Answer:
4 protons, 5 neutrons, 4 electrons to have the neutral Be atom
the only way to make a negative Be is to have more than 4 electrons
Explanation:
Make a neutral Beryllium atom by adding protons, neutrons and electrons. Now, what would you do to make a
beryllium atom with a negative charge?
Be has an atomic number of 4, an atomic mass 9
its atomic number tells us it has 4 protons, with a +4 charge
its atomic mass = neutrons + protons, so it has 5 neutrons with no charge
its neutral atom will have 4 electrons each with a negative charge to balance the +4 total proton harge.
so
4 protons, 5 neutrons, 4 electrons to have the neutral Be atom
to make a negative Be species, it still must have an atomic number of 4,
or it is not Beryllium
so the only way to make a negative Be is to have more than 4 electrons
element Q,X, and Z are in the same group on the periodic table and are listed in order of increasing atomic number.The melting point of element Q is -219 Celsius and the melting point of element Z is -7 celsius. Which temperature is closest to the melting point of element X
Answer:
Very low ionization energy: metal bonds easily: group 1, or maybe 2 low melting.
Explanation:
Convert 21 grams of radon into atoms of radon.
Answer:
The atomic mass of radon is 222.
Explanation:
. That means that one mole of radon weighs 222 grams (222 grams/moles). We can therefore make the following equation:
Grams × (1/222) = Moles of Radon
What is the initial concentration of a solution if 40.0 mL is diluted to make 720 mL of a 0.45 M solution?
Answer:
8.1 M
Explanation:
What is the initial concentration of a solution if 40.0 mL is diluted to make 720 mL of a 0.45 M solution?
LET Y = INITIAL CONCENTRATION
SO
Y TIMES 40/720 = 0.45 m
SO
Y= (0.45) X 720/40=
0.45 X 72/4 =
0.45 X 18 =8.1 M
Concentration is related to the mass and volume. 8.1 M initial concentration of a solution is required if 40 ml is diluted to make 720 ml of a 0.45 M solution.
What is initial concentration ?The first measured concentration of a compound in a substance is called as initial concentration. Initial concentration also measure with the help of molarity.
Write out the equation C = m ÷ V, where m is the mass of the solute and V is the total volume of the solution. Substitute the values you found for the mass and volume, and divide them to find the concentration of your solution.
Let X is the initial concentration,
so, X times 40 ÷ 720 = 0.45
X = ( 0.45 ) × ( 720÷40)
= 0.45 × 18
= 8.1 M
Hence, 8.1 M initial concentration of a solution is required .
To learn more about initial concentration follow the link below;
https://brainly.com/question/23546015
#SPJ2
Which of the following corresponds to an alpha particle?
A. 1/4He
B. 3/2He
C. 2/2H
D. 4/2He
Answer:
D. 4/2 He corresponds to an alpha particle.
Engineering chemistry
Answer:
it wont let me see it
Explanation:
what is the functional group and homologous series of ethyl butyrate?
Answer:
Functional group: ROR'
Homologous series: ester [C6H12O2]
Mark brainliest please
The city council of a small town wanted to add fluoride to their water so that all the residents would have healthier teeth. The mayor had read that ionic compounds must be used to get the fluoride into water. He looked up fluorine-containing compounds and came up with the following list.
NaF NF3 SiF4 CaF2 NH4F
Using academic vocabulary in paragraph form, discuss the following:
Explain which compound(s) could produce fluoride ions in the water. In your response, be sure to include:
° which of the listed compounds are ionic and which are covalent.
° how ionic and covalent compounds are different.
° why only ionic compounds would produce fluoride in water.
Answer:NaF is ionic. NF3 is covalent. SiF4 is ionic. CaF2 is Ionic and NH4F is also ionic. Ionic compounds transfer electrons whereas covalent compounds share electrons hence the word "co". Also, ionic compounds are formed with metal and nonmetal. Where a covalent is with 2 nonmetals. Only ionic compounds would produce fluoride in water because ionic compounds can dissolve in water and covalent compounds cant.
The compounds that can be used for the release of fluorine in water are NaF, [tex]\rm SiF_4[/tex], [tex]\rm CaF_2[/tex], and [tex]\rm NH_4F[/tex].
The ionic compounds are formed by the transfer of electrons between the atoms of the compounds. The ionic bonds are weaker and are easy to dissociate in the aqueous solution.
The covalent compounds are formed by the sharing of electrons between the atoms. Since there is sharing, there has been a strong bond, that has been hard to dissociate.
The Mayor has to release Fluoride in the water, thus ionic compounds are preferred that have the easy release of fluorine.
From the given compounds:
NaF = Ionic compound[tex]\rm NF_3[/tex] = Covalent compound[tex]\rm SiF_4[/tex] = Ionic compound[tex]\rm CaF_2[/tex] = Ionic compound[tex]\rm NH_4F[/tex] = Ionic compoundThus the compounds that can be used for the release of fluorine in water are NaF, [tex]\rm SiF_4[/tex], [tex]\rm CaF_2[/tex], and [tex]\rm NH_4F[/tex].
For more information about ionic and covalent compounds, refer to the link:
https://brainly.com/question/10748806
How many peaks will you observe in the 13C spectrum of cyclohexane ?
1 1 - incorrect
3
6
3 peaks
Explanation:
You can do this perfectly well without referring to chemical shift tables at all. In the spectrum there are a total of three peaks - that means that there are only three different environments for the carbons, despite there being four carbon atoms.
An exothermic reaction releases 86.5 kJ. How many kilocalories of
energy are released?
The electron configuration of an element is shown below.
1s22s22p63s23p6
Name the group this element belongs to in the periodic table and explain your answer.
Based on the electron configuration, write one chemical property of this element.
The element belongs to group 18 and the element is chemically inert.
What is electron configuration?The term electron configuration refers to the arrangement of electrons in an atom. The electron configuration of an atom can show the group to which it belongs in the periodic table.
Given the configuration, 1s22s22p63s23p6 the element belongs to group 18 and the element is chemically inert.
Learn more about electron configuration: https://brainly.com/question/5524513
Mixture of a 25.00 mL aliquot of the sample solution with 5.00 mL of a 0.250 ppm warfarin standard yielded a solution with an intensity of 670. Calculate the percentage of warfarin in the sample.
Answer:
750
Explanation:
U ever get an answer
When performing an experiment, the following footwear is best
Answer:
sneakers
Explanation:
Answer:
closed toe shoe
Explanation:
becusae if a cemcal spills it cant hurt your feet
what i compound is
FeI2
Answer:
iodide
Explanation:
Answer:
Iron(II) iodide
Explanation:
A \pu{1.60 g}1.60 g1, point, 60, space, g calcium supplement contains 37.8\%37.8%37, point, 8, percent \ce{Ca}CaC, a by mass. The calcium is present in the supplement as \ce{CaCO3}(s)CaCOX 3 (s) (molar mass \pu{100.09 g/mol}100.09 g/mol100, point, 09, space, g, slash, m, o, l). How many grams of \ce{CaCO3}(s)CaCOX 3 (s) are in the calcium supplement?
A 1.60 g calcium supplement that contains 37.8% Ca by mass, contains 1.51 g of CaCO₃.
We want to calculate the mass of CaCO₃ in a 1.60 g supplement. We need to consider the following relationships.
The mass percent of Ca is 37.8%, that is, there are 37.8 g of Ca every 100 g of supplement.The molar mass of Ca is 40.08 g/mol.The molar ratio of Ca to CaCO₃ is 1:1.The molar mass of CaCO₃ is 100.09 g/mol.[tex]1.60gSup \times \frac{37.8gCa}{100gSup} \times \frac{1molCa}{40.08gCa} \times \frac{1molCaCO_3}{1molCa} \times \frac{100.09gCaCO_3}{1molCaCO_3} = 1.51gCaCO_3[/tex]
A 1.60 g calcium supplement that contains 37.8% Ca by mass, contains 1.51 g of CaCO₃.
