Answer:
Depends on the reaction.
Explanation:
Hello,
In this case, the answer is depends on the reaction since the ratios between the rates of both consumption and formation depend upon the stoichiometric coefficients in the chemical reaction. For instance, for the reaction:
A -> 2B
The relationship is:
[tex]\frac{1}{-1}r_A =\frac{1}{2} r_B[/tex]
Therefore, we can see that the rate of consumption of A half the rate of formation of B, but is we consider the following chemical reaction:
2A -> B
The relationship is:
[tex]\frac{1}{-2}r_A =\frac{1}{1} r_B[/tex]
Therefore we can see that the rate of consumption of A doubles the rate of consumption of B.
Best regards.
f the Ksp for HgBr2 is 2.8×10−14, and the mercury ion concentration in solution is 0.085 M, what does the bromide concentration need to be for a precipitate to occur?
Answer:
0.057 M
Explanation:
Step 1: Given data
Solubility product constant (Ksp) for HgBr₂: 2.8 × 10⁻⁴
Concentration of mercury (II) ion: 0.085 M
Step 2: Write the reaction for the solution of HgBr₂
HgBr₂(s) ⇄ Hg²⁺(aq) + 2 Br⁻
Step 3: Calculate the bromide concentration needed for a precipitate to occur
The Ksp is:
Ksp = 2.8 × 10⁻⁴ = [Hg²⁺] × [Br⁻]²
[Br⁻] = √(2.8 × 10⁻⁴/0.085) = 0.057 M
If 37.5 mL of 0.100 M calcium chloride reacts completely with aqueous silver nitrate, what is the mass of AgCl (MM
Answer:
OPTION C is correct
C) 1.07 g
Explanation:
CaCl2(aq) + 2 AgNO3(aq) → 2 AgCl(s) + Ca(NO3)3(aq)
But we know molarity molarity= number of moles of solute/ volume of the solution
M= n/V
From the equation above
number of moles of Cacl2 = (37.5 ×0 .100 × 10^-3) = 0.00375 moles.
Then
1 mole of Cacl2 yields 2 moles of Agcl2
0.00375 moles of Cacl2 will produce let say Y.
Y= (0.00375 ×2)/1
= 0.0075 moles.
Number of moles of Agcl2 = mass /molar mass of Agcl
Molar mass of Agcl = 178
Then mass = 178 ×0.0075 = 1.047
Therefore, the mass of agcl precipitate is
1.07 g
Calculate the pH of a solution that is 0.210 M in nitrous acid (HNO2) and 0.290 M in potassium nitrite (KNO2). The acid dissociation constant of nitrous acid is 4.50 × 10-4.
Answer:
pH = 3.49
Explanation:
We have a buffer system formed by a weak acid (HNO₂) and its conjugate base (NO₂⁻ coming from KNO₂). We can calculate the pH of a buffer ssytem using the Henderson-Hasselbach equation.
pH = pKa + log [base] / [acid]
pH = -log Ka + log [NO₂⁻] / [HNO₂]
pH = -log 4.50 × 10⁻⁴ + log 0.290 M / 0.210 M
pH = 3.49
The pH of the solution containing 0.210 M nitrous acid (HNO₂) and 0.290 M potassium nitrite (KNO₂) is 3.49
We'll begin by calculating the the pKa of acid. This can be obtained as follow:
Acid dissociation constant (Ka) = 4.50×10¯⁴
pKa =?pKa = –Log Ka
pKa = –Log 4.50×10¯⁴
pKa = 3.35Finally, we shall determine the pH of the solution.pKa = 3.35
Concentration of HNO₂, [HNO₂] = 0.210 M
Concentration of KNO₂, [KNO₂] = 0.290 M
pH =?The pH of the solution can obtain by using the Henderson-Hasselbach equation as illustrated below:
pH = pKa + log [base] / [acid]pH = pKa+ log [NO₂⁻] / [HNO₂]
pH = 3.35 + log (0.290 / 0.210)
pH = 3.49Thus, the pH of the solution is 3.49
Learn more: https://brainly.com/question/15911738
Compare and contrast an electrolytic cell with a voltaic cell. Provide one example where both are present in daily life.
