Calcular los momes que hay en 40g de aluminio

Answers

Answer 1

Answer:

Calculate the mums in 40g of aluminum

Explanation:

needs to be more specific


Related Questions

What happens when an unstable nucleus undergoes radioactive decay?
A. Electrons change energy levels to balance the nucleus.
B. Energy is absorbed by the nucleus to make it more stable.
O C. Particles or electromagnetic radiation are emitted.
D. The nucleus increases in mass through radioactive decay.

Answers

i believe the answer is C. an unstable nucleus emits radiation and is transformed into the nucleus of one or more elements. i hope this helps!

Please help I’ll give brainliest

Answers

Answer:

N2, O2 and Br2

Explanation:

N2, O2 and Br2 are formed of two atoms, so they are diatomic

This is a list of the seven diatomic elements. The seven diatomic elements are:

Hydrogen (H2)

Nitrogen (N2)

Oxygen (O2)

Fluorine (F2)

Chlorine (Cl2)

Iodine (I2)

Bromine (Br2)

What does a vacuole mean

Answers


a small cavity or space in tissue, especially in nervous tissue as the result of disease.

Answer:

a space or vesicle within the cytoplasm of a cell, enclosed by a membrane and typically containing fluid.

or

a small cavity or space in tissue, especially in nervous tissue as the result of disease.

Which question would most likely be studied by a biologist?
A.
How can a drug that treats cancer be synthesized?
B.
How can cancer-causing substances be regulated?
C.
How much ultraviolet radiation passes through the atmosphere?
D.
What causes cancer cells to grow uncontrollably?

Answers

Answer:

The correct answer would be - D. What causes cancer cells to grow uncontrollably?

Explanation:

A Biologist is a person that studies living organisms and the study of living organisms and their process called biology. Biology is a very vast field that involves many branches such as zoology, botany, biochemistry, immunology, biophysics, anatomy, ecology and many more.

So, given all are can be an example of the study biology wanted to do, however, the question most likely studied by a biologist would be What causes cancer cells to grow uncontrollably as it deals with an organism and their biological process.

Use the equation below to answer the following question
2NaHCO3(aq) + Ca(H2PO4)2 (aq) → Na2HPO4 (aq) + CaHPO4 (aq) + 2002 (8) + 2H20 (0)
The theoretical yield of CHPO, is 10 g. If 8 g of CaHPO4 are produced from the reaction shown above, what is the percent yield of CHPO ?

Answers

Answer:

Percent Yield = 80%

Explanation:

Percent yield of a reaction is defined as one hundred times the ratio between the actual yield and the theoretical yield. That is:

Percent yield = Actual Yield / Theoretical Yield * 100

Where theoretical yield of CaHPO4 is 10g and actual yield is 8g

Replacing:

Percent yield = 8g / 10g * 100

Percent Yield = 80%

Which of the following correctly ranks the following bonds in order from most to least polar?

C-H, N-H, O-H, F-H


a)
O-H > F-H > N-H > C-H
b)
F-H > N-H > O-H > C-H
c)
C-H > N-H > O-H > F-H
d)
F-H > O-H > N-H > C-H

Answers

Answer:

O-H F-H N-Hy

Explanation:

C-H N-H O-H F-H

What is the delta H when 72.0 grams H2O condenses at 100.00C?

Here are some constants that you MAY need.

specific heats heat of fusion heat of vaporization

H2O(s) = 2.1 J/g0C 6.01 kJ/mole 40.7 kJ/mole

H2O(L) = 4.18 J/g0C

H2O(g) = 1.7 J/g0C



2930 kJ


163 kJ


-163 kJ


-2930 kJ

Answers

Answer: The value of [tex]\Delta H[/tex] is -163 kJZ

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

We are given:

Given mass of water = 72.0 g

Molar mass of water = 18 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of water}=\frac{72.0g}{18g/mol}\\\\\text{Moles of water}=4mol[/tex]

Calculating the heat released for the condensation process:

[tex]\Delta H=n\times \Delta H_{(vap)}[/tex] ......(2)

where,

[tex]\Delta H[/tex] = amount of heat released

n = number of moles of water = 4 moles

[tex]\Delta H_{(vap)}[/tex] = specific heat of vaporization = -40.7 kJ/mol

Negative sign represents the amount of heat released.

Putting values in equation 2:

[tex]\Delta H=4mol\times (-40.7kJ/mol)=-163kJ[/tex]

Hence, the value of [tex]\Delta H[/tex] is -163 kJ

Use mathematics to prove that the 5.50 grams of salicylic acid (C7H6O3) used in this experiment is equal to 0.04 mol.

Answers

Answer:

Please find the answer to the question below

Explanation:

In chemistry, the following mathematical formula is used to calculate the number of moles contained by a substance:

mole = mass of substance (g)/molar mass of substance (g/mol)

Molar mass of salicylic acid (C7H6O3) = 12(7) + 1(6) + 16(3)

= 84 + 6 + 48

= 138g/mol

Mass = 5.50grams

mole = 5.5/138

mole = 0.039

Approximately, the number of moles of 5.5grams of salicylic acid is 0.04moles. This is in accordance with the mole value (0.04) given in this question.

Which of the following best describes an electron transition?

A. An electron gains or loses energy and moves between continuous
energy levels.
B. An electron gains or loses charge and changes into a proton or a
neutron.
C. An electron gains or loses energy and moves between quantized
energy levels.
D. An atom gains or loses an electron and becomes an ion.

Answers

Answer:

A. An electron gains or loses energy and moves between continuous

energy levels.

The metric system is also known as the

Answers

Answer:

THE answer is all of above

Explanation:

The metric system, also known as the Système international d'unités (SI), was developed in the late 1700s to standardize units of measurement in Europe. The metric system is the primary system of measurement used through much of the world and in science.

If 15.0 mL of phosphoric acid completely neutralizes 38.5 mL of 0.150 mol/L calcium hydroxide, what is the concentration of the phosphoric acid?

Answers

Answer:

Let me give it a try.

H3PO4 + Ca(OH)2 = Ca3(PO4)2 + H2O

Balancing this reaction

2H3PO4 + 3Ca(OH)2 == Ca3(PO4)2 + 6H2O.

Moles= Molarity x Volume

Volume = 38.5ml = 0.0385L

Moles of Ca hydroxide = 0.150m/L x 0.0385L

(Notice the units canceling out...leaving moles).

=0.005775moles of Ca(OH)2.

From balanced reaction...

3moles of Ca(OH)2 completely reacts with 2moles of H3PO4

0.005775moles of Ca(OH)2 would completely react with....

= 0.005775 x 2/(3)

=0.00385moles of H3PO4.

Now we're looking for its Concentration in Mol/L

Molarity=Moles of solute/Volume of solution(in L)

Volume of solution assuming no other additions to the reaction = 15ml + 38.5ml =53.5ml =0.0535L

Molarity = 0.00385/0.0535

=0.072Mol/L.

If this is wrong

then Simply Try The formula for Mixing of solutions

C1V1 = C2V2

0.15 x 38.5 = C2 x (15+38.5)

C2 = 0.11M/L.

A carbon atom that is surrounded by four hydrogen atoms has a _____ molecular geometry. This geometry results from the arrangement of the _____ hybrid orbitals around the carbon atom. They are formed when the s-orbital and ______ -orbitals mix, or hybridize.

Answers

Answer:

Tetrahedral, sp3, p

Explanation:

C has 4 bonds and hence its tetrahedral shape with 109.5 degrees. since there are 4 bonds, it is sp3

Answer:

A carbon atom that is surrounded by four hydrogen atoms has a

✔ tetrahedral

molecular geometry.

This geometry results from the arrangement of the

✔ four sp3

hybrid orbitals around the carbon atom.

They are formed when the s-orbital and

✔ three p

-orbitals mix, or hybridize.

Explanation:

A. 2 pts: In terms of conservation of mass, what were the results of each experiment (which one conserved mass and which one did not)?
B. 4 pts: PROVIDE a SPECIFIC explanation for "why" the results in both videos were different.
. 2 pts: Discuss differences in the experimental steps between the two videos (for example what was done in video one that was not done in
video two, why would this make a difference in conserving mass?)
• 2 pts: Look at both chemical equations (below for convenience), what difference in the type of products would have contributed to the
differences in why one conserved mass and one did not?
REACTION 1: Pb(NO3)2 (aq) + 2K1 (aq) --> 2KNO3 (aq) +Pölz (s)
• REACTION 2: NaHCO3(s) + CH3COOH(aq) → CO2(g) + H2Om + CH3COONa(aq)

Answers

Answer:

dftdffdgxrdfdrdxxxxdddddddddddddeeertdffddy

When your body is warmed by the sun during the winter, this process is said to be

a. exothermic.
b. endothermic.
c. isothermic.
d. none of the above

Answers

Answer:

B. Endothermic

Explanation:

Your body is absorbing the heat.

1. In 1996 a meteor crashed into the Earth near Steelsville, Ontario. The resulting meteorite was found to contain 5,790 g of Molybdenum Chloride having a formula of Mo2Cl9. How many molecules of Mo2Cl9 are present in the 5,790 g meteor?

Answers

Answer:

6.38×10²¹ molecules

Explanation:

Formula for molybdenum chloride is:

Mo₂Cl₁₀

Molar mass is : (Molar mass for Mo) . 2 + (Molar mass for Cl) . 10

95.94  . 2 + 35.45  . 10 = 546.38 g/mol

We determine moles that are contained in 5.790 g of Mo₂Cl₁₀

5.790 g . 1 mol /546.38 g = 0.0106 moles

We count the molecules:  0.0106 mol . 6.02×10²³ molecules / mol =

6.38×10²¹ molecules

Remember that 6.02×10²³ is also called Avogadro's number (NA) which is the number of particles of anything, that are contained in 1 mol.

What is the pH of a solution?
O A. A measure of the strength of the acid
B. A measure of the buffering ability of the solution
O c. A measure of the hydrogen gas concentration
O D. A measure of the acidity of the solution

Answers

Answer:

D. A measure of the acidity of the solution

Explanation:

pH is a measure of how acidic or basic a solution is, and is measured on a scale from 0-14, where 7 is neutral, anything less than 7 is acidic, and anything more than 7 is basic.

show using dots to illustrate high population density and low population density in the boxes provided in answer to guide questions ​

Answers

Answer:

Just add a plenty of dots in the first one and very few dots in the second one

An area with high population density will have many dots while areas will low population density will have few dots when using dots to illustrate population density.

What is population density?

Population density is the ratio of the total number of organisms found in a given area to the total of the area of that place or habitat.

Population density = total number of organisms/total area

An area with high population density indicates that more organised ate found per unit area than an area with low population density.

Therefore, using dots to illustrate population density, an area with high population density will have plenty dots while areas will low population density will have few dots scattered over.

Learn more about population density at: https://brainly.com/question/13902749

Which sequence of steps describes the life cycle of a lake?
A. Runoff fills a depression - sediments build up - water becomes
increasingly shallow
B. Runoff fills a depression - sediments are eroded - water becomes deeper
C. Runoff fills a depression - sediments build up
- water rises continuously
D. Runoff fills a depression - sediments are eroded - water spreads over a wider area

Answers

Answer:

The actual sequence of steps which describe the life cycle of a lake is given below:

C. Runoff fills a depression - sediments build up

- water rises continuously

Explanation:

This is because, the water which builds up as a result of the runoff water accumulating on the depression helps towards building up. When it must have accumulated greatly, it ends up forming a lake.

how does evelyn hear music?​

Answers

Who even is Evelyn?

Briefly explain why adding insulation to an attic helps reduce heating costs.

Answers

Answer:

Insulation reduces the exchange of heat through a surface such as a wall, attic, duct or roof. In a well-insulated home, less warm air escapes from the house during the winter, and less cool air escapes during the summer, reducing the amount of energy needed for heating and cooling

If the pH = 6.5, what is the [H+]? *
3.16 x 10-7
3.16 x 10-6
O
3.16 x 10-5

Answers

Answer:

Key Concepts

The hydrogen ion concentration in a solution, [H+], in mol L-1, can be calculated if the pH of the solution is known.

pH is defined as the negative logarithm (to base 10) of the hydrogen ion concentration in mol L-1 pH = -log10[H+] ...

[H+] in mol L-1 can be calculated using the equation (formula): [H+] = 10-pH

More items...

Explanation:

Answer:

[tex]pH = - log[H {}^{ + } ] \\ 6.5 = - log[H {}^{ + } ] \\ [H {}^{ + } ] = {10}^{ - 6.5} \\ [H {}^{ + } ] = 3.16 \times {10}^{ - 7} \: mol {dm}^{ - 3} [/tex]

Given the structural formula: This compound is classified as an

Answers

Answer:

A.) aldehyde is the answer

From the given structural formula, the compound is ethanamide and thus, belongs to the group of amides. Thus, the correct option is B.

Amide is a functional group of organic compounds having an acyl group (R-C=O) linked to amine group (-NR¹R² where R¹ and R² are hydrogen atoms or alkyl groups). The amide functional group is given as -CON= (not double bond with N, but two distinct single bonds).

Amides can be classified into the following types depending on the moiety attached to nitrogen other than the carbonyl carbon:

1. Primary amides - amide in which the nitrogen atoms is attached to two hydrogen atoms

2. Secondary amides - in which the nitrogen atom is attached to one hydrogen and one alkyl group.

3. Tertiary amides - in which the nitrogen atom is attached to two alkyl groups.

Learn more about amides in:

https://brainly.com/question/29595493

#SPJ2

An example of a product made from a synthetic material is
Question 5 options:

A)

a PET plastic water bottle.

B)

knitted wool socks.

C)

a cotton t-shirt.

D)

a pine 2×4 board.

Answers

Hi there! A simple answer and explanation is below :)

Answer:

A) PET plastic water bottle

Explanation:

Plastic goes through a manufacturing process before being used to make bottles for liquids like milk, soda, motor oil, and shampoo, as well as dry items like pharmaceuticals and nutritional supplements. Plastic is made up of a variety of organic polymers, including polyethylene and ethylene, in its unprocessed condition. In a soft state, plastic can be molded into the desired shape and then cast into a solid stat

Which of the following could possibly be true about a strong acid? (Check all that apply:).
It will completely dissociate (break apart) when dissolved in water.
It could have a pH of 6
It could have a pH of 13
Only a few of the acid molecules will dissociate (break apart).
It could have a pH of 2.
It could have a pH of 9

Answers

Answer:

it could have a pH of 2 it will completely dissociate when dissolved in water

Por qué razón se fomenta la inmigración Europea?​

Answers

Hola aquí va la respuesta!

Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.

Hola aquí va la respuesta!

Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.

an engineer chooses to use bamboo as a building material because it grows quickly and needs little space to grow. This is an example of?

Answers

Mark Brainliest please

Answer: This is an example of Green Design

Green design can be described as a method in which any building project is made by minimizing the harmful effects of construction on humans and environment. Green design is a sustainable design which is better for the economy too. In a green design, eco- friendly materials are used for construction works.
In the scenario discussed in the question, an engineer is using bamboo as a building material due to its eco- friendly features. Hence, it is an example of green design.

Answer:

A) This is an example of Green Design

Explanation:

Chemistry 1 question please help!! 10 points

Answers

Answer:

3

Explanation:

its the 3 one it is

what is the slope of the line segment

-3
-1/3
1/3
3​

Answers

Answer:

slope = 3

Explanation:

[tex]slope = \frac{3 - 0}{1 - 0} \\ = 3[/tex]

Joelle is a manager at a construction company, and she is interested in the chemistry behind the materials they use. She has begun studying the materials used to fill walls. She knows that to keep the temperature inside a room steady the material must be a thermal insulator, and she predicts that materials should not be acidic or else they would dissolve too easily in water.

Which of these is a molecular ingredient that could be used in a wall-filling material ?

C27H36N2O10
Na6Ba6
NeNa
HCl

Answers

Answer:

a

Explanation:

A molecular ingredient that could be used in a wall-filling material is C₂₇H₃₆N₂O₁₀, is not a good thermal insulator, hence option A is correct.

The big molecule C₂₇H₃₆N₂O₁₀ is a poor thermal insulator. Since NeNa is a relatively reactive chemical, it would probably dissolve in water far too quickly. The acidic molecule HCl would dissolve far too quickly in water.

