The Earth orbits around the sun because the gravitational force that the sun
exerts on the Earth:
O A. causes Earth's acceleration toward the sun.
O B. is very small because the sun is so far from the Earth.
O c. is smaller than the force the Earth exerts on the sun.
O D. pushes the Earth away from the sun.

[tex]option \: (a) \: is \: correct.[/tex]

Explanation:

Yes, I was wrong. Pressure increases as the area decreases.

As per the Figure A, the truck is so heavy and having a greater mass. So, the area of contact between the tyres and the road increases and decreases it's pressure on the road due to the increase in area.

As per the Figure B, You know the nature of Tomato that it is soft and smooth to touch and also lighter mass when it's compared with the truck. As it having a lighter mass, it can be cut through the sharp knife. The area of contact decreases and pressure increases on the vegetables.

Answer:

Option number B

Explanation:

The pressure is indirectly proportional to the area therefore pressure decreases when the area increases, and pressure increases when the area decreases

Answer:

[tex]Q=50.3[/tex]

Explanation:

From the question we are told that:

Frequency [tex]F=330Hz[/tex]

Sound intensity drop [tex]I_d=2[/tex]

Time [tex]T=4s[/tex]

Therefore

Sound intensity Ratio

 [tex]\frac{I}{I_x}=\frac{1}{2}[/tex]

Generally the equation for Sound intensity is mathematically given by

 [tex]\frac{I}{I_x}=e^{-4\ \=t}[/tex]

 [tex]\frac{1}{2}=e^{-4\ \=t}[/tex]

 [tex]\=t =5.8s[/tex]

Generally the equation for Quality Factor is mathematically given by

 [tex]Q=2 \pi\frac{E}{\triangle E}[/tex]

 [tex]Q=2 \pi\frac{E}{\frac{E}{2*4}}[/tex]

 [tex]Q=50.3[/tex]

After half of a revolution ...

==> Distance = π•r

==> Displacement = 2•r

The question is incomplete, the complete question is;

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.

Answer:

It is incorrect because sodium phosphate is a compound that has a single composition

Explanation:

A compound is a neutral substance made up of two or more atoms which are chemically combined together.

Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.

Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.

Answer:

The law of momentum conservation can be stated as follows. For a collision occurring between object 1 and object 2 in an isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision.

Answer:

heuristic.

Explanation:

Psychology can be defined as the scientific study of both the consciousness and unconsciousness of the human mind such as feelings, emotions and thoughts, so as to understand how it functions and affect human behaviors in contextual terms.

This ultimately implies that, psychology focuses on studying behaviors and the mind that controls it.

A heuristic is an automatic mental shortcut or rule of thumb that avail people the opportunity to make quick and efficient judgement in decision-making process, as well as proffering solutions to a problem. Thus, it allows people to make decisions, pass probability judgement or proffer solutions to problem quickly and efficiently while applying minimal mental effort.

Basically, a heuristic helps an individual to shorten the decision-making time while paying less attention on thinking of his or her next course of action.

Hence, when you're advised to try working backward from the desired goal to the starting point or current state. This advice describes a heuristic.

Answer:

Average speed = 24 km/h

Explanation:

Given the following data;

Uniform speed A = 30 km/h

Uniform speed B = 20 km/h

To find the average speed;

Mathematically, the average speed of an object is given by the formula;

[tex] Average \; speed = \frac {total \; distance}{total \; time} [/tex] ..... equation 1

Total time = TA + TB

[tex] T_{A} = \frac {x}{30} [/tex]

[tex] T_{B} = \frac {x}{20} [/tex]

[tex] Total \; time = \frac {x}{30} + \frac {x}{20} [/tex]

[tex] Total \; time = \frac {5x}{60} [/tex]

Total distance = x + x

Total distance = 2x

Substituting the values into equation 1;

[tex] Average \; speed = \frac {2x}{\frac {5x}{60}} [/tex]

[tex] Average \; speed = \frac {2x*60}{5x} [/tex]

[tex] Average \; speed = \frac {120}{5} [/tex]

Average speed = 24 km/h

Answer:

[tex]f = m \frac{v1 - v2}{t} \\ = 120 \times \frac{25 - 5}{2} \\ = 120 \times \frac{20}{2} \\ = 120 \times 10 \\ = 1200N \\ thank \: you[/tex]

Answer:

1. 12 V

2a. R₁ = 4 Ω

2b. V₁ = 4 V

3a. A = 1.5 A

3b. R₂ = 4 Ω

4. Diagram is not complete

Explanation:

1. Determination of V

Current (I) = 2 A

Resistor (R) = 6 Ω

Voltage (V) =?

V = IR

V = 2 × 6

V = 12 V

2. We'll begin by calculating the equivalent resistance. This can be obtained as follow:

Voltage (V) = 12 V

Current (I) = 1 A

Equivalent resistance (R) =?

V = IR

12 = 1 × R

R = 12 Ω

a. Determination of R₁

Equivalent resistance (R) = 12 Ω

Resistor 2 (R₂) = 8 Ω

Resistor 1 (R₁) =?

R = R₁ + R₂ (series arrangement)

12 = R₁ + 8

Collect like terms

12 – 8 =

4 = R₁

R₁ = 4 Ω

b. Determination of V₁

Current (I) = 1 A

Resistor 1 (R₁) = 4 Ω

Voltage 1 (V₁) =?

V₁ = IR₁

V₁ = 1 × 4

V₁ = 4 V

3a. Determination of the current.

Since the connections are in series arrangement, the same current will flow through each resistor. Thus, the ammeter reading can be obtained as follow:

Resistor 1 (R₁) = 4 Ω

Voltage 1 (V₁) = 6 V

Current (I) =?

V₁ = IR₁

6 = 4 × I

Divide both side by 4

I = 6 / 4

I = 1.5 A

Thus, the ammeter (A) reading is 1.5 A

b. Determination of R₂

We'll begin by calculating the voltage cross R₂. This can be obtained as follow:

Total voltage (V) = 12 V

Voltage 1 (V₁) = 6 V

Voltage 2 (V₂) =?

V = V₁ + V₂ (series arrangement)

12 = 6 + V₂

Collect like terms

12 – 6 = V₂

6 = V₂

V₂ = 6 V

Finally, we shall determine R₂. This can be obtained as follow:

Voltage 2 (V₂) = 6 V

Current (I) = 1.5 A

Resistor 2 (R₂) =?

V₂ = IR₂

6 = 1.5 × R₂

Divide both side by 1.5

R₂ = 6 / 1.5

R₂ = 4 Ω

4. The diagram is not complete

Answer:

Explanation:

If the distance to the end of the road was 40 m, and she traveled back to where she started, she traveled a total distance of 80 m. It took her 100 seconds to travel the 80 m.

Based on the given distance-time graph, the number of seconds that Angela used to go to the end of the road and arrive back is 100 seconds.

The end of the road is 40m and coming back is also 40 m. The total distance is:

= 40 + 40

= 80m

The graph shows that to walk 80 meters, Angela took a 100 seconds because the line on the graph ends at 80 m and 100 seconds.

Find out more uses of distance-time graphs at https://brainly.com/question/13877898.

#SPJ6

Answer:

[tex]T=7.5*10^{-5}[/tex]

Explanation:

From the question we are told that:

Radius [tex]r=2cm[/tex]

Work done [tex]W=1.5×10^-4 joules[/tex]

Generally the equation for Work done is mathematically given by

 [tex]W=T.dA[/tex]

Therefore

 [tex]T=\frac{W}{dr}[/tex]

 [tex]T=\frac{1.5*10^{-4}}{2}[/tex]

 [tex]T=7.5*10^{-5}[/tex]

Answer: hi your question is incomplete  attached below is the complete question

answer :

magnitude of acceleration :  | a | = g = 9.81 m/s^2

direction : a = - g j

Explanation:

Neglecting Air resistance

magnitude of acceleration :

| a | = g = 9.81 m/s^2

Direction of acceleration

a = - g j  ( given that the direction of acceleration is against the acceleration due to gravity i.e. in the opposite direction )

Answer:

345 K

Explanation:

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.

Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Given the following data;

To convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;

Kelvin = 273 + °C

Substituting into the formula, we have;

Kelvin = 273 + 72

Kelvin = 345 K

Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.

Answer:

The correct option is a) 10 mph, 0 mph.

Explanation:

1. The average speed (S) is a magnitude given by:

[tex] S = \frac{D}{T} [/tex]  

Where:

D: is the total distance = 1 mi

T: is the total time = 6 min

[tex] S = \frac{D}{T} = \frac{1 mi}{6 min}*\frac{60 min}{1 h} = 10 mph [/tex]

Hence, the average speed is 10 mph.

2. The average velocity is a vector:

[tex] V = \frac{\Delta d}{\Delta t} = \frac{d_{f} - d_{i}}{t_{f} - t_{i}} [/tex]

Where:

[tex]d_{f}[/tex]: is the final distance                                    

[tex]d_{i}[/tex]: is the initial distance  

[tex]t_{f}[/tex]: is the final time                

[tex]t_{i}[/tex]: is the initial time

Since Juanita ran one mile around her school track, the final position is the same that the initial position, so the magnitude of the average velocity is zero.                                               

Therefore, the correct option is a) 10 mph, 0 mph.

I hope it helps you!          

Answer:200 Mpa

Explanation:

Given that diameter of cylinder = d = 1-25cm = 1.25 100 =0.0125m

Load or mass = m = Stress 0 = ? 2500kg

Solution: Formula N = F A

Area of Cross-section of cylinder = A=πr2 A = π(d/2) 2

= π(d2/4)

=(3.14)(0.0125)2/4

A = 1.226x10-4

F ・ mg = = F A 24500 2500 x 9.8 = 24500 N

1-226x10-4

1998 36 867.9

= 200 x 106 Pa

= 200 MPa

*Hope it helps you*

Good luck

Answer:

B. seafloor spreading

Explanation:

divergent motion between the Eurasian and North American, and African and South American Plates. ... In this way, as the plates move further apart new ocean lithosphere is formed at the ridge and the ocean basin gets wider

geological society

Answer: 2.43 s

Explanation:

Initial velocity is [tex]u=15.2\ m/s[/tex]

Final velocity [tex]v=23\ m/s[/tex]

Average acceleration is [tex]a_{avg}=3.2\ m/s[/tex]

Average acceleration is change in velocity in the given amount of time

[tex]\therefore a_{avg}=\dfrac{v-u}{t}\\\\\Rightarrow 3.2=\dfrac{23-15.2}{t}\\\\\Rightarrow t=\dfrac{7.8}{3.2}\\\\\Rightarrow t=2.43\ s[/tex]

Thus, 2.43 s is required to acquire that average acceleration with 23 m/s velocity .

Answer:

speed i uniform

Explanation:

if the speed is constant

Answer:

A

Explanation:

if it has a constant acceleration

Answer:

The answer is "[tex]1.01 \times 10^{-13}[/tex]"

Explanation:

Using the law of conservation for energy. Equating the kinetic energy to the potential energy.

[tex]KE=U=\frac{kqq'}{r}\\\\[/tex]

Calculating the closest distance:

[tex]\to r=\frac{kqq'}{KE}\\\\[/tex]

[tex]=\frac{k(2e)(79e)}{KE}\\\\=\frac{k(2)(79)e^2}{KE}\\\\=\frac{9.0\times 10^9 \ N \cdot \frac{m^2}{c}(2)(79)(1.6 \times10^{-19} \ C)^2}{(2.25\ meV) (\frac{1.6 \times 10^{-13} \ J}{1 \ MeV})}\\\\[/tex]

[tex]=\frac{9.0\times 10^9 \times 2\times 79\times 1.6 \times10^{-19}\times 1.6 \times10^{-19} }{(2.25 \times 1.6 \times 10^{-13}) }\\\\=\frac{3,640.32\times 10^{-29}}{3.6 \times 10^{-13} }\\\\=\frac{3,640.32}{3.6} \times 10^{-16}\\\\=1011.2 \times 10^{-16}\\\\=1.01 \times 10^{-13}[/tex]

Answer:

the tension of the rope is 34.95 N

Explanation:

Given;

length of the rope, L = 3 m

mass of the rope, m = 0.105 kg

frequency of the wave, f = 40 Hz

wavelength of the wave, λ = 0.79 m

Let the tension of the rope = T

The speed of the wave is given as;

[tex]v = f\lambda = \sqrt{\frac{T}{\mu} } \\\\where;\\\\\mu \ is \ mass \ per \ unit \ length\\\\\mu = \frac{0.105}{3} = 0.035 \ kg/m\\\\v = f\lambda = 40 \times 0.79 = 31.6 \ m/s\\\\v = \sqrt{\frac{T}{\mu} } \\\\v^2 = \frac{T}{\mu} \\\\T = v^2 \mu\\\\T = (31.6^2)(0.035)\\\\T = 34.95 \ N[/tex]

Therefore, the tension of the rope is 34.95 N

Answer:

Oort cloud

Explanation:

The large reservoir of comet nuclei far beyond Pluto, from which we believe new long-period comets come into the inner solar system, is called Oort cloud.

The comets hich have the large periods that means more than 200 years to orbit the Sun generaly comes from Oort cloud hich is also knon as the cometary cloud.

Answer:

0.4

Explanation:

A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.

From the lens formula;

1/f = 1/u+ 1/v

- 1/2 = 1/3 - 1/v

1/v = 1/3 + 1/2

v= 6/5

v= 1.2 cm

Magnification = image distance/object distance

Magnification = 1.2cm/3cm

Magnification = 0.4

Answer:

the force of resistance on the right team is 360 N

Explanation:

Given;

force of the left team, = 1000 N

total mass of the right team, m = 300 kg

acceleration of the right team, a = 1.2 m/s²

The force of resistance of the right team is calculated as;

Force = mass x acceleration

Force, F = 300 x 1.2

Force = 360 N

Therefore, the force of resistance on the right team is 360 N

Answer:

PE = 3.92x10^16J

potential energy

Explanation:

PE = m*g*h

mass of water = 1000kg/m³

(4*10^10m³)*1000kg = 4*10^13kg

PE = (4*10^13kg)*(9.81m/s²)*(100m)

PE = 3.92x10^16J

Explanation:

The Simple Pendulum. A simple pendulum is defined to have a point mass, also known as the pendulum bob, which is suspended from a string of length L with negligible mass ((Figure)). Here, the only forces acting on the bob are the force of gravity (i.e., the weight of the bob) and tension from the string.

hope it helps you

Answer:

F2 = 900 lbs

Explanation:

From pascal principle;

F1/A1 = F2/A2

Force on cylinder at left; F1 = 100 lbs

Diameter of cylinder at left; d1 = 2 inches

Diameter of cylinder at right; d2 = 6 inches

Formula for area of top of cylinder = πr²

Thus;

Area of top of left cylinder; A = π × 2² = 4π

Area of top of right cylinder; A = π × 6² = 36π

Thus;

100/4π = F2/36π

F2 = (36π × 100)/4π

F2 = 900 lbs

Solution :

When the spacecraft is at halfway point, the distance from the Earth as well as Mars are same. We have to account the masses of the planets. The gravitational force that is exerted by the Earth is greater because of its combined mass with the space probe.

The mass of Earth is greater than the mass of Mars. Therefore, the force of Earth is more than Mars.

Answer:

[tex] \rm 250000 \; cm^2 [/tex]

Explanation:

Refer to the attachment.