distance is there between two lines

         d = 2/500

        d = 0.004 me = 4 10⁻⁶ m

diffraction gratings are built so that most of the energy is in the first order of diffraction m = 1

let's calculate for each wavelength

λ = 656 nm = 656 10⁻⁹ m

         d₁ = 1 656 10⁻⁹ 1.7 / 4 10⁻⁶

         d₁ = 2.788 10⁻¹ m

λ = 486 nm = 486 10⁻⁹ m

         d₂ = 1 486 10⁻⁹ 1.7 / 4 10⁻⁶

         d₂ = 2.066 10⁻¹ m

the distance between the two lines is

         Δd = d1 -d2

         Δd = (2,788 - 2,066) 10⁻¹

         Δd = 7.22 10⁻² m

Answer:

I just noticd i dont speak this launguage

Explanation:

Answer:

The maximum magnetic force is 2.637 x 10⁻¹² N

Explanation:

Given;

Power, P = 8.25 m W = 8.25 x 10⁻³ W

charge of the radiation, Q = 1.12 nC = 1.12 x 10⁻⁹ C

speed of the charge, v = 314 m/s

area of the conecntration, A = 1.23 mm² = 1.23 x 10⁻⁶ m²

The intensity of the radiation is calculated as;

[tex]I = \frac{P}{A} \\\\I = \frac{8.25 \times 10^{-3} \ W}{1.23 \ \times 10^{-6} \ m^2} \\\\I = 6,707.32 \ W/m^2[/tex]

The maximum magnetic field is calculated using the following intensity formula;

[tex]I = \frac{cB_0^2}{2\mu_0} \\\\B_0 = \sqrt{\frac{2\mu_0 I}{c} } \\\\where;\\\\c \ is \ speed \ of \ light\\\\\mu_0 \ is \ permeability \ of \ free \ space\\\\B_0 \ is \ the \ maximum \ magnetic \ field\\\\B_0 = \sqrt{\frac{2 \times 4\pi \times 10^{-7} \times 6,707.32 }{3\times 10^8} } \\\\B_0 = 7.497 \times 10^{-6} \ T[/tex]

The maximum magnetic force is calculated as;

F₀ = qvB₀

F₀ = (1.12 x 10⁻⁹) x (314) x (7.497 x 10⁻⁶)

F₀ = 2.637 x 10⁻¹² N

Answer:

because it is helpful to human beings I think

Answer:

9 joules of heat energy was produced

Explanation: there is no acceleration therefore its not a kinetic energy

Energy= force × distance

= 3×3

=9

Answer:

the person  is sitting 1.5 m from the left end of the board

Explanation:

Given the data in the question;

Wb = 125 N

Wm = 500 N

T₂ = 250 N

Now, we know that;

T₁ + T₂ = Wb + Wm

T₁ + 250 = 125 + 500

T₁ = 125 + 500 - 250

T₁ = 375 N

so tension of the left chain is 375 N.

Now, taking torque about the left end

500 × d + 125 × 2 = 250 × 4

500d + 250 = 1000

500d = 1000 - 250

500d = 750

d = 750 / 500

d = 1.5 m

Therefore, the person  is sitting 1.5 m from the left end of the board.

Answer:

[tex]R _{t} = R _{0}( \alpha t + 1) \\ = 4 \times {10}^{ - 3} (3.9 \times {10}^{ - 3} \times 20 + 1) \\ = 4 \times {10}^{ - 3} (1.078) \\ = 4.312 \times {10}^{ - 3} \: Ω[/tex]

Answer:

a. 59 ev. helpful answer

Answer: 31.89seconds

Explanation:

Based on the information given, we are meant to calculate deceleration which will be:

t = V/a

where, a = mg

Therefore, t = V/mg

t = 25/0.08 × 9.8

t = 25/0.784

t = 31.89seconds

Therefore, the time that it will take before the hockey puck slides to a stop is 31.89seconds.

Answer:

Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement. Put another way, speed is a scalar value, while velocity is a vector. ... In its simplest form, average velocity is calculated by dividing change in position (Δr) by change in time (Δt).

Explanation: