Answer:
Red: 17.24%
Yellow: 32.76%
Green: 50%
Explanation:
Which equation represents the correct net ionic equation for the reaction between Ca(OH)2 and H2SO4?
Upper H superscript plus, plus upper O upper H superscript minus right arrow upper H subscript 2 upper O.
2 upper H superscript plus, plus 2 upper O upper H superscript minus right arrow upper H subscript 2 upper O.
Upper C a superscript 2 plus, plus 2 upper O upper H superscript minus, plus upper S upper O subscript 4 superscript 2 minus right arrow upper C a superscript 2 plus, plus upper S upper O subscript 4 superscript 2 minus, plus 2 upper H subscript 2 upper O.
Upper C a (upper O upper H) subscript 2 plus upper H subscript 2 upper S upper O subscript 4 right arrow upper C a upper S upper O subscript 4 plus 2 upper H subscript 2 upper O.
Answer: The correct net ionic equation for the reaction is [tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]
Explanation:
Net ionic equation is defined as the equations in which spectator ions are not included.
Spectator ions are the ones that are present equally on the reactant and product sides. They do not participate in the reaction.
The balanced molecular equation is:
[tex]Ca(OH)_2(aq)+H_2SO_4(aq)\rightarrow CaSO_4(aq)+2H_2O(l)[/tex]
The complete ionic equation follows:
[tex]Ca^{2+}(aq)+2OH^-(aq)+2H^+(aq)+SO_4^{2-}(aq)\rightarrow 2Ca^{2+}(aq)+SO_4^{2-}(aq)+H_2O(l)[/tex]
As calcium and sulfate ions are present on both sides of the reaction. Thus, they are considered spectator ions.
The net ionic equation follows:
[tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]
Hence, the correct net ionic equation for the reaction is [tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]
Answer:
B. no reaction
Explanation:
how does evelyn hear music?
A carbon atom that is surrounded by four hydrogen atoms has a _____ molecular geometry. This geometry results from the arrangement of the _____ hybrid orbitals around the carbon atom. They are formed when the s-orbital and ______ -orbitals mix, or hybridize.
Answer:
Tetrahedral, sp3, p
Explanation:
C has 4 bonds and hence its tetrahedral shape with 109.5 degrees. since there are 4 bonds, it is sp3
Answer:
A carbon atom that is surrounded by four hydrogen atoms has a
✔ tetrahedral
molecular geometry.
This geometry results from the arrangement of the
✔ four sp3
hybrid orbitals around the carbon atom.
They are formed when the s-orbital and
✔ three p
-orbitals mix, or hybridize.
Explanation:
What is Geothermal Energy?
Answer:
Geothermal energy is basically the thermal energy generated and stored in the Earth. It is the energy that determines the temperature of matter.
Explanation:
I hope this helped :)
Answer:
Geothermal energy is heat that's inside of the ground. It is a renewable energy source because heat is constantly being produced inside of the earth.
Explanation: Hope this helps! :)
Which of the following correctly ranks the following bonds in order from most to least polar?
C-H, N-H, O-H, F-H
a)
O-H > F-H > N-H > C-H
b)
F-H > N-H > O-H > C-H
c)
C-H > N-H > O-H > F-H
d)
F-H > O-H > N-H > C-H
Answer:
O-H F-H N-Hy
Explanation:
C-H N-H O-H F-H
copper +sulfur + oxygen =
what is the slope of the line segment
-3
-1/3
1/3
3
Answer:
slope = 3
Explanation:
[tex]slope = \frac{3 - 0}{1 - 0} \\ = 3[/tex]
7. A sample of methane gas (CH.) with a mass of 58 g is kept in a 1500 mL container at a temperature of 100. °C. What is the pressure of the gas?
Answer:
c i took the text
Explanation:
22)When iron rusts in air, iron(III) oxide is produced. How many moles of oxygen will react
with 2.4 mol of iron ?
