WILL GIVE BRAINLIEST! Which statement about gravity is correct?
A. Gravity is the substance that most organisms breathe.
B. Gravity is used in automobiles, as it is required to fuel them.
C. Gravity generally works as a force attracting a body toward earth.
D. Gravity is the result of built up emotions that spread when organisms release energy.
Answer:
Its Letter C Because Gravity's characteristic is to draw objects (including us) toward its center (which in this case, Earth).
The diagram shows a motion map for a train. A motion map. The position line is a long black arrow pointing right that is labeled x. Above the line are three dots with a vector pointing away from x that start farther right from x. There are three black dots that are in a vertical column above the point of the third vector. There are two yellow vectors with no black dots pointed toward x starting just above the vertical column of three dots. Which statement is supported by the motion map? The train traveled south and then north. The train moved at a velocity of 75 mph north. The train had a greater velocity when it moved away from the origin. The train stopped for 3 seconds.
Answer:
The Train Stopped For 3 Seconds
Explanation:
Just did quiz on edg its right
According to the question, the train stopped for 3 seconds. So the correct option is D.
What is a motion map?The one-dimensional plots or graphs are constructed from a position line. It is a horizontal line, along which the position of an object can be indicated, while also indicating its acceleration and velocity.
Arrows are used for marking acceleration and velocity and the direction of these arrows marks the direction of the acceleration or the velocity. The size of the arrow is used to represent the magnitude of the velocity or the acceleration.
Thus, to observe the position, acceleration and velocity of an object in motion, a motion map is used.
Velocity and acceleration vector quantities have magnitude as well as direction. Velocity and acceleration are functions of displacement which is the distance covered in a particular direction. Unlike speed which is a function of distance. Distance just measures the distance covered.
Therefore, according to the question, the correct option is D.
Read more about motion maps, here
https://brainly.com/question/13987788
#SPJ5
The following figure shows a Ferris wheel that rotates 6 times each minute and has a diameter of 17.8. What is the centripetal acceleration of a rider?
Answer:
106.8
Explanation:
If you multiply 6 and 17.8, you'll get 106.8.
If that's wrong, my apology's !
the gravity on mars is 3.8 m/s2 and you weigh 200 N. your mass will be??
Answer:
Mass = 52.63 kilograms
Explanation:
Given the following data;
Acceleration due to gravity = 3.8 m/s²
Weight = 200 N
To find mass;
Mathematically, the weight of a physical object is given by the formula;
Weight = mass * acceleration due to gravity
Substituting into the formula, we have;
200 = mass * 3.8
Mass = 200/3.8
Mass = 52.63 kg
a que velocidad en km/h corrio usain bolt en el capeonato mundial de berlin en 2009 para batir el record mundial de los 100 m planos en 9.58
Answer:
v = 37.59 km/h
Explanation:
The question says, "how fast in km / h did usain bolt run at the berlin world championship in 2009 to break the world record for the 100m sprint in 9.58".
Distance, d = 100 m = 0.1 km
Time, t = 9.58 s = 0.00266 h
We need to find the speed of the Usain Bolt. We know that,
Speed = distance/time
So,
[tex]v=\dfrac{0.1}{0.00266}\\\\v=37.59\ km/h[/tex]
So, the required speed is equal to 37.59 km/h.
Felipe drives his car at a velocity of 28 m/s. He applies the brake, which slows the vehicle down at a rate of 6.4 m/s2 and causes it to slow to a stop. How long does it take for the car to stop? Round your answer to the nearest tenth.
Answer:
Explanation:
Use the one-dimensional equation
[tex]v_f=v_0+at[/tex] where v is the final velocity, v0 is the initial velocity, a is the acceleration, and t is the time it takes to reach that final velocity. We are solving for t. Filling in the other values:
0 = 28 + (-6.4)t and
-28 = -6.4t so
t = 4.4 seconds
Answer:
4.4
Explanation:
When do we say that work is done?
Answer:
Work is said to be done when a force applied to an object moves that object. We can calculate work by multiplying the force by the movement of the object.
