Answer:
a. Serine is converted to pyruvate. It is glucogenic.
b. Aspartate is converted citric acid cycle intermediates. It is glucogenic.
c. Leucine is converted to AcetylCoA. It is ketogenic.
Explanation:
The degradation of amino acids usually account for a significant amount of energy production by the human body. The carbon skeletons of amino acids after deamination are either channelled to gluconeogenesis, ketogenesis or are completely oxidized to carbon dioxide and water.
The amino acids that are channelled to gluconeogenesis are said to be glucogenic. The glucogenic amino acids are those that are either degraded to ∝-ketoglutarate, succinylCoA, fumarate or oxaloacetate which are citric acid cycle intermediates that can be converted to glucose and glycogen. Also, amino acids that are degraded to pyruvate are glucogenic as pyruvate can be converted to glucose via oxaloacetate. Examples of these amino acids are serine which is converted to pyruvate and aspartate which is converted to the citric acid cycle intermediate, oxaloacetate.
On the other hand, amino acids that are channelled to ketogenesis are said to be ketogenic. The ketogenic amino acids are degraded to either acetylCoA or acetoacetylCoA. AcetylCoA and acetoacetylCoA are used in the formation of key one bodies. An example of a ketogenic amino acid is leucine which is converted both to AcetylCoA and acetoacetylCoA.
Which of the following is considered a standard unit of length in the United States?
O square inch
O acre
O cubic yard
O yard
Answer:
Yard . I hope this helped:))
A barium hydroxide solution is prepared by dissolving 2.29 g of Ba(OH)2 in water to make 46.6 mL of solution. What is the concentration of the solution in units of molarity?
Concentration: 0.287 M
The barium hydroxide solution is used to titrate a perchloric acid solution of unknown concentration. Write a balanced chemical equation to represent the reaction between barium hydroxide and perchloric acid.
Chemical Equation:
If 25.5 mL of the barium hydroxide solution was needed to neutralize a 8.99 mL aliquot of the perchloric acid solution, what is the concentration of the acid?
Concentration:
Answer:
0.287 M
Ba(OH)₂ + 2 HClO₄ ⇒ Ba(ClO₄)₂ + 2 H₂O
1.62 M
Explanation:
Step 1: Calculate the concentration of Ba(OH)₂
We will use the following expression.
[Ba(OH)₂] = mass Ba(OH)₂/ molar mass Ba(OH)₂ × liters of solution
[Ba(OH)₂] = 2.29 g/ 171.34 g/mol × 0.0466 L = 0.287 M
Step 2: Write the balanced neutralization equation
Ba(OH)₂ + 2 HClO₄ ⇒ Ba(ClO₄)₂ + 2 H₂O
Step 3: Calculate the reacting moles of Ba(OH)₂
25.5 mL of 0.287 M Ba(OH)₂ react.
0.0255 L × 0.287 mol/L = 7.32 × 10⁻³ mol
Step 4: Calculate the reacting moles of HClO₄
7.32 × 10⁻³ mol Ba(OH)₂ 2 mol HClO₄/1 mol Ba(OH)₂ = 0.0146 mol HClO₄
Step 5: Calculate the concentration of HClO₄
0.0146 moles of HClO₄ are in 8.99 mL of solution.
[HClO₄] = 0.0146 mol/0.00899 L = 1.62 M
Which equation represents a combustion reaction?
2SO2 + O2 → 2SO3
Pb(NO3)2 + 2HCl → PbCl2 + 2HNO3
2C2H6 + 7O2 → 4CO2 + 6H2O
Ca + 2HCl → CaCl2 + H2
Answer:
2SO2 + O2 => 2SO3
Explanation:
Combustion reaction involves heating of a compound/element/substance in presences of oxygen.
which effect of long-term environmental change is the driving force behind evolution?
Answer:
climate change
Explanation:
climate change is driving force of evolution because when the climate is changed the animal and human need to adapt to it's natural change.
Soda contains phosphoric acid (H3PO4). To determine the concentration of phosphoric acid in 50.0 mL of soda, the available phosphate ions are precipitated with excess silver nitrate as silver phosphate (418.58 g/mol). The dry Ag3PO4 is found to have a mass of 0.0576 g. What is the concentration of phosphoric acid in the soda?
Answer:
0.0270w/v% H3PO4 in the soda
Explanation:
All phosphates reacts producing Ag3PO4. To solve this question we must convert the mass of Ag3PO4 to moles. These moles = moles of H3PO4. We can find, thus, the mass of H3PO4 and the w/v% as follows:
Moles Ag3PO4 -Molar mass: 418.58g/mol-
0.0576g * (1mol / 418.58g) = 1.376x10⁻⁴ moles Ag3PO4 = moles H3PO4
Mass H3PO4 -Molar mass: 97.994g/mol-
1.376x10⁻⁴ moles Ag3PO4 = moles H3PO4 * (97.994g/mol) = 0.0135g H3PO4
w/v%:
0.0135g H3PO4 / 50.0mL * 100 =
0.0270w/v% H3PO4 in the sodaWater is considered to be a diatomic molecule because it composed of two different atoms. True or false?
Answer:
false
Explanation:
False, water is a polyatomic molecule made up of two atoms of oxygen and 1 atom of hydrogen.
Explanation:
The monoatomic molecule is composed of a single atom of an element.For example: Helium(He) , argon(Ar) etc.The diatomic molecule is composed of two atoms of the same or different elements.For example: hydrochloric acid (HCl), sodium chloride (NaCl) etc.The polyatomic molecule is composed of three or more than three atoms of the same or different elements.For example: water ([tex]H_2O[/tex]), sodium hydroxide(NaOH) etc.So, from this, we can conclude that water is a polyatomic molecule made up of two atoms of oxygen and 1 atom of hydrogen.
Learn more about types of molecules here:
brainly.com/question/3213630?referrer=searchResults
brainly.com/question/4979095?referrer=searchResults
Which of the following can be mixed in solution with NH3 to make a buffer?
Answer:
c. NaOH
Explanation:
just took the quiz
what would be the mass of 44.8 L of CO2 gas at STP?
show work if possible
Answer:
[tex]m=88.02g[/tex]
Explanation:
Hello there!
In this case, for this ideal gas law problem, it turns out necessary for us to remember that one mole of any gas is contained in 22.4 L at STP and therefore, we can use the following ratio to calculate the moles in 44.8 L of CO2:
[tex]\frac{1mol}{22.4L} =\frac{x}{44.8L}\\\\x= \frac{1mol*44.8L}{22.4L}=2mol[/tex]
Finally, since the molar mass of CO2 is 44.01 g/mol, we calculate the mass as follows:
[tex]m=2mol*\frac{44.01g}{1mol}\\\\m=88.02g[/tex]
Regards!
Hydrogen and chlorine gases react to form HCl. You and a friend are on opposite sides of a long hallway, you with H2 and your friend with Cl2. You both want to form HCl in the middle of the room. Which of the following is true?
a) You should release the H2 first.
b) Your friend should release the Cl2 first.
c) You both should release the gases at the same time.
d) You need to know the length of the room to answer this question.
e) You need to know the temperature to answer this question.
Answer: It is true that Your friend should release the [tex]Cl_{2}[/tex] first.
Explanation:
The velocity of particles of a gas is inversely proportional to the mass of gas. This means that more is the mass of gas less will be its velocity.
Or, more will be the mass of gas more slowly it will move from one place to another.
The molar mass of chlorine gas is more than the molar mass of hydrogen gas. Therefore, chlorine gas will move slowly.
So, your friend should release the [tex]Cl_{2}[/tex] gas first and then according to the length of room you should release the [tex]H_{2}[/tex] gas.
Thus, we can conclude that it is true that Your friend should release the [tex]Cl_{2}[/tex] first.
Unknown A melts at 113- 114oC. Known compounds 3-Nitroaniline and 4-Nitrophenol both melt at 112-114 oC. If A is mixed with 3-Nitroaniline and the melting point becomes broad and depressed, what must A be __________A) 3-Nitroaniline B) 4-Nitrophenol C) Both
Answer:
C) Both
Explanation:
Whenever we mix any pure form of a compound with some other form of a compound which is not in the other standard pure state, this results in the melting point of mixture to get dispersed and it becomes broad form.
Thus, when a known compound of 3-Nitroaniline mixes with both 3-Nitroaniline and 4-Nitrophenol, the melting point of the compound becomes depressed and board.
Thus the correct option is (C).
Rank the following alkenes in order of increasing stability of the double bond towards addition of HBr:
2,3-dimethyl-2-butene, cis-3-hexene, 3-methyl-3-hexene, 1-hexene
Answer:
2,3-dimethyl-2-butene > 3-methyl-3-hexene > cis-3-hexene > 1-hexene
Explanation:
According to Saytzeff rule, the more highly substituted an alkene is, the more stable it is. Since this is so, 2,3-dimethyl-2-butene will be the most stable of all the alkenes listed because it is the most substituted alkene.
Let us also note that terminal alkenes are the least stable because the pi bonds of the alkenes are least stabilized by alkyl groups. This implies that 1-hexene is the least stable alkene among the listed alkenes.
a weak acid undergoes _ ionization in water
Answer:
Partial
Explanation:
A strong acid will completely ionize in water while a weak acid will only partially ionize.
A coffee cup has a heat capacity of 62.6 - If the coffee cup's temperature increases by 1.20°C, how much heat has it
absorbed?
Select the correct answer below:
?
Answer:
75.12 J
Explanation:
Applying,
Q = CΔT................ equation 1
Where Q = amount of heat, C = Heat capacity, ΔT = temperature rise.
From the question,
Given: C = 62.6 J/K, ΔT = 1.20°C
Substitute these values into equation 1
Q = 62.6(1.20)
Q = 75.12 J
Hence the amount of heat it absorbed is 75.12 J
(Ch3ch2)2choh oxidize with k2cr2o7?
The hydrogen fluoride molecule, HF, is more polar than a water molecule, H2O (for example, has a greater dipole moment), yet the molar enthalpy of vaporization for liquid hydrogen fluoride is lesser than that for water. Explain.
Answer:
Water forms more hydrogen bonds than HF
Explanation:
The answer to this question goes back to the idea of hydrogen bonding. Hydrogen bonding occurs when hydrogen is bonded to a highly electronegative atom such as fluorine or oxygen.
However, in HF, there are three lone pairs of electrons on fluorine atom and one hydrogen atom bonded to fluorine.
In H2O, there are two lone pairs of electrons on oxygen atom and two hydrogen atoms bonded to oxygen. This simply means that water can form four hydrogen bonds while HF only forms two hydrogen bonds.
This implies that H2O molecules possess more hydrogen bonding than HF molecules. Hence, the molar enthalpy of vaporization for liquid hydrogen fluoride is lesser than that for water.
A certain first-order reaction is 27.5 percent complete in 8.90 min at 25°C. What is its rate constant?
Answer:
[tex]k= 0.145min^{-1}[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out necessary for us remember that the first-order kinetics is given by:
[tex]ln(A/A_0)=-kt[/tex]
Whereas the 27.5% complete means A/Ao=0.275, and thus, we solve for the rate constant as follows:
[tex]k=\frac{ln(A/A_0)}{-t}[/tex]
Then, we plug in the variables to obtain:
[tex]k=\frac{ln(0.275)}{-8.90min}\\\\k= 0.145min^{-1}[/tex]
Regards!
When taking a measurement with a pH meter, keep the instrument in the ______________ until it is needed. Rinse the pH meter with ______________ and gently pat dry. Place the meter in the sample solution, and record the measurement when the pH __________
Answer:
Storage solution; deionized water; stabilizes.
Explanation:
The pH scale measures the concentration of hydrogen ions in acidic and alkaline solutions.
In chemistry, it literally means power of hydrogen ions and it is a measure of the molar concentration of hydrogen ions in a particular solution, thus specifying the acidity, neutrality or basicity of chemical solutions.
Mathematically, the pH of a solution is given by;
[tex] pH = -log_{10}(H^{+}) [/tex]
Hence, a solution with a pH of 7 is neutral. Also, a solution with a pH below 7 is acidic but basic (alkaline) if it's pH is above 7.
A pH meter can be defined as a scientific instrument or device designed and developed for the measurement of the hydrogen-ion concentration in water-based solutions, in order to determine their level of acidity or alkanility.
