The solubilities of lead is different.
The lead compounds are more covalent in character, and also have a considerable high bond strength which means (aka lattice enthalpy).On the other hand lead compounds are insoluble, this energy is too high for hydration enthalpies (the energy released when water surrounds an ion of either charge).
Consider the position of Pb in the periodic table and the position of the Alkali Earth metals.
Alkali Earth Metals occupies noble-gas configuration when they are doubly charged cations.
Lead however is on the right hand side, and would like to have more electrons to get converted to get stable configuration; making the bonds in lead-compounds more covalent -as well as stronger- in nature.
The lattice enthalpies of insoluble compounds always have higher than the enthalpy of solvation.
Now, since Alkali Earth metals always like to be in ionic states; their compounds will dissolve in general more easily than the same compounds with lead, usually the lattice energy of lead compounds is much higher (In case of insoluble compounds higher than the energy that would be released upon solvation, which thus doesn't occur).
Thus, we can conclude with the fact of different solubilities.
Learn more about solubility of lead from the link given below.
https://brainly.com/question/29436848
#SPJ4
Give formulas corresponding to the following names: (a) Potassium tris(oxalato)chromate(lli) (b) Tris(ethylenediamine) cobalt(III) pentacyanoiodomanganate(Il) (c) Diamminediaquabromochloroaluminum nitrate
To solve the given problems, there are some rules for naming these compounds in coordination chemistry.
What is the nomenclature for naming coordination compounds?Cation is always named before anion.The amount of ligands of a certain type is a numerical prefix.We name the ligands in the complex ion before the metal ion, in alphabetically sequence.the oxidation state of metal ion is denoted by roman numerals in parenthesis For the anion complex, the metal name's ending is replaced with -ate.Molecular names are most frequently seen in neutral ligands, whereas anionic ligands remove the -ide & add -o to the root name.Some other rules for writing formula-
Cation and anion charges are balanced by one another.Outside of the brackets, we write the counterions.Now, as per the given questions we can write the formulas-
a) [tex]K_{3}[Cr(C_{2}O_{4})_{3}][/tex]
b) [tex][Co(en)_{3}]_{4} [Mn(CN)_{5}I]_{3}[/tex]
c) [tex][Al(H_{2}O) _{2}(NH_{3}) _{2}BrCl]NO_{3}[/tex]
Know more about coordination compounds at:
https://brainly.com/question/27289242
#SPJ1
Please helpp!!!!
1. Covering with greases on the iron makes _____________ .
1. stopping air and water from being in contact with the iron.
2. reacting with oxygen and/or water instead of iron
3. slipping the foreign materials
2. Which substance can react with copper to make copper carbonate?
3. What is the product of the combustion reaction of lithium.
4. In presenting the evidence in the table, the variable you change is written in the ___________.
1. left column
2. middle column
3. left row
4. right column
5.The iron corrosion, rusting, can be prevented by coating with __________, __________ and __________ .
6.In the chemical reaction, the substances you end up with are different from the ones you started with is called __________.
1. are not reversible
2. create new substances
3. compound
4. mixture
7. A ______________ is a chemical reaction that happens on the surface of a metal.
1. combustion reaction
2. corrosion reaction
3. metal reaction
4. acid reaction
8.In a chemical equation, the reactants and products are ____________ from each other.
1.different
2. the same
3. separated
4. obtained
9. As silver reacts with polluted air, a black compound, _____________ is formed.
1.silver carbonate
2. silver sulfide
3. silver oxide
4. silver alloy
1) Covering with greases on the iron stops air and water from being in contact with the iron.
2) The substance that can react with copper to make copper carbonate is silver carbonate
3) The combustion of lithium produces lithium oxide
4) The table is not shown hence the question can not be answered
5) another metal, oil and grease
6) The chemical reaction creates new substances.
7) A corrosion reaction is a chemical reaction that happens on the surface of a metal.
8) .In a chemical equation, the reactants and products are different from each other.
9) As silver reacts with polluted air, a black compound, silver oxide is formed.
