ASAP!! Please help me out here ​

Answer:

The force exerted by the earth on a body is called gravitational of a body.

i think this is the answer

Answer:weight

Explanation:

applied force is a contact force

Explanation:

Wave front, imaginary surface representing corresponding points of a wave that vibrate in unison. ... Wave fronts for longitudinal and transverse waves may be surfaces of any configuration depending on the source, the medium, and the obstructions encountered.

Answer:

A stone is more dense than water and the air in draft of the boat is less dense than water.

Answer:

The atomic number of phosphorus is 15.

Explanation:

It’s found after Si(Silicon) and before S(sulphur)

Answer:

The heat gives atoms/ particles in balloon more kinetic energy so they move further apart, increasing size and eventually popping balloon

^ very simple explanation

Explanation:

Answer:

when it comes to machines being Rusty oil is like the root loosener

Answer:

Parallel

Explanation:

The work done is defined as the force applied on an object and the displacement in the position of the object in the direction of force.

W = F s cos A

where, F is the force, s is the displacement and A is the angle between force and displacement.

When the angle between the force and the displacement is 90 degree, the work done is zero.

To get the maximum work the angle between the force and the displacement is 0 degree.

So, to get the work done by the force the angle between the force and displacement is 0 degree that means the force and displacement is parallel to each other.

Answer:

magnetic force:

i) It is exerted by a magnet.

ii)Magnetic forces are always normal to the direction of the velocity of the charge it acts upon.

Electrostatic force

i) It is exerted by electrically charged body.

ii)Electric force are independent of the direction the charge moves in.

✌✌✌✌

Answer:

d. was formed by the collision of the Earth with a Mars-sized protoplanet.

According to the The giant-impact hypothesis the Moon was formed from the debris of a collision between the Earth and a Mars-sized protoplanet.

Answer:

No, it's not there.

Explanation:

For a machine to be 100% efficient, it has to be with an output which is equal to its input. But machines have an out put less than an input, hence efficiency below 100%.

Answer:

......... ........ ... .... .... . .. .......

.....

Explanation:

........mmmmmmmmmmm

Answer:

Uniform motion is a type of motion that is characterized as the motion of an object wherein the object moves in a straight line and its velocity remains unchanged along that line, regardless of the duration of time, as it occupies equal distances at equal time interval and Non-uniform motion is described as the motion of an object wherein the object moves at different speeds and does not cover the same distance at equal time intervals, regardless of the duration of the time interval.

Answer:

hope it's help you

Explanation:

In Uniform motion, the movement of a body is along the straight line with constant speed. In non uniform motion, the movement of a body is along the straight line with variable speed. In uniform motion, the body covers equal distance in an equal interval of time.

The average acceleration of the bike is 2.2 m/s²

Acceleration, rate at which velocity changes with time, in terms of both speed and direction.

A point or an object moving in a straight line is accelerated if it speeds up or slows down.

According to the question,

Given, initial velocity, u=3.0m/s and final velocity v=8.5 m/s

Time = 2.5 seconds

If a be the acceleration.

a = [tex]\frac{v-u}{t}[/tex]

a = [tex]\frac{8.5 - 3.0}{2.5s}[/tex]

⟹ a=2.2 m/s²

So, The average acceleration of the bike is 2.2 m/s²

Learn more about average acceleration here:

https://brainly.com/question/2303856

#SPJ2

Answer:

A

The upthrust on a floating body is in upwards direction and is equal to the weight of the liquid displaced

B

The upthrust is directly proportional to the density of the liquid in which the solid is immersed

C

The upthrust is directly proportional to the volume of the fluid displaced by a solid

The upthrust acts on the body in upward direction at the center of buoyancy.

Upthrust is equal to the weight of liquid displaced by object and weight of liquid will depend on its density.

Upthrust is F=Vρg ,where V is the volume of liquid displaced and ρ is the density of fluid.

The total lateral pressure acting on an immersed object on one side is equal and in opposite direction to the total lateral pressure acting on the other side.

