Bonus question: Your pendulum can be used to calculate acceleration due to gravity (g). Measure the length of the pendulum (L) in meters and use your average period (T) to calculate acceleration due to gravity on Earth.

The mass of 7.60 × 10²⁰ hydrogen peroxide molecules is 0.043 grams.

The mass of a substance can be calculated by multiplying the number of moles by the molar mass of the substance as follows:

mass = molar mass × no of moles

However, the number of moles of a substance can be calculated by dividing the number of molecules of a substance by Avogadro's number;

no of moles = 7.60 × 10²⁰ ÷ 6.02 × 10²³

no of moles = 1.26 × 10-³ moles

molar mass of hydrogen peroxide = 34g/mol

mass = 34g/mol × 0.00126 moles

mass = 0.043 grams

Therefore, 0.043 grams is the mass of the hydrogen peroxide.

Learn more about mass at: https://brainly.com/question/16386473

#SPJ1

Aufbau's principle states that an electron in an atom is filled according to the energy of orbitals, orbital with minimum energy is first filled, and so on.

so the order of filling of electrons in orbitals are 1s 2s 2p 3s 3p 4s 3d 4p 5s 4d 5p 6s 4f 5d 6p 7s 5f 6d 7p 8s.

so, the 4f subshell is filled after the complete filling of electrons in 6s.

know more about "Aufbau's principle" here:

brainly.com/question/15006708

The periodic properties of elements are directly related to the energy levels of the atoms of the elements.

The correct option is C.

The periodicity of elements in the periodic table is the regular variation of the properties of the elements in the periodic table both down the group and across the periodic.

The properties of elements that show periodicity include;

Learn more about the periodicity of elements at: https://brainly.com/question/15987580

#SPJ1

Sodium chloride is produced and used in the production of polyester, paper, rubber, glass, chlorine, household bleach, soaps, detergents, and dyes.

Chemically speaking, salt is a combination of chloride and sodium. Actually, the element that is most harmful to your health is sodium. (Therefore, the chloride is what gives food its "salty" flavor.).

To replace salt and water that have been lost from your body as a result of specific conditions, sodium chloride 23.4% injection is employed (eg, hyponatremia or low salt syndrome). Additionally, it is added to IV fluids that contain carbohydrates and parenteral nutrition total (TPN).

To know more about sodium chloride visit:

https://brainly.com/question/9811771

#SPJ1

Methyl esters are created when carboxylic acids and diazomethane interact. Diazomethane is used to create methyl esters and has a high degree of reactivity.

Diazomethane reacts swiftly and extremely effectively, producing just N2 as a byproduct, making it an appealing alkylating agent for carboxylic and phenols (Black, 1983). As it responds, its inherent yellow color releases, automatically indicating the status of the reaction. Methyl esters are created when carboxylic acids and diazomethane interact. Diazomethane is created in-situ and then interacted with the carboxyl group right away to create the methyl ester due to its high reactivity. Diazomethane has mostly been used to transform carboxylic acids into esters (diazoalkales) that may be examined using GC/MS or HPLC-MS. In etherate solutions, methyl esters can be produced at room temperature quickly, thoroughly, and quantitatively.

Learn more about acids

https://brainly.com/question/29426933

#SPJ4

The volume of 0.162 mna3po4 solution is necessary to completely react with 91.4 ml of 0.104 m cacl2 is  0.137 L

To determine the volume of 0.162 M Na3PO4 solution that is necessary to completely react with 91.4 mL of 0.104 M CaCl2, you can use the concept of stoichiometry..

