Calculate a pressure at a point that is 100 m below the surface of sea water of density 1150 kgm?
​

Answer:

- Aluminium sulfate Al2(SO4)3 dissociates in two aluminium ions and three sulfate ions, therefore, van't Hoff factor is 5 (incorrect).

Explanation:

Hello,

In this case, since the van't Hoff factor is related with the species that result from the ionization of a chemical compound, we can see that that

- Aluminium sulfate Al2(SO4)3 dissociates in two aluminium ions and three sulfate ions, therefore, van't Hoff factor is 5 (incorrect).

- Ammonium nitrate NH4NO3 dissociates in one ammonium ions and one nitrate ion, therefore, van't Hoff factor is 2 (correct).

- Sodium sulfate Na2SO4 dissociates in two sodium ions and one sulfate, therefore, van't Hoff factor is 3 (correct).

- Sucrose is not ionized, therefore, van't Hoff factor is 1 (correct).

Best regards.

Answer:

Al(OH)₃ +  OH⁻  →  Al(OH)₄⁻

The compound is called hydroxoaluminate.

Explanation:

Aluminiun Hydroxide → Al(OH)₃

NaOH → Sodium hydroxide.

The Al(OH)₃ is an amphoteric compound, while the NaOH is a strong base. When they react, we may think that, fist of all, the base can dissociate: NaOH  →  Na⁺  +  OH⁻

So the Al(OH)₃ will be a Lewis acid, as it can donate a pair of e⁻

Al(OH)₃ +  OH⁻  →  Al(OH)₄⁻

Answer:

– 844 kJ/mol.

Explanation:

The following data were obtained from the question:

N2(g) + 3 F2(g) –––> 2 NF3(g)

Enthalpy of N≡N (N2) = 945 kJ/mol

Enthalpy of F–F (F2) = 155 kJ/mol

Enthalpy of N–F3 (NF3) = 283 kJ/mol

Enthalpy change (∆H) =?

Next, we shall determine the enthalpy of reactant.

This is illustrated below:

Enthalpy of reactant (Hr) = 945 + 3(155)

Enthalpy of reactant (Hr) = 945 + 465

Enthalpy of reactant (Hr) = 1410 kJ/mol

Next, we shall determine the enthalpy of the product.

This is illustrated below:

Enthalpy of product (Hp) = 2 x 283

Enthalpy of product (Hp) = 566 kJ/mol

Finally, we shall determine the enthalpy change (∆H) for the reaction as follow:

Enthalpy of reactant (Hr) = 1410 kJ/mol

Enthalpy of product (Hp) = 566 kJ/mol

Enthalpy change (∆H) =?

Enthalpy change (∆H) = Enthalpy of product (Hp) – Enthalpy of reactant (Hr)

Enthalpy change (∆H) = 566 – 1410

Enthalpy change (∆H) = – 844 kJ/mol

Answer:

– 844 kJ/mol.

Explanation:

The following data were obtained from the question:

N2(g) + 3 F2(g) –––> 2 NF3(g)

Enthalpy of N≡N (N2) = 945 kJ/mol

Enthalpy of F–F (F2) = 155 kJ/mol

Enthalpy of N–F3 (NF3) = 283 kJ/mol

Enthalpy change (∆H) =?

Next, we shall determine the enthalpy of reactant.

This is illustrated below:

Enthalpy of reactant (Hr) = 945 + 3(155)

Enthalpy of reactant (Hr) = 945 + 465

Enthalpy of reactant (Hr) = 1410 kJ/mol

Next, we shall determine the enthalpy of the product.

This is illustrated below:

Enthalpy of product (Hp) = 2 x 283

Enthalpy of product (Hp) = 566 kJ/mol

Finally, we shall determine the enthalpy change (∆H) for the reaction as follow:

Enthalpy of reactant (Hr) = 1410 kJ/mol

Enthalpy of product (Hp) = 566 kJ/mol

Enthalpy change (∆H) =?