Learn more: https://brainly.com/question/14990953
A 1.60 g calcium supplement contains 37.8% Ca by mass. The calcium is present in the supplement as CaCO₃(s) (molar mass 100.09 g/mol). How many grams of CaCO₃(s) are in the calcium supplement?
The student burns 10 g of magnesium in air to produce magnesium oxide (MgO).
2Mg + 0 + 2MgO
Calculate the maximum mass of magnesium oxide that could be produced in the reaction.
Answer:
x=403/24,3 = 16.58 gm MgO
EXPLANATION
The student burns 10 g of magnesium in air to produce magnesium oxide (MgO)
2Mg + 0 + 2MgO
Calculate the maximum mass of magnesium oxide that could be produced in the reaction.
Oxygen exist in nature as O2, diatomic.
so
The student burns 10 g of magnesium in air to produce magnesium oxide (MgO).
2Mg + 02 + 2MgO
Calculate the maximum mass of magnesium oxide that could be produced in the reaction.
2 moles of Mg produce 2 moles of MgO
1 mole of Mg weighs 24.3 and produces 1 mole of MgO
Mg HAS AN ATOMIC MASS OF 24.3
Mg HAS A MOLAR MASS OF 24.3 +16 = 40.3gm/mole
so 24.3 gm of Mg produce 40.3 gm MgO
set up the ratio
10 gm Mg/x of MgO = 24.3/40.3
or
10/x = 24.3/40.3
cross multiply and isolate x (use Algebra I)
24.3x =403
x=403/24,3 = 16.58 gm MgO
Which of the following is a compound? *
A. aluminum
B. carbon
C. oxygen
D. sugar
Answer:
C. OXYGEN
Explanation:
which of the following substances will cross the cell membrance through osomosis
Answer:Water, carbon dioxide, and oxygen are among the few simple molecules that can cross the cell membrane by diffusion (or a type of diffusion known as osmosis ).
Explanation:
Use the choose reaction drop down menu to see other equations, and balance them. Check your answers and then write the balanced equations. AI+ HCI-> AICI3+ H2
NaCI -> Na + CI2
Na2S + HCI -> NaCI + H2S
if 10.5 grams of liquid water is boiled how many grams of water vapor will then form ?
Answer:
It depends
Explanation:
This could vary depending on the exact temp, time and minerals. something with alot of salt boils quicker than something without it, so 10.5 grams?
The particular temperature, the passage of time, and the minerals could all affect the amount of grams of liquid water.
What are minerals?Minerals are defined as a naturally crystallized element or chemical compound that was created through geological processes. Natural materials are those that form on their own, such as minerals. Minerals don't droop, melt, or evaporate since they are solids. In contrast to the carbon compounds found in living organisms, minerals are inorganic. Minerals are crystalline: They have a unique atomic composition and arrangement.
Temperature is defined as a measure of hotness or coldness expressed in terms of any number of arbitrary scales that shows the direction that heat energy will naturally flow, i.e., from a hotter body to a colder body. The three temperature scales that are now in use are Kelvin, Celsius, and Fahrenheit. Food, beverages, agriculture, and medical care for both people and animals all depend heavily on temperature.
Thus, the particular temperature, the passage of time, and the minerals could all affect the amount of grams of liquid water.
To learn more about minerals, refer to the link below:
https://brainly.com/question/18078524
#SPJ2
giving brainly for correct answer! :)
Answer:
Mass is the amount of matter in an object
Answer:
Mass
Explanation:
matter is weighed by the mass of an object
Please help I’m so lost!! Chemistry
Answer:
i will help you
Explanation:
if the reactions have more energy than the products this means that there is some energy that given outside and this reaction will called an exothermic reaction.
But if the reaction have less energy than the products this means that there is some energy that taken from outside and this reaction is called an endothermic reaction.
ARTICLE:
When Olafur Eliasson and Frederik Ottesen heard that more than 1 billion people on Earth don’t have access to electricity, they wanted to help. In many places, lack of electricity means students can’t study after dark and families can’t cook after the sun goes down. It’s also harder for doctors and nurses to treat patients without good lighting. Eliasson and Ottesen decided to invent a solar lamp that would provide light without costing a lot of money, polluting the air, or causing fires.
Their solution? The Little Sun lamp is a sun-shaped light with a light bulb on one side and a solar panel on the other. The Little Sun lamp uses energy to provide light to people who need it, but the Little Sun doesn’t make its own energy. To run, the lamp needs to get energy from somewhere else. In this case, that source of energy is the sun. The solar panel on the back of the lamp converts light energy from the sun into potential energy that can be stored in a battery and used later to make the light bulb shine. Little Sun lamps charge in the sun during the day and provide light at night, allowing people to study, cook, work, and take care of other things even after the sun sets. They’re inexpensive, don’t pollute, and don’t cause fires.
questions: 2) How does the Little Sun Lamp help people around the world get light?
3) How does the Little Sun Lamp use energy from the sun to make the light bulb shine?
Answer:
got light to charge from the sun
Explanation:
they did it so that people don't pollute the ozone layer and thats why they invent that and it help them in every way
Calculate the number of moles in 400g of Tio2
Answer:
5.01 moles
Explanation:
Calculate the number of moles in 400g of Tio2
first, write the formulas correctly
Calculate the number of moles in 400g of TiO2
capitalize the first letter of your elements
the molar mass of TiO2 is
47.88 +2X16.00 =47.88 +32.00 = 79.88 gm/mole
(to 3 sig fig = 79.9 gm/mole
400 gm/79.9 gm/mole = 400/79.9 mole gm/gm =
400/79.9 moles = 5.01 moles
The molarity of an aqueous solution of CaCl is defined as the
Answer:
Molarity of aqueous solution of CaCl2 can be defined as moles of CaCl2 per litre of solution
Please help me ASAP I couldnt copy paste the table so I added a screenshot Please I really need help!!!
Answer:
2.04 Thermal Energy and Chemical Change Lab Report
Explanation:
what is a nucleus and what are the functions?
What is the mole ratio between FeCl3 and Fe(C5H7O3)3 ?
Answer: 162.2 g FeCl3. mL of soln = 0.07028 mol FeCl3x ... mol FeCl3 = mol Fe(OH)3 = 0.01291 mol ... (a) MaVa = MbVb since HCl and KOH react in a 1:1 molar ratio.
Explanation:
pls help i am in 8th grade k12
Answer:
zzxdczxc V
Explanation:
Aanlyze the potential energy diagram of the
reaction shown.
Which statements about the reaction are true?
Select all that apply.
The reaction is exothermic
The reaction is endothermic
The equation shows that 891 kJ of energy are
released as a product.
The equation shows that 891 kJ of energy are
absorbed as a reactant.
The graph shows that the reactants have greater potential energy than the products.
The answer is a,c,e
Answer:
A: The reaction is exothermic
C: The equation shows that 891 kJ of energy are released as a product.
E: The graph shows that the reactants have greater potential energy than the products.
Explanation:
The statement about the reaction is true:
A: The reaction is exothermic
C: The equation shows that 891 kJ of energy is released as a product.
E: The graph shows that the reactants have greater potential energy than the products.
What is potential energy?Potential energy is the energy that is saved in the body. It is used in the work and when convert into kinetic energy.
A moving item fundamentally possesses kinetic energy. Kinetic energy would therefore be created as a result of an object moving or an elastic band being released since the released object exhibits motion.
Therefore, the correct option is A: The reaction is exothermic, C: The equation shows that 891 kJ of energy is released as a product, and E: The graph shows that the reactants have greater potential energy than the products.
To learn more about potential energy, refer to the link:
https://brainly.com/question/15764612
#SPJ2