Answer:
ELECTROLYTIC CELL
An electrochemical cell in which a non-spontaneous chemical reaction takes place when electric current is passed through the solution,is called an electrolytic cell.
EXAMPLE
Nelsons cell and Downs cell
VOLTAIC CELL OR GALVANIC CELL
The electrochemical cell in which a spontaneous chemical reaction takes place and generates electric current is called galvanic and voltaic cell.
EXAMPLE
Daniel cell
Explanation:
Electrolytic cell by the non-spontaneous reactions covert the chemical energy into electical and volataic cells are those in which spontaneous redox reaction takes place.
What is cell?Cell is a device which converts chemical energy into electrical energy.
Electrolytic Cell: An electrolytic cell is an electrochemical cell in which a non-spontaneous redox chemical reaction occurs when an electric current is conducted through the solution.
Example- Electrolysis of sodium chloride, by which formation of sodium metal and chlorine gas takes place.
Voltaic cell: Voltaic cells are electrochemical cells in which a spontaneous redox chemical reaction occurs and creates electric current. These cells are also known by the name of Galvanic cells.
Example- It is used in the form of batteries which can be portable easily.
Hence, in electrolytic cells non - spontaneous reaction occur and in voltaic cell spontaneous reaction is occured.
To know more about cells, visit the below link:
https://brainly.com/question/1172236
#SPJ2
A sample of a hydrocarbon is found to contain 7.99g carbon and 2.01g hydrogen. What is the empirical formula for this compound
Answer:
The empirical formulae for the compound is CH3.
"Aqueous solutions of lead nitrate and ammonium chloride are mixed" together. Which statement is correct
Answer:
PbCl₂ will precipitate from solution.
Explanation:
Statements are:
Insufficient information is given.
Both NH4NO3 and PbCl2 precipitate from solution.
No precipitate forms.
PbCl2 will precipitate from solution.
NH4NO3 will precipitate from solution.
The reaction of ammonium chloride (NH₄Cl) with lead nitrate (Pb(NO₃)₂) is:
Pb(NO₃)₂ + 2NH₄Cl → PbCl₂ + 2 NH₄NO₃
Talking of rules of solubility, all nitrates are soluble in water, that means NH₄NO₃ is soluble and no precipitate is formed.
In the same way, all chlorides are soluble except silver chloride and lead chloride. That means:
PbCl₂ (Lead chloride) will precipitate from solution.If we represent the equilibrium as:...N2O4(g) 2 NO2(g) We can conclude that: 1. This reaction is: A. Exothermic B. Endothermic C. Neutral D. More information is needed to answer this question. 2. When the temperature is increased the equilibrium constant, K: A. Increases B. Decreases C. Remains the same D. More information is needed to answer this question. 3. When the temperature is increased the equilibrium concentration of NO2: A. Increases B. Decreases C. Remains the same D. More information is needed to answer this question.
Answer:
1. This reaction is: B. Endothermic.
2. When the temperature is increased the equilibrium constant, K: A. Increases.
3. When the temperature is increased the equilibrium concentration of NO2: A. Increases.
Explanation:
Hello,
In this case, considering the images, we can state that the red color at high temperature is due to the presence of nitrogen dioxide (product) and the lower coloring is due to the presence of dinitrogen tetroxide (reactant) at low temperature.
With the aforementioned, we can conclude that the chemical reaction:
[tex]N_2O_4(g) \rightleftharpoons 2 NO_2(g)[/tex]
Is endothermic since high temperatures favor the formation of the product and the low temperatures favor the consumption of the the reactant. thereby:
1. This reaction is: B. Endothermic.
2. When the temperature is increased the equilibrium constant, K: A. Increases. In this particular case, since the dinitrogen tetroxide has 1 molecule and nitrogen dioxide two molecules in the chemical reaction, the entropy change should be positive, therefore, by increasing the T, the Gibbs free energy of reaction becomes more negative:
[tex]G=H-TS[/tex]
As Gibbs free energy becomes more negative, the equilibrium constant becomes bigger given their relationship:
[tex]K=exp(-\frac{\Delta G}{RT} )[/tex]
3. When the temperature is increased the equilibrium concentration of NO2: A. Increases.
Regards.
