By December 31, 2003, concerns over arsenic contamination had prompted the manufacturers of pressure-treated lumber to voluntarily cease producing lumber treated with CCA (chromated copper arsenate) for residential use. CCA-treated lumber has a light greenish color and was widely used to build decks, sand boxes, and playground structures.

Required:
Draw the Lewis structure of the arsenate ion (ASO4^3-) that yields the most favorable formal charges.

Answer:

pH of the solution is 2.0

Explanation:

The lactic acid is a weak acid that is in equilibrium with water as follows:

Lactic acid + H2O ⇄ Lactate + H₃O⁺

And Ka for lactic acid: 1.38x10⁻⁴

Ka = 1.38x10⁻⁴ = [Lactate] [H₃O⁺] / [Lactic acid]

Initial concentration of lactic acid is (MW: 112.06g/mol):

80g * (1mol / 112.06g) / 1L = 0.714M

The equilibrium concentration of the species in the equilibrium are:

[Lactate] = X

[H₃O⁺] = X

[Lactic acid] = 0.714-X

Replacing in Ka expression:

1.38x10⁻⁴ = [X] [X] / [0.714-X]

9.8532x10⁻⁵ -  1.38x10⁻⁴X = X²

9.8532x10⁻⁵ -  1.38x10⁻⁴X - X² = 0

Solving for X:

X = -1.0x10⁻². False solution, there is no negative concentrations

X = 9.86x10⁻³M. Right solution.

As [H₃O⁺] = X

[H₃O⁺] = 9.86x10⁻³M

and pH = -log [H₃O⁺] = -log 9.86x10⁻³M

pH = 2.0

Answer: Km = 10μM

Explanation: Michaelis-Menten constant (Km) measures the affinity a enzyme has to its substrate, so it can be known how well an enzyme is suited to the substrate being used. To determine Km another value associated to an eznyme is important: Turnover number (Kcat), which is the number of time an enzyme site converts substrate into product per unit time.

Enzyme veolcity is calculated as:

[tex]V_{0} = \frac{E_{t}.K_{cat}.[substrate]}{K_{m}+[substrate]}[/tex]

where Et is concentration of enzyme catalitic sites and has to have the same unit as velocity of enzyme, so Et = 20nM = 0.02μM;

To calculate Km:

[tex]V_{0}*K_{m} + V_{0}*[substrate] = E_{t}.K_{cat}.[substrate][/tex]

[tex]K_{m} = \frac{E_{t}.K_{cat}.[substrate]-V_{0}*[substrate]}{V_{0}}[/tex]

[tex]K_{m} = \frac{0.02*600*40-9.6*40}{9.6}[/tex]

Km = 10μM

The Michaelis-Menten for the substrate SAD is 10μM.

Answer:

The correct answer is 0.25 atm.

Explanation:

As mentioned in the given question that the chamber comprises equal molar concentrations of He, Ne, Ar and Kr gas. So, let us assume that the moles of all the gases will be x then the total number of moles will be 4x.  

The formula for calculating mole fraction is,  

Mole fraction = mole of the substance/total moles  

The mole fraction of Kr = x/4x = 0.25

The total pressure given in the chamber is 1 atm. Therefore, the partial pressure will be,  

Partial pressure = mole fraction * Total pressure

Partial pressure = 0.25 * 1 = 0.25 atm.  

The partial pressure of Kr is 0.25 atm.

We are told that there is an equal molar amounts of He, Ne, Ar, and Kr. If we decide to say, let the molar amount of each gas be x, the total number of moles  of all the gases will now be; x + x+ x + x = 4x

Let us recall that partial pressure of a gas can be obtained form the formula;

Partial pressure = mole fraction × total pressure

Mole fraction of Kr = x/4x = 1/4

Total pressure = 1 atm

Partial pressure of Kr = 1/4 × 1 = 0.25 atm

Learn more: https://brainly.com/question/2510654

Answer:

[tex]M_{base}=0.709M[/tex]

Explanation:

Hello,

In this case, since the reaction between potassium hydroxide and nitric acid is:

[tex]KOH+HNO_3\rightarrow KNO_3+H_2O[/tex]

We can see a 1:1 mole ratio between the acid and base, therefore, for the titration analysis, we find the following equality at the equivalence point:

[tex]n_{acid}=n_{base}[/tex]

That in terms of molarities and volumes is:

[tex]M_{acid}V_{acid}=M_{base}V_{base}[/tex]

Thus, solving the molarity of the base (KOH), we obtain:

[tex]M_{base}=\frac{M_{acid}V_{acid}}{V_{base}} =\frac{0.498M*42.7mL}{30.0mL}\\ \\M_{base}=0.709M[/tex]

Regards.

Answer:

The reaction given is:

In (g) + H₂ (g) ⇔ InH₂ (g), the Kp is 1.48 at 973 K.

The partial pressures measured in the reaction vessel is Partial pressure of In is 0.0540 atm, partial pressure of H₂ is 0.0250 atm, and the partial pressure of InH₂ is 0.0780 atm. By using the table given in the attachment below, the value of PInH₂ is (0.078-x), PIn is (0.054 + x), and the value of PH2 is (0.025 + x).

Kp = PInH₂/PIn × PH₂ = (0.078 - x) / (0.054 +x) (0.025 + x)

1.48 = (0.078 - x) / (0.054 +x) (0.025 + x)

x = 0.06689

Now the partial pressures of In, H₂ and InH₂ will be,

PH₂ = 0.025 + x = 0.025 + 0.0668 = 0.0918 atm

PIn = 0.054 + 0.0668 = 0.1208 atm

PInH₂ = 0.078 - 0.0668 = 0.0112 atm

Now the Qp or the reaction quotient will be,

Qp = (0.078) / (0.054) (0.025) = 57.78.

Answer:

B. NH3 < PH3< CH4

Explanation:

Hello,

In this case, taking into account that the boiling point of ammonia, methane and phosphorous trihydrate are -33.34 °C , -161.5 °C  and -87.7 °C , clearly, methane has the lowest boiling point (most negative) and ammonia the greatest boiling point (least negative), therefore, ranking is:

B. NH3 < PH3< CH4

Best regards.

Answer:

Atomic mass = 127.198 amu

Explanation:

The average atomic mass is obtained by summing the masses of the isotopes each multiplied by its abundance.

Atomic mass = (97.62 * 0.0825) + (109.3 * 0.2671) + (138.3 * 0.6504)

Atomic mass = 8.05365 +  29.19403 + 89.95032

Atomic mass = 127.198 amu

Answer:

[tex]T_b=-88.48\°C[/tex]

Explanation:

Hello,

In this case, since the entropy of vaporization is defined in terms of the enthalpy of vaporization and the boiling point of the given substance, nitrous oxide, as shown below:

[tex]\Delta _{vap}S=\frac{\Delta _{vap}}{T_b}[/tex]

Solving for the boiling point of nitrous oxide, we obtain:

[tex]T_b=\frac{\Delta _{vap}H}{\Delta _{vap}S}=\frac{16.53\frac{kJ}{mol}*\frac{1000J}{1kJ} }{89.51\frac{J}{mol} } \\ \\T_b=184.67K[/tex]

Which in degree Celsius is also:

[tex]Tb=184.67-273.15\\\\T_b=-88.48\°C[/tex]

Best regards.

The element which can not loose electron easily and having electronagtive character is called non-metal it has following property-1. it can not conduct heat and electricity1. it is netiher ductile not malleable3. it is not lsuturous and also not sonorous

Answer:

Non-metals are the elements which form negative ions by accepting or gaining electrons. Non-metals usually have 4, 5, 6 or 7 electrons in their outermost shell. Non-metals are those which lack all the metallic attributes. They are good insulators of heat and electricity. They are mostly gases and sometimes liquid.

Answer:

4.84g of FeO is the theoretical yield

Explanation:

The Iron, Fe(s), reacts with oxygen, O₂(g), producing Iron (II) oxide, as follows:

2Fe(s) + O₂(g) → 2FeO

Theoretical yield is the yield of a reaction in which you assume the 100% of reactants is converted in products.

To find theoretical yield we need to find moles of Iron, and, knowing 2 moles of Fe produce 2 moles of FeO (Ratio 1:1), we can find theoretical yield of FeO as follows:

Moles Fe (Molar mass: 55.845g/mol)

Using the molar mass of the compound we can convert grams to moles, thus:

3.76g Fe × (1mol / 55.845g) = 0.0673 moles of Fe

Moles and mass of FeO

As there are in reaction 0.0673 moles Fe, assuming a theoretical yield (And as ratio of the reaction is 1:1), you will obtain 0.0673 moles of FeO.

