(b) If 124n= 232 five, find n.

Consecutive terms in this sequence are separated by a constant c, so if the 4th term is 15, then the next terms would be

5th: 15 + c

6th: (15 + c) + c = 15 + 2c

7th: (15 + 2c) + c = 15 + 3c

and so on. More generally, since any given number in the sequence depends on the number that came before it, we can write the n-th term in terms of the 4th term,

n-th: 15 + (n - 4) c

Then the 9th term in the sequence is

15 + (9 - 4) c = 35

and solving for c gives

15 + 5c = 35   ==>   5c = 20   ==>   c = 4

Then the 15th term would be

15 + (15 - 4)×4 = 15 + 11×4 = 15 + 44 = 59

Answer:

Devaughn = 31, Sydney = 25

Step-by-step explanation:

(56-6)÷2= 25

So they would both be 25 if they were the same age but Devaughn is 6 years older so 25+6=31

ATQ

[tex]\\ \sf\longmapsto x+x+6=56[/tex]

[tex]\\ \sf\longmapsto 2x+6=56[/tex]

[tex]\\ \sf\longmapsto 2x=56-6[/tex]

[tex]\\ \sf\longmapsto 2x=50[/tex]

[tex]\\ \sf\longmapsto x=\dfrac{50}{2}[/tex]

[tex]\\ \sf\longmapsto x=25[/tex]

Leontief input output model (technology matrix) is an economic model that shows the quantitative relationship and sectorial interdependency in a national economy

The responses with  regards to the question are;

(i) The technology matrix for the economy is presented as follows;

[tex]\mathbf{ A} =\left[\begin{array}{ccc}Agric&&Textile\\0.4&&0.1\\&&\\0.1&&0.2\end{array}\right] \begin{array}{ccc}\mathbf{Per \ Unit}\\Agriculture\\\\Textile\end{array}\right][/tex]

(ii) The required gross production of each industry to meet the desired surplus are;

50 units of agriculture and 250 units of textile

The reason the above values are correct is as follows:

(i) The given parameters are;

The industries in the economy = Agricultural industry and textile industry

Units of agricultural input required per unit of agricultural output = 0.4

Units of textile input required per unit of agricultural output = 0.1

Units of agricultural input required per unit of textile output = 0.1

Units of textile input required per unit of textile output = 0.2

Let X represent agriculture, and let Y represent textile, we have;

[tex]Agric \ for \ agric = \dfrac{0.4 \ units \ of \ agriculture}{1\ unit \ of \ agric \ produced} \times X \ Agric \ produced= 0.4 \cdot X[/tex]

[tex]Agric \ for \ textile = \dfrac{0.1 \ units \ of \ agriculture}{1\ unit \ of \ textile \ produced} \times Y \ textile \ produced= 0.1 \cdot Y[/tex]

We also have;

Textile for agriculture = 0.1·X

Textile for textile = 0.2·Y

Therefore;

X = 0.4·X + 0.1·Y

Y = 0.1·X + 0.2·Y

Therefore;

The technology matrix for the economy is presented as follows;

[tex]\mathbf{Technology \ matrix, A} =\left[\begin{array}{ccc}Agric&&Textile\\0.4&&0.1\\&&\\0.1&&0.2\end{array}\right] \begin{array}{ccc}\mathbf{Per \ Unit}\\Agriculture\\\\Textile\end{array}\right][/tex]

(ii)  Let P represent the production vector, and let d represent the demand vector, we have;

[tex]P = \left[\begin{array}{c}X \\Y\end{array}\right][/tex], [tex]d = \left[\begin{array}{c}5 \\195\end{array}\right][/tex]

P = A·P + d

∴ P - A·P = d

Therefore;

[tex]P = \mathbf{ \dfrac{d}{(I - A)}}[/tex]

Where I = The 2 by 2 identity matrix

We get;

[tex]I - A =\left[\begin{array}{ccc}1&&0\\&&\\0&&1\end{array}\right] - \left[\begin{array}{ccc}0.4&&0.1\\&&\\0.1&&0.2\end{array}\right] = \mathbf{\left[\begin{array}{ccc}0.6&&-0.1\\&&\\-0.1&&0.8\end{array}\right]}[/tex]

With the use of a graphing calculator, we have;

[tex]P =\left[\begin{array}{c}X \\Y\end{array}\right] = \dfrac{\left[\begin{array}{c}5 \\195\end{array}\right]}{\left[\begin{array}{ccc}0.6&&-0.1\\&&\\-0.1&&0.8\end{array}\right]} = \left[\begin{array}{ccc}50\\\\\ 250\end{array}\right][/tex]

The required gross product of agriculture, X = 50 units

The required gross product of textile, Y = 250 units

Learn more about the Leontief input output model here:

https://brainly.com/question/15417573

We have that he technology matrix for this economy and the  the gross production of each industry are

a)    [tex]X= \begin{vmatrix}0.4 & 0.1 \\0.1 & 0.2\end{vmatrix}[/tex]

b)    [tex]\begin{vmatrix}A\\T\end{vmatrix}=\begin{vmatrix}50\\250\end{vmatrix}[/tex]          

From the Question we have told that

Each unit of agricultural output requires 0.4 unit of agricultural input

Each unit of agricultural output requires 0.1 unit of textiles input.

Each unit of textiles output requires 0.1 unit of agricultural input

Each unit of textiles output requires 0.2 unit of textiles input.

Generally the technology matrix for this economy is given below

With

X =Agricultural industry Gross output

Y= Textile industry Gross Output

Therefore

[tex]X= \begin{vmatrix}0.4 & 0.1 \\0.1 & 0.2\end{vmatrix}[/tex]

b)

From the Question we are told that

Surpluses of 5 units of agricultural products and 195 units of textiles are desired.

Therefore, we have Desired surplus matrix of

[tex]D= \begin{vmatrix}5\\195\end{vmatrix}[/tex]

Generally the Technology equation is mathematically given as

[tex](I-X)\phi=D[/tex]

Where

X =Agricultural industry Gross output

I=A Unit matrix

\phi=Matrix of gross production

Therefore

[tex]\begin{vmatrix}1 & 0\\0 & 1\end{vmatrix}-(\begin{vmatrix}0.4 & 0.1 \\0.1 & 0.2\end{vmatrix}))\begin{vmatrix}A\\T\end{vmatrix}=\begin{vmatrix}5\\195\end{vmatrix}[/tex]

[tex]\begin{vmatrix}A\\T\end{vmatrix}=\begin{vmatrix}50\\250\end{vmatrix}[/tex]

In conclusion

The technology matrix for this economy and the  the gross production of each industry are

[tex]X= \begin{vmatrix}0.4 & 0.1 \\0.1 & 0.2\end{vmatrix}[/tex]

[tex]\begin{vmatrix}A\\T\end{vmatrix}=\begin{vmatrix}50\\250\end{vmatrix}[/tex]         Respectively

In conclusion

https://brainly.com/question/16863924

Answer:

option A

Step-by-step explanation:

wx and zy making 90 angle with each other therefore they are perpendicular.

wx and ab making 0 angle with each other therefore they are parallel

Answer:

8.33 hours

Step-by-step explanation:

120-45 = 75

75 ÷ 9 = 8.33

Answer:

14.17 kilograms

Step-by-step explanation:

Find what quantity of tomatoes was in each batch by dividing the total amount of tomatoes by the number of batches:

99.19/7

= 14.17

So, the factory put 14.17 kilograms of tomatoes in each batch.

Answer:

Cluster Sampling

Step-by-step explanation:

Cluster Sampling involves the random sampling of observation or subjects, which are subsets of a population. Cluster analysis involves the initial division of population subjects into a number of groups called clusters . From the divided groups or clusters , a number of groups is then selected and it's elements sampled randomly. In the scenario above, the divison of the population into towns where each town is a cluster. Then, the selected clusters (12) which are randomly chosen are analysed.