"What is the difference between the revertible and nonrevertible rII mutants that Benzer generated?"
Assume you dissolve 0.235 g of the weak benzoic acid, C6H5CO2H in enough water to make 100.0 mL of the solution and then titrate the solution with 0.108 M NaOH. Benzoic acid is a monoprotic acid.
1. What is the pH of the original benzoic acid solution before the titration is started?
2. What is the pH when 7.00 mL of the base is added? (Hint: This is in the buffer region.)
3. What is the pH at the equivalence point?
Answer:
1. pH = 2.98
2. pH = 4.02
3. pH = 8.12
Explanation:
1. Initial molarity of benzoic acid (Molar mass: 122.12g/mol; Ka = 6.14x10⁻⁵) is:
0.235 ₓ (1mol / 122.12g) = 1.92x10⁻³ moles / 0.100L = 0.01924M
The equilibrium of benzoic acid with water is:
C6H5CO2H(aq) + H2O(l) → C6H5O-(aq) + H3O+(aq)
And Ka is defined as the ratio between equilibrium concentrations of products over reactants, thus:
Ka = 6.14x10⁻⁵ = [C6H5O⁻] [H3O⁺] / [C6H5CO2H]
The benzoic acid will react with water until reach equilibrium. And equilibrium concentrations will be:
[C6H5CO2H] = 0.01924 - X
[C6H5O⁻] = X
[H3O⁺] = X
Replacing in Ka:
6.14x10⁻⁵ = [X] [X] / [0.01924 - X]
1.1815x10⁻⁶ - 6.14x10⁻⁵X = X²
1.1815x10⁻⁶ - 6.14x10⁻⁵X - X² = 0
Solving for X:
X = -0.0010→ False solution. There is no negative concentrations
X = 0.0010567M → Right solution.
pH = - log [H3O⁺] and as [H3O⁺] = X:
pH = - log [0.0010567M]
pH = 2.982.
pH of a buffer is determined using H-H equation (For benzoic acid:
pH = pka + log [C6H5O⁻] / [C6H5OH]
pKa = -log Ka = 4.21 and [] could be understood as moles of each chemical
The benzoic acid reacts with NaOH as follows:
C6H5OH + NaOH → C6H5O⁻ + Na⁺ + H₂O
That means NaOH added = Moles C6H5O⁻ And C6H5OH = Initial moles (1.92x10⁻³ moles - Moles NaOH added)
7.00mL of NaOH 0.108M are:
7x10⁻³L ₓ (0.108 mol / L) = 7.56x10⁻⁴ moles NaOH = Moles C₆H₅O⁻
And moles C6H5OH = 1.92x10⁻³ moles - 7.56x10⁻⁴ moles = 1.164x10⁻³ moles C₆H₅OH
Replacing in H-H equation:
pH = 4.21 + log [7.56x10⁻⁴ moles] / [ 1.164x10⁻³ moles]
pH = 4.023. At equivalence point, all C6H5OH reacts producing C6H5O⁻. The moles are 1.164x10⁻³ moles
Volume of NaOH to reach equivalence point:
1.164x10⁻³ moles ₓ (1L / 0.108mol) = 0.011L. As initial volume was 0.100L, In equivalence point volume is 0.111L and concentration of C₆H₅O⁻ is:
1.164x10⁻³ moles / 0.111L = 0.01049M
Equilibrium of C₆H₅O⁻ with water is:
C₆H₅O⁻(aq) + H₂O(l) ⇄ C₆H₅OH(aq) + OH⁻(aq)
Kb = [C₆H₅OH] [OH⁻]/ [C₆H₅O⁻]
Kb = kw / Ka = 1x10⁻¹⁴ / 6.14x10⁻⁵ = 1.63x10⁻¹⁰
Equilibrium concentrations of the species are:
C₆H₅O⁻ = 0.01049M - X
C₆H₅OH = X
OH⁻ = X
Replacing in Kb expression:
1.63x10⁻¹⁰ = X² / 0.01049- X
1.71x10⁻¹² - 1.63x10⁻¹⁰X - X² = 0
Solving for X:
X = -1.3x10⁻⁶ → False solution
X = 1.3076x10⁻⁶ → Right solution
[OH⁻] = 1.3076x10⁻⁶
as pOH = -log [OH⁻]
pOH = 5.88
And pH = 14 - pOH
pH = 8.12What is the frequency of a photon having an energy of 4.91 × 10–17 ? (c = 3.00 × 108 m/s, h = 6.63 × 10–34 J · s)
Answer:
The frequency of the photon is 7.41*10¹⁶ Hz
Explanation:
Planck states that light is made up of photons, whose energy is directly proportional to the frequency of radiation, according to a constant of proportionality, h, which is called Planck's constant. This is expressed by:
E = h*v
where E is the energy, h the Planck constant (whose value is 6.63*10⁻³⁴ J.s) and v the frequency (Hz or s⁻¹).