4Fe(s) + 3O2(g) → 2Fe2O3(s)
A)1.2 mol
B)1.8 mol
C)2.4 mol
D)3.2 mol
E)4.8 mol
show work
Answer:
B
Explanation:
)When iron rusts in air, iron(III) oxide is produced. How many moles of oxygen will react
with 2.4 mol of iron ?
B)1.8 mol
State three pieces of evidence from the diagram which indicate that the plant is pollinated by wind. ( 3 marks)
Your image is saying "Can't load image on this device."
Which of these is true about a pH meter?
It is inexpensive to use.
It measures pH indirectly.
It does not require calibration.
It can be used in any acid-base titration.
Answer:
That is, a pH meter is useful in detecting or knowing the acidity (due to ions) or alkalinity (due to ions) of a solution. Thus, we can conclude that out of the given options it is true about a pH meter that it can be used in any acid-base titration
Answer: D. It can be used in any acid-base titration.
Explanation:
If a shell can hold a maximum of 32 electrons, what is the value of n?
Answer:
The value of N would be 4.
Explanation:
The equation would be 2n^x = 32 and therefore, 4.
Matter takes up _____.
(a) Space and temperature
(b) Space and heat
(c) Space and mass
(d) Heat and temperature
Calculate the total amount of energy required in calories to convert 50.0 g of ice at 0.00 degrees Celsius to steam at 100. degrees Celsius.
Specific heat capacity of water is 1.00 cal/g OC
Hfusion = 80 cal/g OC and Hvap = 540 cal/g OC
Write the complete equation you will use. 1 point
Substitute the values in the equation in step 1. 1 point
Report the math answer with 3 sig figs and the correct unit. 1 point
Answer:
HFusion*mass + Spec.Heat*mass*ΔT + HVap*mass
80cal/g*50.0g + 1.00cal/g°C*50.0g*(100°C-0°C) + 540cal/g*50g
3.60x10⁵cal
Explanation:
Using the HFusion we can find the heat needed to convert the ice to liquid water.
With specific heat capacity we can find the heat needed to increase the temperature of water from 0 to 100°C.
With HVap we can find the heat to convert the liquid water into steam.
The equations are:
HFusion*mass + Spec.Heat*mass*ΔT + HVap*massComputing the values:
80cal/g*50.0g + 1.00cal/g°C*50.0g*(100°C-0°C) + 540cal/g*50g36000cal =
3.60x10⁵calWhat is the volume of 2.66 x 10^23 molecules of N2 gas at STP? PLEASE ANSWER WITH WORK! ILL GIVE BRAINLIEST
Answer:
1100L.
Explanation:
You will not measure the enthalpy of the reaction of ______ in the coffee cup calorimeter because this reaction involves gases. Instead, you will use a well-known published value.
HCI and MgO
HCI and Mg
H2 and O2
Answer:
H2 and O2
Explanation:
A coffee cup calorimeter is basically a type of calorimeter that operates at constant pressure. The heat measured in the calorimeter is equal to the change in enthalpy of the reaction.
This type of calorimeter is apt for reactions involving solutions where there is little or no change in volume.
It is not generally applicable to gas phase reactions such as the reaction between H2 and O2.
Answer:
You will not measure the enthalpy of the reaction of
✔ H2 and O2
in the coffee cup calorimeter because this reaction involves gases. Instead, you will use a well-known published value.
C. H2 and O2
Is Correct
Elias read a book about California earthquakes. He then wrote a three-
paragraph report about the book. Which of the following active reading
strategies did Elias use?
A. Making mental images
B. Drawing inferences
C. Summarizing
D. Making predictions
If the pH = 6.5, what is the [H+]? *
3.16 x 10-7
3.16 x 10-6
O
3.16 x 10-5
Answer:
Key Concepts
The hydrogen ion concentration in a solution, [H+], in mol L-1, can be calculated if the pH of the solution is known.
pH is defined as the negative logarithm (to base 10) of the hydrogen ion concentration in mol L-1 pH = -log10[H+] ...
[H+] in mol L-1 can be calculated using the equation (formula): [H+] = 10-pH
More items...
