Explanation:
given: m= 105kg,f=170N,a=?
F = m×a
a = f/m
a=170/105
therefore, a=1.62m/s^2
The gravitational force acting on various masses is measured on different planets. Measured values for the forces acting on the corresponding masses are shown in the data table. Analyze the data and develop a method for comparing the gravitational field strengths on the different planets. Use your method to compare the gravitational field strengths, and report your conclusions.
2(a)
A car accelerates from 22ms^-1 to 43ms*-1 in 18.6 seconds.
(a) Calculate the acceleration of the car.
2(b)
Find the distance covered by the car in 10 seconds.
2(c) Find the velocity after 5 seconds.
Answer:
2a.
a=1.13ms^-2
2b.
S=277m
2c.
V=27.7ms-¹
Explanation:
Initial Velocity (U)=22m/s¹
Final Velocity (V)=43m/s²
Time(t) =18.6s
a. a=V-U/t
a=43-22/18.6
a=1.129
a=1.13m/s²
2b.
S=ut+1/2 at²
s=22(10)+1/2×1.13(10)²
s= 220+0.57(10)²
s= 220+0.57(100)
s= 220+57
s=277m
2c.
V=U+AT
V=22+1.13(5)
V=22+5.65
V=22+5.7
V=27.7m/s¹
A hydraulic jack is used to lift a car by applying a force of 120 N at the pump piston.
If the area of the ram and pump piston are 100 cm2 and 1m2 respectively:
(i)Calculate the force that is applied to the ram.
Answer:
I don't know.. sorry
Explanation:
help u next time
To catch a fast-moving ball, you extend your hand forward before contact with the ball and let it ride backward in the direction of the ball's motion. Doing this reduces the force of contact on your hand principally because the Group of answer choices force of contact is reduced relative velocity is less time of contact is increased time of contact is decreased none of these
Answer:
C: time of contact is increased
Explanation:
When a ball is falling from height, it maintains the same mass but velocity may change depending on the conditions in that environment.
Now, to catch the ball on your palm, you need to find a way to reduce the momentum of the ball upon hitting your hand.
Now, to reduce the momentum, we need to apply impulse.
This is because we know that;
Impulse(I) = F × t = change in momentum (m(v - u))
Thus;
I = Ft
F = I/t
We are told that extending the hand reduces the force of contact on your hand.
Thus;
For F which is the force to be reduced, the denominator (t) has to be increased.
Thus, the correct answer is that time of contact is increased
Compared with dim light, what do light waves that look bright tend to have the subject just says science but the picker doesn't have that
Answer:
The brightness of a light depends on the amplitude of the light wave, which is the extent the waves moves from their equilibrium position. The brightness is also related to the amount of light that is emitted or reflected by an object
Therefore, compared to dim light, light that look bright have a higher amplitude and emit or reflect more light energy (photons)
Explanation:
PLEASE HELP!!!
Write the sentences in your copybook and draw a line through one of the words in
bold to complete each of these sentences about alkali metals correctly.
Alkali metals generally become more / less dense going down the group.
The melting and boiling points of alkali metals increase / decrease down the group.
The softness of alkali metals increases / decreases going down the group.
The speed with which alkali metals react with oxygen increases / decreases going
down the group.
Answer:
Densities increase down the group
MP and BP decrease down the group
Softness increased going down the group
Speed of reacting increases going down the group
49. A block is pushed across a horizontal surface with a
coefficient of kinetic friction of 0.15 by applying a
150 N horizontal force.
(a) The block accelerates at the rate of 2.53 m/s2
Find the mass of the block.
(b) The block slides across a new surface while
experiencing the same applied force as before.
The block now moves with a constant speed.
What is the coefficient of kinetic friction between
the block and the new surface?
Answer:
(a) 37.5 kg
(b) 4
Explanation:
Force, F = 150 N
kinetic friction coefficient = 0.15
(a) acceleration, a = 2.53 m/s^2
According to the newton's second law
Net force = mass x acceleration
F - friction force = m a
150 - 0.15 x m g = m a
150 = m (2.53 + 0.15 x 9.8)
m = 37.5 kg
(b) As the block moves with the constant speed so the applied force becomes the friction force.
[tex]F = \mu m g \\\\150 = \mu\times 37.5\\\\\mu = 4[/tex]
A light spring with force constant 3.05 N/m is compressed by 7.80 cm as it is held between a 0.400-kg block on the left and a 0.800-kg block on the right, both resting on a horizontal surface. The spring exerts a force on each block, tending to push the blocks apart. The blocks are simultaneously released from rest. Find the acceleration with which each block starts to move, given that the coefficient of kinetic friction between each block and the surface is 0, 0.035, and 0.397. (Let the coordinate system be positive to the right and negative to the left. Indicate the direction with the sign of your answer. Assume that the coefficient of static friction is the same as the coefficient of kinetic friction. If the block does not move, enter 0.)
