Answer:
0.05 cents per fl oz
Explanation:
0.95 divided by 20
0.0475 to the nearest cent 0.05
Need help on circuit question
Indica qué es una propiedad específica de la materia. Además explica por qué son útiles las propiedades específicas de la materia frente a las generales.
Answer:
Check Explanation
Comprobar explicación
Explanation:
English Translation
Indicate what a specific property of matter is. Also explain why the specific properties of matter are useful compared to the general ones.
Solution
The specific properties of matter are properties that describes the intensive properties of the system. They are properties that do not depend on or change with the extent or size of the system. They are usually obtained by dividing the generalised properties or extensive properties by the extent or size of matter to make them independent of size/extent/Mass.
Examples of specific properties include specific heat capacity, specific volume etc. They usually have units of general units/Mass units.
The specific properties of matter are more important than the general ones because
- They help in general comparisons of the properties of different materials. They are used to rank, classify and compare properties of different materials.
- They are used in reference table/data to easily record easily accessible properties of matter. It helps to record standards that are general and independent of sizes/extents/Mass, thereby keeping the reference table/data/chart precise and concise.
- They provide us with values that are easy to memorize and remember, unlike trying to cram the different properties of different masses/sizes of matter.
In Spanish/En español
Las propiedades específicas de la materia son propiedades que describen las propiedades intensivas del sistema. Son propiedades que no dependen ni cambian con la extensión o el tamaño del sistema. Por lo general, se obtienen dividiendo las propiedades generalizadas o las propiedades extensivas por la extensión o el tamaño de la materia para hacerlas independientes del tamaño / extensión / masa.
Los ejemplos de propiedades específicas incluyen capacidad calorífica específica, volumen específico, etc. Usualmente tienen unidades de unidades generales / unidades de masa.
Las propiedades específicas de la materia son más importantes que las generales porque
- Ayudan en las comparaciones generales de las propiedades de diferentes materiales. Se utilizan para clasificar, clasificar y comparar propiedades de diferentes materiales.
- Se utilizan en la tabla / datos de referencia para registrar fácilmente propiedades de materia fácilmente accesibles. Ayuda a registrar estándares que son generales e independientes de tamaños / extensiones / masa, manteniendo así la tabla / datos / tabla de referencia precisa y concisa.
- Nos proporcionan valores que son fáciles de memorizar y recordar, a diferencia de tratar de agrupar las diferentes propiedades de diferentes masas / tamaños de materia.
Hope this Helps!!!
¡¡¡Espero que esto ayude!!!
Gold, quartz, and talc are minerals. Copper and iron are types of ore. What is the difference between minerals and ores?
A mineral is a non-living, solid substance that can be extracted from the ground. Ore is a type of mineral made up of metals.
An ore is non-living and solid with little value unless it occurs in large amounts, in which case it is a mineral.
O A mineral is a valuable form of ore that can be extracted from the ground
O A mineral is a non-living, solid substance made of elements. Ore is a large deposit of one or more valuable minerals in the ground.
Answer:
A mineral is a valuable form of ore that can be extracted from the ground
Explanation:
Gold, quartz and talc are minerals because they are found in the earth in a valuable form of ore while ores are rocks that contain valuable concentrations of minerals.that can be mined.
An ORE in general term can be said to be a mineral deposit that contains enough Minerals that can be mined in commercial quantities while Minerals are valuable components of an Ore that can be mined ( naturally occurring ) in an ORE.
Diffraction of white light with a single slit produces bright lines of different colors.What is the color of the central image?
Answer:
white
Explanation:
This experiment causes lines of different colors because the constructive interference depends on the wavelength, so for different wavelength, the position of the maximum will be different.
Now, in diffraction fo a single slit we always have a central maximum (for all the colors)
This means that after the diffraction, we will have that all the colors have a maximum in the center, which will produce white light again, then the color of the central image is white
What energy transformations take place in Joule's system?
A boat at anchor is rocked by waves whose crests are 28 m apart and whose speed is 7 m/s. How often do these waves reach the boat? State your answer in terms of frequency (Hz) and period T (seconds).
Answer:
0.25 Hz
4 s
Explanation:
Speed = wavelength × frequency
7 m/s = 28 m × f
f = 0.25 Hz
Frequency = 1 / period
0.25 Hz = 1 / T
T = 4 s
What is the critical angle for glass when the refractive index is 1.45
Answer:43.6°
Explanation:
Refractive index=n=1.45
Critical angle=c
n=1/sinc
1.45=1/sinc
Cross multiply
1.45sinc=1
Divide both sides by 1.45
(1.45sinc)/1.45=1/1.45
sinc=0.6897
c=sin(inverse)(0.6897)
c=43.6°
Critical angle is 43.6°
terms used to measure motion
Answer:
velocity term
Explanation:
Answer:velocity term
Explanation:
Uranium-235 has 92 protons. How many neutrons does it have?
Answer:
146 neutrons.
Explanation:
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz mark me brainliest
Answer: The atomic number of uranium (see periodic table) is 92, and the mass number of the isotope is given as 238. Therefore, it has 92 protons, 92 electrons, and 238 — 92 : 146 neutrons.
Explanation:
A chocolate wrapper is 6.7 cm long and 5.4 cm wide. Calculate its area up to
reasonable number of significant figures.
Determine the magnetic flux through a square loop of side a if one side is parallel to, and a distance b from a straight wire that carries a current I.
1. If the loop is pulled away from the wire at speed v, what emf is induced in it?
2. Which way does the induced current flow through the loop?
3. How does the emf vary in time, if the initial position of the left vertical side was b0 at time t=0?
4. Determine the force F required to pull the loop away from the line of current.
Answer:
Find the given attachments
Which statement is NOT an advantage of renewable resources? A They produce clean energy. B They are expensive to collect and transform into energy. C They are safe for the environment. D They replenish quickly.
Answer:
B. They are expensive to collect and transform into energy.
Explanation:
All of the other options are positive aspects of renewable resources. B is the only disadvantage of renewable resources given in the question.
Answer:
They are expensive to collect and transform into energy.
Explanation:
Edge
You have a large flashlight that takes 4 D-cell batteries, each with a voltage of 1.5 volts. If the current in the flashlight is 2.0 amps, what is the
resistance?
A 12 ohms
B 0.75 ohms
C 3.0 ohms
D.0.5 ohms
E. 6.0 ohms
Answer:
The answer is "C. 3.0 ohms".
Explanation:
Ohm's law states the following:,
V = IR
where:
Voltage (V) = 1.5 volts × 4 batteries = 6.0 volts
Current (I) = 2.0 amps
Resistance (R) = ? ohms
To solve for Resistance (R) the equation must be rearranged this way:
R = V / I
Then, the variables must be replaced with the known values:
R = 6.0 volts / 2.0 amp
R = 3.0 ohms
The answer is C. 3.0 ohms.
------------
P.D: I got it right on PLATO
A paint brush is dropped from the top of a tall ladder and free falls to the ground. What changes, if any, would be observed of the velocity and the acceleration of the brush as it falls? Pick the two answers. The velocity increases. The velocity decreases. The velocity remains a constant value. The acceleration increases. The acceleration decreases. The acceleration remains a constant value.
Answer:
Explanation:
As the paint brush is dropped from the top of a tall ladder it started free falling
i.e. velocity of brush increases as it falls down due to the acceleration provided by gravity.
We know acceleration due to gravity is the attraction experienced by the object due to earth attraction
Value of acceleration due to gravity is constant i.e. [tex]9.8\ m/s^2[/tex]
Therefore the correct choice is
velocity is increasing and acceleration is constant
The baker needs 9 eggs, 6 cups of flour, 3 cups of sugar, and 3 sticks of butter to make a total of 3 cakes.. The baker only has 2 sticks of butter. That means the butter is the ___________ because the baker can only make 2 cakes!
