balance the following equation by oxidation reduction method FeSO4
+
KMnO4+ H2SO4 → Fe2 (SO4)3+ k2SO4+MnSO4+H2O​

Answer:

hello your question is incomplete attached below is the complete question

answer :

we use Isomerization because conjugated allylic carbocation  is more stable when compared to a Non-conjugated Allylic carbocation

Explanation:

Reason for the mechanism

we use Isomerization because conjugated allylic carbocation  is more stable when compared to a Non-conjugated Allylic carbocation

attached below is the detailed mechanism

Answer:

An ionic bond is the electrostatic force that holds ions together when they form bonds

Explanation:

An ionic bond is formed when a metal looses electron(s) to a non metal leading to the formation of a positive ion and a negative ion.

An ionic compound is actually an ion pair, the ions are held together by strong electrostatic forces.

This strong electrostatic force that holds the ion pair together in ionic compounds is what we commonly call the IONIC BOND.  

Answer:

An ionic bond is the electrostatic force that holds ions together when they form bonds

Explanation:

I took this test and it was the correct answer :)

Answer:

2.9moles of hydrogen gas

Explanation:

convert liters to dm³

since 1liter= 1dm³

thus, 65.0liters = 65.0dm³

number of moles = volume given/22.4dm³

= 65.0/22.4

=2.9moles

Answer:

116.78 grams.

Explanation:

1 mol of Strontium (Sr) = 87.62 grams

1.38 mol of Strontium = x

Cross Multiply

1 * x = 1.38 * 87.62

x = 116.78  grams

The ocean is not a part of Earth's layers.

Answer:

Ocean

Explanation:

Answer:

Lead

Explanation:

The subatomic particles within an atom can be used to know the atom or element given.

Of particular interest is the number of protons within the atom.

The periodic table is based on the atomic number of atoms. This atomic number is the number of protons within an atomic space.

So; If we know the number of protons within an atom, we can know the element.

The number of protons given is 82, the element is  therefore lead.

Answer:

The atomic number of polonium is 84. The atomic number lead is 82.

Explanation:

Answer:

d. 9.95 × 10⁻³ mol

e. 249 g

f. 2.55 × 10²⁴ atoms

g. 4.32 × 10²² atoms

Explanation:

d. the number of moles of cobalt represented by 5.99 x 10²¹ cobalt atoms

We will use Avogadro's number: there are 6.02 × 10²³ atoms of cobalt in 1 mole of atoms of cobalt.

5.99 x 10²¹ atoms × 1 mol/6.02 × 10²³ atoms = 9.95 × 10⁻³ mol

e. the mass of 4.23 mol of cobalt

The molar mass of cobalt is 58.93 g/mol.

4.23 mol × 58.93 g/mol = 249 g

f. the number of cobalt atoms in 4.23 mol of cobalt

We will use Avogadro's number: there are 6.02 × 10²³ atoms of cobalt in 1 mole of atoms of cobalt.

4.23 mol × 6.02 × 10²³ atoms/1 mol = 2.55 × 10²⁴ atoms

g. the number of cobalt atoms in 4.23 g of cobalt

First, we will calculate the moles of cobalt using the molar mass of cobalt.

4.23 g × 1 mol/58.93 g = 0.0718 mol

Then, we will calculate the number of cobalt atoms using Avogadro's number.

0.0718 mol × 6.02 × 10²³ atoms/1 mol = 4.32 × 10²² atoms

Answer:

Molecules/State

Explanation:

We know from the kinetic molecular theory that matter is made up of molecules. These molecules are in constant motion at various velocities and energies.

The total thermal energy refers to the total kinetic energies of these particles. It depends on the temperature of the system, the energies of the molecules present in the material and the arrangement of the object's molecules (states of matter).

Answer:

Solution A: 0.00400M

Solution B: 0.00400M

Solution C: 4.00x10⁻⁵M

Explanation:

Solution A is diluting the 0.100M NaCl from 10mL to 250mL. That is:

250mL / 10mL = 25 times.

That means molar concentration of sln A is:

0.100M / 25 = 0.00400M

Solution B is obtained diluting 25mL to 100mL:

100mL / 25mL = 4 times

0.00400M / 4 times = 0.00100M

And solution C is obtained diluting the solution C from 20mL to 500mL:

500mL / 20mL = 25 times

Solution C:

0.00100M / 25 times = 4.00x10⁻⁵M

The formula for serial dilution can be used to obtain the molarity of solution A, B , C.

M1V1 = M2V2

M2 = 0.100 M ×  10 mL/250-mL

M2 = 0.004 M

M1V1 = M2V2

M2 = 0.004 M × 25 mL/100-mL

M2 = 0.001 M

M1V1 = M2V2

M2 = 0.001 M × 20 mL/500-mL

M2 = 0.00004 M

Learn more about serial dilution: https://brainly.com/question/2167827

Answer:

5.78 × 10¹⁴ Hz

Explanation:

Step 1: Given and required data

Step 2: Convert "λ" to meters

We will use the conversion factor 1 m = 10⁹ nm.