Enthalpy change (∆H) = Enthalpy of product (Hp) – Enthalpy of reactant (Hr)

Enthalpy change (∆H) = 566 – 1410

Enthalpy change (∆H) = – 844 kJ/mol

Explanation:

Answer:

Volume percent is defined as: v/v % = [(volume of solute)/(volume of solution)] x 100%

Explanation:

Explanation:

C5H10O2 + NaOH = C2H5COONa + C2H5OH

your result are : sodium propanoate and ethanol

A balanced chemical equation represents atoms and their numbers with their charge. The balanced equation for base hydrolysis is C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH.

Base hydrolysis is the splitting of the ester linkage by the basic molecule. As the result the acidic ester portion makes the salt, and also alcohol is produced as the by-product.

The base hydrolysis of methyl butanoate is shown as,

C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH

Here, sodium propanoate and ethanol are produced by the splitting of methyl butanoate in the presence of the base (NaOH).

Therefore, C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH is balanced reaction.

Learn more about hydrolysis here:

https://brainly.com/question/22078321

#SPJ2

Answer:

[tex]V_2=1.17L[/tex]

Explanation:

Hello,

In this case, for dilution processes, we must remember that the amount of solute remains the same, therefore, we can write:

[tex]V_1C_1=V_2C_2[/tex]

Whereas V accounts for volume and C for concentration that in this case is %(m/v). In such a way, the final volume V2 turns out:

[tex]V_2=\frac{V_1C_1}{C_2}= \frac{0.551L*50.0\%}{23.5\%}\\ \\V_2=1.17L[/tex]

Best regards.

Answer:

The interpretation of the particular subject is covered in the subsection below in detail.

Explanation:

Answer:

They get more energy, so they vibrate!

Explanation:

Answer:

We can then determine that a reaction will shift to the right if Q<K

Explanation:

Comparing Q with K allows to find out the status and evolution of the system:

In this case, we can then determine that a reaction will shift to the right if Q<K

Answer:

Carbohydrate

Explanation:

A.pex

Answer:

Explanation:

This is a bit of a trick question.

Usually an exothermic reaction is written as

A + B - heat = C + D

The meaning of this equation is that when the bonds of the reactants break, heat has to be given away to the environment. On the left, exothermic means that heat has to be given.

The wording on this question means that heat is a product

A + B = C + D + heat.

In other words heat is given up to the environment. So this reaction is exothermic.

Answer:

0.032 moles

Explanation:

no of moles =

[tex] \frac{mass \: in \: grams}{relative \: molecular \: mass} [/tex]

=

[tex] \frac{2.4}{40 + 32 + 2} [/tex]

= 0.032

Calcium hydroxide reacted with nitric acid the total number of moles will be 0.032 moles.

A mole is Avogadro's number of particles, which is exactly 6.02214076×1023.

The mole is widely used in chemistry as a convenient way to express amounts of reactants and products of chemical reactions. For example, the chemical equation 2H2 + O2 → 2H2O can be interpreted to mean that for each 2 mol dihydrogen (H2) and 1 mol dioxygen (O2) that react 2 mol of water (H2O) form.

Number of moles = Mass of substance / Mass of one mole Number of moles

mass of substance = 2.4g

molar mass of calcium hydroxide is  (1 ×40.078g/mol Ca) +(2 × 15.999g/mol O) + (2 × 1.008g/mol H) = 74.092 g/mol Ca (OH)2

substituting the value,

number of moles = 2.4 / 74.029

                          = 0.032 moles

Therefore, moles of calcium hydroxide will be 0.032 moles

Learn more about moles, here :

https://brainly.com/question/15209553

#SPJ2

Answer:

Explanation:

We shall apply Arrhenius equation which is given below .

[tex]ln\frac{k_2}{k_1} = \frac{E_a}{R} [\frac{1}{T_1} -\frac{1}{T_2} ][/tex]

K₂ and K₁ are rate constant at temperature T₂ and T₁ , Ea is activation energy .

Putting the given values

[tex]ln\frac{5.9}{1} = \frac{39500}{8.3} [\frac{1}{298} -\frac{1}{T_2} ][/tex]

[tex].000373= [\frac{1}{298} -\frac{1}{T_2} ][/tex]

T₂ = 335.27 K

= 62.27 °C

The higher temperature is 62.27°C.

Given that the activation energy of the reaction is:

Eₐ =  39.5 kJ/mol

initial temperature T₁ = 25°C = 298K

Let the final temperature be T₂

The rate constant at temperature T₁ be K₁, and at a temperature T₂ be K₂.

According to the question: K₂/K₁ = 5.9

Now, applying the Arrhenius equation we get:

[tex]\ln\frac{K_2}{K1}=\frac{E_a}{R}[\frac{1}{T_1} -\frac{1}{T_2}]\\\\\ln(5.9)= \frac{39.5}{8.3}[\frac{1}{298} -\frac{1}{T_2}]\\\\0.000373=\frac{1}{298} -\frac{1}{T_2}[/tex]

T₂ = 335.27K

T₂ =  335.27 -273

T₂ = 62.27°C

Learn more about rate constant:

https://brainly.com/question/24658842?referrer=searchResults

Answer:

b. Use the periodic table to work out the charge (oxidation number) on the transition metal according to the group in the periodic table

Explanation:

The keyword in this problem us "transition metal". Transition metals are found between the group 2 and group 3 elements. They have the d sub shells and also exhibit variable oxidation numbers (valency).

Among the options, the incorrect option is option B.

This is because transition metals d not have  a fixed oxidation number and they cannot be obtained by looking up the group in the periodic table.

The iconic compounds obtain a transition of metal caution and a halon anon. As per the rules the correct name of the compounds should be written as to identify the incorrect one.

Learn more about the ionic compound containing a transition metal.

brainly.com/question/21578354.

Answer:

1.49e24

Explanation:

Standars temperature and pressure are 273.15K and 1atm, respectively.

Using ideal gas law, we can find moles of an ideal gas if we know its pressure, temperature and volume as follows:

PV = nRT

PV / RT = n

Where P is pressure (1atm), V is volume (55.3L), R is gas constant (0.082atmL/molK), T is temperature (273.15K) and n moles of the ideal gas.

Replacing:

PV / RT = n

1atm*55.3L / 0.082atmL/molK*273.15K = n

2.47 moles = n

Now, the question is about the number of molecules in the jar. By definition, 1 mole = 6.022x10²³ molecules.

As we have 2.47 moles:

2.47 mol × (6.022x10²³ molecules / 1 mole) =

1.49x10²⁴ molecules that are in the jar

In scientific notation:

Answer:

A

Explanation:

The change in entropy for the surroundings in a situation where heat flows from a hotter system to a cooler surrounding is Greater than Zero.

Here the randomness of the molecules increase as the temperature of the surrounding increases.( it absorbs heat from the system).

Answer:

Option a (Greater than zero) is the correct answer.

Explanation:

Some other three choices don't apply to either the situations in question. And the correct approach will be Options A.

Answer:

Krypton -73

Explanation:

There are 33 known isotopes of krypton (36Kr) with atomic mass numbers from 69 through 101.

Good luck!

Answer:

D. Krypton-73

Explanation:

An isotope of an element has the same atomic number and the same number of protons but a different number of neutrons and a different atomic weight. Krypton is the 36th element on the periodic table. It has 36 protons and 48 neutrons. Krypton-73 is one of 33 known isotopes of Krypton and is the only one that actually exists from the list of choices.

Hope that helps.

Answer:

d. HF(g)

Explanation:

Hello,

In this case, the standard entropy S° could be predicted by looking at the amount of bonds the compound has, thus, the fewer the number bonds, the lower the standard entropy, it means that d. HF(g) has lowest value as it has one bond only whereas methane has four bonds, water two bonds and ammonia three bonds.

Best regards.

Answer:

ethyl 3-ethoxy-3-hydroxy-2-isopropyl-5-methyl hexanoate

Explanation:

In this case, we have a very strong base (sodium ethoxide). Therefore, this compound will remove a hydrogen from ethyl 3-methyl butanoate generating a carbanion.

This carbanion, can attack another ethyl 3-methyl butanoate molecule on the carbonyl group generating a new C-C bond and producing a negative charge in the oxygen.

Then the ethanol can protonate the molecule generating an "OH" group and the ethoxide.

See figure 1

I hope it helps!

Answer:

a. Gly-Lys + Leu-Ala-Cys-Arg + Ala-Phe

b. Glu-Ala-Phe + Gly-Ala-Tyr

Explanation:

In this case, we have to remember which peptidic bonds can break each protease:

-) Trypsin

It breaks selectively the peptidic bond in the carbonyl group of lysine or arginine.