Question 19 options:
Product
Reactant
Limiting reactant
Spontaneous reactant
Answer: Limiting reactant
Explanation:
The limiting reactant is a reactant will get completely consumed up in the reaction. This reactant being in low concentration will lead to the formation of limited amount of product.
In the given situation, since the butter cakes are required to be 3 sticks for making 3 cakes but only 2 cakes are available thus the butter stick is the limiting reactant.
When using the lens equation, a negative value as the solution for d baseline i indicates that the image is
A. real
B. virtual
C. upright
D. inverted
When using the lens equation, a negative value as the solution for d baseline i indicates that the image is Virtual. The correct option is B.
What is reflection?When a light strikes on a shiny surface, it reflects back the light ray in the same medium. The phenomenon is called reflection and the ray is called the reflected ray.
From the Len's maker formula, e have
1/f = 1/u + 1/v
where f = radius of curvature /2
So, the negative value as the solution for d baseline i indicates that the image is Virtual.
Thus, the correct option is B.
Learn more about reflection.
https://brainly.com/question/2254222
#SPJ5
In an inelastic collision, which of the following statements is always true?
[A] Kinetic energy is conserved in the collision.
[B] Momentum is conserved in the collision.
[C] After the collision, the objects always merge into one.
[D] The collision takes more that 1 second to complete.
Answer: A
Explanation:
A
Which of the following is a conversion from light energy to chemical energy?
a. turning on a stove to heat dinner
b. growing an apple tree
c. turning on a lamp
d. Turning on a blender
Answer:
A
Explanation:
turning on a stove to heat dinner because it undergoes a chemical reaction to transform into other substance
Growing up a tree is a conversion from light energy to chemical energy.
What is law of energy conservation?Energy can neither be created nor be destroyed , it gets only transferred from one form to another.
What is photosynthesis?The process by which green plants and some other organisms use sunlight to synthesize foods from carbon dioxide and water.In simple words by the process of photosynthesis a tree makes food for itself.What happens when a tree grows?Tree makes food by absorbing the sunlight.The energy of the sunlight is used in making of ATPs in trees.ATP ( Adenosine triphosphate ) is used in various operations in trees.So, the sunlight is light energy which get converted into ATPs , which is chemical energy.
Thus, Growing up a tree is a conversion from light energy to chemical energy.
Learn more about Photosynthesis here -
https://brainly.com/question/19160081
#SPJ2
. How does the intensity of sunlight received affect Earth’s temperatures?
Which of the following particle is responsible for the transfer of static charge?
A. Neutron
B. Electron
C. Proton
D. A & C
Answer:
B. Electron
Static charge is produced by electron transfer.
Explanation:
Answer A: The neutron does not possess a charge and is said to be neutral.
Answer D: Protons and neutrons never move from object to object.
Only negative charges can move freely from one object to another. The energy that comes from these charges particles is called electrical energy.
....
Hope this answer can help you.
The answer is an electron.
Which nanotechnology product would most likely help the
electronics company?
biomaterials
carbon wires
quantum dots
OLEDs
Answer: OLEDs
Explanation:
The nanotechnology uses the surface of the carbon materials to generate the electricity. The evaporation of water on the surface of carbon materials helps in generation of electrical energy due to generation of thermal energy.
OLEDs can be defined as solid-state devices that comprises of organic molecules like carbon that will create electricity by exposing a surface for generation of thermal energy.
explain how muscles and bones work together to help bend the arm.
Answer:
Bones make sure the arms structure is stable while the muscle is the one actively moving it and carrying out actions.
En la etiqueta de un bote de fabada de 350 g, leemos que su aporte energético es de 1630 kj por cada 100 g de producto a) La cantidad de fabada que tiene que comer un hombre si su necesidad energética diaria es 2500 kj para sobrevivir b) El aporte calórico del bote de fabada en calorías
Answer:
(a) 153.37 g
(b) 5705 kJ
Explanation:
(a) To find the amount of bean needed by a man you first calculate the equivalence in beans to 2500kJ
[tex]2500kJ*\frac{100g}{1630kJ}=153.37\ g[/tex]
Thus, 153.37 g has the energy needed by a man that needs 200kJ per day.