Answer:
Work is done by a force on an object if (i) a force acts on the object and (ii) the object is displaced from its original position
Which statement describes the possible interaction(s) between two objects
caused by the electric, magnetic, or gravitational force between them?
O A. Electric and gravitational forces only cause objects to repel each
other, and magnetic forces only cause objects to be attracted to
each other.
O B. All three types of forces only cause the objects to repel each other.
O C. Gravitational forces only cause objects to be attracted to each
other, and magnetic and electric forces can cause objects to
attract or repel each other.
O D. All three types of forces only cause the objects to be attrachyd to
each other.
The statement which describes the possible interaction(s) between two objects caused by the electric, magnetic, or gravitational force between them is:
Gravitational forces only cause objects to be attracted to each other, and magnetic and electric forces can cause objects to
What is force?Force can be defined as the push or pull on an object with mass that causes it to change its velocity
So therefore, the statement which describes the possible interaction(s) between two objects caused by the electric, magnetic, or gravitational force between them is:
Gravitational forces only cause objects to be attracted to each
other, and magnetic and electric forces can cause objects to
Learn more force:
https://brainly.com/question/14839816
#SPJ1
Why don't normal everyday collisions result in fusion?
Which force determines if an object is going to move or stay at rest?
a. Friction Force
b. Normal Force
c. Applied Force
d. Net Force
Answer:
a
Explanation:
because it's need someone moving it so it can move somewhere else
When a golfer tees off, the head of her golf club which has a mass of 151 g is traveling 43.9 m/s just before it strikes a 46.0 g golf ball at rest on a tee. Immediately after the collision, the club head continues to travel in the same direction but at a reduced speed of 28.2 m/s. Neglect the mass of the club handle and determine the speed of the golf ball just after impact
Answer:
51.54 m/s
Explanation:
Applying,
Law of conservation of momentum,
Total momentum before collision = Total momentum after collision
mu+m'u' = mv+m'v'.................... Equation 1
Where m = mass of the head of the golf club, m' = mass of the gulf ball, u = initial velocity of the head of the gulf club, u' = initial velocity of the gulf ball, v = final velocity of the head of a gulf club, v' = final velocity of the gulf ball
From the question,
Given: m = 151 g = 0.151 kg, u = 43.9 m/s, m' = 46 g = 0.046 kg, u' = 0 m/s (at rest), v = 28.2 m/s
Substitute these values into equation 1
0.151(43.9)+0.046(0) = 0.151(28.2)+0.046(v')
solve for v'
6.6289+0 = 4.2582+0.046v'
0.046v' = 6.6289-4.2582
0.046v' = 2.3707
v' = 2.3707/0.046
v' = 51.54 m/s
Croquet balls must have a mass of 0.50 kg. A red croquet ball is moving at 5 m/s. It strikes an at-rest green croquet ball head-on and then continues to move in the same direction, but with a speed of 2 m/s. What is the final speed of the green ball?
A.
5 m/s
B.
0.5 m/s
C.
2 m/s
D.
3 m/s
Answer:
Explanation:
The Law of Momentum Conservation for us has the equation
[tex][m_rv_r+m_gv_g]_b=[m_rv_r+m_gv_g]_a[/tex] and filling in:
[tex][(.50)(5.0)+(.50)(0)]=[(.50)(2.0)+(.50)v_g][/tex] and
2.5 = 1.0 + .50v and
1.5 = .50v so
v = 3 m/s
The final speed of the green ball is 3m/s. This can be calculated by the law of conservation of momentum. Thus, the correct option is D.
What is the law of Conservation of Momentum?
The principle of the law of conservation of momentum states that if any two objects undergo collision, then the total momentum of the objects before and after the collision will be the same if there is no external force acting on the colliding objects.