Theoretical yield is given in grams, As molar mass of FeO is 71.844g/mol, theoretical yield of the reaction is:

0.0673 moles FeO × (71.844g / mol) =

Answer:

B) hydroxide concentration

Explanation:

Hello,

In this case, since we are talking about strong both base and acid, since the base is the titrant and the acid the analyte, once the equivalence point has been reached, some additional base could be added before the experimenter realizes about it, therefore, since the titrant is a strong base, it completely dissociates in hydroxide ions and metallic ions which allows us to compute the pOH of the solution by known the hydroxide ions concentration.

After that, due to the fact that the pH is related with the pOH as shown below:

pH=14-pOH

We can directly compute the pH.

Best regards.

Answer:

one bond between nitrogen and hydrogen and a double bond between the nitrogen atoms.

Explanation:

H-N=N-H

Answer: D - 126.4g

Explanation:  

% Yield = Actual Yield/Theoretical Yield

38% = Actual Yield/332.5

38/100 = Actual Yield/332.5

(.38)(332.5) = 126.35 g = 126.4 g Actual Yield

Answer:

is D. the correct answer

Explanation:

I'm not sure if it is. Please let me know if I'm mistaking.

Answer:

Explanation:

The equation for the decay is given as;

¹⁴₆C  --> X + ⁰₋₁e

For conservation of matter, the mass number and atomic number has to be the same in both the reactant and product side f he equation;

Mass number;

14 = x + 0

x = 14

Atomic Number;

6 = x + (-1)

x = 6 + 1 =7

¹⁴₆C  --> ¹⁴₇N + ⁰₋₁e

The name of the product nuclide with atomic number of 7 is Nitrogen. The symbol is; ¹⁴₇N

Answer:

To calculate the [OH-] in the solution we must first find the pOH

That's

pH + pOH = 14

pOH = 14 - pH

First to find the pH we use the formula

From the question

[H3O+]= 2.6 × 10^-8 M

pH = - log 2.6 × 10^-8

pH = 7.6

pH = 8

So we pOH is

pOH = 14 - 8 = 6

To find the [OH-] we use the formula

6 = - log [OH-]

Find antilog of both sides

The solution is slightly basic since it's pH is in the basic region and slightly above the neutral point 7

Hope this helps you

Answer:

The sun

Explanation:

The sun is the primary source of energy in most living communities. The producers or the green plants that prepare their own food by the use of sunlight and other natural resources. Carbon dioxide, water, and other minerals are used by the plants to make their food in the presence of chlorophyll. Plants are then consumed by the consumers. This chain helps in forming the food chain and the food web.

Answer:

This is due to the water moisture present in the recovered sample.

Explanation:

The total amount of material recovered isn’t meant to weigh more than the original sample. However when this happens then it means there is the presence of water moisture in the recovered sample.

The recovered samples however needs to be heated to make it dry and eliminate the water moisture through evaporation.

Answer:

(D) The reaction cannot take place in a single elementary step

Explanation:

Statements are:

(A) The time it takes for [CH3I] to decrease to 0.005 M is independent of [N3-], as long as [N3] >> [CH3I].

B) If the initial concentrations of azide and CH3I are equal, then it takes half as long for [CH3I] to decrease to 0.005 M as it does for it to decrease from 0.005 M to 0.0025 M.

(C) The reaction rate is significantly smaller if excess I- is added to the solution.

(D) The reaction cannot take place in a single elementary step.

The rate of the reaction is:

rate = k[CH3I][N3–].

That means rate depends of concentration of CH₃I as much as N₃⁻ concentration

(A) The time it takes for [CH3I] to decrease to 0.005 M is independent of [N3-], as long as [N3] >> [CH3I]. FALSE. The reaction rate depends of N₃⁻ as much as CH₃I

B) If the initial concentrations of azide and CH3I are equal, then it takes half as long for [CH3I] to decrease to 0.005 M as it does for it to decrease from 0.005 M to 0.0025 M. FALSE. Reaction is second-order. Half-life is 1/K[A]₀. If initial concentration is 0.1M, to a concentration of 0.005M it takes:

1/K*0.1. If initial concentration is 0.005M it takes 1/K*0.005. That means it takes half to decrease from 0.005M to 0.0025 as it does for it to decrease from 0.01M to 0.005M.

(C) The reaction rate is significantly smaller if excess I- is added to the solution. FALSE. Reaction rate is independent of I⁻

(D) The reaction cannot take place in a single elementary step. TRUE. As this reaction is a single-replacement reaction implies the formation  of 1 C-N bond. But also the rupture of the C-I bond is impossible to explain this kind of reaction in a single elementary step.

Answer:

-170.65

188.8+ 256.8-205.8-(2x205.2)

-170.65 is the entropy change.

Entropy trade is the phenomenon that is the measure of change of disorder or randomness in a thermodynamic gadget. It is associated with the conversion of heat or enthalpy completed in work. A thermodynamic device that has extra randomness means it has high entropy.

Subtract the sum of the absolute entropies of the reactants from the sum of the absolute entropies of the products, each extended by using their suitable stoichiometric coefficients, to reap ΔS° for the reaction.

Learn more about entropy change here: https://brainly.com/question/14257064

#SPJ2

Answer:

glue that would make the strongest craft stick tower.

Explanation:

Independent variable: In statistics and research methods, the term "independent variable" is determined as a variable that is being changed, controlled, or altered in an experiment or research by the researcher or the experimenter to see its effect on DV or dependent variable. However, it is said that independent variable directly effect the dependent variable.

Answer:

[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]

Explanation:

Let recall the crystal structure of CsBr obtains a BCC structure. In a BCC structure, there exist only two atom per cell.

The density d of CsBr in g/cm³ can be calculated by using the formula:

[tex]\mathtt{ density \ d = \dfrac{z \times molar\ mass \ (M)}{ edge \ length \ (a) \ \times avogadro's \ number \ (N)}}[/tex]

where;

z = 1 mole of CsBr

edge length = 428.7 pm = (4.287 × 10⁻⁸)³ cm

molar mass of CsBr = 212.81 g/mol

avogadro's number = 6.023 × 10²³

[tex]\mathtt{ density \ d = \dfrac{1 \times 212.81}{(4.287 \times 10^{-8})^3 \times 6.023 \times 10^{23}}}[/tex]

[tex]\mathtt{ density \ d = \dfrac{ 212.81}{47.4540533}}[/tex]

[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]

The total kinetic energy of a body is known as Thermal energy. Option A

Thermal energy is the direct sum of all the available random kinetic energies of molecules.

Also note that thermal energy is directly proportional to temperature in Kelvin.

Thus, the total kinetic energy of a body is known as Thermal energy. Option A

Learn more about thermal energy here:

https://brainly.com/question/19666326

#SPJ1

Answer:

A.) Thermal energy

Explanation:

I got it correct on founders edtell

Explanation:

Entropy refers to the degree of disorderliness of a system.

a. A snowman melts on a spring day.

Entropy is increasing because there is a change in state of matter from solid to liquid. Liquid particles have more freedom f movement compared to solids.

b. A document goes through a paper shredder.

Entropy increases because random, disorganized bits of paper are left.

c. A water bottle cools down in a refrigerator.

Entropy  decreases because temperature is directly proportional to entropy.

d. Silver tarnishes

Entropy increases because random bits of the sliver particles are formed.

e. Dissolved sugar precipitates out of water to form rock candy.

Entropy decreases because the random dissolved sugar precipitates are ordered into a rock candy.

Answer:

68%

Explanation:

Since we need a percentage we can use any number we want for our initial value.

5(1/2)^900/1620 = 3.40

(3.40 / 5)*100 = 68%

To make sure lets use a different initial amount

1(1/2)^900/1620 = 0.68

(0.68/1) * 100 = 68%

To solve this question, we'll assume the initial amount of radium-226 to be 1.

Now, we shall proceed to obtaining the percentage of radium-226 that will after 900 years. This can be obtained as illustrated below:

Determination of the number of half-lives that has elapsed.

Half-life (t½) = 1620 years

Time (t) = 900 years

[tex]n = \frac{t}{t_{1/2}}\\\\n = \frac{900}{1620}\\\\n = \frac{5}{9}[/tex]

Determination of the amount remaining

Initial amount (N₀) = 1

Number of half-lives (n) = 5/9

[tex]N = \frac{N_{0} }{2^{n}}\\\\N = \frac{1}{2^{5/9}}[/tex]

Determination of the percentage remaining.

Initial amount (N₀) = 1

Amount remaining (N) = 0.68

Percentage remaining = N/N₀ × 100

Percentage remaining = 0.68/1 × 100

Therefore, the percentage amount of radium-226 that remains after 900 years is 68%

Learn more: https://brainly.com/question/10406952

Answer:

Neutral

Explanation:

pKa of acid = -log Ka

                   = -log (1.8 x 10^-5)

                  = 4.74

pKb of base = -log Kb

                      = 4.74

pKa of acid = pKb of base

salt pH formula   : pH = 7 + 1/2 [pKa -pKb ]

here pKa = pKb

so pH = 7

the salt it is CH3COONH4 exactly neutral solution .

If a salt is formed by combining NH₃ (Kb=1.8×10⁻⁵) and CH₃COOH (Ka=1.8×10⁻⁵), an aqueous solution of this salt would be neutral.

pH of any solution tells about the acidity or basicity or neutral nature of the solution.

pH of any solution is directly proportional to the acid dissociation constant value (Ka) and base dissociation constant (Kb). In the question it is given that,

Value of Kb for NH₃ = 1.8×10⁻⁵

Value of Ka for CH₃COOH =  1.8×10⁻⁵

Ka & Kb values for the base and acid is same means it dissociates with same extent. So the aqueous solution of this acid and base is a neutral in nature as they have same number of acid and base ions in it.

Hence resultant solution will be a neutral solution .

To know more about neutral solution, visit the below link:

https://brainly.com/question/13805901

Answer:

a. NCl3

Explanation:

All the elements stated are non metals. Generally the bond between non metals is a covalent bond. However depending on how the electrons are shared, this bond can either be polar or non polar.

A non polar covalent bond is formed when the electrons are shared equally between the atoms.

A way to determine if a bond is non polar or polar covalent is by comparing the electronegativity values.

If the electronegativity difference is less than 0.5, it is regarded as a non polar covalent bond.

Going back to the question;

Between N and Cl; the electronegativity difference is 3.0 - 3.0 = 0

Between Cl and O; the electronegativity difference is 3.5 - 3.0 = 0.5

Between Cl and P; the electronegativity difference is 3.5 - 2.1 = 1.4

From these we can tell that the correct option is option A.

Answer:

atagcca

Explanation:

t goes with a, and c goes with g

atagcca matches with

ta tcggt

Explanation:

C5H10O2 + NaOH = C2H5COONa + C2H5OH

your result are : sodium propanoate and ethanol

A balanced chemical equation represents atoms and their numbers with their charge. The balanced equation for base hydrolysis is C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH.

Base hydrolysis is the splitting of the ester linkage by the basic molecule. As the result the acidic ester portion makes the salt, and also alcohol is produced as the by-product.

The base hydrolysis of methyl butanoate is shown as,

C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH

Here, sodium propanoate and ethanol are produced by the splitting of methyl butanoate in the presence of the base (NaOH).

Therefore, C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH is balanced reaction.

Learn more about hydrolysis here:

https://brainly.com/question/22078321

#SPJ2

Answer:

35 hrs

Explanation:

half life of the substance [tex]t_{1/2 }[/tex] = 8.1 hr

initial amount [tex]N_{0}[/tex] = 75 g

The final amount [tex]N[/tex] = 3.9 g

The time elapsed [tex]t[/tex] = ?

we use the relationship

[tex]N[/tex] = [tex]N_{0}[/tex] [tex](\frac{1}{2} )^{\frac{t}{t_{1/2} } }[/tex]

substituting values, we have

3.9 = 75 x [tex]\frac{1}{2}^{\frac{t}{8.1} }[/tex]

0.052 = [tex]\frac{1}{2}^{\frac{t}{8.1} }[/tex]

take the log of both side

log 0.052 = log  [tex]\frac{1}{2}^{\frac{t}{8.1} }[/tex]

log 0.052 = [tex]\frac{t}{8.1}[/tex] log 1/2

-1.284 =  [tex]\frac{t}{8.1}[/tex]  x -0.301

1.284 = 0.301t/8.1 =

1.284 = 0.0372t

t = 1.284/0.037 = 34.5 ≅ 35 hrs

Answer:

Enthalpy of formation is the energy change when one mole of a substance is formed from its constituent atoms under standard conditions