The chemical reaction between Na3PO4 and CaCl2 can be represented by the following balanced chemical equation:

3 Na3PO4 + 2 CaCl2 -> Ca3(PO4)2 + 6 NaCl

First, you need to convert the volumes of the solutions to moles using the molarities and the volume/molarity formula:

moles Na3PO4 = (0.162 M) * (91.4 mL / 1000 mL/L) = 0.0150 moles

moles CaCl2 = (0.104 M) * (91.4 mL / 1000 mL/L) = 0.0095 moles

Next, use the molar ratios in the balanced chemical equation to determine the volume of Na3PO4 solution that is necessary to react with 0.0095 moles of CaCl2:

(Volume Na3PO4 / 3) = (Volume CaCl2 / 2)

Solving for the volume of Na3PO4, you get:

Volume Na3PO4 = (3 / 2) * (Volume CaCl2)

Plugging in the values, you get:

Volume Na3PO4 = (3 / 2) * (91.4 mL / 1000 mL/L)

Solving, you get:

Volume Na3PO4 = 0.137 L

Therefore, the volume of 0.162 M Na3PO4 solution that is necessary to completely react with 91.4 mL of 0.104 M CaCl2 is approximately 0.137 L.

To know more about  volume  visit :https://brainly.com/question/24189159

#SPJ4

The reaction that can light the thermite is the combination of methane and oxygen. Option C

There is an ignition reaction when we burn a substance in another substance. Now, we know that an exothermic reaction refers to the kind of reaction hat is able to produce heat.

Since the exothermic reaction can be able to produce heat, this is the reaction that we can use to light the reaction between the magnesium and the oxygen so that we can be able to light the thermite.

Learn more about ignition reaction:https://brainly.com/question/2649564

#SPJ1

An analytical chemist has determined by measurements that there are moles of carbon in a sample of acetic acid. 0.11  many moles of oxygen are in the sample.

What is acetic acid?

Acetic acid is also known as ethanoic acid, ethylic acid, vinegar acid, and methane carboxylic acid; it has the chemical formula of CH3COOH.

Acetic acid is a byproduct of fermentation, and gives vinegar its characteristic odor. Vinegar is about 4-6% acetic acid in water.This is the chemical formula for acetic acid (the chemical that gives the sharp taste to vinegar): CH₃CO₂H.

An analytical chemist has determined by measurements that there are 0.054 moles of oxygen in a sample of acetic acid. moles of hydrogen are in the sampleStep 1: Formula of acetic acid: CH₃CO₂HMoles of oxygen in the sample of acetic acid: 0.054 moles

Step 2: Establish the appropriate molar ratio According to the chemical formula of acetic acid, the molar ratio of H to O is 4:2.

Step 3: Calculate the moles of atoms of hydrogenWe will use the theoretical molar ratio for acetic acid.0.054 mol O × (4 mol H/2 mol O) = 0.11 mol H

To learn more about acetic acid visit:https://brainly.com/question/12924347

#SPJ4

3.74 moles of Na will be produced after the decomposition of Na₂O.

The decomposition reaction of Na2 is as follows:

2Na₂o → 4Na + o₂

Given, moles of Na₂o = 1.87

From stoichiometric coefficient 2 in Na₂o, after decomposition we get coefficient as 4 of Na. That means the yield of Na is double the reactant.

Hence, the moles of Na after decomposition= 2 x 1.87 = 3.74 moles

Learn more about Stoichiometry:

brainly.com/question/9743981

# SPJ4

The given double displacement reaction can be balanced as written below:

[tex]\rm 3CaCl_{2} + 2Na_{3}PO_{4} \rightarrow Ca_{3}PO_{4} + 6 NaCl \\[/tex]

Displacement reactions are those in which one or two groups are replaced to form the new products. There are both single displacement reaction and double double displacement reactions.

In single displacement reactions, only one reactant will be replaced in the reaction whereas in double displacement reactions, two groups from the reactants are exchanged each other.

In the given reaction, the phosphate group is replaced to Ca and the Cl is group is shifted to Na metal as written in the chemical equation.

To find more on displacement reaction, refer here:

https://brainly.com/question/29307794

#SPJ1

The given equation is a double displacement reaction. It can be balanced as follows:

[tex]\rm 2HI + Rb_{2}S \rightarrow H_{2}S + RbI_{2}[/tex]

Displacement reaction is a type of reaction in which one or two group from the reactants displaces by other groups. There are both single displacement and double displacement.