-) Chymotrypsin

It breaks selectively the peptidic bond in the carbonyl group of phenylalanine, tryptophan, or tyrosine.

With this in mind in "peptide a", the peptidic bonds that would be broken are the ones in the "Lis" and "Arg" (See figure 1).

In "peptide b", the peptidic bond that would be broken is the one in the "Phe" (See figure 2). The second amino acid that can be broken is tyrosine, but this amino acid is placed in the C terminal spot, therefore will not be involved in the hydrolysis.

Answer:

False

Explanation:

The reaction rate increases if the temperature also increases, as does the concentration of ractives or the presence of catalysts.

The reaction rate talks about how reagents are converted into products as a function of time, this process can take less or more depending on the factors to which the reaction is exposed.

The increasing temperature generates an increase in the kinetic energy of the particles, promoting their proximity and their reaction between them to be able to give the final product, so a faster reaction occurs, which is why it has promoted when the particles collide.

Answer:

Eªcell > 0; n = 2

Explanation:

The reaction:

I2 (s) + Pb (s) → 2 I- (aq) + Pb2+ (aq)

Is product favored.

A reaction that is product favored has ΔG < 0 (Spontaneous)

K > 1 (Because concentration of products is >>>> concentration reactants).

Eªcell > 0 Because reaction is spontaneous.

And n = 2 electrons because Pb(s) is oxidizing to Pb2+ and I₂ is reducing to I⁻ (2 electrons). Statements that are true are:

Answer:

5.92 g

Explanation:

Convert milliliters to liters.

217 mL = 0.217 L

Since molarity (M) is moles per liter(mol/L), multiply the molarity by the volume to find out how many moles you will need.

0.217 L × 0.246 M = 0.05338 mol

Now, convert the moles to grams using the molar mass.  The molar mass of calcium chloride is 110.98 g/mol.

0.05338 mol × 110.98 g/mol = 5.924 g ≈ 5.92 g

You will need 5.92 g of calcium chloride.

Answer:

Option B. 3–methylheptane.

Explanation:

To obtain the name of the compound given in the question above, we must

1. Determine the functional group of the compound.

2. Locate the longest continuous carbon chain. This gives the parent name of the compound.

3. Identify the substituent groups attached.

4. Locate the position of the substituent group attached by giving it the lowest possible count.

5. Combine the above to obtain the name.

Now let us name the compound given in the question above.

1. The compound is an alkane since it contains only single bond.

2. The longest continuous carbon chain is 7. Hence the parent name I the compound is heptane.

3. The substituent group attached is

—CH3 i.e methyl.

4. The substituent group attached is at carbon 3.

5. Therefore, the name of the compound is:

3–methylheptane.

Answer:

0.1957 moles of NaF

Explanation:

The Pb²⁺ and F⁻ are in equilibrium with PbF₂ as follows:

PbF₂(s) ⇄ Pb²⁺(aq) + 2F⁻(aq)

Where Ksp expression is:

Ksp = 4.0x10⁻⁸ = [Pb²⁺] [F⁻]²

A saturated solution contains the maximum possible amount of Pb²⁺ and F⁻. That is:

PbF₂(s) ⇄ Pb²⁺(aq) + 2F⁻(aq)

PbF₂(s) ⇄ X + 2X

Where X is amount of ions presents in solution

4.0x10⁻⁸ = [Pb²⁺] [F⁻]²

4.0x10⁻⁸ = [X] [2X]²

4.0x10⁻⁸ = 4X³

4.0x10⁻⁸/4 = X³

1.0x10⁻⁸ = X³

2.15x10⁻³M = X

That means initial concentration of Pb²⁺ is = X = 2.15x10⁻³M and [F⁻] = 2X = 4.30x10⁻³M

Now, using again Ksp, if you want a [Pb²⁺] = 1.0x10⁻⁶M, the [F⁻] you need is:

4.0x10⁻⁸ = [Pb²⁺] [F⁻]²

4.0x10⁻⁸ = [1.0x10⁻⁶M] [F⁻]²

0.04M = [F⁻]²

0.2M = [F⁻]

You need a final concentration of 0.2M of F⁻. As initial concentration was 4.30x10⁻³M and volume of the buffer is 1.00L, the moles of F⁻ = moles of NaF you must add are:

0.2M - 4.30x10⁻³M =

Answer: The sulphur hexafluoride will have a chemical formula of [tex]SF_6[/tex]

Explanation:

A covalent compound is a compound where the sharing of electrons takes place between two elements which are non-metals.