(b) The amount of energy per pot of bean is given by:
[tex]E=350g*\frac{1630kJ}{100g}\\\\E=5705\ kJ[/tex]
Thus, the energy is 5705kJ
Rohit placed a pencil perpendicular to principal axis in front of a converging
mirror of focal length 30 cm. The image formed is twice the size of the pencil.
Calculate the distance of the object from the mirror.
Answer:
45 cm ( in my opinion)♀️
Explanation:
( Using the mirror formula)
1/ u + 1/v = 1/f
( introducing magnification; m into the formula )
u( 1/u + 1/v ) =u×1/f
1 + u/v =u/f
( But u/v =1 ÷v/u= 1/m)
1 +1/m =u/f
(Supposing m is actually equal to 2, and f =30 cm, then;)1 + 1/2 =u/30
2+1= u/15
3=u/15
3×15=u
45 cm=u
IS IT right to the left a b c d
Answer:
c ok
Explanation: right?
Answer:
16
Explanation:
Object A has a mass of 10 kg and is moving at a velocity of 2.0
m/s. So Object A's momentum is - kg. m/s.
Answer:20kgm/s
Explanation:
Mass=10kg
Velocity=2m/s
Momentum=mass x velocity
Momentum=10 x 2
Momentum=20
Momentum=20kgm/s
The object with mass m when moving with the velocity, its momentum can be calculated. The momentum of the object A is 20 kg.m/s.
What is momentum?Momentum is the product of mass and velocity of a moving object.
If the momentum is p, the mass of the object is 10 kg and the velocity is 2.0 m/s, then the momentum will be
p = 10 × 2.0
p = 20 kg.m/s
Thus, the momentum of the object A is 20 kg.m/s
Learn more about momentum.
https://brainly.com/question/24030570
#SPJ2
10 pts!!!!!! please answer ASAP picture and inscription included
The wavelength of a wave is equal to the distance from one disturbance to
the next and is measured in meters. If the distance between two wave
crests is 2 m, what is the wavelength?
Answer:
2m
Explanation: a crest is a disturbance
Answer:
I think its 4m, but don't quote me. hope I helped
Ski lift carry people along 150 m cable up the side of a mountain. Riders are lifted a total of 75 m in elevation. What is the ideal mechanical advantage of the ski lift?
Ideal Mechanical Advantage (IMA) can be found by using the formula:
IMA = ID/OD
ID = Input Distance
OD = Output Distance
In the question, we are given:
ID = 150
OD = 75
Now, solve the expression with what we have.
IMA = 150/75
IMA = 2
Therefore, the IMA is 2.
Best of Luck!
A trip is taken that passes through the following points in order
Point A 0 m
Point B 15.0 m
Point C -30.0 m
Point D -20.0 m
Point E 10.0 m
Point F 5.0 m
What is the distance from Point C to Point E?
answers :
20.0 m
40.0 m
-20.0 m
10.0 m
Answer:
40.0 m
...............
Answer:
35
Explanation:
Which of the following statements about developing a personal fitness program is NOT true?
A When developing a personal fitness program, it is important to implement strategies that will help
maintain the program as well as give it a successful start
B. Personal factors such as age, health concerns, and likes are important to consider when developing
a personal fitness program
C. The starting skill level of the physical activities included in a personal fitness program should be
determined from other individuals' fitness programs
D. The FITT principle should be used when developing a personal fitness program,
Please select the best answer from the choices provided
A
B
Save and Exit
Next
Answer:
C
Explanation:
The starting skill level of the physical activities included in a personal fitness program should be determined from other individuals' fitness programs is a statement which is not true. Everyone starts their personal fitness journey at a different level which should be regarded . A fitness test should be taken to determine where an individual should start their new lifestyle.
Answer:
C. I got it right :)
Explanation:
