answer all questions below. 50 points, grade 9 math

Essay Definition of Citizenship:

In the literal sense a person who lives in a city is said to be a citizen. But in political science we use this terminal different sense. To find the real meaning of the term we are to go back to ancient Greece. Aristotle, the father of political science, called a person a citizen who would take a direct and active part in the administration of the state.

Since the states in ancient Greece were as small as the cities of Greece it was possible for the residents of the city-state to make law, to adjudicate and even enforce the law. These citizens did not include the slaves, women and manual workers. In such a case the number of the citizens was just half of the entire population. The position was not very different in the medieval Europe. There were serfs in the place of the slaves.

The position is quite different in modern nation-states, where all adult people are citizens who need not take an active part in the administration of the country, because it is not possible for the entire population of a vast country to meet together and make law and interpret it or enforce it.

9514 1404 393

Answer:

  $11,988

Step-by-step explanation:

A graphing calculator gives you the answer easily.

The minimum unit cost is $11,988.

__

The equation for unit cost can be put into vertex form to find the minimum.

  C(x) = 0.7x^2 -210x +27738

  C(x) = 0.7(x^2 -300x +150^2) +27738 -0.7(150^2)

  C(x) = 0.7(x -150)^2 -11,988

This is vertex form:

  C(x) = a(x -h)^2 +k . . . . . . . where (h, k) is the vertex.

The vertex of this cost function is (150, 11,988).

The minimum unit cost occurs when 150 engines are produced. That unit cost is $11,988.

Answer:

the answer is $11,988

Step-by-step explanation:

:)

Answer:

34 because 50 percent of 68 is 34

Answer:

There are 34 red marbles in the bin

Step-by-step explanation:

50% is basically 1/2. So half of 68 is 34.

Answer:

Use your resources wisely

Step-by-step explanation:

Answer:

[tex] \frac{2}{3} x + 1 = x \\ \frac{1}{3} x = 1 \\ x = 3 \\ y = 3[/tex]

X=3,y=3

Answer:

you are correct do not say any other answer

Answer:

The answer is either

y=50000 x 0.8^x

or

y=50000(20%)^x but this just seems wrong

Step-by-step explanation:

Answer:

83.6 degrees

Step-by-step explanation:

Answer:

228

Step-by-step explanation:

ANOTHER QUESTOIn?

Answer:

Don Abel debe construir un cuadrado con lados de 25 metros de longitud.

Step-by-step explanation:

Geométricamente hablando, el área y el perímetro del rectángulo rodeado por el cerco son representadas por las siguientes fórmulas:

[tex]A = w\cdot l[/tex] (1)

[tex]p = 2\cdot (w+l)[/tex] (2)

Donde:

[tex]A[/tex] - Área, en metros cuadrados.

[tex]p[/tex] - Perímetro, en metros.

[tex]w[/tex] - Ancho, en metros.

[tex]l[/tex] - Longitud, en metros.

Puesto que el área a cercar debe ser la máxima posible y la longitud disponible de malla es de 100 metros, cabe despejar el ancho en (2):

[tex]w = \frac{p}{2}-l[/tex]

Ahora, aplicamos esta expresión en (1) y expandimos la expresión resultante:

[tex]A = \left(\frac{p}{2}-l\right) \cdot l[/tex]

[tex]A = \frac{p\cdot l}{2} -l^{2}[/tex] (3)

A continuación, obtenemos la primera y segunda derivada de (3):

[tex]A' = \frac{p}{2}-2\cdot l[/tex] (4)

[tex]A'' = -2[/tex] (5)

Igualando (4) a cero, tenemos que el valor crítico de la longitud del rectángulo es:

[tex]\frac{p}{2}-2\cdot l = 0[/tex]

[tex]2\cdot l = \frac{p}{2}[/tex]

[tex]l = \frac{p}{4}[/tex]

Por (5), sabemos que ese valor crítico está asociado al área máxima.

Si sabemos que [tex]p = 100\,m[/tex], entonces la longitud del rectángulo es:

[tex]l = 25\,m[/tex]

Ahora, tenemos el ancho de la figura por (2):

[tex]w = \frac{p}{2}-l[/tex]

[tex]w = 25\,m[/tex]

En consecuencia, don Abel debe construir un cuadrado con lados de 25 metros de longitud.

Answer:

1, 2

Step-by-step explanation:

the mode is the ones that appear the most in a data set, so since 1 and 2 appear 4 times each, they are the two modes.

Answer:

Step-by-step explanation:

Expressing in simplest radical form just means simplifying a radical so that there are no more square roots, cube roots, 4th roots, etc left to find. It also means removing any radicals in the denominator of a fraction.

mark me as brill

Answer:

24

Step-by-step explanation:

Finding the lengths of a Triangle is [tex]a^{2}[/tex] + [tex]b^{2}[/tex] = [tex]c^{2}[/tex]

Your triangle is [tex]7^{2}[/tex] + [tex]b^{2}[/tex] = [tex]25^{2}[/tex]

Which is 49 + b = 625

Subtract the difference 625 - 49. then you get the following

b = 576

Finally find the square root of this number and that's your answer: 24

Answer:

by using Pythagoras law

third side =√(25²-7²)=24

Answer:

yes

Step-by-step explanation:

it said it is a perpendicular BISECTOR, H is the mid point of KI, HK = 7

[tex]\huge{\underline{\underline{\boxed{\sf{\red{Answer࿐}}}}}}[/tex]

Answer:

direction

Step-by-step explanation:

Answer:

254.47

Step-by-step explanation:

1/4[tex]\pi[/tex]d^2

Answer:

the price of adult ticket and student ticket be $10.50 and $8.25 respectively

Step-by-step explanation:

Let us assume the price of adult ticket be x

And, the price of student ticket be y

Now according to the question

2x + 2y = $37.50

x + 3y = $35.25

x = $35.25 - 3y

Put the value of x in the first equation

2($35.25 - 3y) + 2y = $37.50

$70.50 - 6y + 2y = $37.50

-4y = $37.50 - $70.50

-4y = -$33

y = $8.25

Now x = $35.25 - 3($8.25)

= $10.5

Hence, the price of adult ticket and student ticket be $10.50 and $8.25 respectively

Answer:

We can write out 3! (three factorial) as 3x2x1, and we can write out 5! as 5x4x3x2x1. This means that, since 3x2x1 is on the top and the bottom of the fraction, it cancels out. This leaves us with 1 on top, and 4x5=20 on the bottom.

Step-by-step explanation:

can you please help me with my question

Answer:

[tex]Area= 36g^6h^{10}[/tex]

Step-by-step explanation:

Given

[tex]Length = 6g^3h^5[/tex]

Required

Determine the area as a monomial

This is calculated as:

[tex]Area = Length * Length[/tex]

[tex]Area= 6g^3h^5*6g^3h^5[/tex]

This can be rewritten as:

[tex]Area= 6*6*g^3*g^3*h^5*h^5[/tex]

Apply law of indices

[tex]Area= 36*g^6*h^{10}[/tex]

[tex]Area= 36g^6h^{10}[/tex]

Answer:

A

Step-by-step explanation:

because the sky is blue

The length of AC after dilation will be 20. Then the measure of the angle ∠A' will be 37°.

We have given that,

AABC is dilated by a factor of 4 to produce AA'B'C'.

Dilation is the process of increasing the size of an item without affecting its form. Depending on the scale factor, the object's size can be raised or lowered.

The triangle ΔABC is dilated by a factor of 4 to produce the triangle ΔA'B'C'.

Then the length of AC after dilation. We have

A'C' = scale factor x AC

A'C' = 4 x 5

A'C' = 20

Then the measure of the angle ∠A' will be

There is no effect of dilation on the angle.

∠A = ∠A' = 37°

Thus, the correct option is A.

More about the dilation link is given below.

brainly.com/question/2856466

#SPJ5

Answer:

a) 20ft

Step-by-step explanation:

just multiply the model length and the scale factor

Answer:

x=6

Step-by-step explanation:

6x+4=2x+28

4x=24

x=6

Answer:

m = -1, b = 5.

Step-by-step explanation:

We can find the slope, m, by plugging in our coordinates into the slope formula: [tex]\frac{y2-y1}{x2-x1} =\frac{2-7}{3-(-2)}=\frac{-5}{5}=-\frac{5}{5}=-\frac{1}{1}=-1[/tex]. That gives us the slope. Now we can fill that in the slope intercept formula: [tex]y=-1x+b[/tex]. We know one of the coordinates and the slope, which allows to find the y-intercept. We know that for every 1 unit down on the line, we move 1 unit right, and vice versa. Meaning we can just count down (or up in this case), so, (-2, 7), (-1, 6), (0, 5). Therefore, our y intercept is 5.

Answer:

The angles of A and B are 45 degrees. This is true because the other angle is a right angle (90 degrees) and if you are making a triangle the degrees of the sides have to = 180 to be a complete triangle. The triangle is complete, so I took 180 – 90 = 90 ÷ 2 = 45.

The angle of C is 115 because it is a supplementary angle. A supplementary angle is an angle that has two angles with a sum of 180 degrees and 180 – 65 = 115The angles of A and B are 45 degrees. This is true because the other angle is a right angle (90 degrees) and if you are making a triangle the degrees of the sides have to = 180 to be a complete triangle. The triangle is complete, so I took 180 – 90 = 90 ÷ 2 = 45.

The angle of C is 115 because it is a supplementary angle. A supplementary angle is an angle that has two angles with a sum of 180 degrees and 180 – 65 = 115The angles of A and B are 45 degrees. This is true because the other angle is a right angle (90 degrees) and if you are making a triangle the degrees of the sides have to = 180 to be a complete triangle. The triangle is complete, so I took 180 – 90 = 90 ÷ 2 = 45.

The angle of C is 115 because it is a supplementary angle. A supplementary angle is an angle that has two angles with a sum of 180 degrees and 180 – 65 = 115The angles of A and B are 45 degrees. This is true because the other angle is a right angle (90 degrees) and if you are making a triangle the degrees of the sides have to = 180 to be a complete triangle. The triangle is complete, so I took 180 – 90 = 90 ÷ 2 = 45.

The angle of C is 115 because it is a supplementary angle. A supplementary angle is an angle that has two angles with a sum of 180 degrees and 180 – 65 = 115The angles of A and B are 45 degrees. This is true because the other angle is a right angle (90 degrees) and if you are making a triangle the degrees of the sides have to = 180 to be a complete triangle. The triangle is complete, so I took 180 – 90 = 90 ÷ 2 = 45.

The angle of C is 115 because it is a supplementary angle. A supplementary angle is an angle that has two angles with a sum of 180 degrees and 180 – 65 = 115The angles of A and B are 45 degrees. This is true because the other angle is a right angle (90 degrees) and if you are making a triangle the degrees of the sides have to = 180 to be a complete triangle. The triangle is complete, so I took 180 – 90 = 90 ÷ 2 = 45.

The angle of C is 115 because it is a supplementary angle. A supplementary angle is an angle that has two angles with a sum of 180 degrees and 180 – 65 = 115The angles of A and B are 45 degrees. This is true because the other angle is a right angle (90 degrees) and if you are making a triangle the degrees of the sides have to = 180 to be a complete triangle. The triangle is complete, so I took 180 – 90 = 90 ÷ 2 = 45.

The angle of C is 115 because it is a supplementary angle. A supplementary angle is an angle that has two angles with a sum of 180 degrees and 180 – 65 = 115

Step-by-step explanation:

Answer:

21

Step-by-step explanation:

UMMMMMMMMMMMMMMM I don't know

[tex](x - a)(x - b)[/tex]

Step-By-Step Explanations:

1) Factor out the common term in the first two terms, then in the last two terms.

[tex]x(x - a) - b(x - a)[/tex]

2) Factor out the common term x - a.

[tex](x - a)(x - b)[/tex]

Therefor, the answer is ( x - a ) ( x - b ).

Answer: 4 is the scaling increment

Step-by-step explanation:

12/3 = 4

8/2 = 4

Answer:

25.13

Step-by-step explanation:

To find the diameter C = 2 π x r