The naming of covalent compound is given by:

1. The less electronegative element is written first.

2. The more electronegative element is written second. Then a suffix is added with it. The suffix added is '-ide'.

3. If atoms of an element is greater than 1, then prefixes are added which are 'mono' for 1 atom, 'di' for 2 atoms, 'tri' for 3 atoms and so on.

Thus sulphur hexafluoride will have a chemical formula of [tex]SF_6[/tex]

Answer:

D. sf6

Explanation:

Answer: C. the same amount of energy as

Explanation:

A reversible reaction is a chemical reaction where the reactants form products that, in turn, react together to give the reactants back.

Reversible reactions will reach an equilibrium point where the concentrations of the reactants and products will no longer change.

[tex]A+B\rightleftharpoons C+D[/tex]

Thus if forward reaction is exothermic i.e. the heat is released , the backward reaction will be endothermic i.e. the heat is absorbed and in same amount.

The amount of energy released will be equal and opposite in sign to the energy absorbed in that reaction.

Answer:

C.) the same amount of energy as

Explanation:

I got it correct on founders edtell

Answer:

(a) Chromatography

(b) DNA fingerprinting

(c) Origin

(d) Sweet C consists of more colours than sweet D.

  ii. The speed of colours in sweet C are proportional to one another, while that of colours in D is not.

Explanation:

Chromatography is one of the physical method of separating mixtures. This process composed of the ability of the constituents in a mixture to separate by virtue of rate of movement through a medium, thus separates into constituents.

It can be used to determine the soluble constituents of a given mixture. And for purification purpose.

Answer:

a. 121 ml, b. 253 ml and c. 2.57 L.

Explanation:

The new volume can be calculated by using the Boyle's law equation:  

P1V1 = P2V2

In the equation, P1 and P2 are the initial and final pressures and V1 and V2 are the initial and final volumes for a real gas at constant temperature.  

a) Based on the given information, P1 = 755 mmHg, V1 = 125 ml, P2 = 780 mm Hg and V2 will be,  

V2 = P1V1/P2

V2 = 755 mmHg × 125 ml/780 mmHg

V2 = 121 ml

b) Based on the given information, P1 = 1.08 atm, V1 = 223 ml, P2 = 0.951 atm and V2 will be,  

V2 = P1V1/P2

V2 = 1.08 atm × 223 ml/0.951 atm

V2 = 253 ml

c) Based on the given information, P1 = 103 kPa, V1 = 3.02 L, P2 = 121 kPa and V2 will be,  

V2 = P1V1/P2

V2 = 103 kPa × 3.02 L/121kPa

V2 = 2.57 L

Answer:

The amount of heat that is absorbed when 3.11 g of water boils at atmospheric pressure is 7.026 kJ.

Explanation:

A molar heat of vaporization of 40.66 kJ / mol means that 40.66 kJ of heat needs to be supplied to boil 1 mol of water at its normal boiling point.

To know the amount of heat that is absorbed when 3.11 g of water boils at atmospheric pressure, the number of moles represented by 3.11 g of water is necessary. Being:

the molar mass of water is:

H₂O= 2* 1 g/mole + 16 g/mole= 18 g/mole

So: if 18 grams of water are contained in 1 mole, 3.11 grams of water in how many moles are present?

[tex]moles of water=\frac{3.11 grams*1 mole}{18 gramos}[/tex]

moles of water= 0.1728

Finally, the following rule of three can be applied: if to boil 1 mole of water at its boiling point it is necessary to supply 40.66 kJ of heat, to boil 0.1728 moles of water, how much heat is necessary to supply?

[tex]heat=\frac{0.1728 moles*40.66 kJ}{1 mole}[/tex]

heat= 7.026 kJ

The amount of heat that is absorbed when 3.11 g of water boils at atmospheric pressure is 7.026 kJ.