Answer:

5(5x-3)

Step-by-step explanation:

The common factor in this expression is 5 so divide 5 to all the values

25/5=5

-15/5= -3

Put these values into parenthesis and leave the 5 on the left side and out of the parenthesis

5(5x-3)

Answer:

5(5x - 3)

Step-by-step explanation:

The greatest common factor here is 5. Divide each term by 5 and simplify.

25x/5 = 5x

15/5 = 3

Therefore, the answer is 5(5x - 3).

Answer:

The answer is 82.2  

Step-by-step explanation

hope this helps

Answer:

no

Step-by-step explanation:

if two numbers are co-prime that is not necessary that one of them must be a prime number

Answer:

Step-by-step explanation:

210=2x3x5x7

280=2x2x2x5x7

360=2x2x2x3x3x5

Answer:

210= 2×3×5×7

280=2×2×2×5×7

360=2×2×2×3×3×5

common factors=2×2×2×3×5×7=840

uncommon factors=3

L.C.M=Common factors× uncommon factors

L.C.M=840×3

L.C.M=2520

Step-by-step explanation:

i hope it will be helpful

plzz mark as brainliest

Answer:

Hello,

Answer : 1400 and 1575

Step-by-step explanation:

Let's say a and b the ywo numbers

[tex]HCF(a,b)=a\vee b=175=5^2*7\\LCM(a,b)=a\wedge b=12600\\\\a*b=(a\vee b)*(a\wedge b)=(2^3*3^2*5^2*7)*(5^2*7)=2^3*3^2*(5^2*7^2)^2\\\\Both\ numbers\ are\ greater\ than\ their HCF\\a=175*k_1\\b=175*k_2\\\\k_1=2^3\ and\ k_2=3^2\\\\a=175*2^3=1400\\b=175*3^2=1575\\\\[/tex]

[tex]\boxed{\underline{\bf \: Answer}}[/tex]

[tex] \sf100 \times 20 + 30[/tex]

First multiply 100 & 20 together.

[tex] \sf= 2000 + 30[/tex]

Now add 2000 & 30. You'll get :-

[tex]= \boxed{ \bf 2030}[/tex]

____

Hope it helps.

RainbowSalt2222

[tex]\\ \rm\longmapsto 100\times 20+30[/tex]

[tex]\\ \rm\longmapsto (100\times 20)+30[/tex]

[tex]\\ \rm\longmapsto 2000+30[/tex]

[tex]\\ \rm\longmapsto 2030[/tex]

Answer:

????

Step-by-step explanation:

as in y = 4.95 + 3.99 or points? if so just draw a horizontal line at 8.94

Answer:

(2,-1)

Step-by-step explanation:

Solved using math.

Answer:

The solution is (2, -1) to show this by graphing do y = -1 by making a straight horizontal line at (0,-1) . And then for the other equation make a line where it starts at (0,4) and passes point (2,-1). Just plot those two points and connect them and you'll have made the line.

Step-by-step explanation:

Answer:

18.84 feet.  let me know if you have ay other questions.

Step-by-step explanation:

The way to find the formula for circumference is kinda complicated so it is best to ust memorize the formula, which is 2πr.  or 2 times pi times the radius.  

Your problem gives you the formula, but instead of 2 and r in it you have d, which is the diameter.

The diameter of the circle is 2 times the radius, so that's why it is replaced.

the radius is the distance from the center fo the circle to one edge, and the diameter is the distance through the circle passing through its center.  so it's the center to one end plus the center to another end.  or r+r which is also 2r.

So d = 2r, so in this problem d =6 feet.

So now the formula πd = 3.14*6 feet = 18.84 feet

Answer:

0.0005m^3

Step-by-step explanation:

V=1/3hπr²

h=6m

d=12m

r=12÷2=6m

V=1/3×6×(3.14)×36

V=1/2034.72

V=0.0005m^3

Answer:

Step-by-step explanation:

Let's solve your inequality step-by-step.

y - 6 > 2y - 4

y - 2y > -4 + 6

-y > 2

now divide by -1 and inequality sign changes

-y/-1 < 2/-1

y < -2

Answer:

–81

Step-by-step explanation:

Answer:

$11.25

Step-by-step explanation:

Total money given to the taxi driver=36+25% of 36=45

Each person will pay (45/4)=11.25

Answer:

D. 3

Step-by-step explanation:

A triangle can be defined as a two-dimensional shape that comprises three (3) sides, three (3) vertices and three (3) angles.