What is oxidation?In the process of oxidation, we are just burning up a substance in oxygen. When we burn the substance in oxygen, there is an increase in the oxidation number of the object and oxygen is also added to the object. This is what we call oxidation of a substances.
Now we know that oxygen is abundant in the universe and thus it can be used in the burning of a substances. In effect we can look at the process of combustion as a situation in which we burn an object in air.
Learn more about oxidation:https://brainly.com/question/9496279
#SPJ1
sif5 lewis structure
The central silicon atom expands the octet because it is bonded with 9 electrons, and the Lewis structure of SiF₅ reveals that there are 5 single bonds and no double bonds in the compound.
Silicon Penta Fluoride: What is it?Fluoride in silicon pentoxide SiF₅ is a covalent compound created when silicon and fluorine share electrons. The 14th element, silicon, has four valence electrons. So, in order to reach octet, it needs 4 more electrons.
The 17th element, fluorine, has seven valence electrons. So, to reach an octet, one electron is required. Each F shares one of its valence electrons with silicon, giving silicon more electrons than an octet by receiving nine. Each of the five bonds is a single bond.
The charge on the main atom is created by the one extra pair of electrons. The compound thus does not follow the octet rule.
To know more about Lewis structure visit:
https://brainly.com/question/20300458
#SPJ1
Describe each of the following 5 properties of metals. Write at least 2 sentences about each. Please use proper grammar, spelling, and mechanics.
Electric conductivity
Heat conductivity
Ductility and malleability
Luster
High melting and boiling points
Metal conducts electricity when the delocalized electrons allow electrons to move from one side of the metal to another transferring the electric charge. Items like wood and rubber do not have delocalized electrons so electrical charges can not flow through them.
Metal conducts heat because when the delocalized electrons are heated they move faster. When the delocalized electrons move faster they move towards the colder end of the metal and transfer the heat throughout the metal object.
Metal can be ductile and malleable because of the sea of electrons. Because the electrons move freely, they move as the positive metal ions move, which keeps the metal stable.
Metal has luster because the sea of electrons absorbs and reflects light at the same frequency. This makes the metal look shiny.
Metals have high melting and boiling points because of the sea of electrons. The connection created by the positive and negative charges causes the metals to hold in place, giving metals a high melting and boiling points.
Five properties of metals are:
*Electric conductivity
*Heat conductivity
*Ductility and malleability
*Luster
*High melting and boiling points
Metal conducts electricity when the delocalized electrons allow electrons to move from one side of the metal to another transferring the electric charge. Items such as wood and rubber do not have delocalized electrons so electrical charges and that's why charge doesn't flow through them.
Metal conducts heat because when the delocalized electrons are heated they move faster. When the delocalized electrons move faster they move forward towards the colder end of the metal and transfer heat throughout the metal object.
Metal is ductile and malleable because of the ocean of electrons. Electrons move freely, they move as the positive metal ions move, which keeps metal stable.
Metal has luster because the ocean of electrons absorbs as well as reflects light at the same frequency. This makes the metal look shiny.
Metals acquire high melting and boiling points because of the ocean of electrons. The relation created by the positive and negative charges tends to the metals to hold in place, which gives metals high melting and boiling points.
Metals are opaque, lustrous elements that are accurate conductors of warmth and energy. maximum metals are malleable and ductile.
Learn more about metals here:-
https://brainly.com/question/25597694
#SPJ4
Tablets taken by patients suffering from anaemia contain 0. 2 g of iron sulphate (feso4). Calculate the mass of iron in each tablet to 2 decimal places.
Each iron tablet contains 152 g of iron.
The substance listed here is iron sulfate, and its chemical formula is FeSO4.
The compound's relative formula mass is calculated by multiplying the atomic masses of its constituent parts, and it is then given in grams.
The atomic mass of Fe = 55.845
The atomic mass of S = 32.065
The atomic mass of O = 15.994
So;
Relative formula mass is calculated as 55.845 + 32.065 + 4(15.994) = 151.886g
Therefore, the solution is 152g
A particle's or object's mass, a dimensionless quantity, is used to represent how much matter is there (symbolized m). The kilogram is the chosen unit of mass according to the International System (SI) (kg).