When using a pH meter to take a measurement, you should keep it in a storage solution until it is needed. Also, a deionized water should be used to rinse the pH meter and gently pat dry.
Furthermore, the pH meter should be placed in a given sample solution and a reading of the measurement taken when the pH of the solution stabilizes.
g The boiling of water is a Question 4 options: chemical and physical damage chemical change because a gas (steam) is given off chemical change because heat is needed for the process to occur physical change because the water merely disappears physical change because the gaseous water is chemically the same as the liquid
Answer:
physical change because the gaseous water is chemically the same as the liquid
Explanation:
Matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.
Generally, matter exists in three (3) distinct or classical phases and these are; solid, liquid and gas.
A physical change can be defined as a type of change that only affects the physical form of a chemical substance (matter) without having any effect on its chemical properties. Thus, a physical change would only affect the physical appearance and properties of a chemical substance (matter) but not its chemical properties.
This ultimately implies that, a physical change result in a change of matter from one form or phase (liquid, solid or gas) to another without a corresponding change in chemical composition.
Hence, the boiling of water is considered to be a physical change because the gaseous water is chemically the same as the liquid i.e there isn't any changes in chemical composition of water when boiling.
Which is a general chemical equation for an exothermic, single-replacement reaction?
A.
AB + CD + energy → AD + CB
B.
AB + C → A + CB + energy
C.
AB + CD → AD + CB + energy
D.
AB + C + energy → A + CB
Answer:
c
Explanation:
it is because the chemical reaction will have the exposure to all the minerals with Microsoft word
Which statement shows why mass is conserved for this reaction? 2Mg + O2 → 2MgO
Answer:
The same number of each atom are on both sides of the equation.
The Law of conservation of mass states that matter is neither destroyed nor created in a chemical reaction. Therefore, the mass of the reactants will be equal to the mass of the products in a chemical reaction. According to the law matter is neither created nor destroyed in a chemical reaction.
Which of the following equations is not balanced?
A.
C5H12(1)
+
802(8)
5CO2(8)
+ 6H2O(g)
B.
H3PO4(aq)
+ 3NaOH(aq)
Na3PO4(aq) + 3H20(1)
C.
PC15(8)
+ 3H2O(g)
H3PO46
+ 5HCl(aq)
D.
Pb(NO3)2(aq)
+ 2HCl(aq)
PbCl2(s)
+ 2HNO3(aq)
Answer:
The answer is C.
Explanation:
In the chemical equation in C, there are 15 Carbon atoms and 1 Phosphorus atom in PC15, and 3 Hydrogen atoms and 6 Oxygen atoms in 3H2O on the left hand side. On the right hand side, there are 3 Hydrogen atoms, 1 Phosphorus atom and 46 Oxygen atoms in H3PO46, and 5 Hydrogen atoms and 5 Chlorine atoms in 5HCl.
Therefore, tallying up, there are 6 Oxygen atoms on the left hand side and 46 Oxygen atoms on the right hand side. This means the chemical equation in C is unbalanced.
Hope this helped!
The molecular formula of water is H, O. What does it express
Answer:
Firstly, the molecular formula of water would be H2O. Secondly, it expresses the amount of different atoms in the water molecule. In this case, H2 would be two Hydrogen atoms, and O would be 1 Oxygen atom.
Explanation:
Hope this helped!
Answer:
It basically means that water contains 2 atoms of Hydrogen and 1 atom of Oxygen.
It also expresses that the valency of Oxygen is 2 and water has more Hydrogen than OxygenGive the ground-state electron configuration for each of the following elements. After each atom is its atomic number in parentheses. (a) Potassium (19) (b) Neon (10)How many electrons are in the valence shell of each atom ? (a) Visited um (AI) (b) Oxygen (O) (c) Fluorine (F)
Answer:
(a) ₁₉K: 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹
(b) ₁₀Ne: 1s² 2s² 2p⁶
---
(a) 3
(b) 6
(c) 7
Explanation:
We can state the ground-state electron configuration for each element following Aufbau's principle.
(a) ₁₉K: 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹
(b) ₁₀Ne: 1s² 2s² 2p⁶
Second part
(a) Al belongs to Group 13 in the Periodic Table. It has 13-10=3 electrons in the valence shell.