In single displacement reaction, only one group is displaced. Whereas, in double displacement reactions, two groups are displaced each other between reactants.

In the given reaction, the iodine atom and sulphide group are displacing as written in the equation.

To find more on displacement reaction, refer here:

https://brainly.com/question/29307794

#SPJ1

A brittle white crystalline solid  reacts with when added to water is Quartz. It is a metamorphic solid.

Quartz is the most abundant silica mineral. Pure Quartz is colorless and transparent. It occurs in most igneous and practically all metamorphic and sedimentary rocks. It is used as a component of numerous industrial materials. Silicon (Si) has the atomic number 14 and is closely related to carbon. It is a relatively inert metalloid. Silicon is often used for microchips, glass, cement, and pottery. Silica is the most abundant mineral found in the crust of the earth. One of the most common uses of silica quarts is the manufacturer of glass. Quartz is the second most abundant mineral in the Earth's crust. Its chemical name is SiO2.

To learn more about Quartz please visit:

https://brainly.com/question/19451647

#SPJ4

Answer:

The periodic table is a useful tool for understanding the properties of elements and predicting how they will interact with each other. The alkali metals, including sodium, are located in group 1 of the periodic table. These elements have only one electron in their outermost shell, which makes them very reactive. They readily lose this outer electron to form an ion with a positive charge, which is called a cation.

Chlorine, on the other hand, is a halogen located in group 17 of the periodic table. Halogens have seven electrons in their outermost shell, which makes them highly reactive. They readily gain an electron to form an ion with a negative charge, which is called an anion.

When sodium and chlorine interact, they form an ionic bond to create the compound sodium chloride, or table salt. In this process, sodium loses its outer electron to form a sodium cation, and chlorine gains an electron to form a chlorine anion. The positive sodium cation is then attracted to the negative chlorine anion, forming an ionic bond. This bond is strong enough to hold the two ions together, creating a stable compound.

Therefore, sodium and chlorine bond to form table salt because they have the opposite charges and opposite reactivities that are necessary to form an ionic bond. The periodic table can help us understand this bonding process by providing information about the number of electrons in the outermost shell of each element, which determines their reactivity and ability to form ions.

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, in below given ways, periodic table helps in explaining the reason of bonding.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

An ionic compound is a metal and nonmetal combined compound.  Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.

Because sodium and chlorine have the opposing charges and reactivities required to create an ionic bond, they bind to make table salt. The periodic table can help us comprehend this bonding process by revealing the amount of electrons in each element's outermost shell, which governs their reactivity and capacity to generate ions.

Therefore, in above ways, periodic table helps in explaining the reason of bonding.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ2

A pulley's output force can be increased by increasing the input force.

This is referred to as the force which is exerted on an object by a simple machine. We should also note that in a scenario where the output force is greater than the input force, the mechanical advantage is greater and vice versa.

In a situation where the output force needs to be increased, then we have to also increase the input force which is also known as the effort and vice versa and is therefore the reason why an increase was chosen as the correct choice.

Read more about Output force here https://brainly.com/question/1237604

#SPJ1

Answer: The reaction with caesium is more vigourus.

The reaction with caesium produces different compund.

Explanation:

Cold water and cesium react to produce hydrogen gas and a mixture of cesium and hydroxide ions as byproducts.

Molecular compounds are termed by using the stem of the first element's name plus the suffix -ide, followed by the second element. Numerical prefixes are used to specify the number of atoms in a molecule.

The IUPAC defines a common name as one that clearly identifies a chemical but does not adhere to the current systematic naming convention. Acetone, which bears the scientific term, serves as an illustration of a common name. 2-propanone

A chemical is any substance whose composition is known. A chemical always consists of the same "substance," to put it another way. Water is one of the substances found in nature.

To know more about Molecular compounds visit:-

https://brainly.com/question/20920787

#SPJ1

The volume of the solution is 1.84 × [tex]10^{4}[/tex] L.

The formula used to get the molarity of the solution is used to determine the volume of the solution:

Molarity= [tex]\frac{Mass of the solute}{molar mass of solute * Volume of solution(in L)}[/tex]

We are given:

Molarity of solution = 8.75 × [tex]10^{-5}[/tex] M

Given the mass of silver (II) oxide = 200 g

Molar mass of silver (II) oxide = 124 g/mol

Put the values in the formula:

8.75 × [tex]10^{-5}[/tex][tex]10^{-5}[/tex] = [tex]\frac{200}{124* Volume}[/tex]

Volume= 1.84 × [tex]10^{4}[/tex] M

A chemical species' concentration in a solution, specifically the amount of a solute per unit volume of solution, is measured by its molar concentration. The most used molarity unit in chemistry is the number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units.

To know more about molarity click on the link below:

https://brainly.com/question/17138838

#SPJ4

There are two moles of oxygen in cassiterite (tin ore), SnO2, for every mole of tin. As a result, if we have 13 moles of tin, we should have 13 * 2 moles of oxygen. This results in 26 moles of oxygen.

Cassiterite (SnO2) is the most essential tin ore, and it is frequently located in granite veins, granite pegmatites, and greisen. The name is derived from the Greek kassiteros, which means tin.

Cassiterite is a tin oxide mineral with the chemical formula SnO2. It is the primary significant source of tin, accounting for the majority of the world's supply. Primary cassiterite is found in trace amounts in igneous and metamorphic rocks all over the world. It is a mineral that can be found in soils and sediments. Cassiterite is more resistant to deterioration than many other minerals, so it is found in stream and shoreline sediments. Colors include black, brownish black, reddish brown, brown red, yellow, gray, and white.

For more information on Cassiterite, visit :

https://brainly.com/question/18484656

#SPJ4

SF6 molecular geometry will be octahedral because if we look at the structure sulphur hexafluoride has a central sulphur atom around which12 electrons or 6 electron pairs are present and there are no lone pairs.

To learn more about ‘greenhouse effect’ refer to:

https://brainly.com/question/19521661

#SPJ4

Radiation is different from convection and conduction.

Heat transfer is the transport of heat from an area with higher heat content to one of lower heat content. When all of the components of the system are in thermal equilibrium, or when everything is at the same temperature, heat transfer ceases.

Because radiation transfers heat through light instead of a medium, it differs from convection and conduction. Heat is transported during convection through air or water currents. Conduction happens when two materials come into direct contact, like when a pan touches a heat source directly. However, radiation is the transfer of heat using light. This is how heat from the Sun reaches the Earth. This kind of heat transfer enables the transport of heat from space to Earth without the need for a medium.

Learn more about Radiation:

brainly.com/question/1497235

#SPJ4

The empirical formula for the compound if A denotes the cations and X denotes the anions is AX₂

It is given that the cations are denoted by Blue color and the anions with green color. There are 8 atoms in the corners and 6 in the face center. Then,

No of atoms in a total of all corners = 8 x 1/8

No of atoms in the corners = 1

No of atoms in the faces = 6 x 1/2

No of atoms in the faces = 3

Then,

Total no of cations atoms = total number of atoms in the corners + the total number of atoms in the faces

Total number of cations (A) = 1 + 3

Total number of cations (A) = 4

The total number of anions in the cell is 8 from the figures as they aren't shared with another lattice arrangement. Therefore,

Number of anions (X) = 8

Then the empirical formula would be A₄X₈ which could be written in the simplified form of AX₂.

Thus, the empirical formula is AX₂ for the arrangement.

To know more about the arrangement of atoms in solids, click here:

https://brainly.com/question/18924454

#SPJ4

The group of chemical element which an atom from group 2A forms an ionic bond with is most likely from group 7A

An ionic bond can formed between calcium from from group 2A and fluorine from group 7A to form calcium fluoride. In order words, Calcium fluoride is an ionic chemical compound which is insoluble in water. Calcium fluoride is composed of calcium ion and fluoride ion.

In conclusion, it can be deduced from the explanation given above that calcium fluoride is an ionic compound.

