Three resistors (16 ohm, 16 ohm and 8 ohm) are connected in parallel. The equivalent
resistance (Re)

Answer:

B

Explanation:

because it take to the thought of a situation

Answer:

d i think

Explanation:

and are u using IXL???

Answer:

Explanation:

From the given information:

the car's momentum = momentum of the truck

∴

(a) 816 kg × v = 2650 kg × 16.0 km/h

v = (2650 kg × 16.0 km/h) /  816 kg

v = 51.96 km/hr

(b) 816 kg × v = 9080 kg × 16.0 km/h

v = (9080 kg × 16.0 km/h) /  816 kg

v = 178.04 km/hr

Answer:

the correct answer is C   v = 60 cm / s

Explanation:

The speed of a wave is related to the frequency and the wavelength

         v = λ f

They indicate that the object performs 20 oscillations every second, this is the frequency

         f = 20 Hz

the wavelength is the distance until the wave repeats, the distance between two consecutive peaks corresponds to the wavelength

         λ = 3 cm = 0.03 m

let's calculate

       v = 20 0.03

       v = 0.6 m / s

       v = 60 cm / s

the correct answer is C

Answer:

An electric current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space. It is measured as the net rate of flow of electric charge through a surface or into a control volume. ... In electric circuits the charge carriers are often electrons moving through a wire.

Answer:

The flow of moving electrons

Answer:

I = 15A

Explanation:

V = I*R

120V = I*8.0ohms

I = 120V/8.0ohms

I = 15A

Answer:

I=15A

Explanation:

you know what to do.

⣀⣠⣤⣤⣤⣤⢤⣤⣄⣀⣀⣀⣀⡀⡀⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄

⠄⠉⠹⣾⣿⣛⣿⣿⣞⣿⣛⣺⣻⢾⣾⣿⣿⣿⣶⣶⣶⣄⡀⠄⠄⠄

⠄⠄⠠⣿⣷⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣯⣿⣿⣿⣿⣿⣿⣆⠄⠄

⠄⠄⠘⠛⠛⠛⠛⠋⠿⣷⣿⣿⡿⣿⢿⠟⠟⠟⠻⠻⣿⣿⣿⣿⡀⠄

⠄⢀⠄⠄⠄⠄⠄⠄⠄⠄⢛⣿⣁⠄⠄⠒⠂⠄⠄⣀⣰⣿⣿⣿⣿⡀

⠄⠉⠛⠺⢶⣷⡶⠃⠄⠄⠨⣿⣿⡇⠄⡺⣾⣾⣾⣿⣿⣿⣿⣽⣿⣿

⠄⠄⠄⠄⠄⠛⠁⠄⠄⠄⢀⣿⣿⣧⡀⠄⠹⣿⣿⣿⣿⣿⡿⣿⣻⣿

⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠉⠛⠟⠇⢀⢰⣿⣿⣿⣏⠉⢿⣽⢿⡏

⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠠⠤⣤⣴⣾⣿⣿⣾⣿⣿⣦⠄⢹⡿⠄

⠄⠄⠄⠄⠄⠄⠄⠄⠒⣳⣶⣤⣤⣄⣀⣀⡈⣀⢁⢁⢁⣈⣄⢐⠃⠄

⠄⠄⠄⠄⠄⠄⠄⠄⠄⣰⣿⣛⣻⡿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡯⠄⠄

⠄⠄⠄⠄⠄⠄⠄⠄⠄⣬⣽⣿⣻⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⠁⠄⠄

⠄⠄⠄⠄⠄⠄⠄⠄⠄⢘⣿⣿⣻⣛⣿⡿⣟⣻⣿⣿⣿⣿⡟⠄⠄⠄

⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠛⢛⢿⣿⣿⣿⣿⣿⣿⣷⡿⠁⠄⠄⠄

⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠉⠉⠉⠉⠈⠄⠄⠄⠄⠄⠄

Give them the brain list.

Answer:

1. Friction enables us to walk freely.

2. It helps to support ladder against wall.

3. It becomes possible to transfer one form of energy to another.

4. Objects can be piled up without slipping.

Answer:

[tex]E=6.68\times 10^{-26}\ J[/tex]

Explanation:

Given that,

The frequency of FM ratio station, f = 100.8 MHz = 100.8 × 10⁶ Hz

We need to find the energy of the wave. We know that,

Energy, E = hf

Put all the values,

[tex]E=6.63\times 10^{-34}\times 100.8\times 10^6\\\\=6.68\times 10^{-26}\ J[/tex]

So, the energy of the wave is equal to [tex]6.68\times 10^{-26}\ J[/tex].

Explanation:

The weight of an object on the surface of the earth is equal to the gravitational force exerted by the earth on the object.

[tex]W=F_G[/tex]

[tex]mg = G \dfrac{mM}{R^2}[/tex]

which gives us an expression for the acceleration due to gravity g as

[tex]g = G\dfrac{M}{R^2}[/tex]

At a height h = R, the radius of a satellite's orbit is 2R. Then the acceleration due to gravity [tex]g_h[/tex] at this height is

[tex]mg_h = G \dfrac{mM}{(2R)^2}= G \dfrac{mM}{4R^2}[/tex]

Simplifying this, we get

[tex]g_h= G \dfrac{M}{4R^2} = \dfrac{1}{4} \left(G \dfrac{M}{R^2} \right) = \dfrac{1}{4}g[/tex]

Explanation:

Reaction quotient is defined as the ratio of the concentration of the products and reactants of a reaction at any point of time with respect to some unit. It is represented by the symbol Q.

The ratio of the concentration of products and reactants of a reaction in equilibrium with respect to some unit is said to be equilibrium constant expression. It is represented by the symbol K.

The relationship between Gibbs free energy change and reaction quotient of the reaction is:

[tex]\Delta G=\Delta G^o+RT ln Q[/tex]           ......(1)

where,

[tex]\Delta G[/tex] = Gibbs free energy change

[tex]\Delta G^o[/tex] = Standard Gibbs free energy change

R = Gas constant

T = Temperature

At equilibrium, the free energy change of the reaction becomes 0 and standard Gibbs free energy change can be related to the equilibrium constant by the equation:

[tex]\Delta G^o=-RT ln Q[/tex]           ...(2)

Answer:

A. liquid and solid

Explanation:

Solution :

Given expression :

[tex]$\mu_k$[/tex]mgcosθ = mgsinθ − ma

Here, g = 9.8 [tex]m/s^2[/tex] , a = 3.60 [tex]m/s^2[/tex] , θ = 27°

Therefore,

[tex]$\mu_k mg \cos \theta = mg \sin \theta - ma$[/tex]

[tex]$\mu_k mg \cos \theta = m(g \sin \theta - a)$[/tex]

[tex]$\mu_k g \cos \theta = (g \sin \theta - a)$[/tex]

[tex]$\mu_k =\frac{(g \sin \theta-a)}{g \cos \theta}$[/tex]

Mow calculating the coefficient of kinetic friction as follows :

[tex]$\mu_k=\frac{g \sin \theta-a}{g \cos \theta}$[/tex]

[tex]$\mu_k=\frac{9.8 \times \sin 27^\circ-3.60}{9.8 \times \cos 27^\circ}$[/tex]

[tex]$\mu_k=0.097$[/tex]

Answer:

The answer is c

Thermal energy moves within the air from the flames to the marshmallow.

Explanation:

Hope it helps

You sit with friends around a campfire, roasting marshmallows. then the transfer of thermal energy involved in this system is an example of radiation Thermal energy moves within the air from the flames to the marshmallow. Hence option C is correct.

In physics and engineering, the phrase "thermal energy" is thrown around in a lot of different situations. It can relate to a variety of distinct physical notions. Included in this are the internal energy, or enthalpy, of a body of matter and radiation; heat, which is a form of energy transfer (as is thermodynamic work); and the characteristic energy of a degree of freedom in a system described in terms of its microscopic particulate constituents (where T denotes temperature and k denotes the Boltzmann constant.

Hence option C is correct.

To know more about Energy :

https://brainly.com/question/1932868

#SPJ2.

Answer:

9.965 nF

Explanation:

The capacitance of the axon C = εA/d where ε = dielectric constant = 24.78 × 10⁻¹² F/m, A = surface area of axon = 2πrL where r = radius of axon = 8 μm = 8 × 10⁻⁶ m and L = length of axon = 8 cm = 8 × 10⁻² m and d = thickness of membrane = 0.01 μm = 0.01 × 10⁻⁶ m

So, C = εA/d

C = ε2πrL/d

Substituting the of the values variables into the equation, we have

C = ε2πrL/d

C =  24.78 × 10⁻¹² F/m × 2π × 8 × 10⁻⁶ m × 8 × 10⁻² m/0.01 × 10⁻⁶ m

C =  9964.63 × 10⁻²⁰ Fm/0.01 × 10⁻⁶ m

C =  996463 × 10⁻¹⁴ F

C = 9.96463 × 10⁻⁹ F

C = 9.96463 nF

C ≅ 9.965 nF

Answer:

A) 3.367 × 10^(-6)

B) 2.97 × 10^(7) N/C

C) Upwards

Explanation:

We are given;

Mass of bee; m = 100 mg = 100 × 10^(-6) kg

Charge on bee;q=33 pC = 33 × 10^(-12)C

Electric field strength; E = 100 N/C

A) Formula for weight of bee; W = mg = 100 × 10^(-6) × 9.8 = 9.8 × 10^(-4) N

Electric force on Bee; F = qE = 33 × 10^(-12) × 100 = 33 × 10^(-10) N

ratio of the electric force on the bee to the bee's weight; F/W = (33 × 10^(-10))/(9.8 × 10^(-4)) = 3.367 × 10^(-6)

B) For the bee to be suspended in the air, it means the weight of the bee must be equal to the electric force. Thus;

mg = qE

100 × 10^(-6) × 9.8 = 33 × 10^(-12) × E

E = (100 × 10^(-6) × 9.8)/(33 × 10^(-12))

E = 2.97 × 10^(7) N/C

C) From Newton's law, sum of forces = 0.

Thus;

F_n + F + W = 0

Where F is the normal force.

Thus;

F_n = -(F + W)

F_n = - ((33 × 10^(-10)) + (9.8 × 10^(-4)))

F_n = -9.8 × 10^(-4) N

Thus, applied electric field is;

E_a = F_n/q = (-9.8 × 10^(-4))/(33 × 10^(-12)) = -2.97 × 10^(7) N/C

This is negative and so it means the direction will be opposite the Earth's electric filed which is upwards.

Answer:

belpw

Explanation:

The distance prior to the sliding friction dispersing her energy would be:

- The distance will remain unaffected by the sliding friction i.e. 354m

As we know, When Sliding friction dissolves her energy, leading her Kinetic Energy to turn 0 on coming to the state of rest. So,

[tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]            (∵ Work in -ve denotes it is done opposite to friction)

Given that,

m(mass) [tex]= 50 kg[/tex]

v(velocity) [tex]= 30 km/hr[/tex] or [tex]8.33 m/s[/tex]

The coefficient of Kinetic Friction [tex]= 0.01[/tex]

g(gravitational force) [tex]= 9.8 m/s^2[/tex]

Initial Velocity(u) [tex]= 30[/tex] × [tex]1000/3600 m/s[/tex]

[tex]= 8.33 m/s[/tex]

Now by employing the provided values,

[tex]F =[/tex] μ[tex]mg[/tex]

[tex]= (0.01) (50) (9.8)[/tex]

[tex]= 4.9[/tex]

∵ [tex]F = 4.9 N[/tex]

By using the above expression, we will find the distance;

[tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]

⇒ [tex]1/2 (50) (0)^2 - 1/2 (50) (8.33)^2 = -4.9(S)[/tex]

⇒ [tex]1734.7225 = 4.9S[/tex]

⇒ [tex]S = 1734.7225/4.9[/tex]

∵ [tex]S = 354 m[/tex]

Because [tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]  [tex]= -[/tex] μmgS

⇒ [tex]S = (u^2 - v^2)[/tex]/2μ[tex]g[/tex]

Thus, the distance will remain unaffected by the sliding friction i.e. 354m

Learn more about "Friction" here:

brainly.com/question/2122951

Maximum horizontal force that can be applied on the box is 300.32 N.

Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.

Kinetic friction is defined as the opposing force exerted by the surface on an object in contact with it, when there is relative motion between the two surfaces.

Here,

Mass of the box, m = 150 lb = 68.1 kg

Coefficient of kinetic friction, μ = 0.45

Maximum horizontal force that can be applied on the box is the kinetic frictional force. Frictional force,

F(k) = μmg

F(k) = 0.45 x 68.1 x 9.8

F(k) = 300.32 N

Now, the box sits on a ramp inclined at 60°

Coefficient of kinetic friction, μ = 0.45

The net force here acting on the box placed in the ramp is due to the kinetic frictional force and the weight of the box.

So,

Frictional force, F(k)' = μmgcosθ

F(k)' = 0.45 x M x 9.8 x cos 60

F(k)' = 2.2M

Weight of the box acting horizontally,

W = Mgsinθ

W = M x 9.8 x sin60

W = 8.5M

Therefore, net force,

Fn = W - F(k)'

Fn = 8.5M - 2.2M

Fn = 6.3M

The total force acting on the box is

F = F(k) - Fn

ma = 300.32 - 6.3M

Since, the box is moving with constant speed, the acceleration, a = 0

Therefore,

300.32 - 6.3M = 0

6.3M = 300.32

M = 300.32/6.3

M = 47.7 kg = 105.16 pound

Hence,

Maximum horizontal force that can be applied on the box is 300.32 N.

Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.

To learn more about kinetic friction, click:

https://brainly.com/question/29100737

#SPJ2

Air is classified as a mixture. Option D is the correct answer.

Air is a combination of different gases, primarily nitrogen (about 78%), oxygen (about 21%), and small amounts of other gases such as carbon dioxide, argon, and trace elements. These gases are not chemically bonded to each other, but rather exist together in the same space. Option D is the correct answer.

In a mixture, the substances involved retain their individual properties and can be separated by physical means. This is true for air as well. The gases in air can be separated through processes like fractional distillation or filtration. It's important to note that air also contains other components such as water vapor, dust particles, and pollutants, which can vary in concentration depending on the location and environmental conditions. These components further contribute to the complex nature of air as a mixture.

Learn more about Air here:

https://brainly.com/question/636295

#SPJ2

Answer:

Gravitational potential energy is mass of the object times the gravitational constant times the height of the object:

U = mgh (I will use 10 for the gravitational constant but you can use 9.8 or 9.81 or something even more accurate)

U = 280

The gravitational potential of the object is 280 joules

Answer: A 10,000-Hz sound is 10 times more intense as compared to a 1000-Hz sound to be perceived as equal to 60 phons of loudness.

Explanation:

The formula used is as follows.

[tex]\beta = 10 dB log (\frac{I}{I_{o}})\\60 = 10 dB log (\frac{I}{I_{o}})[/tex]

[tex]I_{o} = 10^{-12}[/tex] normal threshold

The difference is sound level is as follows.

60 - 60 = 0

Hence,

[tex]0 = 10 dB [log (\frac{I_{f}}{I_{o}}) - log (\frac{I_{i}}{I_{o}})]\\log (\frac{1000}{I_{o}}) = log (\frac{10000 x}{I_{o}})\\log (10^{15}) = log (10^{16}x)\\15 = 16 + log x\\log x = 1\\x = 10[/tex]

This means that 10,000 Hz sound is 10 times more intense.

Thus, we can conclude that a 10,000-Hz sound is 10 times more intense as compared to a 1000-Hz sound to be perceived as equal to 60 phons of loudness.

Answer:

(a) 1470 N/m

(b) 48.2 m

Explanation:

Applying,

(a) F = ke.................... Equation 1

Where F = force applied to the spring, k = spring constant, e = extension

make k the subject of the equation

k = F/e............... Equation 2

But,

F = mg............. Equation 3

Where m = mass, g = acceleration due to gravity

Substitute equation 3 into equation 2

k = mg/e.............. Equation 4

From the question,

Given: m = 6 kg, e = 42-38 = 4 cm = 0.04 m

Constant: g = 9.8 m/s²

Substitute these values into equation 4

k = (6×9.8)/0.04

k = 1470 N/m

(b) Consider the end of the spring to the left which exert a force to the right

Then,

e = F/k............. Equation 5

Given: F = 150 N, k = 1470 N/m

Substitute these values into equation 5

e = 150/1470

e = 0.102 m

Hence the length of the spring is

L = 0.38+0.102 = 0.482 cm = 48.2 m

Answer:

the largest distance we can measure is 10¹⁴ km

Explanation:

Given the data in the question;

Threshold hearing = 10⁻²⁰

smallest distance measured = 1 mm

Largest distance measured will be;

⇒ ( threshold hearing )⁻¹ × smallest distance

= ( 1 / 10⁻²⁰ ) × 1 mm

= 10²⁰ × 1mm

= 10²⁰ mm

we know that; 1000 mm = 10⁶ km

Largest distance = ( 10²⁰ / 10⁶ ) km

= 10¹⁴ km

Therefore, the largest distance we can measure is 10¹⁴ km

Answer:

[tex]{ \tt{initial \: velocity, \: u = 0}} \: (at \: rest) \\ { \tt{final \: velocity, \: v = 15 { {ms}^{ - 1} }}} \\ { \tt{time, \: t = 6s}} \\ { \bf{from \: first \: newtons \: equation \: of \: motion : }} \\ { \bf{v = u + at}} \\ { \tt{15 = 0 + (a \times 6)}} \\ { \tt{6a = 15}} \\ { \tt{acceleration, \: a = 2.5 \: {ms}^{ - 2} }}[/tex]

Answer:

Mercury - 800°F (430°C) during the day, -290°F (-180°C) at night. Venus - 880°F (471°C) Earth - 61°F (16°C) Mars - minus 20°F (-28°C)30-Jan-2018

Answer:

The surface tension is 190.2 N/m.

Explanation:

Initial radius, r = 4 cm

final radius, r' = 6 cm

Work doen, W = 15 J

Let the surface tension is T.

The work  done is given by

W = Surface Tension x change in surface area

[tex]15 = T \times 4\pi^2(r'^2 - r^2)\\\\15 = T \times 4 \times 3.14\times 3.14 (0.06^2- 0.04^2)\\\\15 = T\times 0.0788\\\\T = 190.2 N/m[/tex]

Answer:Increasing

Explanation:

Given

Car is driven on the straight road with  instantaneous acceleration in the direction of car's motion.

If instanateneous acceleration is constant then speed of car is increasing at a constant pace. As there are no turns on the road, therefore speed of car is increasing.

The speed of the car is "decreasing". A further description is provided in the below paragraph.

Thus the above answer is correct.

Learn more about the speed here:

https://brainly.com/question/5053192

Answer:

1. Carpenter

2. True

Explanation:

While a mason was working concrete into the formwork, the formwork collapses. The best person to rectify this problem is CARPENTER.

This is because it is the job of the Carpenter to design and build formwork, most especially wooden formwork. Formwork is like casing built to receive concrete and reinforcement during construction. Hence, when formwork collapses either due to stress, tension, or improper construction, it is the job of Carpenter to reconstruct the formwork or rectify the problem.

It is TRUE that when a device made in a workplace had defects. To address this issue the workshop manager should communicate directly with the workshop​. However, this communication will be an instruction on what to do next, and it usually directs those responsible to take action where necessary. For example, a workshop manager communicates to a carpenter about the need to rectify a chair or table that has a defect.

Answer:

The range of the photon energies is between:

2.652 x 10⁻²⁵ J    to    4.973 x 10⁻²⁵ J

Explanation:

The energy of a photon is calculated using the following equation;

E = hf

where;

h is Planck's constant = 6.63 x 10⁻³⁴ Js

f is frequency of the photon

[tex]E = h \frac{c}{\lambda} \\\\where;\\\\\lambda \ is \ the \ wavelength\\\\c \ is \ the \ speed \ of \ light \ = 3\times 10^8 \ m/s\\\\When \ \lambda = 400 \ mm = 400 \ \times 10^{-3} \ m\\\\E = \frac{(6.63 \times 10^{-34})(3\times 10^8)}{400 \times 10^{-3}} \\\\E = 4.973 \times 10^{-25} \ J[/tex]

[tex]When \ \lambda = 750 \ mm = 750 \ \times 10^{-3} \ m\\\\E = \frac{(6.63 \times 10^{-34})(3\times 10^8)}{750 \times 10^{-3}} \\\\E = 2.652 \times 10^{-25} \ J[/tex]

The range of the photon energies is between:

2.652 x 10⁻²⁵ J    to    4.973 x 10⁻²⁵ J