So the frequency will be:
[tex]v=\frac{E}{h}[/tex]
Being E= 4.91*10⁻¹⁷ J and replacing:
[tex]v=\frac{4.91*10^{-17} J}{6.63*10^{-34} J.s}[/tex]
You can get:
v= 7.41*10¹⁶ [tex]\frac{1}{s}[/tex]= 7.41*10¹⁶ Hz
The frequency of the photon is 7.41*10¹⁶ Hz
Give the formula of each coordination compound. Include square brackets around the coordination complex. Do not include the oxidation state on the metal. Use parentheses only around polyatomic ligands.
For ethylenediamine, use (en) in the formula.
a) sodium hexachloroplatinate(IV)
b) dibromobis(ethylenediamine)cobalt(III) bromide
c) pentaamminechlorochromium(III) chloride
Answer:
sodium hexachloroplatinate(IV)- Na2[PtCl6]
dibromobis(ethylenediamine)cobalt(III) bromide- [Co(en)2Br2]Br
pentaamminechlorochromium(III) chloride-[Cr(NH3)5Cl]Cl2
Explanation:
The formulas of the various coordination compounds can be written from their names taking cognisance of the metal oxidation state as shown above. The oxidation state of the metal will determine the number of counter ions present in the coordination compound.
The number ligands are shown by subscripts attached to the ligand symbols. Remember that bidentate ligands such as ethylenediamine bonds to the central metal ion via two donors.
If the lead concentration in water is 1 ppm, then we should be able to recover 1 mg of lead from _____ L of water.
Answer:
1 L
Explanation:
ppm means parts per million. Generally the relationship between mass and litre is given as;
1 ppm = 1 mg/L
This means that 1 ppm is equivalent to 1 mg of a substance dissolved in 1 L of water.
candium forms the ion Sc3+. How many bromite ions could bond with Sc3+, and what would be the chemical formula?
a.3 bromite ions, Sc(Broa)2
b.2 bromite ions, Sc(BrO4)3
c.3 bromite ions, Sc(Broz)
d.2 bromite ions, Sc (BrO2)2
Answer: 3 bromite ions and [tex]Sc(BrO_2)_3[/tex]
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
Here scandium is having an oxidation state of +3 called as [tex]Sc^{3+}[/tex] cation and bromite is an anion with oxidation state of -1 called as [tex]BrO_2^-[/tex]. Thus 1 Scandium ion combines with three bromite ions and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]Sc(BrO_2)_3[/tex]
Answer:
3 bromite ions and
Explanation:
Which state of matter does this image represent? Image of water Solid Liquid Gas Plasma
Answer:Liquid
Explanation:
Which option draws the correct conclusion from the following case study?
A patient with sickle-cell anemia and a fever goes to the emergency room and is given Tylenol to reduce
the fever. The patient has seizures and dies after taking the Tylenol. The physician writes up this case as
an interesting outcome for a patient with sickle-cell anemia.
The case study's validity is obvious because it describes a real-life situation.
The case study was influenced by bias, and led to incorrect conclusions being drawn
The case study was not intended to produce a generalized conclusion about treatment
Upon reading this case study, physicians should stop treating sickle cell patients with fevers using Tylenol
Answer:
I believe the answer The case study was influenced by bias, and led to incorrect conclusions being drawn. plz correct me if I am wrong
Explanation:
Answer: options B
Explanation:
How many equivalent resonance structures can be drawn for the molecule of SO3 without having to violate the octet rule on the sulfur atom
Answer:
3
Explanation:
Resonance is a valence bond concept put forward by Linus Pauling to explain the fact that the observed properties of a molecule may be as a result of the fact that its actual structure lie somewhere between a given number of structural extremes called canonical structures or resonance structures.
There are three resonance structures for SO3 that obey the octet rule. All the S-O bonds in SO3 are equivalent in these resonance structures.
Seven equivalent resonance structures for the molecular of SO3 can be drawn without breaking the octet rule.
We can arrive at this answer because:
The octet rule is a rule that states that an atom must reach stability when it has eight electrons in the valence layer.This means that in bonds that cause the donation or sharing of electrons between atoms, each atom has eight electrons in the valence layer.In chemistry, resonance is a term that refers to structures created to represent the donation or sharing of electrons between the atoms of a molecule.These structures can be arranged in different ways, as long as they respect the octet rule.In an SO3 molecule, electrons are shared between atoms. This sharing can be done with seven resonance structures.
These structures are shown in the figure below.
More information:
https://brainly.com/question/8155254?referrer=searchResults
0.22 L of HNO3 is titrated to equivalence using 0.18 L of 0.2 MNaOH. What is the concentration of the HNO3?
Answer:
0.16 M
Explanation:
Data provided as per the question is below:-
Volume of [tex]HNO_3[/tex] = 0.22 L
The Volume of NaOH = 0.18 L
Morality of NaOH = 0.2
According to the given situation, the calculation of the concentration of the [tex]HNO_3[/tex] is shown below:-
For equivalence,
Number of the equivalent of [tex]HNO_3[/tex] = Number of equivalents of NaOH
[tex]= \frac{0.18\times0.2}{0.22}[/tex]
[tex]= \frac{0.036}{0.22}[/tex]
= 0.16363 M
or
= 0.16 M
Draw a picture of what you imagine solid sodium chloride looks like at the atomic level. (Do NOT draw Lewis structures.) Make sure to include a key. Then describe what you've drawn and any assumptions you are making.
Answer:
Kindly check the explanation section.
Explanation:
PS: kindly check the attachment below for the required diagram that is the diagram showing solid sodium chloride looks like at the atomic level.
The chemical compound known as sodium chloride, NaCl has Molar mass: 58.44 g/mol, Melting point: 801 °C and
Boiling point: 1,465 °C. The structure of the solid sodium chloride is FACE CENTRED CUBIC STRUCTURE. Also, solid sodium chloride has a coordination number of 6: 6.
In the diagram below, the positive sign shows the sodium ion while the thick full stop sign represent the chlorine ion.
The NaCl has been the ionic structure with an equal number of sodium and chlorine ions bonded.
In the structure, there has been each Na ion bonded with the Cl ions. There has been the transfer of electrons between the structure in order to attain a stable configuration.
The expected structure of the NaCl would be the image attached below.
The image has been the cubic structure of NaCl. With the presence of Na ions at the vertex of the structure, there has been the presence of the Cl ion with every Na ion for the electron transfer.
For more information about the structure of NaCl, refer to the link:
https://brainly.com/question/2729718
Draw the structure of beeswax.beeswax is made from the esterfication of a saturated 16-carbon fatty acid and a 30 carbon straight chain primary alcohol.
Answer:
Triacontyl palmitate
Explanation:
In this case, we have a reaction between an acid and an alcohol. When we put together these kind of compounds an ester is produced. This reaction is called "esterification".
In our case, the alcohol is a structure with 30 carbon in which the "OH" group is bonded on carbon 1. The name of this compound is "n-triacontanol". The acid is a structure in which we have 16 carbon in which the "COOH" group is placed on carbon 1. The name of this compound is "palmitic acid". The ester produced by the acid and the alcohol is "Triacontyl palmitate".
See figure 1.
I hope it helps!
g When considering the effects of temperature on spontaneity, if both ΔH and ΔS are positive, _______. Select the correct answer below: the process is spontaneous at all temperatures
Explanation:
The spontaneity of a system is deduced by the sign of the gibbs free energy value. If it is negative, it means the process / reaction is spontaneous however a positive value indicates the such process is not spontaneous.
Gibbs free energy, enthalpy and entropy are related by the following equation;
ΔG = ΔH - TΔS
A positive value of enthalpy, H and entropy, S means that G would always be a negative value at all temperatures.
Identify the term that matches each electrochemistry definition. The electrode where oxidation occurs Cathode The electrode where reduction occurs Choose... An electrochemical cell powered by a spontaneous redox reaction Choose... An electrochemical cell that takes in energy to carry out a nonspontaneous redox reaction Choose... A chemical equation showing either oxidation or reduction Choose...
Answer:
An electrochemical cell that takes in energy to carry out a nonspontaneous redox reaction
Which of the following pairs of chemical reactions are inverses of each other? Answer options: a. Hydrogenation and alkylation b.Halogenation and hydrolysis c. Ammoniation and alkylation d. Oxidation and reduction
Answer:
d. Oxidation and reduction
Explanation:
For this question we have to remember the definition of each type of reaction:
-) Hydrogenation
In this reaction, we have the addition of hydrogen to a molecule. Usually, an alkene or alkyne. In the example, molecular hydrogen is added to a double bond to produce an alkane.
-) Alkylation
In this reaction, we have the addition of a chain of carbon to another molecule. In the example, an ethyl group is added to a benzene ring.
-) Hydrolysis
In this reaction, we have the breaking of a bond by the action of water. In the example, a water molecule can break the C-O bond in the ester molecule.
-) Halogenation
In this reaction, we have the addition of a halogen (atoms on the VIIIA group). In the example, "Cl" is added to the butene.
-) Ammoniation
In this reaction, we have the addition of the ammonium ion ([tex]NH_4^+[/tex]). In the example, the ammonium ion is added to an acid.
-) Oxidation and reduction
In this reaction, we have opposite reactions. The oxidation is the loss of electrons and the reduction is the gain of electrons. For example:
[tex]Ag^+~+~e^-~->~Ag[/tex] Reduction
[tex]Al~->~Al^+^3~+~3e^-[/tex] Oxidation
Determine whether each phrase describes carboxylic acids or esters.a. Do not form hydrogen bonds amongst themselves and have higher vapor pressureb. Form hydrogen bonds amongst themselves and have lower vapor pressurec. Notable for their pleasant fragrancesd. Their reactions with base are kn. own as saponificationse. Usually have a sour odorf. Their reactions with base are known as neutralizations
Explanation:
a. Esters
b. Carboxylic acids
c. Esters (ethyl hexanoate smells like pineapple)
d. Carboxylic acids (produces a carboxylic salt)
For the given phrases the following description is better.
a. Esters
b. Carboxylic acids
c. Esters (ethyl hexanoate smells like pineapple)
d. Carboxylic acids (produces a carboxylic salt)
Esters and carboxylic acids:An ester is a synthetic compound got from a corrosive in which somewhere around one - OH hydroxyl bunch is supplanted by an - O-alkyl (alkoxy) bunch, as in the replacement response of a carboxylic acid and a liquor.
Carboxylic acid is any of a class of natural mixtures in which a carbon (C) particle is clung to an oxygen (O) molecule by a twofold bond and to a hydroxyl bunch (―OH) by a solitary bond.
Find more information about esters here:
brainly.com/question/9165411
What class of organic product results when 1-heptyne is treated with a mixture of mercuric acetate in aqueous sulfuric acid, and then HOCH2CH2OH with catalytic sulfuric acid
Answer:
2-methyl-2-pentyl-1,3-dioxolane
Explanation:
In this case, we have two reactions:
First reaction:
1-heptyne + mercuric acetate -------> Compound A
Second reaction:
Compound A + HOCH2CH2OH -------> Compound C
First reaction
In the first reaction, we have as a main functional group a triple bond. We have to remember that mercuric acetate in sulfuric acid will produce a ketone. The carbonyl group (C=O) would be placed in the most substituted carbon of the triplet bond (in this case, carbon 2). With this in mind, we will have as a product: heptan-2-one. (See figure 1).
Second reaction
In this reaction, we have as reagents:
-) Heptan-2-one
-) Ethylene-glycol [tex]HOCH_2CH_2OH[/tex]
-) Sulfuric acid [tex]H_2SO_4[/tex]
When we put ethylene-glycol with a ketone or an aldehyde we will form a cyclic acetal. In this case, this structure would be formed on carbon 2 forming 2-methyl-2-pentyl-1,3-dioxolane. (See figure 2).
I hope it helps!
How many cups are in five gallons?
Answer:
In 5 US liquid gallons, there are 80 cups.
Explanation:
To get from gallons to cups, just multiply the amount of gallons you have by 16.
Draw the structure for the organic radical species produced by reaction of the compound with a chlorine atom. Assume reaction occurs at the weakest C-H bond.
Answer:
See explanation
Explanation:
The reaction of chlorine with the pictured compound will occur via free radical mechanism. The stability of the free radical formed will depend on its structure.
The order of stability of free radicals is methyl < primary < secondary < tertiary. Hence a tertiary carbon free radical is the most stable.
Looking at the compound, the radical will form at the position shown in the image attached since it will lead to a secondary free radical which is more stable.
The structure that should be drawn is shown below.
The reaction of chlorine:It should be within the pictured compound that will arise via a free radical mechanism. The stability should be based on the structure. The stability of the order of free radicals should be methyl < primary < secondary < tertiary. Thus, a tertiary carbon free radical should be most stable.
Here look at the compound, the radical should form at the position that should be shown in the image that resulted in the secondary free radical i.e. more stable.
What is the edge length of a face-centered cubic unit cell that is made of of atoms, each with a radius of 154 pm
Answer:
The edge length of a face-centered cubic unit cell is 435.6 pm.
Explanation:
In a face-centered cubic unit cell, each of the eight corners is occupied by one atom and each of the six faces is occupied by a single atom.
Hence, the number of atoms in an FCC unit cell is:
[tex] 8*\frac{1}{8} + 6*\frac{1}{2} = 4 atoms [/tex]
In a face-centered cubic unit cell, to find the edge length we need to use Pythagorean Theorem:
[tex] a^{2} + a^{2} = (4R)^{2} [/tex] (1)
Where:
a: is the edge length
R: is the radius of each atom = 154 pm
By solving equation (1) for "a" we have:
[tex] a = 2R\sqrt{2} = 2*154 pm*\sqrt{2} = 435.6 pm [/tex]
Therefore, the edge length of a face-centered cubic unit cell is 435.6 pm.
I hope it helps you!
Which describes the molecule below
Answer:
Option D. A lipid with three unsaturated fatty acid.
Explanation:
The molecule in the diagram above contains three fatty acid.
A careful observation of the molecule reveals that each of the three fatty acids contains a double bond.
The presence of a double bond in a compound shows that the compound is unsaturated.
Thus, we can say that the molecule is a lipid with three unsaturated fatty acid.
4. Given that the enthalpy of reaction for a system at 298 K is -292 kJ/mol and the entropy for that system is 224 J/mol K, what's the free energy for the system?
A.-87,793 kJ
B.-358 kJ
C.-225 kJ
D. -66,751 kJ
Answer:
[tex]\Delta G=-359\frac{kJ}{mol}[/tex]
Explanation:
Hello,
In this case, we must remember that the Gibbs free energy is defined in terms of the enthalpy, temperature and entropy as shown below:
[tex]\Delta G=\Delta H -T\Delta S\\[/tex]
In such a way, for the given data, we obtain it, considering the conversion from J to kJ for the entropy in order to conserve the proper units:
[tex]\Delta G=-292\frac{kJ}{mol} -(298)(224\frac{J}{mol}*\frac{1kJ}{1000J} )\\\\\Delta G=-359\frac{kJ}{mol}[/tex]
Best regards.
Answer:
B- 358 kj
Explanation: I took the test
PV = nRT. If P = 1 atm, V = 5.0 liter, R = 0.0821 L.atm/mol.K, and T = 293 K; what is the value of n?
Answer:
n = 0.207 mole
Explanation:
We have,
P = 1 atm
V = 5 liter
R = 0.0821 L.atm/mol.K
T = 293 K
We need to find the value of n. The relation is as follows :
PV = nRT
Solving for n,
[tex]n=\dfrac{PV}{RT}\\\\n=\dfrac{1\times 5}{0.0821 \times 293}\\\\n=0.207\ \text{mol}[/tex]
So, the value of n is 0.207 mol.
