Answer:
Its inductance L = 166 mH
Explanation:
Since a current, I = 0.698 A is obtained when a voltage , V = 5.62 V is applied, the resistance of the coil is gotten from V = IR
R = V/I = 5.62/0.698 = 8.052 Ω
Since we have a current of I' = 0.36 A (rms) when a voltage of V' = 35.1 V (rms) is applied, the impedance Z of the coil is gotten from
V₀' = I₀'Z where V₀ = maximum voltage = √2V' and I₀ = maximum current = √2I'
Z = V'/I' = √2 × 35.1 V/√2 × 0.36 V = 97.5 Ω
WE now find the reactance X of the coil from
Z² = X² + R²
X = √(Z² - R²)
= √(97.5² - 8.05²)
= √(9506.25 - 64.8025)
= √9441.4475
= 97.17 Ω
Now, the reactance X = 2πfL where f = frequency of generator = 93.1 Hz and L = inductance of coil.
L = X/2πf
= 97.17/2π(93.1 Hz)
= 97.17 Ω/584.965 rad/s
= 0.166 H
= 166 mH
Its inductance L = 166 mH
. Mass of a man is 40 kg. find his weight (g=9.8 m/s?)
Answer: 392N
Explanation: W=mg
W= 40x9.8
= 392N
Answer:
[tex]\large \boxed{\sf 392.4 \ N}[/tex]
Explanation:
[tex]\sf Weight \ (N) =mass \ (kg) \times acceleration \ of \ gravity \ (m/s^2)[/tex]
[tex]W=mg[/tex]
[tex]W=40 \times 9.81[/tex]
[tex]W= 392.4[/tex]
3) An earth moving machine uses diesel oil, which when burnt will produce 3.0x10 9 J of energy. The work performed by the machine is 2.7x 10 8 J. What is the efficiency of the machine?
Answer:
The answer is below
Explanation:
The efficiency of a machine is the ratio of its output to its input. The efficiency shows how effective the machine by the way it converts the input energy into work. The higher the efficiency of the machine the more effective it is. The efficiency is usually less than 1.
Given that the machine uses diesel oil (input) that can produce 3.0 x 10⁹ J of energy while the work performed by the machine (output) is 2.7 x 10⁸ J. The efficiency is given as:
Efficiency = output / input = 2.7 x 10⁸ J / 3.0 x 10⁹ J = 0.09 = 9%
This means that the machine is not effective because of its low efficiency
if you ran 15 km/hr for 2.5 hours, how much distance would you cover?
Answer: 37.5 km
Explanation:
The question is that
If you ran 15 km/hr for 2.5 hours, how much distance would you cover ?
Where
Speed = 15 km/ hr
Time = 2.5 hours
Using the formula for speed.
Speed = distance/time
Substitute speed and time into the formula
15 = distance/ 2.5
Make distance the subject of formula by cross multiplying.
Distance = 15 × 2.5
Distance = 37.5 km.
A stationary siren creates an 894 Hz
sound. When a motorcyclist is driving
toward it, she hears a 926 Hz sound
How fast is she driving?
(Speed of sound = 343 m/s)
(Unit = m/s)
Answer:
12.3 m/s
Explanation:
The Doppler equation describes how sound frequency depends on relative velocities:
fr = fs (c + vr)/(c + vs),
where fr is the frequency heard by the receiver,
fs is the frequency emitted at the source,
c is the speed of sound,
vr is the velocity of the receiver,
and vs is the velocity of the source.
Note: vr is positive if the receiver is moving towards the source, negative if away.
Conversely, vs is positive if the receiver is moving away from the source, and negative if towards.
Given:
fs = 894 Hz
fr = 926 Hz
c = 343 m/s
vs = 0 m/s
Find: vr
926 = 894 (343 + vr) / (343 + 0)
vr = 12.3
The speed of the car is 12.3 m/s.
Determine whether each sum, difference, product,
or quotient represents a rational number or an
irrational number. Explain how you know without
simplifying
Explanation:
The asked in the Question is missing, although i am assuming the number
as [tex]\frac{6}{23}[/tex] ÷[tex]\frac{\sqrt{2} }{2}[/tex].
The given expression contains an irrational number. So, the quotient will also be an irrational number.
Solving
[tex]\frac{6}{23}\times\frac{\sqrt{2} }{2} \\=\frac{3\sqrt{2} }{23}[/tex]
Which is an irrational number.
Question 1 (2 points)
(01.01 LC)
Which of the following is a characteristic of science? (2 points)
QU
Reproducible by other scientists
Ob
The personal opinion of the scientist
С
Using variable conditions for each test
d
Including only the data that supports a hypothesis
Answer:
Reproducible by other scientists
Explanation:
I just took the test
2. Adelia holds a shiny steel spoon with its back (convex surface) facing her eyes at a distance
of approximately 30 cm. She sees an upright image of herself. However, when the spoon
is changed so that the front (concave surface) of the spoon is facing her eyes, an inverted
image is observed.
(a) Explain this situation.
(b) Why is an upright image not seen on the front surface of the spoon at that distance?
Answer:
(a) The convex mirror image, is always upright at all positions, while images formed by concave mirrors are always inverted when the object distance from the mirror is more than the mirrors focal length.
(b) An upright image is not seen for object at a distance from a concave mirror further than the focal length of the mirror, which is the spoon in the question
Therefore, the location of her eyes of approximately, 30 cm, from the mirror is more than the mirror's focal length
Explanation:
A disk-shaped dough is initially spinning at 2 rotations per second (1 rotation = 360°). As time goes on, it slowly deforms, and is now spinning at a different angular speed. The dough changed radius from 16 cm to 17 cm, and its mass remained constant throughout. What is its final angular speed in degrees/s?
Answer:
10.44° per sec
Explanation:
Initial angular speed N = 2 rotations per minute
converting to rad/s ω = 2πN/60 = (2 x 3.142 x 2)/60 = 0.21 rad/s
the initial radius of the disk = 16 cm = 0.16 m
final radius = 17 cm = 0.17 m
Angular momentum = [tex]I[/tex]ω
where [tex]I[/tex] = rotational inertia = mass x [tex]radius^{2}[/tex]
ω = angular speed
For the initial case
[tex]I[/tex] = m x [tex]0.16^{2}[/tex] = 0.0256m
Angular momentum = 0.0256m x 0.21 = 0.0054m
For second case
[tex]I[/tex] = m x [tex]0.17^{2}[/tex] = 0.0289m
Angular momentum = 0.0289m x ω = 0.0289mω
For conservation of rotational momentum, initial angular momentum must be equal to the final angular momentum
0.0054m = 0.0289mω
m cancels out, we have
0.0054 = 0.0289ω
ω = 0.187 rad/s
converting back to rpm, we have
N = 0.187/2π = 0.029 rotations per sec
0.029 x 360 = 10.44° per sec
The radius of a small ball is around 3.79747 cm. The radius of a basketball is about 3.16 times larger. What is the ratio of the surface areas of the small ball and a basketball? 2. What is the ratio of their volumes?
Explanation:
The ratio of the areas is the square of the ratio of the radii.
A/A = 3.16² = 9.99
The ratio of the volumes is the cube of the ratio of the radii.
V/V = 3.16³ = 31.6
Select the correct answer. Rita is a registered dietician. What does her work entail? A. prescribing medication for clients B. cooking healthy meals for students C. demonstrating how to use gym equipment D. making recommendations for healthy eating habits
Answer:
D
Explanation:
The answer is D because:
A) Only doctors are allowed to prescribe medications.
B) Rita is not a chef/cook.
C) Rita is not a personal trainer
D) The job of a dietican is to provide reccomendations to their clients in order for them to implement a healthy lifestyle via consuming what is best for them.