Read more on atoms:

https://brainly.com/question/6258301

#SPJ1

An ion is an atom with an unbalanced ratio of protons to electrons. Atoms or molecules having associated net charges greater than zero are referred to as "ions."

a charged molecule or atom is referred to as an ion. It charges up or down depending on whether one or more electrons are gained or lost. Because of this, it can have a positive or negative charge. Consequently, an ion becomes charged when there is an imbalance between the proportion of positively charged protons to negatively charged electrons. Ions can be categorised into one of two major types. Cations and anions are what they are.A superscript with a plus sign and the number before the plus sign is applied to the chemical formula to represent the symbol for a cation.Anions are represented similarly to cations by the charge number followed by a negative sign.Another subatomic particle with a positive electrical charge is the proton. They are present in the atom's nucleus.

Learn more about ions Refer:brainly.com/question/14982375

#SPJ4

The following has the lowest conductivity are the bacl2 that is 0.1 m as bacl2 is not good electrolyte.

Therefore BaCl2·2H2O is a great selec- tion for growing a polymer electrolyte in addition to for right ionic conductivity results.The molar conductivities at countless dilution of barium chloride, sulphuric acid and hydrochloric acid are 280, 860 and 426 S cm2 mol–1 respectively.

BaCl2 can not behavior energy in fused kingdom due to the fact charged debris can not flow in the crystal. BaCL2 is less in conductivity as it has not any of the conductive character and thus cannot definitely says about the conductive.

Read more about conductivity;

https://brainly.com/question/893656

#SPJ4

a. hcl, hno3, hf, hclo4 b. h2so4  list contains only strong acids.

Chloric acid, hydrochloric acid, hydrochloric acid, hydroiodic acid, nitric acid, perchloric acid, and sulfuric acid are the 7 main acids. These are strong acids since they can completely dissociate in water. A strong acid is described as an acetone that completely disintegrates when added to water. Because the hydrochloric acid inside the preceding example donates every one of its protons to the remedy and totally dissolves, it is classified as a strong acid.

learn more about strong acids here:

https://brainly.com/question/16749233

#SPJ4

When 35.00 grams of niobium is mixed with 75.00 grams of iodine the percent yield for the product is 63.29% the mass of the product (in grams) formed is 60.50g

The chemical equation of the reaction between Niobium and Iodine is given by,

3Nb(s) + 4I₂(s) ------> Nb₃I₈(s)

Stoichiometrically, 4moles I₂ is reacting with 3moles of Nb

Given moles of Nb = 35.00g /92.91g/mol = 0.3767mol

Given moles of I₂ = 75.00g/253.8g/mol = 0.2955mol

0.3767moles of Nb reacts with (4/3) × 0.3767mol = 0.5023mol of I2 but available moles of I₂ is 0.2955mol

Therefore,

Limiting reactant is I₂

stoichiometrically, 4 moles of I₂ gives 1mole of Nb₃I₈

0.2955moles of I₂ gives 0.2955mol/4 = 0.073875 moles of Nb₃I₈

molar mass of Nb₃I₈ = 1293.93g/mol

Theoretical yield = 1293.93g/mol × 0.073875mol = 95.59g

Percent yield = (Actual yield / Theoretical yield) ×100

63.29 = (Actual yield /95.59g ) × 100

Actual yield = 60.50g

Therefore,

The mass of the product formed is 60.50g

To know more about stoichiometry, click below:

https://brainly.com/question/14935523

#SPJ4

When 35.00 grams of niobium is mixed with 75.00 grams of iodine the percent yield for the product is 63.29% the mass of the product (in grams) formed is 60.50g    

The chemical equation of the reaction between Niobium and Iodine is given by,

3Nb(s) + 4I₂(s) ------> Nb₃I₈(s)

Stoichiometrically, 4moles I₂ is reacting with 3moles of Nb

Given moles of Nb = 35.00g /92.91g/mol = 0.3767mol

Given moles of I₂ = 75.00g/253.8g/mol = 0.2955mol

0.3767moles of Nb reacts with (4/3) × 0.3767mol = 0.5023mol of I2 but available moles of I₂ is 0.2955mol

Therefore,

Limiting reactant is I₂

stoichiometrically, 4 moles of I₂ gives 1mole of Nb₃I₈

0.2955moles of I₂ gives 0.2955mol/4 = 0.073875 moles of Nb₃I₈

molar mass of Nb₃I₈ = 1293.93g/mol

Theoretical yield = 1293.93g/mol × 0.073875mol = 95.59g

Percent yield = (Actual yield / Theoretical yield) ×100

63.29 = (Actual yield /95.59g ) × 100

Actual yield = 60.50g

Therefore,

The mass of the product formed is 60.50g

To learn more about stoichiometry visit:

https://brainly.com/question/22288091

#SPJ4

When a hammer strikes a nail, the nail exerts an equal and opposite force back on the hammer. Option 4.

According to Newton's third law of motion, for every action, there is an equal but opposite reaction. In other words, for a resting object, there are two forces:

Newton's third law of motion can be mathematically expressed as:

F = ma

Where

Now, when we consider a nail being stroked by a hammer, the hammer is exerting a force on the nail. In accordance with Newton's third law of motion, the nail will also exert the same magnitude of force back on the hammer. This means that the force has to be in the opposite direction to the force exerted by the hammer.

More on Newton's law of motion can be found here: https://brainly.com/question/29775827

#SPJ1

The nickel has a face-centered cubic (fcc) structure and has a density of 8.90 g/cm3. its atomic radius is 1.36 × 10⁻⁸ cm.

given that :

density = 8.90 g/ cm³

the density is given as :

density = mass / volume

no. of atoms = 8 (1/8) + 6(1/2)

volume = (r ×  8 (1/8))³

mass = 4 atoms ×  mol / 6.022 × 10²³ atoms × 58.68 g /mol

density = mass / volume

8.90 g/ cm³ = (4 atoms ×  mol / 6.022 × 10²³ atoms × 58.68 g /mol ) /  (r ×  8 (1/8))³

r = 1.36 × 10⁻⁸ cm

Thus, the atomic radius is  1.36 × 10⁻⁸ cm.

To learn more about atomic radius here

https://brainly.com/question/2795197

#SPJ4

The  halogen forms the weakest bond to carbon is Iodine due to vary size difference between iodine and a carbon

Iodine is a chemical element with the symbol I and atomic number 53. It is a halogen, which means it is a highly reactive, nonmetal element that occurs in the periodic table among the highly reactive nonmetals. Iodine is a blue-black, lustrous solid that sublimates (turns from a solid directly into a gas) at standard temperature and pressure. It has a melting point of 386.85 degrees Fahrenheit (193.65 degrees Celsius) and a boiling point of 575.1 degrees Fahrenheit (302.9 degrees Celsius). Iodine is an essential trace element in the human body. It plays a vital role in the production of thyroid hormones, which are important for normal growth and development. The thyroid gland, located in the neck, absorbs iodine from the blood and uses it to produce thyroid hormones. Iodine deficiency can lead to goiter, a condition characterized by an enlarged thyroid gland.

To know more about  Iodine visit : https://brainly.com/question/20535640

#SPJ4

4.447 x10^13 J  is the nuclear binding energy per mole if the mass defect of a certain isotope is 0.1172 u per atom or 0.1172 g per mol? express your answer in joules.

BE = dleta mc^2.

Given that, delta m = mass defect = 0.4941 g per mol = 0.4941/1000 kg/mol c = 3x10^8 m/s

BE = ( 0.4941/1000) x (3x10^8)^2= 4.4469 x10^13

    = 4.447 x10^13 J

Nuclear binding energy is energy required to completely separate an atomic nucleus in with its constituting protons and neutrons, or the energy freed by combining protons and neutrons into a single nucleus. Isotopes are atoms that have the same number of protons but number of protons. They have nearly identical chemical composition but differ in volume and thus in physicochemical parameters.

Learn more about Nuclear binding energy here:

https://brainly.com/question/2923968

#SPJ4