Complete Question
A light spring with force constant 3.05 N/m is compressed by 7.80 cm as it is held between a 0.400-kg block on the left and a 0.800-kg block on the right, both resting on a horizontal surface. The spring exerts a force on each block, tending to push the blocks apart. The blocks are simultaneously released from rest. Find the acceleration with which each block starts to move, given that the coefficient of kinetic friction between each block and the surface is 0, 0.035, and 0.397. (Let the coordinate system be positive to the right and negative to the left. Indicate the direction with the sign of your answer. Assume that the coefficient of static friction is the same as the coefficient of kinetic friction. If the block does not move, enter 0.)
(a) u = 0 heavier block m/s2 m/s2 lighter block
(b)M = 0.035 heavier block m/s2 m/s2 lighter block
Answer:
a) [tex]A_h=0.297[/tex]
[tex]A_l=-0.59475[/tex]
b) [tex]a=0[/tex]
[tex]a=-0.25175m/s^2[/tex]
Explanation:
From the question we are told that:
Force constant [tex]k=3.05N/m[/tex]
Compression Length [tex]l_c=7.80cm=0.07m[/tex]
Left Mass [tex]M_l=0.400kg[/tex]
Right Mass [tex]M_r=0.800kg[/tex]
Coefficient of kinetic friction [tex]\mu=0, 0.035, and\ 0.397.[/tex]
Therefore
Spring force is given as
[tex]F_s=Kx[/tex]
[tex]F_s=3.05*0.070[/tex]
[tex]F_s=0.238N[/tex]
Generally the equation for Acceleration is mathematically given by
[tex]A=\frac{F}{m}[/tex]
For Heavier block
[tex]A_h=\frac{F_s}{m_r}[/tex]
[tex]A_h=\frac{0.238N}{0.8}[/tex]
[tex]A_h=0.297[/tex]
For Lighter blocks
[tex]A_l=\frac{F_s}{m_r}[/tex]
[tex]A_l=\frac{-0.238N}{0.4}[/tex]
[tex]A_l=-0.59475[/tex]
b)
Generally the equation for Force is mathematically given by
[tex]F_s-F=ma[/tex]
For Heavier block
[tex]F>Fs[/tex]
Therefore
[tex]a=0[/tex]
For Lighter blocks
[tex]F-F_s=ma[/tex]
[tex](0.035)(0.4)(9.8)-(0.2379)=(0.4)a[/tex]
[tex]a=-0.25175m/s^2[/tex]
Which of the following travels with a wave?
O A. Energy only
O B. Matter only
O C. Neither matter nor energy
O D. Both matter and energy
Answer:
A. Energy only is the answer to your question
The boiling point of water is 1000 C at sea level. The boiling point of butane is -1.50C… If we leave liquid butane in a bowl on a table in a room where the temperature is 240C, butane will
A. evaporate.
B. condense.
C. freeze.
D. melt.
Answer: If we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.
Explanation:
A temperature at which the the liquid and gaseous phase of a substance of a substance are present in equilibrium with each other is called boiling point.
For example, the boiling point of butane is -1.5 degree Celsius.
This means that at a temperature above -1.5 degree Celsius, butane will exist is gaseous state. That is, at a temperature of 24 degree Celsius butane will evaporate.
Thus, we can conclude that if we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.
TRUE OR FALSE. When non-conservative forces are present, the amount of work done increases with the length of the path.
Answer:
True
Explanation:
When non-conservative forces are present, the amount of work done increases with the length of the path, this is true because, when a force is applied, the force does when and the non-conservative forces also do work. Since the non-conservative force work against the force applied, this tend to increase the net work done by the applied force to compensate for the loss in energy due to the work done by the non-conservative forces.
Please help me with this...
And Show all steps correctly
Answer:
4 m
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 10 m/s
Acceleration (a) = –8m/s²
Time (t) = 2 s
Displacement (s) =?
The displacement of the object can be obtained as follow:
s = ut + ½at²
s = (10 × 2) + (½ × –8 × 2²)
s = 20 + (–4 × 4)
s = 20 + (–16)
s = 20 – 16
s = 4 m
Thus, the displacement of the object is 4 m.
A policeman kicks in a door with a force of 4500 N. What force does the door apply to the policeman’s leg?
Answer:
-4500 N
Source: Brainly
The police officer must be angry 0_0
22) How is it possible to fill medicine in a syringe?explain
I hope this helps you ^-^
What observation related to spectral lines from distant galaxies provides
evidence for the big bang theory?
A. They appear just as they do on Earth.
B. They are shifted toward the blue end of the spectrum.
C. They fail to shift into the ultraviolet region.
O 0
D. They are shifted toward the red end of the spectrum.
They are shifted toward the red end of the spectrum.
¿Cuánto se demora el sonido en recorrer 3 metros de un cable de cobre, si su rapidez en él es de 3810 m/s
Answer:
1270 segundos
Explanation:
Dada,
Velocidad ( v ) = 3810 m/s
Distancia ( s ) = 3 m
Encontrar : -
Tiempo que tarda el sonido en viajar ( t ) = ?
Fórmula : -
s = d / t
t = d / s
= 3810 / 3
t = 1270 segundos
An egg is dropped onto a wood floor and breaks. When a different egg (same mass) is dropped the same distance onto a foam pad on the wood floor, it does not break. Why (in terms of physics) does this happen?
A. The pad extends the time so the impulse changes.
B. An egg requires a harder surface so it won’t break.
C. The pad pulls the egg to the floor.
D. Wood is harder than the pad.
Answer:
A.
Explanation:
The pad extends the time so the impulse changes.
Answer:
A. The pad extends the time so the impulse changes
Explanation:
in term of physics it has same mass:)
the power in an electrical circuit is given by the equation p=/2 R, where /is the current flowing through the circuit and R is the resistance of the circuit. what is the power in a circuit that has a current of 12
A. 120 watts
B. 8.3 watts
C.144 watts
D. 14,400 watts
Complete Question:
What is the power in a circuit that has a current of 12 amps and a resistance of 100 ohms?
Answer:
D. 14,400 watts
Explanation:
The electrical power of an electric circuit can be defined as a measure of the rate at which energy is either produced or absorbed in the circuit.
Mathematically, electrical power is given by the formula;
[tex] Electrical \; power = current * voltage [/tex]
This ultimately implies that, the quantity (current times voltage ) is electrical power and it is measured (S.I units) in Watt (W).
Given the following data;
Current = 12 AmperesResistance = 100 OhmsTo find the power in the circuit, we would use the following formula;
Power = I²R
Where;
I is current measured in Amperes.R is resistance measured in Ohms.Power = 12² * 100
Power = 144 * 100
Power = 144,000 Watts
You throw a water balloon straight up with a velocity of 14 m/s. What is ite maximum height?
A. 12.9 m
B. 10.0 m
C 11.6 m
D. 13.7 m
Answer:
The maximum height is 10.0m
The correct option about the free fall motion is "10 m".
What is free fall motion?A vertically oriented uniformly accelerated motion is referred to as "free-fall" motion. We refer to a vertical movement of an object either upward or downward as being in free fall.
What are the three equations of motion under uniform acceleration?v = u + at ----------1)s = ut + (1/2)at² ----------2)v² - u² = 2as ----------3)How to solve this question?We have given initial velocity (u) as 14 m/s
and we have to find out the maximum height (s)
We know that at maximum height the final velocity (v) will become 0
and acceleration will always be act toward downward
with the value of g = 9.8 m/s²
Applying the first equation
0 = 14 - 9.8t
9.8t = 14
t = 14/9.8 seconds
t = 1.4 seconds
Applying the second equation
s = 14 × 1.4 + ( (1/2) × (-10) × (1.4)² )
s = 19.6 - ( 5 × 1.96 )
s = 19.6 - 9.8
s = 9.8 m
s ≈ 10 m
Thus, we can conclude that if we throw a water balloon straight up with initial velocity of 14 m/s then the balloon will attain the maximum height of 10 m.
Learn more about free fall here:
https://brainly.com/question/14732889
#SPJ2
URGENT
A Boeing 747 has 2750m runaway to take off. It becomes airborne in 10.5 seconds.
Find the velocity it lives the runaway with?
Answer:
[tex] { \tt{velocity = \frac{distance}{time}}} \\ \\ { \tt{velocity = \frac{2750}{10.5} }} \\ = { \tt{261.9 \: {ms}^{ - 1} }}[/tex]
The summer camps had a field trip from the campus to Fragrance Hill. They traveled at an average speed of 65 km/h in the first 2 hours. After that, traveled at another average speed of 78 km/h. If the distance between the campus and Fragrance Hill is 364 km, what was the total time for the field trip?