Hope this helps :)
Answer:
D.) Making recommendations for healthy eating habits
Explanation: PLATO :)))
Which two possible explanations does the video give for why white light changes into colored light? Color is an impurity added to white light by the prism. Color is present in the materials on which white light shines. White light contains seven colors, which are separated by the prism. White light reacts with chemicals in the air to produce seven colors.
Answer:
White light contains seven colors, which are separated by the prism.
White light reacts with chemicals in the air to produce seven colors.
Explanation:
It was first observed by Sir Issac Newton, that when white light is passed through a prism, an elongated, coloured patch of light is obtained on a screen placed behind the prism. The seven colours obtained constitute the spectrum of white light.
In nature, white light is separated into its constituent wavelengths when white light interacts with substances in the atmosphere.
Answer:
The correct answer is “color is an impurity added to white light by the prism.”
and
“White light contains seven colors, which are separated by the prism
Explanation:
i)Distinguish between different methods of charging. ii) You are provided with a positively charged gold leaf electroscope. State and explain what happens when a. a glass rod rubbed with silk is brought near the disc of electroscope. b. an ebonite rod rubbed with fur is brought near the disc of electroscope. c. an uncharged metal rod is brought near the disc of electroscope d. a glass rod rubbed with silk is rolled on the disc of electroscope.
Answer:
Explanation:
On rubbing a glass rod with silk, the electrons from the glass rod get transferred to the silk. The silk now has an excess of electrons and so is negatively-charged. On the other hand, the glass rod is deficient in electrons and hence is positively-charged.
In the above case, the silk undergoes negative electrification.
Now, when the positively charged glass rod is touched on the disc of a negatively charged gold leaf electroscope, the electrons shifts towards rod, hence amount of charge on gold leaves decreases and the divergence between the gold leaves decreases as unlike charges attract each other.
Hence, the divergence decreases when a glass rod rubbed with silk is brought near the disc of negatively charged electroscope.
hope it helps pls mark me as brainliest
What areas of the work force can science be applied to?
Select all that apply
government regulatlon
healthcare
a telemarketing
environmental engineering
banking
Answer:
All of the work of lifeExplanation:
In all works of life science can be applied, in-fact science has already been applied already, even in the humanities, social sciences and art related studies sciences is being applied,
Furthermore, the application of science and technology knows no boundaries, and as science is advancing day by day, expanding to new frontiers and breaking new limits so is it application to all works of life and relevance everyday.
A machine can never be 100% efficient because some work is always lost due to which factor? friction gravity static input force
Explanation:
Hi,
The answer is friction.
There is almost no machine which are not affected by friction. It losts some work due to friction while working.
Hope it helps..
Answer:
friction
Explanation:
the other options dont effect efficiency
Identifying Energy Transformations
What is one energy transformation that is taking place when a plant is growing?
radiant energy to thermal energy
thermal energy to nuclear energy
O chemical energy to thermal energy
O radiant energy to chemical energy
Answer:
My answer is radiant energy to chemical energy because it uses the sun which is a form of solar energy and then converts the food to chemical energy for the plant itself
Answer: Radiant energy to chemical energy
Explanation: Right on edge2021
A central air-conditioner uses 3500W of electricity. If electricity costs $0.087/kW*h. calculate how much it would cost to operate the air-conditioner 24 hours a day for 4 months (120 days).
Answer:
$876.96
Explanation:
The energy used is:
3500 W × (24 hr/day) × (120 day) × (1 kW / 1000 W) = 10,080 kWh.
So the cost is:
10,080 kWh × ($0.087 / kWh) = $876.96
an object is +2 m from the reference point. the object starts from rest it travels for 3 seconds and has a final position of -16 m. what is the acceleration of the object?
Answer:
Solution
Given:
initial velocity (u)=0m/s (because an object
starts from the rest)
time (t)=3sec
diatance travelled(s)=14m(16-2=14)
acceleration (a)=?
