Both aldehydes and ketones contain a carbonyl group a functional group with a carbon oxygen double bond, hence the carbonyl in aldehydes and ketones forms sp²hybridization.

Answer:

reduced; oxidized

Explanation:

An electron transport chain can be defined as a series of redox reactions (electron transporters or proton complexes) that are saddled with the responsibility of transferring electrons from electron donors to electron acceptors through a membrane in order to produce a protein gradient that creates energy or adenosine triphosphate (ATP).

Generally, as these electrons are transferred through the electron transport chain, the molecules are first reduced as they pick up electrons, and then oxidized as they release the electrons.

Cellular respiration can be defined as a series of metabolic reactions that typically occur in cells so as to produce energy in the form of adenosine triphosphate (ATP). During cellular respiration, high energy intermediates are created that can then be oxidized to make adenosine triphosphate (ATP). Therefore, the intermediary products are produced at the glycolysis and citric acid cycle stage.

Additionally, mitochondria provides all the energy required in the cell by transforming energy forms through series of chemical reactions; breaking down of glucose into Adenosine Triphosphate (ATP) used for providing energy for cellular activities in the body of living organisms.

Answer:

[tex] moles = \frac{ number \: of \: particles}{6.02 \times {10}^{23} } [/tex]

=1.806×10^22/6.02×10^23

=0.03 moles

hope this helps :)

Answer:

Todas son correctas

Explanation:

I) Los compuestos del carbono son solubles en disolventes no polares como el hexano, benceno, éter, etc. VERDADERO. La mayoría de los compuestos de carbono son apolares, y basados en la regla: Similar disuelve similar, podemos presumir que la mayoría de compuestos de carbono se disuelven en solventes no polares.

II) Los compuestos del carbono generalmente presentan puntos de fusión y de ebullición bajos. VERDADERO. Al ser sustancias apolares, sus fuerzas electrostáticas son bajas. De la misma manera, como su masa atómica es pequeña, las fuerzas de Van der Waals son despreciables haciendo que sus puntos de fusión y ebullición sean bajos respecto a sustancias de estrucutra similar.

III) La gran mayoría de los compuestos del carbono son combustibles, sean estos, gaseosos, líquidos o sólidos. VERDADERO. Los gases (Como el gas natural) son combustibles usados para cocina. Los líquidos (Como la gasolina) son combustibles y bastante inflamables. Los sólidos (Como la madera) se usan como combustibles para hacer asados o son el combustible en incendios forestales.

IV) El enlace covalente es característico de los compuestos del carbono. VERDADERO. La polaridad del carbono es neutral haciendo que la mayoría de los enlaces que forma sean covalentes.

Answer:g

Explanation:

Answer:

Shift it toward the side with lower total mole concentration

Explanation:

The reaction will shift in a direction that is less affected by stress, so that the pressure is reduced. This means that the reaction will change towards where there is fewer gas molecules (the fewer gas molecules, the smaller the pressure).

Answer:

A. Shift it toward the side with lower total mole concentration

Explanation:

Answer: The mass of NaCl required to make 140 grams of a 12% solution of NaCl in water is 17 g.

Explanation:

Given: Mass of solution = 140 g

Mass percent = 12%

Formula used to calculate grams of solute are as follows.

[tex]Grams of solute = \frac{grams of solution \times mass percent}{100 percent}[/tex]

Substitute the values into above formula as follows.

[tex]Grams of solute = \frac{grams of solution \times mass percent}{100 percent}\\= \frac{140 g \times 12 percent}{100 percent}\\= 16.8 g\\= 17 g[/tex]

Thus, we can conclude that the mass of NaCl required to make 140 grams of a 12% solution of NaCl in water is 17 g.

Considering the definition of percentage by mass, the correct answer is the third option: 17 grams of NaCl is required to make 140 grams of a 12% solution of NaCl in water.  

The Percentage Composition is a measure of the amount of mass that an element occupies in a compound and indicates the percentage by mass of each element that is part of a compound.

This is, the percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.

In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.

The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:

[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]

In this case, you know:

Replacing:

[tex]12=\frac{mass of solute}{140 grams}x100[/tex]

Solving:

mass of solute= [tex]\frac{12 x 140 grams}{100}[/tex]

mass of solute= 16.8 grams ≅ 17 grams

Finally, the correct answer is the third option: 17 grams of NaCl is required to make 140 grams of a 12% solution of NaCl in water.

Learn more about percentage by mass:

brainly.com/question/19168984?referrer=searchResults

brainly.com/question/18646836?referrer=searchResults

brainly.com/question/24201923?referrer=searchResults

brainly.com/question/9779410?referrer=searchResults

brainly.com/question/17030163?referrer=searchResults

Answer:

Rr

Explanation:

Answer:

Explanation:

Because you only have one repeat unit, n=1. 2n-1 becomes 2(1)-1 which is equal to one, meaning one molecule of H2O is produced, as is shown by the top condensation polymerisation reaction.

If you had two repeat units, n=2 so 2n-1=3. Three H2O molecules are produced because you would need two molecules of each reactant so three condesation reactions would occur and three molecules of H2O would be released.

Answer:

i believe energy is your answer here

Answer:

To determine the number of atoms of Boron that are present within 3.61 grams of Boron Trifluoride, it would be best to convert the grams to moles of the compound and then after that use the Avogadro's number to determine the number of molecules and then use the 1 to 3 ratio to determine the total number of Boron atoms.

Answer:

B. Anyone can make a claim, but a scientific claim is backed by experimental evidence.

<3 Have a nice day!!

Answer:

the awnser is B i got it right

Explanation:

Answer: The mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.

Explanation:

Given: Volume = 450 L

Temperature = 450 K

Pressure = 300 atm

The reaction equation is as follows.

[tex]N_{2} + 3H_{2} \rightarrow 2NH_{3}[/tex]

Here, 1 mole of nitrogen reacts to give 2 moles of ammonia.

From the given data, moles of nitrogen are calculated as follows.

PV = nRT

where,

P = pressure

V = volume

n = no. of moles

R = gas constant = 0.0821 L atm/mol K

T = temperature

Substitute the values into the above formula as follows.

[tex]PV = nRT\\300 atm \times 450 L = n \times 0.0821 L atm/mol K \times 450 K\\n = \frac{300 atm \times 450 L}{0.0821 L atm/mol K \times 450 K}\\= \frac{135000}{36.945}\\= 3654.08 mol[/tex]

For 3654.08 moles of nitrogen, the moles of ammonia produced is as follows.

[tex]2 \times 3654.08 mol\\= 7308.16 mol[/tex]

Therefore, mass of ammonia (molar mass = 17.03 g/mol) is calculated as follows.

[tex]Moles = \frac{mass}{molarmass}\\7308.16 mol = \frac{mass}{17.03 g/mol}\\mass = 124457.96 g[/tex]

Thus, we can conclude that the mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.

Answer:

NO. 10.

performed experiments

NO. 11.

Inference

Explanation:

No 10.

in order to prove that Mary Mellon was in fact infected by typhoid proper experiments needs to be carried out.

No. 11

inference means an assumption due to the situation.

Answer:

His total displacement is 80 m northwards

Explanation:

Given;

Mike's first displacement, x₁ = 100 m North

Mike's second displacement, x₂ = 30 m South

Mike's third displacement, x₃ = 10 m North

Let his Northwards direction be positive, and

his Southwards direction be negative

His total displacement = (100 m North) + ( - 30 m South) + (10 m north)

                                     = (100 m + 10m - 30 m)

                                     = 80 m  Northwards

B. A circle.

The center void shape that generates the most thrust in a solid fuel rocket is a circle.

What is Fuel?

Fuel is a substance that is used to produce heat or energy through combustion or other chemical reactions. It can be in the form of a solid, liquid, or gas and is typically used to power engines, generators, or heating systems. Examples of fuels include gasoline, diesel, natural gas, coal, wood, and propane. The choice of fuel depends on factors such as availability, cost, energy content, and environmental impact.

This is because a circular shape allows for the most efficient burning of the fuel, with the flame front moving evenly in all directions. Other shapes, such as a heart, triangle, or tree with branches, can cause uneven burning and may result in less thrust.

Learn more about Fuel from the given link

https://brainly.com/question/10172005

#SPJ1

Answer:

Explanation:

D.
tree with branches

Voltaic cells convert chemical energy to electrical energy by means of an oxidation-reduction reaction while Electrolytic cells convert electrical energy to chemical energy, so they are the opposite of voltaic cells,in an electrolytic cell, the cathode is negatively charged and the anode is positively charged

Answer:

ELECTROLYTIC CELL

An electrochemical cell in which a non-spontaneous chemical reaction takes place when electric current is passed through the solution,is called an electrolytic cell.

EXAMPLE

Nelsons cell and Downs cell

VOLTAIC CELL OR GALVANIC CELL

The electrochemical cell in which a spontaneous chemical reaction takes place and generates electric current is called galvanic and voltaic cell.

EXAMPLE

Daniel cell

Explanation:

Answer: If a gas is pumped from a smaller container to a container that is twice the size, and its pressure is kept the same, then temperature of the gas increases twice.

Explanation:

Charles law states that at constant pressure, the volume of a gas is directly proportional to the temperature.

That is, [tex]V \propto T[/tex].

So, when a gas is pumped from a smaller container to a container that is twice the size shows that volume is increasing by 2 times and its pressure is kept the same.

Therefore,

[tex]2V \propto 2T[/tex]

This means that the temperature of the gas will also become twice its initial temperature.

Thus, we can conclude that if a gas is pumped from a smaller container to a container that is twice the size, and its pressure is kept the same, then temperature of the gas increases twice.

Answer:

0.241 M

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

HBr + NaOH —> NaBr + H₂O

From the balanced equation above,

The mole ratio of acid, HBr (nₐ) = 1

The mole ratio of base, NaOH (n₆) = 1

Finally, we shall determine the concentration of the NaOH solution. This can be obtained as follow:

Volume of base, NaOH (V₆) = 20 mL

Volume of acid, HBr (Vₐ) = 24.1 mL

Concentration of acid, HBr (Cₐ) = 0.2 M

Concentration of base, NaOH (C₆) =?

CₐVₐ / C₆V₆ = nₐ/n₆

0.2 × 24.1 / C₆ × 20 = 1/1

4.82 / C₆ × 20 = 1

Cross multiply

C₆ × 20 = 4.82

Divide both side by 20

C₆ = 4.82 / 20

C₆ = 0.241 M

Therefore, the concentration of the NaOH solution is 0.241 M

Answer:

There is 9.6 grams of CO2 produced

Explanation:

Step 1: Data given

Mass of methane = 5.50 grams

Molar mass of methane = 16.04 g/mol

Mass of oxygen = 13.9 grams

Molar mass of oxygen = 32.0 g/mol

Step 2: The reaction

CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)

Step 3: Calculate number of moles

Moles = mass / molar mass

Moles methane = 5.50 grams / 16.04 g/mol

Moles methane = 0.343 moles

Moles oxygen = 13.9 grams / 32.0 g/mol

Moles oxygen = 0.434 moles

For 1 mol CH4 we need 2 moles O2 to produce 1 mol CO2 and 2 moles H2O

O2 is the limiting reactant. It will completely react (0.434 moles).

There will react 0.434/2 = 0.217 moles CH4

There will remain 0.343-0.217 = 0.126 moles CH4

There will be produced 0.434 moles of H2O and

0.434/2 =0.217 moles of CO2

Step 4: Calculate mass of products

Mass = moles * molar mass

Mass CO2 = 0.217 moles ¨44.01 g/mol

Mass CO2 = 9.6 grams

Mass H2O = 0.434 moles * 18.02

Mass H2O = 7.8 grams

Answer:

When gases in containers are heated, their molecules increase in average speed. This means that they exert a greater force when they collide with the container walls, and also collide with the walls more frequently. The gas is therefore under greater pressure when its temperature is higher.

Answer:

λ = 2.38 × 10^(-7) m

Explanation:

We are given the work function for palladium as 503.7 kJ/mol.

Now let's convert this to KJ/electron.

We know from avogadro's number that;

1 mole of electron = 6.022 × 10^(23) electrons

Thus,

503.7 kJ/mol = 503.7 × 1/(6.022 × 10^(23)) = 8.364 × 10^(-22) KJ/electron = 8.364 × 10^(-19) J/electron

Formula for energy of a photon is;

E = hv

Where;

h is Planck's constant = 6.626 × 10^(-34) J.s

v is velocity

Now, v = c/λ

Where;

c is speed of light = 3 × 10^(8) m/s

λ is wavelength of light.

Thus;

E = hc/λ

Making λ the subject, we have;

λ = hc/E

λ = (6.626 × 10^(-34) × 3 × 10^(8))/(8.364 × 10^(-19))

λ = 2.38 × 10^(-7) m

Answer:

i am so sorry. i do not have a answer but i am trying to find questioms i can answer

Explanation:

here is the answer to the question

ajdhrhahdjdjdndoxhdebdixhxb dbds ebenej

[tex]\huge\fcolorbox{red}{pink}{Answer ♥}[/tex]

The carbon atom is unique among elements in its tendency to form extensive networks of covalent bonds not only with other elements but also with itself. ... Moreover, of all the elements in the second row, carbon has the maximum number of outer shell electrons (four) capable of forming covalent bonds.

Hope it helps uh ✌️✌️✌️

Gud mrng

Answer:

i think its C polymer hope it helps

Answer:

Isotope 2

Explanation:

Isotope 2 is the most abundant. Its percent abundance is 78.68% which is the largest percentage, and therefore the most common of the isotopes presented.

Good luck!