The Law of Conservation of Momentum has the equation which is:
m₁ × u₁ + m₂ × u₂ = m₁ × v₁ + m₂ × v₂
where, m₁ = mass of object 1,
u₁ = initial velocity of object 1 before collision,
m₂ = mass of object 2,
v₁ = final velocity of object 1 after collision,
v₂ = final velocity of the object 2 after collision.
0.50 × 5 + 0.50 × 0 = 0.50 × 2 + 0.50 × v₂
2.5 + 0 = 1.0 + 0.50 × v₂
2.5 - 1.0 = 0.50 × v₂
1.5 = 0.50 × v₂
1.5/ 0.5 = v₂
v₂ = 3m/s
Therefore, the correct option is D.
Learn more about Momentum here:
https://brainly.com/question/24030570
#SPJ2
Dad, if you are seeing this, then I have run away. Angie has been torturing me ever since you started dating her, and I have had enough of it. I have been trying to tell you, but you would never listen. Goodbye, and Angie, if you are seeing this, I posted this on here, so you will not be able to delete anything. Have a nice life
Answer:
hey are you ok!?!?!?!
Explanation:
Is Angie your Dad new gf or wife???
Answer:
:(
Explanation:
u ok?
running away from problems only makes things worse. Your teaching urself to run. but I dont blame u
anyway hope u find what ur looking for out there!!
which factor is least likely to limit the rate of photosynthesis?
- carbon dioxide concentration
- light intensity
- oxygen concentration
- temperature
Answer:
oxygen concentration
Explanation:
Cuatro contenedores idénticos tienen la misma cantidad de gas helio a la misma temperatura inicial. Los recipientes también cuentan con un émbolo móvil que no permite que el helio escape. Cada muestra de gas sigue un proceso distinto como se describe a continuación: Muestra 1: 500 J de calor salen del gas y este realiza 300 J de trabajo. Muestra 2: 500 J de calor entran al gas y este realiza 300 J de trabajo. Muestra 3: 500 J de calor salen del gas y se hace un trabajo de 300 J sobre él. Muestra 4: 500 J de calor entran al gas y se hace un trabajo de 300 J sobre él.
Answer:
1) ΔE = -800 J, 2) ΔE = 200 J, 3) ΔE = -200 J, 4) ΔE = 800 J
Explanation:
For this exercise let's use the first law of thermodynamics
ΔE = Q + W
Where we will apply this expression to several cases
1) output Q = 500 J and does work of W = 300 J.
The two processes involve an energy output
ΔE = - 500 - 300
ΔE = -800 J
Therefore, the internal energy of the gas decreases by this amount,
2) enter Q = 500J and do work of W = 300 J
Positive heat is added and does negative work
ΔE = 500 - 300
ΔE = 200 J
3) they leave Q = 500 J and do (work on the gas) W = 300J
negative heat and positive work come out
ΔE = -500 + 300
ΔE = -200 J
4) heat enters Q = 500 J, work on gas W = 300 J
both positive
ΔE = 500 + 300
ΔE = 800 J
If a 2.0Ω resistor and a 4.0Ω resistor are connected with a 12 volt battery, what is the total resistance of the circuit?
4.8Ω
9.2Ω
6.0Ω
1.3Ω
A hydrometer is an instrument used to determine liquid density. A simple one is sketched in the figure below. The bulb of a syringe is squeezed and released to lift a sample of the liquid of interest into a tube containing a calibrated rod of known density. (Assume the rod is cylindrical.) The rod, of length L and average density 0, floats partially immersed in the liquid of density . A length h of the rod protrudes above the surface of the liquid. Show that the density of the liquid is given by
=
0L
L − h
.
(Do this on paper. Your instructor may ask you to turn in this work.)
Answer:
weight of rod =weight of liquid displaced
mass of the rod ×g =mass of liquid displaced ×g
(g cancelled out)
mass of the rod =mass of liquid displaced
density of rod ×volume of rod =density of liqiud ×volume of liquid displaced
O×cross section area of rod ×height of rod =density of liquid ×Cross section area of rod ×height of rod under the surface
O×L=density of liquid ×(L-h)
then density of liquid =OL/(L-h) shown as required
The density of the liquid is given by =OL/L − h
What is density?Density is the ratio of mass of an object and its volume.
According to the Archimedes principle, weight of rod = weight of liquid displaced
mass of the rod ×g =mass of liquid displaced ×g
So, mass of the rod =mass of liquid displaced
Mass in terms of density is substituted,
density of rod × volume of rod =density of liquid ×volume of liquid displaced
O× cross section area of rod ×height of rod =density of liquid ×Cross section area of rod ×height of rod under the surface
O×L=density of liquid ×(L-h)
Then, density of liquid =OL/(L-h).
Learn more about density.
https://brainly.com/question/9215083
#SPJ2
A spring has an unstretched length of 0.2 m. A 0.2 kg mass hanging from the spring stretches it to an equilibrium length of 0.3 m. Suppose the mass is pulled down to where the spring’s length is 0.5 m. When it is released, it begins
to oscillate. What is the amplitude of the oscillation?
A train starting from rest moves with a uniform acceleration of 0.2 ms-2 for 5 minutes. Calculate the final velocity and the distance travelled in this time.
Answer:
Final velocity = 60 m/s
Distance travelled = 9000 m
Explanation:
Applying,
For Final velocity,
v = u+at ............... Equation 1
Where v = final velocity, u = initial velocity, a = acceleration, t = time.
From the question,
Given: u = 0 m/s(at rest), a = 0.2 m/s², t = 5 minutes = (5×60) = 300 s
Substitute these values into equation 1
v = 0+0.2(300)
v = 60 m/s.
Also for distance,
Applying,
s = ut+1/2at²................ Equation 2
Where s = distance travelled.
subtitute thes values above into equation 2
s = (0×300)+(0.2×300²)/2
s = 9000 m
hmkjiji8gjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
A small hole is made at the bottom of a plastic cup. If it is filled with water and allowed to fall freely, will waterfall down from the hole?
Answer:
It depends on how big the hole is.
Explanation:
If the hole is too big, the water will fall freely out of the cup. However, if it is just a small opening (from a needle, pencil/pen tip, etc.) the water pressure will be able to hold in the water.
the value of 'g' changes as per its position on the earth's surface.justify the statement
Answer:
PLEASE MARK ME AS A BRAINLIEST
Explanation:
There are slight variations in the value of g about earth's surface. These variations result from the varying density of the geologic structures below each specific surface location. They also result from the fact that the earth is not truly spherical; the earth's surface is further from its center at the equator than it is at the poles. This would result in larger g values at the poles. As one proceeds further from earth's surface - say into a location of orbit about the earth - the value of g changes still.
Que capacidade física consiste em deslocar o corpo no espaço o mais rápido possível, mudando o centro de gravidade de posição, sem perder o equilíbrio e a coordenação dos movimentos?
Answer:ur mom
Explanation:because
How efficient is a pulley system if an operator has to pull 2.5m of rope to lift a 250 N pail of water a distance of 4.5 m?
Answer:
the pulley system is very efficient
Explanation:
Given;
load, L = 250 N
distance moved by the load, a = 4.5 m
distance moved by the effort, e = 2.5 m
let the force or effort applied = F
Apply the principle of conservation of energy;
F x e = L x a
F = (L x a) / e
F = (250 x 4.5) / 2.5
F = 450 N
The efficient of the pulley system;
E = Output force / Input force
E = (450 x 2.5) / (250 x 4.5)
E = 1 = 100%
Therefore, the pulley system is very efficient
If the distance between the source of sound and observer is reduced to one half, then
the intensity of sound will become
Answer:
Let the power delivered by the sound wave be 'P'
Intensity by definition is the power delivered per unit area.
i.e. I =
dA
dP
;
In spherical polar coordinate system dA = r
2
Ω
I =
r
2
Ω
dP
;
I ∝
r
2
1
So if distance increases 3 fold. The Intensity becomes
9
1
times the initial
A 27 kg disk with a radius of 1.3m is spinning at an angular speed of 15 rad/s. What is the rotational kinetic energy of the disk?
Answer:
the rotational kinetic energy of the disk is 5,133.375 J
Explanation:
Given;
mass of the disk, m = 27 kg
radius of the disk, r = 1.3 m
angular speed, ω = 15 rad/s
The rotational kinetic energy of the disk is calculated as;
[tex]K.E_{rot} = \frac{1}{2}I \omega^2\\\\ where;\\I \ is \ moment \ of \ inertia\\\\K.E_{rot} = \frac{1}{2} \times (mr^2) \times \omega ^2\\\\ K.E_{rot} = \frac{1}{2} \times (27\times 1.3^2) \times \ 15^2\\\\K.E_{rot} = 5,133.375 \ J[/tex]
Therefore, the rotational kinetic energy of the disk is 5,133.375 J
A man who weighs 75kg on the surface of the earth whose mass is 6*10^24kg. If the radius of earth is 6480km ,calculate the force of attraction between them.
Answer:
718.02N is the answer to the question
A cell supplies current of 0.6A and 0.2A through 1ohms and 4.0ohms resistor respectively. Calculate the internal resistance of the cell
0.5Ω
Explanation:Since different currents are passing through the resistors, then the resistors are most probably connected in parallel. This also means that the same voltage will pass across them.
Using Ohm's law, the voltage across a resistor in a circuit is given by;
V = I(R + r) -----------(i)
For the 1ohm resistor, the voltage across it is given by;
Where;
I = current passing through the 1 ohm resistor = 0.6A
R = resistance of the 1 ohm resistor = 1Ω
r = internal resistance of the cell = r
Substitute these values into equation (i) as follows;
V = 0.6(1 + r) -------------------(ii)
For the 4.0ohm resistor, the voltage across it is given by;
Where;
I = current passing through the 4.0 ohms resistor = 0.2A
R = resistance of the 4.0 ohms resistor = 4.0Ω
r = internal resistance of the cell = r
Substitute these values into equation (i) as follows;
V = 0.2(4.0 + r) -------------------(iii)
Now solve equations (ii) and (iii) simultaneously;
V = 0.6(1 + r)
V = 0.2(4.0 + r)
Substitute the value of V in equation (ii) into equation (iii). Therefore, we have;
0.6(1 + r) = 0.2(4.0 + r)
Solve for r
0.6 + 0.6r = 0.8 + 0.2r
0.6r - 0.2r = 0.8 - 0.6
0.4r = 0.2
r = [tex]\frac{0.2}{0.4}[/tex]
r = 0.5
Therefore, the internal resistance of the cell is 0.5Ω
Which best describes the energy of a sound wave as it travels through a medium? It increases. It decreases. It remains the same. It depends on the medium.
Answer:
It depends on the medium
Explanation:
2021 edge
The energy of a sound wave decreases as it travels through a medium to another medium. Thus, the correct option is D.
What is a Sound wave?A sound wave is the pattern of disturbance which is caused by the energy which is travelling away from the source of the sound in that medium. Sound waves are the longitudinal waves. This means that the propagation of these vibration of particles is parallel to the energy which this wave propagation direction has. When the atoms in the medium are set in vibration then they move back and forth in a direction. This continuous to occur in back and forth motion resulting in a high-pressure and a low-pressure region in the medium and thus propagating sound.
Sound wave is the physical vibration wave which travel through the air to reach the ears of organisms. Sound energy is the result when force makes an object to vibrate. A wave can lose energy as it travels through a medium because the medium can also absorb the energy from the wave. The medium changes some of the acoustic energy of the sound wave into heat energy.
Therefore, the correct option is D.
Learn more about Sound wave here:
https://brainly.com/question/21995826
#SPJ2
When the foil is negatively charged, will all of the foil still be made up of aluminum atoms?
Answer:
the answer is yes
Explanation:
because the aluminium can still pass current
When the foil is negatively charged, still all of the foil is made up of aluminum atoms as it has electrons present in it.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ2