Now,
According to the formula
s=ut+1/2at^2
or,14 =0×3+1/2×a×3^2
or, 14=0+a/2×9
or, 14=9a/2
or, 9a=28
or, a=28/9
or, a=3.1 m/s^2
Therefore, the acceleration of the object is 3.1m/s^2 ans.
what's the difference between force of gravity and the earth's magnetic field?
Answer:
Gravitational fields are determined only by the mass ( or mass-energy) of a body. ... magnetic fields are produced by charged particles in motion, and depend on the charge and velocity of these particles, but not on their mass. Magnetic fields are 'polar' fields with a North and South polarity.
Explanation:
John owns a used 2003 mustang Mach 1, he spots a news crew with a bunch of people what should he do? A) Rev his engine at the highest RPM B) Do a burnout C) Drive near the Crowd and drop a gear and hurl into the crowd D) ALL OF THE ABOVE
Each of the three choices is tasteless, exhibitionist, juvenile, and dangerous. John should do none of them.
Encountering a news crew, there's no reason for John to call attention to himself in a childish way, or interfere with their work in any way.
What he should do is:
==> Slow down
==> Pass the scene cautiously
==> Resume his normal, legal speed quietly, in case the crew happens to be recording audio at the moment.
Mysteriously, this course of action is nowhere to be found among the choices listed.
Answer:
all three options :)
Explanation:
cuz merica
What is CGS unit of weight
Answer:
[tex] \boxed{dyne}[/tex]Explanation:
The weight of a body is defined as the force with which it is attracted towards the centre of a planet. A spring balance measures it. It's unit is Newton ( N ) in the SI system and dyne in the CGS system.
Hope I helped!
Best regards!
Weight is force.
The CGS unit of force is the dyne.
The SI unit of force is the Newton.
what is the function of eye lens of the human eye
Answer:
Lens of the human Eye is a important and one of that most complex sense organ.
Explanation:
Lens of the human eye it helps that in visualizing light and color perception and objects , glance on the human eye structure and function.
Sense organs are much pretty similar to the camera they help us see the objects clear.
A human eye is the 2.3 cm in diameter and all filled some fluid, and there are following parts in eye:- cornea, Retina , Lens ,Pupil , optic nerves.
cornea :- the cornea is the first transparent part of is called cornea, enters the light through the cornea.
Retina :-it is light sensitive layer that consists of nerve cells,then transmitted to the brain through nerves.
Lens:- behind the pupil there is a transparent structure called lens,it shape focus light on the retina.
Pupil:-it control the value of light that enters the human eye.
Optic nerves is are the two types :- (1) cones (2) Rods .
Answer:
It causes Light Rays to converge on the retina
Explanation:
I took the K12 Test
Hi please may someone help me especially on the sketch part.
An object falls from a hovering helicopter and hits the ground at a speed of 30 m/s. How long does it take the object to reach the ground and how far does it fall? Sketch a velocity-time graph for the object (ignore air resistance).
Ignoring the air resistance it will take about 3 seconds for the object to reach the ground.We know that the acceleration due to gravity is 10m/s2.
We also know that the final velocity is 30 m/s while the initial velocity is 0 m/s
we can use the formulae for acceleration to calculate the time taken/
(final - initial velocity)/timetaken=10
(30-0)/timetaken=10
timetaken =30/10=3 seconds
A stone is dropped from the same height at Terai and at the top of the
mountain. Where does it fall faster? Why?
Answer:
It will fall at the same speed in both locations
Explanation:
When an object is falling, it is accelerated to the same degree irrespective of the height from which it is falling.
All objects on the earth's surface experience an acceleration due to gravity. This acceleration due to gravity is the same for all objects irrespective of their height or mass.
Hence for a stone dropped from the same height as Terai and the top of a mountain, the acceleration due to gravity is the same in both cases hence they will fall at the same speed.