Answer:
Explanation:
They traveled this distance in 2 parts, essentially. Part 1 had an average speed for a certain number of hours, part 2 had an average speed for a certain number of hours, and those 2 parts taken together took them a distance of 364 km. In equation form, that looks like this:
km/hr part 1 + km/hr part 2 = 364 km
Now we need to find each part on the left side of that equation. Part 1 first:
We traveled 65 km/hr for 2 hours, so that took us
[tex]65\frac{km}{hr}*2hr[/tex] and canceling out the hour label, we have that in part 1 we got
65(2) = 130 km. Good. Now onto the second part, where our unknown is.
We traveled 78 km/hr the second part for x hours, so that took us
[tex]78\frac{km}{hr}*xhr[/tex] and canceling out the hour label, we have that in part 2 we got
78x km. Now we can fill in the main equation (the one in bold print)
130 km + 78x km = 364 km and subtracting 130 km from both sides:
78x km = 234 km and dividing by 78 km:
x = 3 hours. Part 2 took 3 hours. Part 1 took 2 hours, so the whole trip took 5 hours.
When an object is in a gravitational field, it has energy in its __________ __________ energy store.
Answer:
Gravitational potential
Explanation:
Any object that is not on the surface of the Earth, but at a height instead has potential energy. Eventually, this can become kinetic energy once the object falls.
When an object is in a gravitational field, it has energy in its gravitational potential energy store.
Question 4(Multiple Choice Worth 3 points)
(03.02 MC)
Which statement best reflects a change in weather?
Today is cloudy, but tomorrow will be clear and sunny.
The average rainfall has decreased over the past five years.
Ocean temperatures are projected to increase over time.
Glaciers are melting more rapidly now than in the past 100 years.
plzzz helpppp asap
Answer:
a is your answer.............
in what way is the wheel and axle useful to us
Answer:
Wheel and axle is a simple machine. As we know thatsimple machines makesour work easier faster and more convenient. Like this wheel and axle help us in different ways like it helps to change the direction of force, helps to multiply force applied, helps to do work safely, etc.
I hope this answer will help you. Stay safe.
Answer:
provides forms of transportation and many other gadgets that aid daily life
Explanation:
ex: car tires, bicycles, windmills, doorknobs
The mass of a brick is 2kg. Find the mass of water displaced by it when it is completely immersed in water. (Density of the bricks is 2.5 g/cm^3)
Answer:
2000g
Explanation:
volume=mass/density
=2000/2.5
=800cm³
mass=density×volume
=800×2.5
=2000g
4. Write any three differences between single fixed pulley and single moveable pulley .
Thanks to correct answer.
Brainliest to Best answer.
Report to random and unexplained answers. ✌️♥️..
Answer:
Write any three differences between single fixed pulley and single moveable pulley.
Single fixed pulley;
Pulley do not go up and down.This pulley has a fixed axis of rotation. The load is attached to one end of the rope. Only the direction of the force is changed, not the magnitude.Single moved pulley;
Pulley move up and down.The axis of rotation of this pulley is not fixed. The load is attached to the pulley.The direction of the force as well as the magnitude of force change.when is the mass of an object if it exerts a force of 160 N and an acceleration of 8.15m/s^2
Answer:
f=ma.......m=f/a......m=20kg
An elevator does 9.75 x 10(4) J of work on a person riding up to another floor. How much energy does the person gain
Answer:
9.75 x 10^4 J
Explanation:
Work done, W = 9.75 x 10^4 J
According to the work energy theorem, the change in kinetic energy is equal to the work done by all the forces.
So, here work done is 9.75 x 10^4 J so the change in kinetic energy is 9.75 x 10^4 J.
who is a meteorologist
Answer:
A meteorologist is a scientist that studies and examines Earth's atmosphere and its interactions with Earth's oceans, land, and biosphere.
Explanation:
Meteorologists use math and science to understand and predict changes in weather and climate.
2 What are(i) free fall , (ii) acceleration due to gravity, (iii) escape velocity , (iv) centripetal force?
Answer:
Explanation:
1. Free fall implies an object falling under the gravitational influence only. During the flight, no other force acts on it except the gravitational pull.
2. Acceleration due to gravity is the earth's natural force of pull on all objects on its surface, close to its surface, or in the region where the force can be felt. This force pulls object to the surface of the earth.
3. Escape velocity is the required minimum velocity for an object to leave the gravitational influence of the earth. It has a constant value which can be determined by;
Escape velocity = [tex]\sqrt{2gR}[/tex]
where g is the gravitation force of the earth and R is the radius of the earth.
4. Centripetal force is the force of pull that is required to keep a rotation object in its curved path.
