asset question.....only answers otherwise u will be reported ​

Answer:

Increased

Explanation:

kVp is an acronym for kilovoltage peak, and it determines the strength x-ray beam strength, and the quality of the beam, it is a measure of the highest that the x-ray machine produces. A 60 kVp x-ray will produce photons with a maximum energy of 60 kilovolts while a 70 kVp will produce photons having 70 kilovolts as the maximum energy

Therefore, a high kVp exposure will result in scattered photon that is of increased energy compared with a lower kVp exposure.

Answer:

mechanical waves,

.

the quality of a sound governed by the rate of vibrations producing it; the degree of highness or lowness of a tone.

.

If the amplitude increases the volume increases and vice versa.

.

The type of medium affects a sound wave as sound travels with the help of the vibration in particles.

.

The higher the frequency, the shorter the wavelength.

Explanation:

Answer:

1 . Soundwave

2. pitch are sounds that are high or low corresponding and according to a certain frequency measured in Hertz

3. volume is the increase in sound or decrease in sound how loud or soft something is while amplitude is strength of sound

4. frequency is measured in Hertz one wave per second and wavelength is distance between corresponding points of two recurring and consecutive sound waves

Answer:All of the elements in a period have the same number of atomic orbitals. For example, every element in the top row (the first period) has one orbital for its electrons. All of the elements in the second row (the second period) have two orbitals for their electrons.Explanation:

Answer:

It tells us the principle quantum shell in which the element lies in. In other words, it shows the total number of electron shells the atom has

Explanation:

The Simple Pendulum. A simple pendulum is defined to have a point mass, also known as the pendulum bob, which is suspended from a string of length L with negligible mass ((Figure)). Here, the only forces acting on the bob are the force of gravity (i.e., the weight of the bob) and tension from the string.

hope it helps you

Answer:

speed i uniform

Explanation:

if the speed is constant

Answer:

A

Explanation:

if it has a constant acceleration

Answer:

345 K

Explanation:

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.

Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Given the following data;

To convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;

Kelvin = 273 + °C

Substituting into the formula, we have;

Kelvin = 273 + 72

Kelvin = 345 K

Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.

The length and density of the aluminum cube​ is 15.46 cm and 1,081.1 kg/m³ respectively

The volume of the aluminum is equal to the weight of the kerosene displaced.

V = 0.05 kg / 13.5 kg/m³

V = 3.7 x 10⁻³ m³

density = mass/volume

density = 4 kg / 3.7 x 10⁻³ m³

density = 1,081.1 kg/m³

V = L³

L = ∛V

L = ∛(3.7 x 10⁻³)

L = 0.1546 m

L = 15.46 cm

Thus, the length and density of the aluminum cube​ is 15.46 cm and 1,081.1 kg/m³ respectively.

Learn more about density here: https://brainly.com/question/6838128

#SPJ1

R= 40cm —> R= 0.4 m

P= 2mm —> P= 0.002 m

[tex]V.R = \frac{2πR}{p} = \frac{2 \times 3.14 \times 0.4}{0.002} = 1256[/tex]

I think this is the answer

I hope I helped you

Good luck ^_^

Answer:

The sun uses hydrogen for nuclear fusion.

Answer:

Hydrogen

Explanation:

Answer:

the sun energy comes from nuclea fution

Answer:

The direction of friction force is toards north.

Explanation:

A tool box is at rest on the back of a track. The truck is accelerating towards north.

As the frame of reference is acceleratinf so it is a non inertial frame  of reference.

Thus, teh toolkit experineces a pseudo force towards the south direction.

According to the question, the toolbox is at rest so the fiction force is balances by teh psheudoforce, and thus teh friction force is acting toards north.

Explanation:

A nuclear reactor produces and controls the release of energy from splitting the atoms of certain elements. In a nuclear power reactor, the energy released is used as heat to make steam to generate electricity.

Answer:

DU = 21 KJ

Explanation:

Given the following data;

Quantity of heat = 125 KJ

Work = 104 KJ

To find the change in internal energy;

Mathematically, the change in internal energy of a system is given by the formula;

DU = Q - W

Where;

DU is the change in internal energy.

Q is the quantity of energy.

W is the work done.

Substituting into the formula, we have;

DU = 125 - 104

DU = 21 KJ

After half of a revolution ...

==> Distance = π•r

==> Displacement = 2•r

Every living things gives off thermal energy in the form electromagnetic waves. The electromagnetic wave releasing off is  infrared radiation. Hence, option C is correct.  .

Electromagnetic waves are associated with a combined electric field and magnetic field. They can pass through vacuum as well as through a medium. Unlike mechanical waves, all the electromagnetic waves are transverse waves.

The oscillation of particles is in the direction perpendicular to the wave propagation. There are 7 types of  radiations in the electromagnetic spectrum. The light we see is called visible light.

The infrared waves are located in between microwaves and visible light. Every  living thing gives off thermal energy in the form of infrared radiation. Hence, option C is correct.

Find more on infrared waves:

https://brainly.com/question/30309627

#SPJ2

Answer:

1. 45 m

2. 50 m/s

Explanation:

From the question given above, the following data were obtained:

Initial velocity (u) = 20 m/s

Time (t) = 3 s

1. Determination of the position (i.e height)

Time (t) = 3 s

Acceleration due to gravity (g) = 10 m/s²

Height (h) =?

h = ½gt²

h = ½ × 10 × 3²

h = 5 × 9

h = 45 m

2. Determination of the velocity.

Initial velocity (u) = 20 m/s

Time (t) = 3 s

Acceleration due to gravity (g) = 10 m/s²

Velocity (v) =?

v = u + gt

v = 20 + (10 × 3)

v = 20 + 30

v = 50 m/s

26. D. crushing the sugar cube and dissolving it in water.

27. A. atom

28. B. molecule

29. B. plum pudding model of Joseph John Thomson

30. B. He used cathode ray tubes which showed that all atoms contain tiny negatively charged subatomic particles or electrons.

31. D. protons and neutrons are relatively heavier than electrons.

Answer:

Explanation:

After much working on this, I got the force between A and C to be 12 and the force between B and C to be 9. the total force I found then was 15 N at 53 degrees. I used the angle between A and C as 90 degrees and the angle between B and C to be 0 )I just rotated the right triangle a bit to make it easier to work with).

Answer:

True.

Explanation:

The velocity vector is constant in magnitude but changing in direction. Because the speed is constant for such a motion, many students have the misconception that there is no acceleration. ... But the fact is that an accelerating object is an object that is changing its velocity.

Answer:

6. a. friction between a tire and the road

7. c. energy of motion

8. c. the force with which a moving vehicle hits another object

Explanation:

6. As a car moves along the road, the tires push back against the ground. As tires push back against the ground, the road exerts and opposing force to the motion of the tires. This opposing force is the friction between the tires and the road. This opposing force between the tires and the rad is called traction.

So, the answer is a

7. As an object moves, it has energy. This energy due to its motion is called kinetic energy.

So, the answer is c

8. When a moving vehicle hits another object, it exerts a force on the object. The process of the vehicle hitting the other object is called impact and the force exerted on the object is called the force of impact.

So, the answer is c.

Answer:

The ray box used as the source of light

Answer: its A

Explanation: i just did the test and got it right also known. The ray used as the source of light

Answer:

B. seafloor spreading

Explanation:

divergent motion between the Eurasian and North American, and African and South American Plates. ... In this way, as the plates move further apart new ocean lithosphere is formed at the ridge and the ocean basin gets wider

geological society

Answer:

The answer is "[tex]1.01 \times 10^{-13}[/tex]"

Explanation:

Using the law of conservation for energy. Equating the kinetic energy to the potential energy.

[tex]KE=U=\frac{kqq'}{r}\\\\[/tex]

Calculating the closest distance:

[tex]\to r=\frac{kqq'}{KE}\\\\[/tex]

[tex]=\frac{k(2e)(79e)}{KE}\\\\=\frac{k(2)(79)e^2}{KE}\\\\=\frac{9.0\times 10^9 \ N \cdot \frac{m^2}{c}(2)(79)(1.6 \times10^{-19} \ C)^2}{(2.25\ meV) (\frac{1.6 \times 10^{-13} \ J}{1 \ MeV})}\\\\[/tex]

[tex]=\frac{9.0\times 10^9 \times 2\times 79\times 1.6 \times10^{-19}\times 1.6 \times10^{-19} }{(2.25 \times 1.6 \times 10^{-13}) }\\\\=\frac{3,640.32\times 10^{-29}}{3.6 \times 10^{-13} }\\\\=\frac{3,640.32}{3.6} \times 10^{-16}\\\\=1011.2 \times 10^{-16}\\\\=1.01 \times 10^{-13}[/tex]

Answer:

65000g

24.325 hrs

7500m

Answer:

I) 65000 g   II)24.325 hours  III)7500 m

Explanation:

I) 1 kg = 1000 g

65 kg = 65 * 1000 g = 65000 g

II) 1 hour = 3600 seconds

1 second = 1/3600 hours

87570 seconds = 87570 * 1/3600 hours =24.325 hours

III) 1 km = 1000 m

7.5 km = 7.5 * 1000 m = 7500 m

Answer:

1. 12 V

2a. R₁ = 4 Ω

2b. V₁ = 4 V

3a. A = 1.5 A

3b. R₂ = 4 Ω

4. Diagram is not complete

Explanation:

1. Determination of V

Current (I) = 2 A

Resistor (R) = 6 Ω

Voltage (V) =?

V = IR

V = 2 × 6

V = 12 V

2. We'll begin by calculating the equivalent resistance. This can be obtained as follow:

Voltage (V) = 12 V

Current (I) = 1 A

Equivalent resistance (R) =?

V = IR

12 = 1 × R

R = 12 Ω

a. Determination of R₁

Equivalent resistance (R) = 12 Ω

Resistor 2 (R₂) = 8 Ω

Resistor 1 (R₁) =?

R = R₁ + R₂ (series arrangement)

12 = R₁ + 8

Collect like terms

12 – 8 =

4 = R₁

R₁ = 4 Ω

b. Determination of V₁

Current (I) = 1 A

Resistor 1 (R₁) = 4 Ω

Voltage 1 (V₁) =?

V₁ = IR₁

V₁ = 1 × 4

V₁ = 4 V

3a. Determination of the current.

Since the connections are in series arrangement, the same current will flow through each resistor. Thus, the ammeter reading can be obtained as follow:

Resistor 1 (R₁) = 4 Ω

Voltage 1 (V₁) = 6 V

Current (I) =?

V₁ = IR₁

6 = 4 × I

Divide both side by 4

I = 6 / 4

I = 1.5 A

Thus, the ammeter (A) reading is 1.5 A

b. Determination of R₂

We'll begin by calculating the voltage cross R₂. This can be obtained as follow:

Total voltage (V) = 12 V

Voltage 1 (V₁) = 6 V

Voltage 2 (V₂) =?

V = V₁ + V₂ (series arrangement)

12 = 6 + V₂

Collect like terms

12 – 6 = V₂

6 = V₂

V₂ = 6 V

Finally, we shall determine R₂. This can be obtained as follow:

Voltage 2 (V₂) = 6 V

Current (I) = 1.5 A

Resistor 2 (R₂) =?

V₂ = IR₂

6 = 1.5 × R₂

Divide both side by 1.5

R₂ = 6 / 1.5

R₂ = 4 Ω

4. The diagram is not complete

Answer:

the acceleration of the elevator is increasing

Explanation:

For this exercise we propose the solution using Newton's second law

         F -W = m a

         F = m (g + a)

If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.

Answer:

products would appear after the raw materials

Explanation:

raw material + raw material = product (anything deriving from combining two materials)

Answer:

The strain will come to rest after traveling some distance.

distance traveled = 2500 m

Explanation:

The strain will come to rest after traveling some distance.

Applying,

s = ut+at²/2................... Equation 1

Given: u = initial velocity, a = deceleration, t = time, s = distance

From the question,

Given: u = 50 m/s, t = 100s, a = -0.5 m/s²(deceleration)

Substitute these values into equation 1

s = 50(100)+(-0.5)(100²)/2

s = 5000-2500

s = 2500 m

Hence the distance traveled is 2500 m