A gauge is reading the pressure at the bottom of a river, at a depth of 6 m. Would the reading be greater or smaller than the reading at the bottom of a lake at the same depth? You must provide a clear explanation for full credit.
Answer:
The pressure at the bottom of the river is less than that at the bottom of the lake.
Explanation:
From Bernoulli's equation, the pressure difference is given by
ΔP = ρgΔh + ρ(v₂² - v₁²)/2 where ρ = density of water, g = acceleration due to gravity, Δh = depth, v₁ = velocity at top, v₂ = velocity at bottom
For the lake, v₁ = v₂, since the velocity at the top and bottom are the same. So,
ΔP₁ = ρgΔh + ρ(v₁² - v₁²)/2 = ρgΔh + 0 = ρgΔh
P₂ - P₁ = ρgΔh
P₂ = P₁ + ρgΔh
For the river, v₁ < v₂, since the velocity at the top of the river is greater than at the bottom.
So,
ΔP₂ = ρgΔh + ρ(v₂² - v₁²)/2.
Since v₁ < v₂, ρ(v₂² - v₁²)/2 will be negative,
So,
ΔP₂ = ρgΔh - ρ(v₂² - v₁²)/2.
Since ρ(v₂² - v₁²)/2 is negative, making ΔP less than that in the lake.
So, ΔP₂ = ΔP₁ - ρ(v₂² - v₁²)/2.
ΔP₂ = P₃ - P₁
P₃ - P₁ = P₂ - P₁ - ρ(v₂² - v₁²)/2.
P₃ = P₂ - ρ(v₂² - v₁²)/2.
where P₃ = pressure at bottom of the river and P₂ = pressure at bottom of the lake and P₁ = atmospheric pressure at top of river and lake respectively.
Since the factor ρ(v₂² - v₁²)/2 is removed from the pressure at the bottom of the lake, the pressure at the bottom of the river is therefore less than that at the bottom of the lake.
The particles of a GAS within a closed container will collide with the container walls, exerting a FORCE. The force per unit of AREA is known as what?
Answer:
Pressure
Explanation:
One of the theories propounded by the Kinetic molecular theory, and which also provides an explanation of the several gas laws, is the statement that the gas molecules in a container, travel in straight lines and are in constant collision with themselves and the walls of the container, thus exerting force. This force is the pressure which is defined as the force per unit area.
There is no loss of energy in the collisions involving the gas molecules and that is why their movement can be described as elastic. The descriptions of the behavior of gas molecules in the Kinetic Molecular Theory, give rise to Charles law, Boyle's Law, Avogadro's Laws, Dalton's Law, and Amonton's Law.
Answer:
The pressure
Explanation:
Molecules of gases are constantly in motion, colliding with the walls of their container. This constant collision impacts force on the walls of the container, which depends on the speed with which the molecules are moving. The speed with which these molecules travel depends on the average kinetic energy of the molecules, which is proportional to the temperature.
This force when exerted per unit area is the pressure the gases exert on the walls of the container.
Question 2 of 10
Which of the following is an Sl unit?
A. Foot
B. Inch
C. Meter
D. Mile
SUBMIT
Answer:
C. Meter
Explanation:
The International System of Unit (SI) is gotten from the french word Systeme international is a modern form of metric measurement. It is the system of measurement that is universally accepted. It is from this SI units that all other system of units are derived. There are seven basic SI units which are:
1) Length in Meter (m)
2) Time in Seconds (s)
3) Amount of Substance in mole (m)
4) Electric current in ampere (A)
5) Temperature in kelvin (k)
6) Luminous intensity in candela (cd)
7) Mass in kilogram (kg)
(02.10 LC)
Which American sport stems from a combination of the British sports rugby and soccer?