In physics, mass is a way to quantify inertia, a fundamental property of all matter.
To read more about mass, visit https://brainly.com/question/21178027
#SPJ4
which of the following is the cleanest burning fossil fuel? question 2 options: coal natural gas oil none of the above, all are equally dirty
Answer:
creo que es el gas natural
Which of the following is an alpha-keto acid/alpha-amino acid pair used in transamination? A) Pyruvate/leucineB) Oxaloacetate/aspartateC) Oxaloacetate/glutamateD) a-ketoglutarate/aspartateE) a-keto-b-hydroxybutyrate/phenylalanine
Answer is option B- Oxaloacetate/aspartate is an alpha-keto acid/alpha-amino acid pair used in transamination.
To create the amino acid version of the keto-acid and the keto-acid version of the original amino acid, amino groups are removed from amino acids and transferred to acceptor keto-acids by the process of transamination.
An amino group is transferred from one molecule to another during transamination. The formation of -ketoglutaric acid and aspartic acid from the interaction of glutamic acid and oxaloacetic acid serves as an example of this.
The reversible transfer of an amino group from glutamate to oxaloacetate, which results in the production of aspartate, is physiologically catalyzed by the enzyme AST. The enzyme was therefore previously known as serum glutamic-oxaloacetic transaminase.
Hence, Oxaloacetate/aspartate is an alpha-keto acid/alpha-amino acid pair used in transamination.
To learn more about transamination refer-https://brainly.com/question/24109536
#SPJ4
what is an acidic oxide
Explanation: An acidic oxide is an oxide that either produces an acidic solution upon addition to water, or acts as an acceptor of hydroxide ions effectively functioning as a Lewis acid. Examples include SO2, CO2, SO3, Cl2O7, P2O5, and N2O5.
Answer:
An acidic oxide is an oxide that either produces an acidic solution upon addition to water, or acts as an acceptor of hydroxide ions effectively functioning as a Lewis acid.[1] Acidic oxides will typically have a low pKa and may be inorganic or organic.
the malate dehydrogenase reaction has a strongly positive standard free energy change but it proceeds in the direction of oxaloacetate because the concentration of is maintained at exceedingly low levels.
Oxaloacetate concentration is maintained at exceedingly low levels.
What is a malate dehydrogenase?
Malate dehydrogenase (MDH) is a key protein in the main oxidative pathway and is a widely distributed enzyme in living things. Using NAD+ and NADP+ as a cofactor, it catalyses the conversion between malate as well as oxaloacetate. Malate dehydrogenase (MDH), a crucial enzyme inside the tricarboxylic acid cycle (TCA), performs crucial metabolic functions in the pathways that produce aerobic energy as well as in the malate shuttle.
The malate dehydrogenase reaction seems to have a strongly positive gibbs free energy change, but also because the density of oxaloacetate is kept at extremely low levels, it proceeds inside the direction of oxaloacetate.
To learn more about malate dehydrogenase the link is given below:
https://brainly.com/question/16751866
#SPJ4
Which of the following is
the BEST reason to reduce
pollution rather than trying
to clean polluted waters?
A. cleaning polluted waters is difficult
and expensive
B. reducing pollution is easy
C. reducing pollution is cheap
D. cleaning polluted waters is very
cheap
Cleaning polluted waters is difficult and expensive.
What is water pollution?
Water contamination occurs when pollutants contaminate water source and render the water unfit for use in drinking, cooking, cleaning, swimming, and other activities. Germs, dust,and parasites are examples of pollutants.
Why is cleaning polluted water difficult?
Reversing the impacts of water contamination is exceedingly challenging. Even with costly technology, it can take years to completely purify the water because natural processes can take years, decades, or even centuries. Even though water is polluted, there are some ways to reduce pollution. They are
Dispose of dangerous household goods properlyReduce or stop using chemical pesticides, herbicides, and fertilizersSet up a time to get your septic system serviced.Use native plants in your landscaping.Fix any barren areas in your yard.Creating a rain gardenHence, option A is correct.
