The average atomic mass of Ca : 43.943 amu
Further explanationGiven
Isotopes of Ca
Required
The average atomic mass
Solution
Isotopes are elements that have the same Atomic Number (Proton)
Atomic mass is the average atomic mass of all its isotopes
Avg atomic mass = m1.%m1 + m2.%m2....mn.%mn
m1 = isotope 1
m2 = isotope 2
% = abundance of the elements in nature
Input the value :
avg atomic mass = 39.96 x 0.96941 + 41.96 x 0.0647+42.96 x 0.0135 + 43.96 x 0.02086 + 47.95 x 0.0187
avg atomic mass =43.943 amu
A sample of methane gas collcted t a pressure of 0.0884 atm and a temperature of 6.00 C is found to occupy a volume of 26.5 L. How many moles of CH4 gas are in the sample? ____ mol
Answer:
0.1mole
Explanation:
Given parameters:
Pressure = 0.0884atm
Temperature = 6°C = 6 + 273 = 279K
Volume occupied = 26.5L
Unknown:
Number of moles = ?
Solution:
To solve this problem, we are going to use the ideal gas equation:
PV = nRT
P is the pressure
V is the volume
n is the number of moles
R is the gas constant = 0.082atmLmol⁻¹k⁻¹
T is the temperature.
Insert the parameters and solve for n;
0.084 x 26.5 = n x 0.082 x 279
n = 0.1mole
Help Please with this
Is luster a chemical or physical change? (Worth 50 POINTS!)
Answer:
It is a Physical change, have a great day :)
Explanation:
A chemical change is a permanent change. A Physical change affects only physical properties i.e. shape, size, etc. ... Some examples of physical change are freezing of water, melting of wax, boiling of water, etc. A few examples of chemical change are digestion of food, burning of coal, rusting, etc.
what volume (in L) of ethane (C2H6) will be required to produce 42.5 L of carbon dioxide in the reaction below?
2C2H6(g)+7O2(g)->4CO2(g)+6H2O(g)
Answer:
21.25
Explanation:
how glass tube filed with acidified potassium dichromate detect drunken driver
Answer:
See explanation
Explanation:
The reaction between alcohol and acidified potassium dichromate is a redox reaction. This reaction can be used to detect a drunken driver.
Alcohols can be oxidized to aldehydes, ketones and carboxylic acids depending on the structure of the alcohol. Primary alcohols yield adehydes and carboxylic acids while secondary alcohols are oxidized to ketones.
The colour of the acidified potassium dichromate turns from orange to green when exposed to alcohols from the breath of a drunken driver.
the first stage of an blank is when clouds form; this is the cumulus stage
Answer:
thunderstorm
Explanation: The cumulus stage is the first stage in a thunderstorm and it involves clouds forming. We see the cloud that will become a thunderstorm as it is starting to form and grow. This is due to the rising levels of thermal energy.
How many grams of K2Cr2O7, are soluble in 100 g of
water at 95 °C?
Answer:
75 grams
Explanation:
At 95 °C, you can dissolve up to 75 grams of K2Cr2O7 in 100 mL of water.
What is solubility?The solubility of a substance in a particular solvent is the maximum amount of that substance that can dissolve in the solvent at a given temperature. The solubility of a substance can be affected by factors such as temperature, pressure, and the presence of other substances.
For K2Cr2O7, the solubility in water is highly dependent on temperature. At 95 °C, the solubility of K2Cr2O7 in water is approximately 75 g/100 mL. This means that at 95 °C, you can dissolve up to 75 grams of K2Cr2O7 in 100 mL of water. Since 100 g of water is equivalent to 100 mL, you can dissolve up to 75 grams of K2Cr2O7 in 100 g of water at 95 °C.
Learn more about solubility, here:
https://brainly.com/question/28170449
#SPJ2
what elements comprise the largest portion of Earth's atmosphere?
Answer:
Nitrogen and Oxygen make up 99% of the Earths atmosphere. Then Argon makes up the rest of the atmosphere.
How can you ensure the chemical reaction produces the right amount of heat in a hot pack without hurting you?
Answer:
Heat packs that contain iron and water packets: Exposing the solution to air results in the oxidation of the iron (creates rust). The oxidation of the iron is an exothermic process. Heat packs that contain supersaturated sodium acetate: These are reusable, the packs are boiled to dissolve sodium acetate.
Explanation:Thanks for asking question
What type of system is impacting weather in Houston?
A) High pressure
B) Low pressure
C) Warm pressure
D) Cold pressure
Answer:
a) high pressure
that is the answer i got, but wait for a few more answers before you write the answer
Natural Causes of Climate Change:
Pick one cause of natural climate change. Explain what it is and how
it causes dimate change. What is the effect of the climate change?
Helpp plzzz
Answer:
cause of climate change: The earth's climate is affected and changed through a lot of natural causes like volcanic eruptions.
how it causes change: Volcanoes can be extremely dangerous to earth because it can impact climate change. During major explosive eruptions huge amounts of volcanic gas, aerosol droplets, and ash are injected into the stratosphere.
what is the effect of the change: Major eruptions alter the Earth's radiative balance because volcanic aerosol clouds absorb terrestrial radiation, and scatter a significant amount of the incoming solar radiation, an effect known as "radiative forcing" that can last from two to three years following a volcanic eruption.
i hope you get it correct!! <3 can i plz get a brainlest!
pls answer i need it now!! I will give brainliest to the best answer!!
Answer:
sample 2
Explanation:
hope this helps
I neeeeeeeeed help you within 30 min
Answer:
The answers to your question are given below
Explanation:
The equation for the reaction is given below:
2KClO₃ —> 2KCl + 3O₂
The total number of each atoms present in the reactants and products can be obtained by doing a head count as illustrated below:
Reactants >>>>>> Number of atoms
Potassium (K) >>> 2 × 1 = 2
Chlorine (Cl) >>>> 2 × 1 = 2
Oxygen (O) >>>>> 2 × 3 = 6
Products >>>>>>> Number of atoms
Potassium (K) >>> 2 × 1 = 2
Chlorine (Cl) >>>> 2 × 1 = 2
Oxygen (O) >>>>> 3 × 2 = 6
MULTIPLE CHOICE QUESTION
Electrons fill in energy levels in which of the
following ways?
1.Lowest energy level first, so it fills in the inside
rings first
2.Lowest energy level first, so it fills in the
outside rings first
3.Highest energy level first, so it fills in the inside
rings first
4.Highest energy level first, so it fills in the outside
rings first
Answer:
I think the answer is 3. Highest energy level first, so it fills in the inside rings first
Electrons occupy the lower-energy orbitals first, then go on to fill the next higher-energy orbital until all of the electrons contain been placed.
Which energy levels do electrons fill first?Most of the time, electrons occupy the lower-energy orbitals first, then go on to fill the next higher-energy orbital until all of the electrons have been positioned.
The lowest energy level is always added to initially until it has as many electrons as it can have. The following higher energy level is then filled with electrons, and so on.
The lowest energy level is always filled up with additional electrons first, up to the point where that level can hold no more, and then further electrons are added to the next higher energy level, and so on. A level's total number of orbitals determines how many electrons can be present at that energy.
Therefore, the correct answer is option 3. Highest energy level first, so it fills in the inside rings first.
To learn more about Electrons refer to:
https://brainly.com/question/860094
#SPJ2
The electrical charge of the nucleus is determined by:
a. the number of neutrons only
b. the number of protons and neutrons together
c. the number of protons only
d. the number of electron only
- Is energy absorbed or released by a material during the phase change from a solid to a liquid?
A)Absorbed
B)Released
Answer:
A) Abosrbed
Explanation:
The change is endothermic, meaning the material absorbs energy when it changes its phase from a solid to a liqiud.
Turning on your X-Box is an example of___ energy turning into ___ energy.
A.electrical,nuclear
B.nuclear,sound
C.electrical,light
D.electrical,chemical
Answer:
electrical --> light
Explanation:
Sally is building a list of the types of matter that have energy. She includes liquids on her list because she can see that liquids flow. Is her list complete?
a. yes, her list with just liquids on it is complete
b. no, she should add only gases to her list
c. no, she should add only solids to her list
d. no, she should add gases and solids to her list
Answer:
I just looked up the types of matter energy has.
Explanation:
I believe the answer is D.
Sally's list of matter that have energy is not complete as all the types of matter have energy as all matter have mass , and mass and energy are related, so she should have added gases and solids to her list.
What is matter?Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it has volume .Matter is composed up of atoms which may or not be of the same type.
Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states such as solids, liquids and gases depending on the conditions of temperature and pressure.
The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.
Learn more about matter,here:
https://brainly.com/question/13556931
#SPJ2
What is a disadvantage of geothermal energy
Answer:
it runs the risk of triggering earthquakes. releases harmful gases
Rift valleys can form when fractures in Earth's crust widen. The valley walls slowly move apart at a rate of only a few millimeters a year.
Which type of boundary would rift valleys form at?
A. Convergent
B. Divergent
C. Transform
D. Transform Fault
Answer:
B. Divergent
Explanation:
Rift valleys are usually formed at divergent margins where fractures in the earth's crust widens.
The fracture widens due the pulling apart of the plates that are involved.
Most rift valleys are located within the continental crust. One of the prominent rift margins in the world is the East Africa rift valley system. This creates a crack within the earth that continues to grow as the separation continues.What is formed when polyatomic ions bond with other ions?
It would be Ionic Compounds.
0.2 moles of aluminum has a mass of 5.4 g. what is The molar mass of aluminum
Answer:
Molar mass = 27 g/mol
Explanation:
Given data;
Number of moles of Al = 0.2 mol
Mass of Al = 5.4 g
Molar mass of Al = ?
Solution:
Formula:
Number of moles = mass/molar mass
By putting values,
0.2 mol = 5.4 g/ molar mass
Molar mass = 5.4 g/ 0.2 mol
Molar mass = 27 g/mol
Which products would form if chlorine gas was bubbled through a solution of sodium bromide?
a. Na and BrCl
b. Na snd BrCl2
c. Na and Br2
d. Na(cl)2 and Br2
Answer:
NaCl and Br2
Explanation:
Edge 2020
Answer:
The Answer is C: Na and Br3
Explanation:
3. A property of acids is that they taste sour. A
property of bases is that they feel slippery. Would
you use either of these properties to identify an
unknown substance? Why or why not?
Explanation:
Touching or tasting these unknown substances could be lethal or cause severe burns to your skin, so it is advisable to use other methods to identify substances.
Why the microscope is made an inclination joint?
Answer:
inclination joint This is the joint between the pillar and the arm of the microscope. It is used to tilt the body tube and stage. It is usually best to keep the stage horizontal.
Explanation:
How the lead (II) carbonate can be separated and collected from the product mixture with ammonium nitrate?
Answer:
fgedhwkmgfvhcdnxj
Explanation:
gtryijdohuygfvbhgfy
Volcanic islands can form over hot spots. The Hawaiian Islands started forming over hot spots in the Pacific Ocean millions of years ago. What process causes the hot, solid rock to rise through the mantle at these locations?
Answer: Convection Currents
Explanation:
Due to the different temperature occurring at the upper and lower layers of the mantle, it causes heat transfer to occur. One of such heat transfer is the Convection currents which causes warmer, less dense rock material in the core to rise through the mantle. Also, the cooler rocks in the higher mantle move slowly towards the core.The movement caused by these Convection current in the Earth are called plate tectonics which are responsible for earthquakes and volcanoes.
Approximately how long does it take for the moon's phases to change from a NEW moon to a FULL moon?
1 week
3 weeks
2 weeks
4 weeks
Answer:
4 weeks
Explanation:
It takes 4 weeks for the cyclle to be happening again
Can someone help
Me out pls if your good at chemistry
Observe the image of sodium. List the properties you see.
Answer:
It is soft and white. It has a low melting and boiling point, a good conductor electricity, and reacts with water. Furthermore, it is also highly reactive, malleable, and ductile.
Explanation:
Hope I helped!
Answer:
silvery-white and waxy
Explanation:
Properties means the observations you can make just by looking at it or the qualities that the object has.
So when I looked at the sodium I saw a silvery-white metal (sodium is a metal), that has this waxy appearance to it.