Baseball
Basketball
Tennis
Football
Question 2 Multiple Choice Worth 5 points)
Answer:
football
Explanation:
I took the 2.10 quiz and got it wrong so it must be football
Solve for angles A-D
"For a first order instrument with a sensitivity of .4 mV/K and a time" constant of 25 ms, find the instrument’s response as a function of time for a sudden temperature increase from 273 K to 473 K. Before the temperature increase, the instrument output was a steady 109.2 mV. Plot the response y(t) as a function of time. What are the units for y(t)? Find the 90% rise time for y(t90) and the error fraction, Γ(t90).
Answer:
Explanation:
Given that:
For a first order instrument with a sensitivity of .4 mV/K
constant c = 25 ms = 25 × 10⁻³ s
The initial temperature [tex]T_1[/tex] = 273 K
The final temperature [tex]T_2[/tex] = 473 K
The initial volume = 0.4 mV/K × 273 K = 109.2 V
The final volume = 0.4 mV/K × 473 K = 189.2 V
the instrument’s response as a function of time for a sudden temperature increase can be computed as follows:
Let consider y to be the function of time i.e y(t).
So;
y(t) = 109.2 + (189.2 - 109.2)( 1 - [tex]\mathbf{e^{-t/c}}[/tex])mV
y(t) = (109.2 + 80 ( 1 - [tex]\mathbf{e^{t/25\times 10^{-3}}}[/tex])) mV
Plot the response y(t) as a function of time.
The plot of y(t) as a function of time can be seen in the diagram attached below.
What are the units for y(t)?
The unit for y(t) is mV.
Find the 90% rise time for y(t90) and the error fraction,
The 90% rise time for y(t90) is as follows:
Initially 90% of 189.2 mV = 0.9 × 189.2 mV
= 170.28 mV
170.28 mV = (109.2 + 80 ( 1 - [tex]\mathbf{e^{t/25\times 10^{-3}}}[/tex])) mV
170.28 mV - 109.2 mV = 80 ( 1 - [tex]\mathbf{e^{t/25\times 10^{-3}}}[/tex])) mV
61.08 mV = 80 ( 1 - [tex]\mathbf{e^{t/25\times 10^{-3}}}[/tex])) mV
0.7635 mV = ( 1 - [tex]\mathbf{e^{t/25\times 10^{-3}}}[/tex])) mV
t = 1.44 × 25 × 10⁻³ s
t = 0.036 s
t = 36 ms
The error fraction = [tex]\dfrac{189.2-170.28 }{189.2}[/tex]
The error fraction = 0.1
The error fraction = 10%
Match words at the left to the correct blanks in the sentences on the right. Not all words will be used.1. The energy that drives the expansion of a star into a subgiant or red giant comes from HYDROGEN SHELL FUSION2. Stars with mass greater than about 8 solar masses are considered HIGH-MASS STARS3. The final stage of core fusion in a low-mass star is HELIUM FUSION4. Stars that are fusing hydrogen in their cores are MAIN-SEQUENCE STARS5. When it dies, a high-mass star explodes as a SUPERNOVA6. A star that is expanding (into a subgiant and then a giant) has a(n) INERT HELIUM CORE7. When it dies, a low-mass star expels a PLANETARY NEBULA8. Stars with masses less than about two solar masses are considered LOW-MASS STARS
Answer:
In what way is iron unique among the elements?
It has the lowest mass per nuclear particle.
Match words at the left to the correct blanks in the sentences on the right. Not all words will be used.
-The energy that drives the expansion of a star into a subgiant or red giant comes from HYDROGEN SHELL FUSION
-Stars with mass greater than about 8 solar masses are considered HIGH-MASS STARS
-The final stage of core fusion in a low-mass star is HELIUM FUSION
-Stars that are fusing hydrogen in their cores are MAIN-SEQUENCE STARS
-When it dies, a high-mass star explodes as a SUPERNOVA
-A star that is expanding (into a subgiant and then a giant) has a(n) INERT HELIUM CORE
-When it dies, a low-mass star expels a PLANETARY NEBULA
-Stars with masses less than about two solar masses are considered LOW-MASS STARS