To know more about water pollution, visit:
https://brainly.com/question/19920929
#SPJ1
1. SiH4 what is the covalent compounds
Answer: Silicon tetrahydride (silane) is a covalent compound where a central silicon (Si) atom is covalently bonded to 4 terminal hydrogen (H) atoms.
Explanation:
if an element has an atomic number of 15 then what is it?
gold has a face-centered cubic unit cell. how many atoms of au are present in each unit cell? express your answer as an integer.
There are 3 Au atoms are present in each unit cell.
The crystal structure of gold is face-centered cubic. Its unit cell or basic repeating unit, contains four gold atoms, indicating that the gold atoms are in contact along the diagonal. The crystal structure of gold is a close-packed face-centered cube Imagine a cube with a gold atom at each corner and at the center of each face.
Gold is a chemical element with 79 protons in each nucleus. All atoms with 79 protons are gold atoms, and all gold atoms behave similarly chemically. So, in principle, you only need 79 protons to make gold. A face-centered cubic unit cell also starts with identical particles at the eight corners of the cube.
Learn more about Au atoms here:- https://brainly.com/question/25953283
#SPJ4
Which pair of elements will form a covalent bond?hydrogen and chlorinesodium and chlorinecopper and brominezinc and bromine.
Chlorine and hydrogen will form covalent bond.
What is covalent bond?
An electron exchange that results in the formation of electron pairs between atoms is known as a covalent bond. Bonding pairs or shared pairs are the names given to these electron pairs. Covalent bonding is the stable equilibrium of the attractive forces between atoms when they share electrons. Each atom in many molecules can reach the equivalent of a complete valence shell thanks to the sharing of electrons, which results in a stable electronic configuration. Covalent bonds are much more frequent than ionic bonds in organic chemistry. Numerous other types of interactions fall under the category of covalent bonding, such as bent bonds, three-center two-electron bonds, agostic interactions, metal-to-metal bonds, and three-center four-electron bonds.
Chlorine and hydrogen Non-metals can connect covalently with one another.
learn more about covalent bond
https://brainly.com/question/3447218
#SPJ4
Cl is part of the element family Halogens, which are also known as salt formers. How
many valence electrons does Na have when forming an ionic bond with CI? As you
remember, valence electrons are the ones in the outermost shell.
a) 8
b) 1
c) 2
d) 4
Na has 8 valence electrons when forming an ionic bond with Cl, option A.
What is the valency of sodium chloride?Chlorine (Cl) has seven valence electrons and Sodium (Na) has one. To form an octet, sodium must give up one electron and chlorine must gain one. Therefore, both sodium and chlorine ions have eight valence electrons and their outermost energy levels become completely depleted.
Bonds hold the negative and positive ions together. As a result, sodium chloride is formed (table salt). Also, to find valence electrons, a periodic table column can be used to determine an element's main group number.
Learn more on valency here: https://brainly.com/question/371590
#SPJ1
Draw the Lewis structure of HCN.HCN. Include lone pairs.
Draw the Lewis structure of CO2−3.CO32−. Include lone pairs. Formal charges are optional.
The Lewis structures of HCN and the carbonate ion are shown in the images attached.
What is the Lewis structure?We know that the term Lewis structure has to do with the representation of the compound in which we have the symbol that depicts each and every one of the elements in the compound and then we have the electrons that are found in the central atom shown as dots.
In this case, we have been asked to show the Lewis structures of the hydrogen cyanide and the carbonate ion and these can be seen in the images that have been attached to this answer here.
Learn more about Lewis structure:https://brainly.com/question/20300458
#SPJ1
A 170. 00 g sample of an unidentified compound contains 29. 84 g sodium, 67. 49 g chromium, and 72. 67 g oxygen. Find the empirical formula.
The empirical formula is [tex]N_{a2C_{r2} } O_{7}[/tex].