Not a good thermal insulator is C₂₇H₃₆N₂O₁₀. It is a big molecule composed of a lot of hydrogen atoms. Since hydrogen atoms are excellent heat conductors, they would be ineffective in stopping heat from passing through a material used to fill a wall.

Thus, the option (A) C₂₇H₃₆N₂O₁₀ is correct.

Learn more about thermal insulator, here:

https://brainly.com/question/23134662

#SPJ6

A + 2 B + 4 C → products is known to be second order in A, first order in B and independent of the concentration of C. What is the value of the rate constant for this reaction if its rate is 0.783 M · s−1 when [A] = 5.00 M, [B] = 7.00 M, and [C] = 3.00 M? −2 −1 Answerinunitsof M ·s .

Answers

Answer:

4.47 × 10⁻³ M⁻² s⁻¹

Explanation:

Let's consider the following generic equation.

A + 2 B + 4 C → products

This reaction is known to be second order in A, first order in B and independent of the concentration of C (zero order in C). The rate law is:

rate = k × [A]² × [B] × [C]⁰

rate = k × [A]² × [B]

where k is the rate constant

When the rate is 0.783 M/s, [A] = 5.00 M, [B] = 7.00 M, and [C] = 3.00 M, the rate constant is:

k = rate / [A]² × [B]

k = 0.783 M/s / (5.00)² × (7.00) = 4.47 × 10⁻³ M⁻² s⁻¹

Other Questions
Qu invento fue el ms importante para revolucionar la industria crnica? frenos de aire acopladores de nudillos el coche Pullman el carro frigorfico Read the poem below and answer the question.The Journey by Mary OliverOne day you finally knewwhat you had to do, and began,though the voices around youkept shoutingtheir bad advice --though the whole housebegan to trembleand you felt the old tugat your ankles."Mend my life!"each voice cried.But you didn't stop.You knew what you had to do,though the wind priedwith its stiff fingersat the very foundations,though their melancholywas terrible.It was already lateenough, and a wild night,and the road full of fallenbranches and stones.But little by little,as you left their voices behind,the stars began to burnthrough the sheets of clouds,and there was a new voicewhich you slowlyrecognized as your own,that kept you companyas you strode deeper and deeperinto the world,determined to dothe only thing you could do --determined to savethe only life you could save.The words "knew," "you," and "do" in the first three lines are an example of _____.assonancealliterationsymbolismpersonification Describe the function of Chloropasts HELP pleaseee..!!!!!!!!!!!!! What is the value of x? 4. The human population has experienced unchecked growth for the past 200 years. What does "unchecked" mean? A. Slow b. At a steady rate c. Unrestrained d. Dangerous short term finance is required for 5 years true or false Please help quickly I really dont understand this question and im freaking out. what is nolka's response when she first meets the chenoo? Explain in your own words why patient confidentiality is essential in healthcare.Reflect on your research. Share one example of a breach in patient confidentiality.Describe the steps you would take to prevent the breach you described above Help I dont know how to do this Measurement and Geometry11. What would the total interior angles be for a 21 sided shape? How many grams of potassium chloride will be needed to produce829 grams of zinc chloride? Based on the context of the sentence, what is the meaning of the underlined cognate ?We stared out across the waters of Loch Ness and wondered at what mysteries lie beneath. A. Land B. Lake C. Low D. Lock Consider a model in which two products, x and y, are produced. There are 30 pounds of material and 60 hours of labor available. It requires 9 pounds of material and 12 hours of labor to produce a unit of x, and 5 pounds of material and 15 hours of labor to produce a unit of y. The profit for x is $300 per unit, and the profit for y is $250 per unit. Required:How many units of x and y to produce to maximize profit, the model is Draw the graph of y = 2x + 1 how are they the same PLZ ASAP I WILL GIVE YOU BRAINLIEST 20Which of these historical documents would be considered a primary source?A)the autobiography of a soldier who fought in World War IIB)a textbook chapter changes caused by the Industrial RevolutionC)a review of a museums exhibit on the Great DepressionD)a research report about World War I Pls help me I dont understand this!!!! can someone please help