Answer:

3012.012m

Explanation:

s=it +1/2(10.8)(16.7)^2

Answer:

The final translational seed at the bottom of the ramp is approximately 4.84 m/s

Explanation:

The given parameters are;

The radius of the sphere, R = 2.50 cm

The mass of the sphere, m = 4.75 kg

The translational speed at the top of the inclined plane, v = 3.00 m/s

The length of the inclined plane, l = 2.75 m

The angle at which the plane is tilted, θ = 22.0°

We have;

[tex]K_i[/tex] + [tex]U_i[/tex] = [tex]K_f[/tex] + [tex]U_f[/tex]

K = (1/2)×m×v²×(1 + I/(m·r²))

I = (2/5)·m·r²

K =  (1/2)×m×v²×(1 + 2/5) = 7/10 × m×v²

U = m·g·h

h = l×sin(θ)

h = 2.75×sin(22.0°)

∴ 7/10×4.75×3.00² + 4.75×9.81×2.75×sin(22.0°) = 7/10 × 4.75×[tex]v_f[/tex]² + 0

7/10×4.75×3.00² + 4.75×9.81×2.75×sin(22.0°) ≈ 77.93

∴ 77.93 ≈ 7/10 × 4.75×[tex]v_f[/tex]²

[tex]v_f[/tex]² = 77.93/(7/10 × 4.75)

[tex]v_f[/tex] ≈ √(77.93/(7/10 × 4.75)) ≈ 4.84

The final translational seed at the bottom of the ramp, [tex]v_f[/tex] ≈ 4.84 m/s.

Answer:

A. Contains DNA

C. Contains ribosomes

F. Lacks a nucleus

Explanation:

(a) The recoil or backward velocity of the gun is 8 m/s.

(b) The bullet cannot penetrate the plank of the wood completely.

The given parameters include;

(a) The backward or recoil velocity of the gun is calculated by applying the principle of conservation of linear momentum.

m₁u₁  + m₂u₂ = 0

m₂u₂ = -m₁u₁

[tex]u_2 = -\frac{m_1u_1}{m_2} \\\\u_2 = - \frac{0.1 \times 400}{5} \\\\u_2 = -8 \ m/s[/tex]

Thus, the recoil or backward velocity of the gun is 8 m/s.

(b) determine if the bullet can penetrate the plank of the wood completely

the acceleration of the bullet is calculated as;

v² = u₁² + 2as

2as = v² - u²

[tex]a = \frac{v^2 -u_1^2}{2s} \\\\a = \frac{(266.67)^2 -(400)^2}{2\times 0.04} = -1.111 \times 10^6 \ m/s^2[/tex]

Finally, determine the distance traveled by the bullet when it comes to a complete stop, that is the final velocity = 0

[tex]v_f^2 = v^2 + 2ad\\\\2ad = v_f^2 - v^2\\\\d = \frac{v_f^2 - v^2}{2a} \\\\d = \frac{(0) - (266.67)^2}{2(-1.111\times 10^6)} \\\\d = 0.032 \ m[/tex]

d = 3.2 cm

The total distance traveled by the bullet inside the plank = 4 cm + 3.2 cm = 7.2 cm

Therefore, the bullet cannot penetrate the plank completely.

To learn more about linear momentum visit: https://brainly.com/question/15869303

Answer:

1845.26 ?

Explanation:

18.46 × 99.96= 1845.2616 = 1845.26

im not entirely sure though

Answer:

Explanation:

(a) It is given that Joseph jogs on a straight road of 300m in a time interval of 2 minutes and 30 seconds, which is equal to 150seconds. Therefore, when Joseph jogs from point A to point B, he covers a distance of 300m in time of 150seconds. Hence, his average speed is 300m/150s=2ms^−1. Since it is a straight road and he jogs in a single direction in this case, his displacement is equal to 300m. Since it is a straight road and he jogs in a single direction in this case, his displacement is equal to 300m.

Hence, his average velocity is 300m/150s=2ms^−1

(b) Then it is given that he turns back and points B and jogs on the same road but in the opposite direction for a time interval for 1 minute and covers a distance of 100m.If we consider the whole motion of Joseph, i.e. from point A to point C, then he covers a total distance of 300m+100m=400m. And he covers this total distance in a time interval of 2.5min+1min=3.5min=210s.

Therefore, his average speed for this journey is 400m210s=1.9ms−1.

For the same journey is displacement is equal to the distance between the points A and C,i.e. 300m−100m=200m.

Hence, his average velocity for this case is 200m/210s=0.95ms^−1

Answer:

14 years

Explanation:

because the light will take four years to reach the earth. And the star is four light years away from the earth.

An imaginary star is four light years from earth. The star has a planet, upon which a large mirror has been installed. The mirror faces earth. A ten year old boy aims his telescope at the mirror,then the boy would be 14 years old when he will see his own reflection.

It can be defined as the distance travelled by the light in one year .it is represented in units of distance such as miles or km.

1 light year is calculated by multiplying the speed of light with the time of one year

1 light year = speed of light × one year time period

1 light year = 3×10⁸ ×(365×24×60×60)

                  =9.461× 10¹⁵ meter

As given in the problem 10 year old boy aims his telescope at the mirror which is 4 light years away then the light has to travel four years to reach the boy ,then the boy would be 14 year old when he would see his own reflection.
Learn more about light year from here

https://brainly.com/question/1302132
#SPJ2

Answer:

hi

Explanation:

pls mark as a BRAINLIST

Answer:

Wait until the end of the semester to complete all work.

Explanation:

this is the obvious answer.

please mark me brainliest

Answer:

Wait until the end of the semester to complete all work

Answer:

The separation between the two stones is 36 m, when the second stone is approximately 10.9 m below the top of the cliff

Explanation:

The given parameters are;

The height of the cliff from which the stones are dropped, h = 60 m

The time at which the second stone is dropped = 1.6 seconds after the first

The distance below the top of the cliff when the distance between the two stones is 36 m = Required

We have;

The kinematic equation of motion that can be used is s = u·t - (1/2)·g·t²

For the first stone, we have, s₁ = u·t₁ - (1/2)·g·t₁²

For the second stone, we get; s₂ = u·t₂ - (1/2)·g·t₂²

t₁ = t₂ + 1.6

g = The acceleration due to gravity ≈ 9.81 m/s²

s = The distance below the cliff top

The initial velocity of the stones, u = 0

Let t represent the time from which the second stone is dropped at which the distance between the two stones is 36 m, we have;

s₁ = u·(t + 1.6) + (1/2)·g·(t + 1.6)²

s₂ = u·t + (1/2)·g·t²

u = 0

∴ s₁ - s₂ = 36 =  (1/2)·g·(t + 1.6)² - (1/2)·g·t²

2 × 36/(g) = (t + 1.6)² - t²  = t² + 3.2·t + 2.56 - t² = 3.2·t + 2.56

2 × 36/(9.81) = 3.2·t + 2.56

t = (2 × 36/(9.81) - 2.56)/3.2 =  ≈ 1.49 s

t ≈ 1.49 s

s₂ = (1/2)·g·t²

∴ s₂ = (1/2) × 9.81 × 1.49² ≈ 10.9

The distance below the top of the cliff of the second stone when the the separation between the two stones is 36 m, s₂ ≈ 10.9 m.

Explanation:

string roller is called an example of wheel and axel because The thin rod which needs to be turned is called the axle and the wider object fixed to the axle, on which we apply force is called the wheel.

hence the we apply force on the roller and the string gets tight.

Answer:

Pascal is a derived unit because it cannot be expressed in any physics terms, but it is an expression of fundamental quantities.

Explanation:

[tex]{ \sf{Pasacal \: ( Pa) = \frac{newtons}{metres {}^{2} } }} \\ \\ { \sf{Pasacal \: (Pa) = \frac{kg \times {ms}^{ - 2} }{ {m}^{2} } }}[/tex]