Solution:
Mass of Na = 29.84 g
Mass of Cr = 67.49 g
Mass of O = 72.67 g
For Na = [tex]\frac{1.297}{1.297}[/tex] = 1
For Cr = [tex]\frac{1.297}{1.297}[/tex] = 1
For O = [tex]\frac{4.542}{1.297}[/tex] = 3.5
The ratio of Na: Cr: O = 1: 1: 3.5
To make the ratio in a whole number we are multiplying the ratio by 2, and we get:
The ratio of Na: Cr: O = 2: 2: 7
Taking the mole ratio as their subscripts.
The empirical formula for the given compound is[tex]N_{a2C_{r2} } O_{7}[/tex].
The empirical formula is the chemical formula of a compound and gives the proportion of elements present in the compound, but not the actual number or arrangement of atoms. This will be the smallest integer ratio of the elements in the compound. Derivation of the number of moles from the mass of each element. Divide the molar amount of each element by the minimum molar amount to get the exponent of the preliminary empirical formula.
Learn more about The empirical formula here:- https://brainly.com/question/1603500
#SPJ4
Effective segmentation identifies where your customers are in the (fill the blank), and assists your customers in taking the appropriate next step in their (fill the blank).
Effective segmentation identifies where your customers are in the buyer’s journey and assists your customers in taking the appropriate next step in their individual customer journey.
Understanding the different audiences permits you to tailor your messaging and direct your marketing efforts as it should be. target audience segmentation lets you better talk and connect to your clients, allowing you to get the proper message approximately the right product to the right human beings on the proper time.
Demographic, psychographic, behavioral and geographic segmentation are considered the four fundamental varieties of marketplace segmentation, however there also are many other strategies you may use, along with numerous versions at the 4 important kinds.
Learn more about Effective segmentation here:-https://brainly.com/question/28046741
#SPJ4
What are the products of the acid hydrolysis of an ester?
The products of the acid hydrolysis of ester are carboxylic acid and alcohol.
Acid hydrolysis of estersAcid hydrolysis of esters involves heating esters in a large excess of water in the presence of a strong acid catalyst. The products of such reactions are carboxylic acid and alcohol as shown in the below example.
[tex]CH_3COO(CH_2)_3CH_3 + H_2O --- > C_4H_9OH + CH_3CO_2H[/tex]
Acid hydrolysis of esters is the reverse of the esterification process. During ester formation or esterification, carboxylic acids and alcohols react to produce ester and water as follows:
[tex]C_4H_9OH + CH_3CO_2H-- > CH_3COO(CH_2)_3CH_3 + H_2O[/tex]
Thus, acid hydrolysis of esters is a reversible reaction that does not go into completion ordinarily.
More on esters can be found here: https://brainly.com/question/9459983
#SPJ1
summer is when we are facing the sun and winter is when we are facing away from the sun
Summer is when we are facing the sun and winter is when we are facing away from the sun which is referred to as a true statement.
What is Summer?This is referred to as the time of the year when the sun is hot and it is known as the hottest of the four temperate seasons. This usually occurs after spring and before autumn and the temperature is usually high when compared to other seasons.
Winter on the other hand is referred to as the coldest season of the year and it usually occurs between autumn and spring.
Summer therefore occurs when we are facing the sun while winter occurs when we are facing away from the sun which explains the little amount of sunlight experienced in such location and is therefore the reason why true was chosen as the correct choice.
Read more about Summer here https://brainly.com/question/20763159
#SPJ1
The full question is :
summer is when we are facing the sun and winter is when we are facing away from the sun true/false
a rectangular garden measures 34ft by 45ft. surrounding (and bordering) the garden is a path 4ft wide. find the area of this path. be sure to include the correct unit in your answer.
Area is defined as the total space taken up by a flat (2-D) surface or shape of an object.
What is this rectangular?A quadrilateral with four equal vertices and parallel sides is known as a rectangle. As a result, it is also known as an equiangular quadrilateral. Rectangles can also be referred to as parallelograms because their opposing sides are equal and parallel. A laptop has four sides, two of which are parallel to one another and are of equal length. This means that a laptop is a well-known example of a rectangle-shaped object in everyday life. The shape of a keyboard and a monitor's screen is also rectangular. A quadrilateral with all of its angles being equal, or right angles, is a rectangle.Area = length x breadthArea = l × b. Area = π × radius × radiusArea = π × r2(π = 3.14) Using these formulas, area for different quadrilaterals
A = L x W where A equals area, L equals length, and W equals width.
area of yard = 34 x 45 = 1530 square feet
walk is 4 feet wide
34-4 =30, 45-4 = 41
30*41=1230
1530-1230=300
area of walk is 300 square feet
To learn more about rectangular and area refer to:
https://brainly.com/question/4525479
#SPJ4
now rank the substances from part 1 in order of expected melting point, based on the relative strengths of the interparticle attractions.
In the given query, [tex]\rm CaCl_2 > NH_2OH > KI > PCl_3 > Cl_2 > CH_4[/tex] are the compounds in order of projected melting point from highest to lowest.
The melting point of a substance is determined by the strength of the interparticle attractions between the molecules or ions in the solid. The stronger the interparticle attractions, the higher the melting point.
[tex]\rm CaCl_2[/tex] has the highest expected melting point because it is an ionic compound with strong electrostatic attractions between the [tex]\rm Ca^{2+}\ and\ Cl^-[/tex]ions.
[tex]\rm NH_2OH[/tex] has the second-highest expected melting point because it has strong hydrogen bonding between the [tex]\rm NH_2OH[/tex] molecules.
KI has the third-highest expected melting point because it is an ionic compound with weaker electrostatic attractions than [tex]\rm CaCl_2[/tex].
[tex]\rm PCl_3[/tex] has the fourth-highest expected melting point because it has dipole-dipole interactions between the [tex]\rm PCl_3[/tex] molecules.
[tex]\rm Cl_2[/tex] has the fifth-highest expected melting point because it is a nonpolar molecule with weak London dispersion forces between the [tex]\rm Cl_2[/tex]molecules.
[tex]\rm CH_4[/tex] has the lowest expected melting point because it is a nonpolar molecule with weak London dispersion forces between the [tex]\rm CH_4[/tex] molecules.
Therefore, the substances in order of expected melting point from highest to lowest are: [tex]\rm CaCl_2 > NH_2OH > KI > PCl_3 > Cl_2 > CH_4[/tex]
Learn more about melting point here:
https://brainly.com/question/20551307
#SPJ12
The given question is incomplete. The complete question is:
Now rank the substances in order of expected melting point, based on the relative strengths of the interparticle attractions: [tex]\rm CH_4[/tex], KI, [tex]\rm Cl_2[/tex], [tex]\rm PCl_3[/tex], [tex]\rm CaCl_2[/tex], [tex]\rm NH_2OH[/tex].
[tex]\mathrm{Cr}[/tex] is a member of which family?
noble gases
halogens
alkaline earth metals
alkali metals
transition metals
Answer:
transition metals
Explanation:
It is shown in the periodic table. It has an atomic number of 24 and exhibits characters which makes it to be a transition element.
The ideal gas law displays the relationship in which of the following? Select all that apply. Select all that apply: A.Amontons's law B.Charles's law C.Boyle's law D.Avogadro's law
Amontons's law, Charles's law, Boyle's law and Avogadro's law are applied in ideal gas equation.
According to Boyle's Law, gas volume grows as pressure lowers. According to Charles' Law, a gas expands in volume as its temperature rises. Additionally, Avogadro's Law states that as gas concentration rises, so does its volume. The macroscopic characteristics of ideal gases are related by the ideal gas law (PV = nRT). A gas is considered to be ideal if its particles neither attract nor repel one another and occupy any space (have no volume).
Hence, ideal gas equation summation of individual gas laws.
To know more about Boyle's law
https://brainly.com/question/1437490
#SPJ4
The primary ingredient of most shampoos is:
Answer: Water
Explanation: Water is the main ingredient in most shampoos. The second ingredient that most shampoos have in common is the primary surfactant (or base detergent). Surfactants are cleansing or surface active agents.
A certain brand of canned soup contains 2.26g NaCl in a single-cup serving. what is the molarity of NaCl in the soup? (Note: 4 c = 0.946 L.)
The molarity of the solution is 0.0597 M.
What is the molarity?We know that the molarity has to do with the number of moles of the substances that is found in a given volume of solution. Thus the term molarity has to do with the amount of substance that is present.
We have that;
Mass of the sodium chloride = 2.26g
Molar mass of the sodium chloride = 40 g/mol
Volume of the solution = 0.946 L
Number of moles = 2.26g/ 40 g/mol
= 0.0565 moles
Molarity = 0.0565 moles/0.946 L
= 0.0597 M
Learn more about molarity:https://brainly.com/question/8732513
#SPJ1
Design a concept map that compares and contrasts the atomic ideas proposed by Democritus and John Dalton.
The atomic theories of Dalton and Democritus does converge in a common idea of the indivisibility of the atom.
What is the atomic theory?We know that the atomic theory is the description of the atom from diverse perspectives. Actually, we begin the idea of the atomic theory from the would of Democritus. In the time of Democritus, there were no empirica laboratories hence, he had to make do with the theoretical approaches to the idea of the atom. He put forward the idea of the indivisibility of the atom.
This idea of the indivisibility of the atom became a resonating theme in the study of the atom from the time of Democritus down to the time of John Dalton. According to the Dalton Atomic theory, the atom is indivisible and the atoms of an element can be able to combine with the atoms of other elements in small simple ratios.
Learn more about atomic theory:https://brainly.com/question/28853813
#SPJ1
when considering solutions of liquids in liquids, polar liquids are generally miscible with .
When considering solutions of liquids in liquids, polar liquids are generally miscible with water.
solution, in chemistry ,means a homogenous mixture of two or more substances in relative amounts that can be varied continuously up to what is called the limit of the solubility. The term solution is commonly applied to the liquid state of matter, but solutions of gases and solids are possible.
If the molecular compound is a liquid two things can happen when it comes into contact with water: it can either mix with the water or it can separate from the water. When two liquids mix they are said to be "miscible". When two liquids not not mix or if they separate they are said to be "immiscible". The answer is similar to the one for solids above: If the liquid molecules are polar like methanol rubbing alcohol, then it will be miscible with water. If the liquid molecules are nonpolar like oil, then the liquid will be immiscible with water.
To know more about solutions
https://brainly.com/question/1616939
#SPJ4
A rectangular swimming pool is 8 ft deep. One side of the pool is 4,5 times longer than the other. The amount of water needed to fill the swimming pool is 5184 cubic feet. Find the dimensions of the pool
The smaller dimension of the pool is ft and the larger dimension is tt
The dimension of the pool is Width = 13.5 ft , depth = 8 ft , length = 60.75 ft .
The volume expression is given as :
V = L × W × D
where ,
L = length = 4.5 times Width
W = width = ?
D = depth = 8 ft
V = volume = 5184
5184 = 6 × W × 4.5W
5184 = 27 W²
W² = 5184 / 27
W² = 192
W = 13.8 ft
therefore, A rectangular swimming pool is 8 ft deep. One side of the pool is 4,5 times longer than the other. The amount of water needed to fill the swimming pool is 5184 cubic feet the dimensions are Width = 13.5 ft , depth = 8 ft, length = 60.75 ft.
To learn more about dimensions here
https://brainly.com/question/22152168
#SPJ4
A trend relating the melting point of a transition metal in Periods 4 and 5 to the number of electrons each atom has? Explain
The melting point of transition elements increases up to d 5 and then drops over time as the atomic number rises.
What is transition element ?
Transitional elements are those that have their d orbitals only partially filled. According to IUPAC, a transition element is an element with a partially full d subshell of electrons or an element with a partially filled d orbital that can form stable cations.
As was previously discovered, the higher the metal's melting temperature, the more delocalized electrons there are and the smaller the atom's radius. The number of delocalized electrons per metal atom rises as we cross period 3, and the radius of the elements decreases. This implies that the melting point rises.
Thus,The melting point of transition elements increases up to d 5 and then drops over time as the atomic number rises.
To, learn more about transition element, follow the link;
https://brainly.com/question/1948991
#SPJ1