Simply stated, any polygon with three (3) lengths of sides is a triangle.

In Geometry, a triangle is considered to be the most important shape.

Generally, there are three (3) main types of triangle based on the length of their sides and these include;

I. Equilateral triangle: it has all of its three (3) sides and interior angles equal.

II. Isosceles triangle: it has two (2) of its sides equal in length and two (2) equal angles.

III. Scalene triangle: it has all of its three (3) sides and interior angles different in length and size respectively.

In Geometry, an acute angle can be defined as any angle that has its size less than ninety (90) degrees.

Hence, we can deduce that the greatest number of acute angles that a triangle can contain is three (3) because the sum of all the interior angles of a triangle is 180 degrees.

Answer:

A)

[tex]k=0[/tex]

B)

[tex]\displaystyle \begin{aligned} 2k + 1& = 2\ln 20 + 1 \\ &\approx 2.3863\end{aligned}[/tex]

C)

[tex]\displaystyle \begin{aligned} k - 3&= \ln \frac{1}{2} - 3 \\ &\approx-3.6931 \end{aligned}[/tex]

Step-by-step explanation:

We are given the function:

[tex]\displaystyle h(x) = 20e^{kx} \text{ where } k \in \mathbb{R}[/tex]

A)

Given that h(1) = 20, we want to find k.

h(1) = 20 means that h(x) = 20 when x = 1. Substitute:

[tex]\displaystyle (20) = 20e^{k(1)}[/tex]

Simplify:

[tex]1= e^k[/tex]

Anything raised to zero (except for zero) is one. Therefore:

[tex]k=0[/tex]

B)

Given that h(1) = 40, we want to find 2k + 1.

Likewise, this means that h(x) = 40 when x = 1. Substitute:

[tex]\displaystyle (40) = 20e^{k(1)}[/tex]

Simplify:

[tex]\displaystyle 2 = e^{k}[/tex]

We can take the natural log of both sides:

[tex]\displaystyle \ln 2 = \underbrace{k\ln e}_{\ln a^b = b\ln a}[/tex]

By definition, ln(e) = 1. Hence:

[tex]\displaystyle k = \ln 2[/tex]

Therefore:

[tex]2k+1 = 2\ln 2+ 1 \approx 2.3863[/tex]

C)

Given that h(1) = 10, we want to find k - 3.

Again, this meas that h(x) = 10 when x = 1. Substitute:

[tex]\displaystyle (10) = 20e^{k(1)}[/tex]

Simplfy:

[tex]\displaystyle \frac{1}{2} = e^k[/tex]

Take the natural log of both sides:

[tex]\displaystyle \ln \frac{1}{2} = k\ln e[/tex]

Therefore:

[tex]\displaystyle k = \ln \frac{1}{2}[/tex]

Therefore:

[tex]\displaystyle k - 3 = \ln\frac{1}{2} - 3\approx-3.6931[/tex]

Answer:

The total number of branches = total possibilities = the denominator of a probability.

So the second choice is correct.

Let me know if this helps!

Answer:

Step-by-step explanation: answer B (the denominator of a probability)

We can seperate (3b³) into two different parts, the constant and the variable.

The constant (3) and the variable (b) can both be squared and multiplied to get the correct answer, so:

3² = 9

(b³)² = [tex]b^{6}[/tex]

So, [tex](3b^{3})^{2} = 9b^{6}[/tex]

Answer:

6'2

Step-by-step explanation:

Answer:

6000 hope this helps

if the question is 5,422 then the round figure is 5000

but the question is 5,821 its above 5500 will be 6000