519. nm × 1 m/10⁹ nm = 5.19 × 10⁻⁷ m

Step 3: Calculate the frecquency of this light

We will use the following expression.

c = λ × ν

ν = c/λ

ν = (3.00 × 10⁸ m/s)/5.19 × 10⁻⁷ m

ν = 5.78 × 10¹⁴ s⁻¹ = 5.78 × 10¹⁴ Hz

Answer:

H-H equation is written as follows:

pH=pK + log

{HCO3-}(base)

{H2CO3}(acid)

Answer:

Explanation:

From the information given;

Consider using Lande's Interval rule which can be expressed as:

[tex]\Delta E = E_{j+1} - E_jj \ = \alpha (j+1)[/tex]

here;

[tex]j+1[/tex]  = highest level of j

and

[tex]\dfrac{\Delta E_1}{\Delta E_2} = \dfrac{(j+2)}{(j+1)}[/tex]

[tex]\dfrac{5}{3} = \dfrac{(j+2)}{(j+1)}[/tex]

[tex]5(j+1) = 3(j+2)[/tex]

[tex]5j+5 = 3j+6[/tex]

[tex]2j = 1\\ \\ j = \dfrac{1}{2}[/tex]

recall that:

[tex]j = |S-L| \ \to \ |S+L |[/tex]

So;

[tex]S-L = \dfrac{1}{2} --- (1)[/tex]; &

[tex]S+L = \dfrac{5}{2} --- (1)[/tex]

Using the elimination method, we have:

[tex]2S = \dfrac{6}{2}[/tex]

[tex]S = \dfrac{3}{2}[/tex]

Since [tex]S = \dfrac{3}{2}[/tex]; then from (1)

[tex]\dfrac{3}{2} -L = \dfrac{1}{2}[/tex]

[tex]L = \dfrac{2}{2}[/tex]

[tex]L = 1[/tex]

Answer:

0.57 water

Explanation:

To solve this problem, we need to write the reaction expression first.

The reactants are oxygen gas and hydrogen gas.

They react to give a product of water

       2H₂    +    O₂   →   2 H₂O  

Given that;

Number of moles of hydrogen gas = 0.57moles

From the balanced reaction expression;

       2 moles of hydrogen gas produces 2 moles of water

   So;

    0.57mole of hydrogen gas will also produce 0.57 water

Answer:

60.0mL of the diluted solution are needed

6.00mL of the 1.00M NaOH stock solution is the minimum volume needed to prepare the diluted solution.

Explanation:

As in each titration we need to use 20.0mL of the diluted 0.100M solution. As there are 3 titration, the volume must be:

3 * 20.0mL = 60.0mL of the diluted solution are needed

Now, to prepare a 0.100M NaOH solution from a 1.00M NaOH stock solution the dilution must be of:

1.00M / 0.100M = 10 times must be diluted the solution.

As we need at least 60.0mL, the minimum volume of the stock solution must be:

60.0mL / 10 times =

Answer:

25.8 g/dL

Explanation:

A chemist prepares a solution of aluminum sulfate by weighing out 116.0 g of aluminum sulfate into a 450. mL volumetric flask and filling the flask to the mark with water. Calculate the concentration in g/dL of the chemist's aluminum sulfate solution. Be sure your answer has the correct number of significant digits.

Step 1: Given data

Step 2: Convert "V" to dL

We will use the following conversion factors.

450. mL × 1 L/1000 mL × 10 dL/1 L = 4.50 dL

Step 3: Calculate the concentration (C) of aluminum sulfate if g/dL

We will use the following expression.

C = m/V = 116.0 g/4.50 dL = 25.8 g/dL

Answer:

The cycling of matter is important to many Earth processes and to the survival of organisms the existing matter must cycle continuously for this planet to support life Water, carbon, nitrogen, phosphorus, and even rocks move through cycles If these materials did not cycle, Earth could not support life.

Explanation:

Earth activities depend on matter cycling, and for organisms to survive, this planet's surface must cycle with the flow of matter.

Rocks, as well as water, carbon, nitrogen, and phosphorus, go through cycles. The planet Earth could not support life if these materials did not cycle.

Subsystems exist within the Earth system. These subsystems include the exosphere, atmosphere, hydrosphere, lithosphere and geosphere, also referred to as the lithosphere, and the living environment (biosphere).

These systems are powered by energy that comes from both the Sun and the interior of the Earth. Through processes known as biogeochemical cycles, nutrients and elements also move through these systems along with energy.

Therefore,  Earth activities depend on matter cycling, and for organisms to survive, this planet's surface must cycle with the flow of matter.

To learn more about Earth, refer to the link:

https://brainly.com/question/1204146

#SPJ6

Answer:

0.229 cm³.

Explanation:

The following data were obtained from the question:

Volume (in in³) = 0.014 in³

Volume (in cm³) =?

1 in = 2.54 cm

Next, we shall determine a conversion scale to convert from in³ to cm³. This can be obtained as follow:

1 in = 2.54 cm

Therefore,

1 in³ = 2.54³ cm³

1 in³ = 16.387 cm³

Finally, we shall convert 0.014 in³ to cm³. This can be obtained as follow:

1 in³ = 16.387 cm³

Therefore,

0.014 in³ = 0.014 in³ × 16.387 cm³ / 1 in³

0.014 in³ = 0.229 cm³

Thus, 0.014 in³ is equivalent to 0.229 cm³.

