At which point is the kinetic energy of the pendulum the greatest?

C

A

D

B

Answer:

True.

Explanation:

If the sum of the external forces on an object is zero, then the sum of the external torques on it  must also be zero.

The net external force and the net external torque acting on the object have to be zero for an object to be in mechanical equilibrium.

Hence, the given statement is true.

Answer:

a)[tex]V=1.067\: m/s[/tex]

b)[tex]v=434.65\: m/s [/tex]  

Explanation:

a)

Using the conservation of energy between the moment when the bullet hit the block and the maximum compression of the spring.

[tex]\frac{1}{2}MV^{2}=\frac{1}{2}k\Delta x^{2}[/tex]

Where:

Then, let's find the initial speed of the bullet-block system.

[tex]V^{2}=\frac{k\Delta x^{2}}{M}[/tex]

[tex]V=\sqrt{\frac{6.17*10^{2}*0.0634^{2}}{2.17935}}[/tex]

[tex]V=1.067\: m/s[/tex]

b)

Using the conservation of momentum we can find the velocity of the bullet.

[tex]mv=MV[/tex]

[tex]v=\frac{MV}{m}[/tex]

[tex]v=\frac{2.17935*1.067}{0.00535}[/tex]

[tex]v=434.65\: m/s [/tex]  

I hope it helps you!

It does not change the chemical composition of water.

Answer:

when the mass of an object is decreased, the acceleration will increase

when mass is increased, acceleration decreases

Answer:

Electromechanical transducer and Electrical receiver.

Explanation:

Electromechanical transducer is the part of a communication system which converted electrical waves or electrical energy into sound waves. The most common example loudspeaker while on the other hand, Electrical receiver is a device that converts electrical energy into another form of energy, except thermal. Examples are cell phones, computers and television.

Answer:

Smaller and upside down

Explanation:

To answer the question, we must recognise that the characteristics of the image formed by a convex lens depends on the position of the object from the lens.

From the diagram given in the question above, the following data were obtained:

1. The image is smaller than the object.

2. The image is inverted i.e upside down.

3. The image is closer to the lens

4. The image between 2f and f

Now, considering the options given in question above, the correct answer to the question is:

The image is smaller and upside down.

Answer: I beleive A

Explanation:

Answer:

A

Explanation:

We can see the light being reflected off the mirror.

Answer:

increased because as you run into each sound wave the time between each sound decreases meaning the period of each wave decreases to your years and since f=1/T and T is decreasing by greater than 0, f must increase.

Explanation:

Answer:

The magnitude of the electric field is same while the direction at the left and at the right is opposite to each other.

Explanation:

The direction of the electric field due to the dipole on the axial line is same as  the direction of dipole moment.

The magnitude of the electric field due to an electric dipole on its axial line is

[tex]E=\frac{2kp}{r^3}[/tex]

where, k is the constant, p is the electric dipole moment and r is the distance from the center of dipole.

The magnitude of the electric field is same while the direction at the left and at the right is opposite to each other.  

Answer:

The direction of magnetic field is along + Z axis.

Explanation:

The direction of motion of electron is along y axis.

The magnetic  force is along - X axis.

The force on the charged particle moving in the magnetic field is

[tex]\overrightarrow{F} = q (\overrightarrow{v}\times \overrightarrow{B})\\\\- F \widehat{i} = - q (v \widehat{j}\times \overrightarrow{B})\\[/tex]

So, the direction of the magnetic field is along + Z axis.

Answer:

The inductance is 17784.96 ohm and rms current is 4.77 mA.

Explanation:

Voltage, V = 120 V

frequency, f = 60 Hz

Inductance, L = 47.2 H

The rms  voltage is

[tex]V_{rms}=\frac{V_o}{\sqrt 2}\\\\V_{rms}=\frac{120}{\sqrt 2}\\\\V_{rms} = 84.87 V[/tex]

The reactance is given by

[tex]X_L = 2\pi f L\\\\X_L = 2\times 3.14\times 60\times 47.2 \\\\X_L = 17784.96 ohm[/tex]

The rms current is

[tex]I_{rms} =\frac{V_{rms}}{X_L}\\\\I_{rms}=\frac{84.87}{17784.96}\\\\I_{rms} = 4.77\times 10^{-3} A = 4.77 mA[/tex]

Answer:

D) the two spheres remain of equal size.

Explanation:

Answer:

The velocities of the skaters are [tex]v_{1} = 3.280\,\frac{m}{s}[/tex] and [tex]v_{2} = 0.024\,\frac{m}{s}[/tex], respectively.

Explanation:

Each skater is not under the influence of external forces during process, so that Principle of Momentum Conservation can be used on each skater:

First skater

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex] (1)

Second skater

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex] (2)

Where:

[tex]m_{1}[/tex] - Mass of the first skater, in kilograms.

[tex]m_{2}[/tex] - Mass of the second skater, in kilograms.

[tex]v_{1,o}[/tex] - Initial velocity of the first skater, in meters per second.

[tex]v_{1}[/tex] - Final velocity of the first skater, in meters per second.

[tex]v_{b}[/tex] - Launch velocity of the meter, in meters per second.

[tex]v_{2}[/tex] - Final velocity of the second skater, in meters per second.

If we know that [tex]m_{1} = 70\,kg[/tex], [tex]m_{b} = 0.043\,kg[/tex], [tex]v_{b} = 32\,\frac{m}{s}[/tex], [tex]m_{2} = 58.5\,kg[/tex] and [tex]v_{1,o} = 3.30\,\frac{m}{s}[/tex], then the velocities of the two people after the snowball is exchanged is:

By (1):

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex]

[tex]m_{1}\cdot v_{1,o} - m_{b}\cdot v_{b} = m_{1}\cdot v_{1}[/tex]

[tex]v_{1} = v_{1,o} - \left(\frac{m_{b}}{m_{1}} \right)\cdot v_{b}[/tex]

[tex]v_{1} = 3.30\,\frac{m}{s} - \left(\frac{0.043\,kg}{70\,kg}\right)\cdot \left(32\,\frac{m}{s} \right)[/tex]

[tex]v_{1} = 3.280\,\frac{m}{s}[/tex]

By (2):

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex]

[tex]v_{2} = \frac{m_{b}\cdot v_{b}}{m_{2}+m_{b}}[/tex]

[tex]v_{2} = \frac{(0.043\,kg)\cdot \left(32\,\frac{m}{s} \right)}{58.5\,kg + 0.043\,kg}[/tex]

[tex]v_{2} = 0.024\,\frac{m}{s}[/tex]

Answer:

................ftf6x

Answer:

 μ = 0.15

Explanation:

Let's start by using Hooke's law to find the force applied to the block

          F = k x

          F = 87.0 0.065

          F = 5.655 N

Now we use the translational equilibrium relation since the block has no acceleration

          ∑ F = 0

          F -fr = 0

          F = fr

the expression for the friction force is

          fr = μ N

if we write Newton's second law for the y-axis

          N -W = 0

          N = W = mg

we substitute

          F = μ mg

          μ = F / mg

          μ = [tex]\frac{5.655}{3.8 \ 9.8}[/tex]

          μ = 0.15

The time period of the spring is 2[tex]\pi[/tex][√(m/k)].

The spring constant of a spring is defined as the measurement of ratio of the force that is exerted on the spring to the displacement caused by it.

Here,

The mass of the block = m

Let F be the applied force on the spring and k be the spring constant.

When the mass attached to the spring is pulled to one side then released, it executes SHM.

Therefore we can write that, the applied force,

F = kx

Restoring force = -kx

According to Newton's law, we know that,

F = ma

So,

ma = -kx

Therefore, the acceleration,

a = (-k/m) x

For an SHM, the acceleration is given as,

a = -ω²x

Therefore, we can write that,

-ω²x = (-k/m) x

ω² = k/m

So, the time period of the spring,

T = 2[tex]\pi[/tex]/ω

T = 2[tex]\pi[/tex][√(m/k)]

Hence,

The time period of the spring is 2[tex]\pi[/tex][√(m/k)].

To learn more about spring constant, click:

https://brainly.com/question/20785296

#SPJ2

Answer:

7.46×10⁻⁶ m

Explanation:

Applying,

F = kqq'/r²............ Equation 1

make r the subject of the equation

r = √(F/kqq').......... Equation 2

From the question,

Given: F = 8 N, q' = q= 4 C

Constant: k = 8.98×10⁹ Nm²/C²

Substitute these values into equation 2

r = √[8/(4×4×8.98×10⁹)]

r = √(55.7×10⁻¹²)

r = 7.46×10⁻⁶ m

Answer:

Option B.

Explanation:

Remember that we can think on any movement as a sum of a movement in the y-axis, the movement in the x-axis, and the movement in the z-axis. And these are not related, this means that, for example, the movement in x does not affect the movement in y.

So, when we analyze the problem of "how long takes an object to hit the ground"

We do not care for the horizontal motion of the object, we only care for the vertical motion of the object.

So, if an object is dropped, and another has a given initial velocity in the x-axis, in both cases the initial velocity in the y-axis will zero.

And in both cases, the only vertical force acting on the balls will be the gravitational force (so both objects will have the same vertical acceleration and the same vertical initial velocity) with this, we already know that the vertical motion of both objects will be exactly the same.

So, both objects will hit the ground at the same time.

(notice that here we are ignoring things like air resistance and other complex forces)

So here the correct option is b:  Neither. Their vertical motion is the same, so they will reach the ground at the same time.

Answer:

The highest point in the trajectory occurs at the midpoint of the path. This highest point increases as the angle increases. At a 75° launch angle, the maximum height is approximately 76 meters. However, a further increase in launch angle beyond this 75° angle will increase the peak height even more.

Answer:

978.6084 Newton

Explanation:

Given the following data;

To find the weight in Newtown;

Conversion:

1 lb = 4.448220 N

220 lb = 220 * 4.448220 = 978.6084 Newton

220 lb = 978.6084 Newton

Therefore, the weight of the astronaut in Newton is 978.6084.

Weight can be defined as the force acting on a body or an object as a result of gravity.

Mathematically, the weight of an object is given by the formula;

Weight = mg

Where;

Note:

Answer:

1.67 m

Explanation:

The potential energy change of the small ball ΔU equals the work done by the buoyant force, W

ΔU = -W

Now ΔU = mgΔh where m = mass of small ball = ρV where ρ = density of small ball and V = volume of small ball. Δh = h - h' where h = final depth of small ball and h' = initial height of small ball = 5 m. Δh = h - 5

ΔU = mgΔh

ΔU = ρVgΔh

Now, W = ρ'VgΔh'   where ρ = density of water and V = volume of water displaced = volume of small ball. Δh' = h - h' where h = final depth of small ball and h' = initial depth of small ball at water surface = 0 m. Δh' = h - h' = h - 0 = h

So, ΔU = -W

ρVgΔh = -ρ'VgΔh'

ρVg(h - 5) = -ρ'Vgh

ρ(h - 5) = -ρ'h

Since the density of the small ball equals 1/2 the density of water,

ρ = ρ'/2

ρ(h - 5) = -ρ'h

(ρ'/2)(h - 5) = -ρ'h

ρ'(h - 5)/2 = -ρ'h

(h - 5)/2 = -h

h - 5 = -2h

h + 2h = 5

3h = 5

h = 5/3

h = 1.67 m

So, the maximum depth the ball reaches is 1.67 m.

Answer:

false.

Explanation:

We know that for a wave that moves with velocity V, with a wavelength λ, and a frequency f, we have the relation:

V = λ*f

So, if the velocity is constant and we increase the frequency to:

f' > f

we will have a new wavelength λ'

Such that:

V = f'*λ'

And V = f*λ

Then we have:

f'*λ' = f*λ

Solvinf for λ', we get:

λ' =(f/f')*λ

And because:

f' > f

then:

(f/f') < 1

Then:

λ' =(f/f')*λ < λ

So, if we increase the frequency, we need to decrease the wavelength.

So, for higher frequency waves, we must have proportionally shorter wavelengths.

Then we can conclude that the given statement:

"or waves moving through the atmosphere at a constant velocity, higher frequency waves must have proportionally longer wavelengths"

is false.

Answer: objective lens

Explanation:

Light enters a refra

Light enters a telescope through a lens at the upper end, which focuses the light near the bottom of the telescope. An eyepiece then magnifies the image so that it can be viewed by the eye, or a detector like a photographic plate can be placed at the focus. The upper end of a reflecting telescope is open, and the light passes through to the mirror located at the bottom of the telescope. The mirror then focuses the light at the top end, where it can be detected. Alternatively, a second mirror may reflect the light to a position outside the telescope structure, where an observer can have easier access to it.

Answer:

2m

Explanation:

wavelength=speed/frequency

=340/170

=2m

Answer:

Explanation:

A coin and feather dropped in a moon experience the same acceleration due to gravity as small as 1.625 m/s², and because of the absence of air resistance both will fall at the same rate to the ground.

If the same coin and feather are dropped in the earth, they will experience the same acceleration due to gravity of 9.81 m/s² and because of the presence of air resistance, the heavier object (coin) will be pulled faster to the ground by gravity than the lighter object (feather).

Answer:

A (3 seconds)

Explanation:

Well here we have a type of motion called projectile motion and it is pretty similar to an upside down parabola. The top of the trajectory is the vertex of the parabola and is also when v=0.

Lets identify our givens.

Givens:

Horizontal speed= 30m/s

Vertical Speed= 30 m/s

Since the ball is in freefall after being launched ay=-g(take up to be positive) and ax=0

The ball is launched from the ground so y0=0

Final vertical velocity= 0

This problem is now relatively easy because we only need to find the vertical distance so we can ignore horizontal speed and use

vy=vy0+ayt

Plug in our givens

0=30-10t

solve for t

t=3 seconds

Explanation:

Forces on Block A:

Let the x-axis be (+) towards the right and y-axis be (+) in the upward direction. We can write the net forces on mass [tex]m_A[/tex] as

[tex]x:\:\:(F_{net})_x = f_N - T = -m_Aa\:\:\:\:\:\:\:(1)[/tex]

[tex]y:\:\:(F_{net})_y = N - m_Ag = 0 \:\:\:\:\:\:\:\:\:(2)[/tex]

Substituting (2) into (1), we get

[tex]\mu_km_Ag - T = -m_Aa \:\:\:\:\:\:\:\:\:(3)[/tex]

where [tex]f_N= \mu_kN[/tex], the frictional force on [tex]m_A.[/tex] Set this aside for now and let's look at the forces on [tex]m_B[/tex]

Forces on Block B:

Let the x-axis be (+) up along the inclined plane. We can write the forces on [tex]m_B[/tex] as

[tex]x:\:\:(F_{net})_x = T - m_B\sin30= -m_Ba\:\:\:\:\:\:\:(4)[/tex]

[tex]y:\:\:(F_{net})_y = N - m_Bg\cos30 = 0 \:\:\:\:\:\:\:\:\:(5)[/tex]

From (5), we can solve for N as

[tex]N = m_B\cos30 \:\:\:\:\:\:\:\:\:(6)[/tex]

Set (6) aside for now. We will use this expression later. From (3), we can see that the tension T is given by

[tex]T = m_A( \mu_kg + a)\:\:\:\:\:\:\:\:\:(7)[/tex]

Substituting (7) into (4) we get

[tex]m_A(\mu_kg + a) - m_Bg\sin 30 = -m_Ba[/tex]

Collecting similar terms together, we get

[tex](m_A + m_B)a = m_Bg\sin30 - \mu_km_Ag[/tex]

or

[tex]a = \left[ \dfrac{m_B\sin30 - \mu_km_A}{(m_A + m_B)} \right]g\:\:\:\:\:\:\:\:\:(8)[/tex]

Putting in the numbers, we find that [tex]a = 1.4\:\text{m/s}[/tex]. To find the tension T, put the value for the acceleration into (7) and we'll get [tex]T = 21.3\:\text{N}[/tex]. To find the force exerted by the inclined plane on block B, put the numbers into (6) and you'll get [tex]N = 50.9\:\text{N}[/tex]

Answer:

how to solve this problem ???????

The magnitude of the resultant force is 919.6 N and the value of angle θ is 36.87⁰.

The resultant of the two forces is determined by resolving the force into x and y component as shown below;

[tex]F_1_x + F_2x_x = F_R_x \ --- (1) \\\\F_1_y + F_2_y = F_R_y\ ---(2)[/tex]

where;

The value of Angle θ is determined from equation (1)

-500sinθ + 600sin(30) = 0

500sinθ = 600sin(30)

500sinθ = 300

sinθ = 3/5

θ = 36.87⁰

The resultant of the forces is determined using the second equation;

500cosθ + 600cos(30) = R

500 x cos(36.87) + 600 x cos(30) = R

919.6 N = R

Learn more about resultant forces here: https://brainly.com/question/25239010