Explanation:
Answer:
[tex]pH = - log[H {}^{ + } ] \\ 6.5 = - log[H {}^{ + } ] \\ [H {}^{ + } ] = {10}^{ - 6.5} \\ [H {}^{ + } ] = 3.16 \times {10}^{ - 7} \: mol {dm}^{ - 3} [/tex]
Michael is studying the factors that affect corrosion of metals. He wants to test the effect that different concentrations of an acid will have on the corrosion of a metal. As he sets up and completes his experiment, which of the following experimental designs would be most likely to help him answer his question? A. Allow several metal samples to soak in different amounts of acid of a single concentration and then measure the amount of corrosion on each. B. Prepare solutions of different acid concentrations, measure 50 milliliters of each into different beakers, and place metal samples of different types but of the same mass into the beakers. C. After allowing several small metal sheets to be exposed to different acid concentrations, measure the surface area of each that is corroded. D. After allowing a small metal sheet to be exposed to one acid concentration, place it in different acid concentrations, then measure the surface area that is corroded.
Answer:
B. Prepare solutions of different acid concentrations, measure 50 milliliters of each into different beakers, and place metal samples of different types but of the same mass into the beakers.
Explanation:
Since Michael is studying the factors that affect corrosion of metals, and wants to test the effect that different concentrations of an acid will have on the corrosion of a metal, using different acid concentrations of the same volume on different metal samples of the same size would give a much better than all the other options because, a standard volume of acid is used and also a standard mass of metal is used. So, the effect can be measured quantitatively since we have the same quantity of sample.
So, option B is the answer
Describe the four states of matter.
can someone explain the answer.
Answer:
A
Explanation:
Alkanes undergo substitution reaction with halogen molecules in the presence of light. This reaction occurs by free radical mechanism and the initiation step is the formation of the halogen radical.
The propagation steps involves the abstraction of a hydrogen from the alkane by the halogen radicals.
The termination steps involves the coupling of alky radicals.
Thus for the reaction of ethane and chlorine;
C2H6 + Cl2 -------> C2H5Cl + HCl
How much heat is required to raise the temperature of 16.0 grams H2O from 5.000C to 75.00C? Below is a list of constants.
specific heat for H2O(s) = 2.1 J/g0C
specific heat for H2O(L) = 4.18 J/g0C
specific heat for H2O(g) = 1.7 J/g0C
\bigtriangleup H△Hvap = 40.7 kJ/mol
\bigtriangleup H△Hfus = 6.01 kJ/mol
5.34 J
260 J
4680 J
2350 J
Answer:
The amount of heat required is 4681.6 J.
Explanation:
mass, m = 16 g = 0.016 kg
initial temperature, T = 5 C
final temperature, T' = 75 C
specific heat, c = 4.18 J/g C
The amount of heat required is
H = m c (T'- T)
H = 16 x 4.18 x (75 - 5)
H = 4681.6 J
show using dots to illustrate high population density and low population density in the boxes provided in answer to guide questions
Answer:
Just add a plenty of dots in the first one and very few dots in the second one
An area with high population density will have many dots while areas will low population density will have few dots when using dots to illustrate population density.
What is population density?Population density is the ratio of the total number of organisms found in a given area to the total of the area of that place or habitat.
Population density = total number of organisms/total areaAn area with high population density indicates that more organised ate found per unit area than an area with low population density.
Therefore, using dots to illustrate population density, an area with high population density will have plenty dots while areas will low population density will have few dots scattered over.
Learn more about population density at: https://brainly.com/question/13902749
The strength of the gravitational attraction depends on the mass of the objects involved and the distance between them. The gravitational force between two objects will be lowest in which of the following situations?
A. Both objects have small masses and are close together.
B. One object has a large mass, and the objects are close together.
C. Both objects have large masses and are close together.
D. Both objects have small masses and are far apart.
Answer:
d sguro
Explanation:
I'm not sure kung ayan ba
an atom of an element is represented as 39/19x, write its
(1) number of protons
(2)number of neutrons
(3)Electric configuration
(4)number of valence electrons
Answer:
Solution :
Lithium
Z = 3
P = 3
E = 3 = (2, 1) p=3
A = 7 n=4
P + n = A
3 + n = 7
N = 4

Carbon
Z = 6
P = 6
E = 6 = (2, 4) p=6
A = 12 n=6
P + n = A
6 + n = 12
N = 6
Which of these is not a mixture?
A) Salt
B) Cooking oil
C) Tea leaves
D) Milk
ty
Answer:
the answer is salt because it has a uniform and definite composition
Explanation:
What is a balanced nuclear equation for the alpha decay of Strontium-90?
Answer: The balanced nuclear equation for the alpha decay of Sr-90 is [tex]_{38}^{90}\textrm{Sr}\rightarrow _{36}^{86}\textrm{Kr}+_2^4\alpha[/tex]
Explanation:
A nuclear reaction is defined as the reaction in which the changes in the nucleus of an atom take place and usually form a different element. The types of decay processes are:
Alpha decayBeta-decayGamma decayAlpha decay is the process in which a heavy nucleus decays into a light nucleus with the release of an alpha particle. This alpha particle carries a charge of +2 units and has a mass of 4 units. It is also known as the helium nucleus. The general equation for this decay process is:
[tex]X_Z^A\rightarrow Y_{Z-2}^{A-4}+\alpha _2^4[/tex]
The nuclear equation for the alpha decay of strontium-90 isotope follows:
[tex]_{38}^{90}\textrm{Sr}\rightarrow _{36}^{86}\textrm{Kr}+_2^4\alpha[/tex]
PLZ HELP!!! What mass of [tex]SrF_{2}[/tex] can be prepared from the reaction of 10.0g [tex]Sr(OH)_{2}[/tex] with excess HF? THANK U!!
Answer:
Approximately 10.5g or 10.4g [tex]SrF_{2}[/tex]
Use the equation below to answer the following question
2NaHCO3(aq) + Ca(H2PO4)2 (aq) → Na2HPO4 (aq) + CaHPO4 (aq) + 2002 (8) + 2H20 (0)
The theoretical yield of CHPO, is 10 g. If 8 g of CaHPO4 are produced from the reaction shown above, what is the percent yield of CHPO ?
Answer:
Percent Yield = 80%
Explanation:
Percent yield of a reaction is defined as one hundred times the ratio between the actual yield and the theoretical yield. That is:
Percent yield = Actual Yield / Theoretical Yield * 100
Where theoretical yield of CaHPO4 is 10g and actual yield is 8g
Replacing:
Percent yield = 8g / 10g * 100
Percent Yield = 80%ELECTRICITY IS ALLOWED TO PASS THROUGH ACIDIFIED WATER USING THE FOLLOWING EXPERIMENTAL SETUP.
QUESTION: IDENTIFY THE PROCESS
Answer: Electrolysis is passing an electric current through a liquid containing ions so that decomposition reaction takes place.
Electrolysis is passing an electric current through a liquid containing ions so that decomposition reaction takes place.When an electric current is passed through acidified water, it decomposes to give hydrogen and oxygen gas. The hydrogen gas is obtained at the cathode and the oxygen gas is obtained at the anode.
Electrolysis is passing an electric current through a liquid containing ions so that decomposition reaction takes place.When an electric current is passed through acidified water, it decomposes to give hydrogen and oxygen gas. The hydrogen gas is obtained at the cathode and the oxygen gas is obtained at the anode.The reaction for decomposition of water into oxygen and hydrogen is as follows:
Electrolysis is passing an electric current through a liquid containing ions so that decomposition reaction takes place.When an electric current is passed through acidified water, it decomposes to give hydrogen and oxygen gas. The hydrogen gas is obtained at the cathode and the oxygen gas is obtained at the anode.The reaction for decomposition of water into oxygen and hydrogen is as follows:2H2O(l) -------> 2H2(g) + O2(g)