Answer:

1.17 M

Explanation:

Step 1: Write the balanced equation

N₂ + 3 H₂ ⇒ 2 NH₃

Step 2: Calculate the rate of disappearance of H₂

We will use the following expression.

rH₂ = - Δ[H₂]/t = - (0.25 M - 0.50 M)/44 s = 0.0057 M/s

Step 3: Calculate the rate of disappearance of N₂

The molar ratio of N₂ to H₂ is 1:3.

0.0057 mol H₂/L.s × 1 mol N₂/3 mol H₂ = 0.0019 mol N₂/L.s

Step 4: Calculate the final concentration of N₂

We will use the following expression.

[N₂] = [N₂]₀ - rN₂ × t

[N₂] = 1.25 mol/L - 0.0019 mol/L.s × 44 s

[N₂] = 1.17 M

Answer:

movement of charged particles through the wire .

Explanation:

When electricity is passed through the wire of electromagnet , moving electrons of the wire produces magnetic field . This magnetic field in increased due to high permeability of soft iron of the electromagnet . It is this magnetic field which creates magnetic force .

The  uncertainties  of  the  delta  measurements  and  the  uncertainty  of  the  atomic  weight  derivedfrom  the  best  measurement  of  isotopic  abundances  constrain  the  number  of  significant  figures  in  theatomic-weight values of the upper and lower bounds. For carbon, the fifth digit after the decimal pointis uncertain because of the uncertainty value of 0.000 027. Therefore, the number of significant digitsin the atomic-weight value is reduced to four figures after the decimal point. The Commission may rec-ommend  additional  conservatism  and  reduce  the  number  of  significant  figures  further.  For  the  lowerbound of carbon, 12.009 635 is truncated to 12.0096. For an upper bound, the trailing digit is increasedto ensure the atomic-weight interval encompasses the atomic-weight values of all normal materials. Inthe case of carbon, the upper bound is adjusted from 12.011 532 to 12.0116 to express four digits afterthe decimal point. The lower and upper bounds are evaluated so that the number of significant digits ineach  is  identical.  If  a  value  ends  with  a  zero,  it  may  need  to  be  included  in  the  value  to  express  therequired number of digits. The following are examples of lower and upper atomic-weight bounds foroxygen that could be published by the Commission in its various tables.

---------------------------

Extracted from" Atomic weights of the elements 2009 (IUPAC Technical Report)"

Answer:

c

Explanation:

ok than not c than b maybe

Answer:

0.696 atoms of oxygen

Explanation:

We'll begin by calculating the number of mole in 50 g of scheelite CaWO₄. This can be obtained as follow:

Mass of CaWO₄ = 50 g

Molar mass of CaWO₄ = 40 + 184 + (4×16)

= 40 + 184 + 64

= 288 g/mol

Mole of CaWO₄ =?

Mole = mass / Molar mass

Mole of CaWO₄ = 50 / 288

Mole of CaWO₄ = 0.174 mole

Finally, we shall determine the number of oxygen atom in 50 g (i.e 0.174 mole) of CaWO₄. This can be obtained as follow:

1 mole of CaWO₄ contains 4 atoms of oxygen.

Therefore, 0.174 mole of CaWO₄ will contain = 0.696 atoms of oxygen.

Thus, 50 g (i.e 0.174 mole) of CaWO₄ contains 0.696 atoms of oxygen.

Answer:

Liquid

Explanation:

Answer:

th relative ability of a solute to devolve into a solvent

Answer:

Q =  57934.8 J

Explanation:

Given data:

Mass of water = 180.0 g

Initial temperature = 19°C

Fina temperature = 96°C

Specific heat capacity of water = 4.18 J/g.°C

Heat absorbed = ?

Solution:

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT = 96°C - 19°C

ΔT = 77°C

Q = 180.0 g×4.18 J/g.°C×77°C

Q =  57934.8 J

Answer: 7.77 g/ml

Explanation:

Volume of cylinder with only water = 3.28 mL

Volume of cylinder with water and metal = 8.72 mL

Volume of metal = (Volume of cylinder with water and metal ) -(Volume of cylinder with only water)

=8.72-3.28

=5.44 ml

Mass of metal = 42.26 g

Formula of Density =  [tex]\dfrac{\text{Mass}}{\text{Volume}}[/tex]

i.e. the density of the metal = [tex]\dfrac{42.26}{5.44}\approx7.77\text{ g/ml}[/tex]

Hence, the density of metal = 7.77 g/ml

Answer:

B

Explanation:

Answer:

No

Explanation:

This does not mean that vinegar is insoluble totally. In fact, vinegar is soluble in water because water is a polar solvent.

For a substance to be soluble in another, it must obey the rule of solubility.

The rule states that "like dissolves like"

It implies that polar solvent will only dissolve polar solute.

Also, non-polar solvent will only dissolve non-polar solute.

Therefore, the answer is no, vinegar will dissolve in water.