(b) O belongs to Group 16 in the Periodic Table. It has 16-10=6 electrons in the valence shell.
(c) F belongs to Group 17 in the Periodic Table. It has 17-10=7 electrons in the valence shell.
Smart people
Is water wet?
I need to know
Answer:
Explanation:
"Wet" is not a scientific description - it means something that contains water. As water cannot contain water, water is not wet.
Answer:
Explanation:
water is not wet cuz' water make other things wet
There are four different starting molecules that one might use to synthesize the illustrated alkyl halide as the major product using an electrophilic addition reaction. Please draw all four of them.
Answer:
Explanation:
An electrophilic addition reaction occurs when an electrophile attacks a substrate, with the end result being the inclusion of one or many comparatively straightforward molecules along with multiple bonds.
In the given question, the hydrogen bromide provides the electrophile while the bromide is the nucleophile. The mechanism proceeds with the attack of the electrophile on the carbon, followed by deprotonation. This process is continued with a formation of carbocation and the bromide(nucleophile) finally bonds to the carbocation to form a stable product.
The first diagram showcases the possible various starting molecules for the synthesis while the second diagram illustrates their mechanism.
5. A sample of benzene (C6H6), weighing 7.05 g underwent combustion in a bomb calorimeter by the following reaction:
2 C6H6 (l) + 15 O2 (g) → 12 CO2 (g) + 6 H2O (l)
The heat given off was absorbed by 500 g of water and caused the temperature of the water and the calorimeter to rise from 25.00 to 53.13 oC. The heat capacity of water = 4.18 J/g/oC and the heat capacity of the calorimeter = 10.5 kJ/oC. (1) what is the ΔH of the reaction? Using the definitions at the beginning of the module describe (2) the calorimeter + contents, (3) the type of process.
Answer:
A sample of benzene (C6H6), weighing 7.05 g underwent combustion in a bomb calorimeter by the following reaction:
2 C6H6 (l) + 15 O2 (g) → 12 CO2 (g) + 6 H2O (l)
The heat given off was absorbed by 500 g of water and caused the temperature of the water and the calorimeter to rise from 25.00 to 53.13 oC. The heat capacity of water = 4.18 J/g/oC and the heat capacity of the calorimeter = 10.5 kJ/oC. (1) what is the ΔH of the reaction?
Explanation:
The heat energy released by the reaction = heat absorbed by calorimeter + heat absorbed by water
Heat absorbed by water = mass of water x specific heat capacity of water x change in temperature
Heat absorbed by water = 500 g x 4.18 J/g. oC x (53.13-25.00)oC
= 58791.7 J
Heat absorbed by calorimeter = heat capacity of calorimeter x change in temperature
Heat absorbed by calorimeter = 10.5 x 10^3 J /oC x (53.13-25.00)oC
=295365 J
Total heat energy absorbed = 58791.7 J + 295365 J = 354156.7 J
Number of moles of benzene given is:
number of moles = goven mass of benzene /its molar mass
=7.05 g / 78.0 g/mol
=0.0903mol
Hence, the heat released by the reaction is:
= 354156.7 J / 0.0903 mol
= 3922.00 kJ/mol
Answer:
The heat released during the combustion of 7.05g of benzene is 3922.00kJ/mol.
How many moles of CO2 form when 4.0 mol of ethane, C2H6, react?
2C2H6 + 702 + 4CO2 + 6H20
A. 8 mol
B. 2 mol
C. 6 mol
D. 4 mol
Answer:
The amswer would be A due to the ratio between ethane and carbon dioxide being 1:2. Due to this, you double the moles that are reacting
Please help meeee?!!!!
Explanation:
A structure in which valence electrons are depicted by dots is called a lewis structure.
For example, atomic number of oxygen is 8 and its electronic distribution is 2, 6.
Hence, the electron dot structure for [tex]O_{3}[/tex] molecule is as depicted in the picture attached.
describe how lyophobic sols are synthesize by dispersion method
Explanation:
For preparing lyophobic sol, the substance in bulk is broken down into particles of colloidal dimensions (Dispersion) or aggregating smaller particles into particles of colloidal dimensions (condensation).
If you keep adding sugar to water and there comes a point that you cannot dissolve any more sugar to it then this is called
Answer:
.
Explanation:
