Calculate the amount of heat that must be absorbed by 10.0 g of ice at –20°C to convert it to liquid water at 60.0°C. Given: specific heat (ice) = 2.1 J/g·°C; specific heat (water) = 4.18 J/g·°C; ΔH fus = 6.0 kJ/mol.

Answers

Answer 1

Answer:

The amount of heat to absorb is 6,261 J

Explanation:

Calorimetry is in charge of measuring the amount of heat generated or lost in certain physical or chemical processes.

The total energy required is the sum of the energy to heat the ice from -20 ° C to ice of 0 ° C, melting the ice of 0 ° C in 0 ° C water and finally heating the water to 60 ° C.

So:

Heat required to raise the temperature of ice from -20 °C to 0 °C

Being the sensible heat of a body the amount of heat received or transferred by a body when it undergoes a temperature variation (Δt) without there being a change of physical state (solid, liquid or gaseous), the expression is used:

Q = c * m * ΔT

Where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation (ΔT=Tfinal - Tinitial).

In this case, m= 10 g, specific heat of the ice= 2.1 [tex]\frac{J}{g*C}[/tex] and ΔT=0 C - (-20 C)= 20 C

Replacing: Q= 10 g*2.1 [tex]\frac{J}{g*C}[/tex] *20 C and solving: Q=420 J

Heat required to convert 0 °C ice to 0 °C water

The heat Q necessary to melt a substance depends on its mass m and on the called latent heat of fusion of each substance:

Q= m* ΔHfusion

In this case, being 1 mol of water= 18 grams: Q= 10 g*[tex]6.0 \frac{kJ}{mol} *\frac{1 mol of water}{18 g}[/tex]= 3.333 kJ= 3,333 J (being kJ=1,000 J)

Heat required to raise the temperature of water from 0 °C to 60 °C

In this case the expression used in the first step is used, but being: m= 10 g, specific heat of the water= 4.18 [tex]\frac{J}{g*C}[/tex] and ΔT=60 C - (0 C)= 60 C

Replacing: Q= 10 g*4.18 [tex]\frac{J}{g*C}[/tex] *60 C and solving: Q=2,508 J

Finally, Qtotal= 420 J + 3,333 J + 2,508 J

Qtotal= 6,261 J

The amount of heat to absorb is 6,261 J

Answer 2

The amount of heat to absorb is 6,261 J.

Calculation for heat:

Heat required to raise the temperature of ice from -20 °C to 0 °C.

The formula for specific heat is used to calculate the amount of heat

Q = c * m * ΔT

Where,

Q =heat exchanged by a body,

m= mass of the body

c= specific heat

ΔT= change in temperature

Given:

m= 10 g,

specific heat of the ice= 2.1

ΔT=0 C - (-20 C)= 20 C

On substituting the values:

Q= 10 g*2.1  *20 C

Q=420 J

Heat required to convert 0 °C ice to 0 °C water.

The heat Q necessary to melt a substance depends on its mass m and on the called latent heat of fusion of each substance:

Q= m* ΔHfusion

Heat required to raise the temperature of water from 0 °C to 60 °C

m= 10 g,

Specific heat of the water= 4.18  

ΔT=60 C - (0 C)= 60 C

On substituting:

Q= 10 g*4.18  *60 C

Q=2,508 J

Thus, Qtotal= 420 J + 3,333 J + 2,508 J

Qtotal= 6,261 J

The amount of heat to absorb is 6,261 J

Find more information about Specific heat here:

brainly.com/question/13439286


Related Questions

Divers often inflate heavy duty balloons attached to salvage items on the sea floor. If a balloon is filled to a volume of 1.20 L at a pressure of 6.25 atm, what is the volume of the balloon when it reaches the surface?

Answers

Answer:

7.50 L

Explanation:

The balloon has a volume of 1.20 L (V₁) when the pressure at the sea floor is 6.25 atm (P₁). When it reaches the surface, the pressure is that of the atmosphere, that is, 1.00 atm (P₂). If we consider the gas to behave as an ideal gas and the temperature to be constant, we can calculate the final volume (V₂) using Boyle's law.

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁ / P₂

V₂ = 6.25 atm × 1.20 L / 1.00 atm

V₂ = 7.50 L

The front curve of a spectacle lens is called?

Answers

Answer:

Corrective lense or just lens.

Explanation:

f a substance has a half-life of 8.10 hr, how many hours will it take for 75.0 g of the substance to be depleted to 3.90 g?

Answers

Answer:

35 hrs

Explanation:

half life of the substance [tex]t_{1/2 }[/tex] = 8.1 hr

initial amount [tex]N_{0}[/tex] = 75 g

The final amount [tex]N[/tex] = 3.9 g

The time elapsed [tex]t[/tex] = ?

we use the relationship

[tex]N[/tex] = [tex]N_{0}[/tex] [tex](\frac{1}{2} )^{\frac{t}{t_{1/2} } }[/tex]

substituting values, we have

3.9 = 75 x [tex]\frac{1}{2}^{\frac{t}{8.1} }[/tex]

0.052 = [tex]\frac{1}{2}^{\frac{t}{8.1} }[/tex]

take the log of both side

log 0.052 = log  [tex]\frac{1}{2}^{\frac{t}{8.1} }[/tex]

log 0.052 = [tex]\frac{t}{8.1}[/tex] log 1/2

-1.284 =  [tex]\frac{t}{8.1}[/tex]  x -0.301

1.284 = 0.301t/8.1 =

1.284 = 0.0372t

t = 1.284/0.037 = 34.5 ≅ 35 hrs

Beginning with Na, record the number of energy levels, number of protons, and atomic radius for each element in period 3.

Answers

Answer:

Sodium, magnesium, aluminium, silicon, phosphorus, sulfur, chlorine, and argon are the elements of third period.

Explanation:

There are three energy levels in sodium atom. It has 11 electrons revolving around the nucleus. the atomic radius of sodium atom is 227 ppm. Magnesium, aluminium, silicon, phosphorus, sulfur, chlorine, and argon has also three energy levels like sodium because all these elements belongs to third period. There are 12 electrons present in magnesium, 13 in aluminium, 14 in silicon, 15 in phosphorus, 16 in sulfur, 17 in chlorine, and 18 electrons in argon. The atomic radius of magnesium atom is 173 ppm.  The atomic radius of aluminium atom is 143 ppm.  The atomic radius of silicon atom is 111 ppm.  The atomic radius of phosphorus atom is 98 ppm.  The atomic radius of sulfur atom is 87 ppm. The atomic radius of chlorine atom is 79 ppm and the atomic radius of argon atom is 71 ppm.

The intermolecular forces present in CH 3NH 2 include which of the following? I. dipole-dipole II. ion-dipole III. dispersion IV. hydrogen bonding

Answers

Answer:

I. dipole-dipole

III. dispersion

IV. hydrogen bonding

Explanation:

Intermolecular forces are weak attraction force joining nonpolar and polar molecules together.

London Dispersion Forces are weak attraction force joining non-polar and polar molecules together. e.g O₂, H₂,N₂,Cl₂ and noble gases. The attractions here can be attributed to the fact that a non -polar molecule sometimes becomes polar because the constant motion of its electrons may lead to an uneven charge distribution at an instant.

Dispersion forces are the weakest of all electrical forces that act between atoms and molecules. The force is responsible for liquefaction or solidification of non-polar substances such as noble gas an halogen at low temperatures.

Dipole-Dipole Attractions are forces of attraction existing between polar molecules ( unsymmetrical molecules) i.e molecules that have permanent dipoles such as HCl, CH3NH2 . Such molecules line up such that the positive pole of one molecule attracts the negative pole of another.

Dipole - Dipole attractions are more stronger than the London dispersion forces but weaker than the attraction between full charges carried by ions in ionic crystal lattice.

Hydrogen Bonding is a dipole-dipole intermolecular attraction which occurs when hydrogen is covalently bonded to highly electronegative elements such as nitrogen, oxygen or fluorine. The highly electronegative elements have very strong affinity for electrons. Hence, they attracts the shared pair of electrons in the covalent bonds towards themselves, leaving a partial positive charge on the hydrogen atom and a partial negative charge on the electronegative atom ( nitrogen in the case of CH3NH2 ) . This attractive force is know as hydrogen bonding.

Answer:

The intermolecular forces present in CH_3NH_2 includes

II. (ion-dipole) and IV. (hydrogen bonding)

Explanation:

The intermolecular forces present in CH_3NH_2 includes II. (ion-dipole) and IV. (hydrogen bonding)

It is a polar molecule due to NH polar bond and it can form Hydrogen bond also due to NH bond.

Interaction will be dipole- dipole and Hydrogen dispersion forces can always be taken into account.

For more information on intermolecular forces, visit

https://brainly.com/subject/chemistry

What's the name for the part of Earth made of rock?
A. Geosphere
B. Atmosphere
C. Hydrosphere
D. Biosphere
SUBMIT

Answers

Answer:I think it's Geosphere

Explanation:

Answer:

A

Explanation:

Geo means rock, or earth. Hydro means water, Atmosphere is space, and Bio global ecosystem composed of living organisms

Calculate the entropy change in the surroundings associated with this reaction occurring at 25∘C. Express the entropy change to three significant figures and include the appropriate units.

Answers

Answer:

That means that if you are calculating entropy change, you must multiply the enthalpy change value by 1000. So if, say, you have an enthalpy change of -92.2 kJ mol-1, the value you must put into the equation is -92200 J mol-1

The entropy change in the surroundings associated with this reaction occurring at 25 degree C is calculated as ΔS = -ΔH/T J/K.

What is entropy?

Entropy is a quantity which gives idea about the randomness or arrangement of atoms or molecules present in any sample.

Entropy change will be calculated as:
ΔS = -ΔH/T, where

ΔH = chnage in enthalpy (J/mole)

T = temperature (K)

So to calculate the entropy change first we have to know about the value of enthalpy in joules and then divide it by the temperature.

Hence the unit of entropy is joule per kelvin.

To know more about entropy, visit the below link:
https://brainly.com/question/6364271

To find the pH of a solution of NaNO2, one would have to construct an ICE chart using:
a. the Kb of NO−2 to find the hydroxide concentration.
b. the Kb of HNO2 to find the hydronium concentration.
c. the Kb of NO-2, to find the hydronium concentration.
d. the Kb of HNO2, to find the hydroxide concentration.

Answers

Answer:

a. the Kb of NO₂⁻ to find the hydroxide concentration.

Explanation:

When sodium nitrite is dissolved in water, it dissociates in sodium cation and nitrite anion according to the following equation.

NaNO₂(s) ⇒ Na⁺(aq) + NO₂⁻(aq)

Na⁺ comes from NaOH (strong base) so it doesn't react with water.

NO₂⁻ comes from HNO₂ (weak acid) so it reacts with water according to the following equation.

NO₂⁻(aq) + H₂O(l) ⇄ HNO₂(aq) + OH⁻(aq)

This is the basic reaction of nitrite ion, so we need the Kb of NO₂⁻ to  find the hydroxide concentration.

Ammonia, methane, and phosphorus trihydride are three different compounds with three different boiling points. Rank their boiling points in order from lowest to highest.
A. CH4< NH3 < PH3
B. NH3 < PH3< CH4
C. CH4 < PH3 < NH3
D. NH3 < CH4< PH3
E. PH3< NH3 < CH4

Answers

Answer:

B. NH3 < PH3< CH4

Explanation:

Hello,

In this case, taking into account that the boiling point of ammonia, methane and phosphorous trihydrate are -33.34 °C , -161.5 °C  and -87.7 °C , clearly, methane has the lowest boiling point (most negative) and ammonia the greatest boiling point (least negative), therefore, ranking is:

B. NH3 < PH3< CH4

Best regards.

The argon atoms are excited into an excited state before emitting the 488.0 nm laser. It is known that the energy of the first ionization energy of argon is 1520 kJ mol-1. What is the energy level of the excited state (in unit eV) lies below the vacuum energy level (0 eV)

Answers

Answer:

Explanation:

Given that:

The argon atoms are excited into an excited state before emitting the 488.0 nm laser.

the energy of the first ionization energy of argon is 1520 kJ mol-1.

SInce 1 eV = 96.49 kJ/mol

Therefore, the energy of the first ionization energy of argon in eV is = ( 1520/ 96.49) eV

=  15.75 eV

To find where  the energy level of the excited state lies below the vacuum energy level, let's first determine, the energy liberated by using planck expression.

[tex]E = \dfrac{hc}{\lambda}[/tex]

[tex]E = \dfrac{6.6 \times 10^{-34} \times 3 \times 10^8}{488 \times 10^{-9}}[/tex]

[tex]E = \dfrac{1.98 \times 10^{-25}}{488 \times 10^{-9}}[/tex]

[tex]E = \dfrac{1.98 \times 10^{-25}}{488 \times 10^{-9}}[/tex]

[tex]E =4.057 \times 10^{-19} \ J[/tex]

Converting Joules (J) to eV ; we get,

[tex]E =\dfrac{4.057 \times 10^{-19}}{1.6 \times 10^{-19}}[/tex]

E = 2.53 eV

The energy levels of the first exited state = -13.223 eV

A solution containing a unknown ionic compound, vigorously bubbles when hydrochloric acid (HCl) is added to the solution. This might indicate that the solution contains which anion?

Answers

Answer:

CO3^2-

Explanation:

In qualitative analysis, we try to use chemical reactions to determine the composition of an unknown substance. The addition of certain reagents to the unknown solution gives certain results that show the presence or absence of certain species from the unknown sample.

When dilute HCl is added to an unknown sample and effervescence is observed, then the unknown sample must contain CO3^2- or HCO3^-. The presence of these species is confirmed if the gas evolved is passed through limewater and the gas turns limewater milky.

Fireworks are chemical reactions that release energy. Which of these phenomena are caused by chemical reactions that release energy? If you’re not sure, make a guess.

Answers

Answer:

All chemical reactions involve energy. Energy is used to break bonds in reactants, and energy is released when new bonds form in products. Endothermic reactions absorb energy, and exothermic reactions release energy. The law of conservation of energy states that matter cannot be created or destroyed.

a. Name a chemical or product that was once considered safe but is now considered
harmful. (1 point)
-

Answers

Answer:

Bisphenol A (BPA)

Explanation:

Bisphenol A (BPA) is a chemical additive commonly found in resins and plastics, such as water bottles or food containers. It can also be found in household electronics, medical devices, dental fillings and sales receipts, just to name a few other applications.

105/22 • (1.251 - 0.620)=

Answers

Answer:

105/22*(1.251-0.620)

105/22*0.631

4.772*0.631

3.011132

Hope it helps

Answer:

3.0

Explanation:

First, complete the operations inside the parenthesis according to the normal rules for significant figures. Because there are subsequent calculations, keep at least one extra significant figure when possible: (4.7727) × (0.631).

The final product will be rounded to two significant figures because it can’t be more precise than the least precise number in the problem, 22. The final product is 3.0.

The ΔHvap of nitrous oxide is 16.53 kJ · mol−1 and its ΔSvap is 89.51 J · mol−1 · K−1. What it the boiling point of nitrous oxide?

Answers

Answer:

[tex]T_b=-88.48\°C[/tex]

Explanation:

Hello,

In this case, since the entropy of vaporization is defined in terms of the enthalpy of vaporization and the boiling point of the given substance, nitrous oxide, as shown below:

[tex]\Delta _{vap}S=\frac{\Delta _{vap}}{T_b}[/tex]

Solving for the boiling point of nitrous oxide, we obtain:

[tex]T_b=\frac{\Delta _{vap}H}{\Delta _{vap}S}=\frac{16.53\frac{kJ}{mol}*\frac{1000J}{1kJ} }{89.51\frac{J}{mol} } \\ \\T_b=184.67K[/tex]

Which in degree Celsius is also:

[tex]Tb=184.67-273.15\\\\T_b=-88.48\°C[/tex]

Best regards.

A piece of solid metal is put into an aqueous solution of . Write the net ionic equation for any single-replacement redox reaction. Assume that the oxidation state of in the resulting solution is 2 .

Answers

The question is incomplete,the complete question is as follows:

A piece of solid Fe metal is put into an aqueous solution of Cu(NO3)2. Write the net ionic equation for any single-replacement redox reaction that may be predicted. Assume that the oxidation state of in the resulted solution is 2 . (Use the lowest possible coefficients for the reaction. Use the pull-down boxes to specify states such as (aq) or (s). If a box is not needed, leave it blank. If no reaction occurs, leave all boxes blank and click on Submit.)

Answer:

Fe(s) + Cu^2+(aq) => Fe^2+(aq) + Cu(s)

Explanation:

An ionic equation is a chemical equation which shows clear image of reactions of the electrolytes in aqueous solution.

Molecular reaction equation for the reaction between iron and copper II nitrate is as follows:

Fe(s) + Cu(NO3)2(aq) => Fe(NO3)2(aq) +Cu(s)

The net ionic equation for any single-replacement redox reaction is as follows:

Fe(s) + Cu^2+(aq) => Fe^2+(aq) + Cu(s)

Consider the acid H3PO4. This acid will react with water by the following equation. H3PO4+H2O↽−−⇀H2PO−4+H3O+ What will be true of the resulting conjugate base H2PO−4? Select the correct answer below: H2PO−4 can act as an acid.

Answers

Answer:

H+/PO-4^-2

Explanation:

hydrogen has dissolved completely

In the given reaction conjugate base is H₂PO₄⁻, it also behave as a weak acid.

What is acid - conjugate base pair?

An acid and conjugate base pairs are those pairs in which they are differentiated by the one atom of hydrogen atom.

Given chemical reaction is:

H₃PO₄ + H₂O → H₂PO₄⁻ + H₃O⁺

In the above reaction H₃PO₄ is an acid as it gives H⁺ ion to the solution and formed H₂PO₄⁻, which is a conjugate base of H₃PO₄ acid. H₂PO₄⁻ will also behave as an acid because it have H⁺ ion to gives in the solution but nature of this acid is weak as they not readily dissociates.

Hence, H₂PO₄⁻ is a conjugate base.

To know more about acid-base pair, visit the below link:
https://brainly.com/question/14971866

21. What are the two main ways of working with clay?

Answers

Answer:

Diferentes tipos de arcilla

ARCILLA DE LADRILLOS. Contiene muchas impurezas. ...

ARCILLA DE ALFARERO. Llamada también barro rojo y utilizada en alfarería y para modelar. ...

ARCILLA DE GRES. Es una arcilla con gran contenido de feldespato. ...

ARCILLAS “BALL CLAY” O DE BOLA. ...

CAOLIN. ...

ARCILLA REFRACTARIA. ...

BENTONITA.

Explanation:

Answer:

Coil method and the slab method.

Explanation:

When 91.96g of Na reacts with 32.o g of O2 how many grams of NaO2 are produced

Answers

Answer:

123.96 g Na₂O

Explanation:

4 Na  +  O₂  ⇒  2 Na₂O

You first need to find the limiting reagent.  Convert the reactants to moles and see which produces the least amount of product using the mole ratios in the chemical equation.

(91.96 g Na)/(22.99 g/mol Na) = 4 mol Na

(4 mol Na) × (2 mol Na₂O/4 mol Na) = 2 mol Na₂O

(32.0 g O₂)/(32.0 g/mol) = 1 mol O₂

(1 mol O₂) × (2 mol Na₂O/1 mol O₂) = 2 mol Na₂O

Since they both produce the same amount of product, you don't need to pick a limiting reagent.  Now, convert moles of Na₂O to grams.

(2 mol Na₂O) × (61.98 g/mol Na₂O) = 123.96 g Na₂O

Sulfur dioxide reacts with oxygen to form sulfur trioxide. What change in hybridization of the sulfur occurs in this reaction ? g

Answers

Answer:

PLEASE LOOK INN TO THE FILE YOU WILL GET ANSWER AND ALSO SUMMARY THANKS FOR ASKING QUESTION.

Explanation:

2.Which of the alcohols listed below would you expect to react most rapidly with PBr3?A)CH3CH2CH2CH2CH2CH2OHB)(CH3CH2)2CH(OH)CH2CH3C)(CH3CH2)2CHOHCH3D)(CH3CH2)3COHE)(CH3CH2)2C(CH3)OH

Answers

Answer:

A) CH3CH2CH2CH2CH2CH2OH

Explanation:

For this question, we have the following answer options:

A) CH3CH2CH2CH2CH2CH2OH

B) (CH3CH2)2CH(OH)CH2CH3

C) (CH3CH2)2CHOHCH3

D) (CH3CH2)3COH

E) (CH3CH2)2C(CH3)OH

We have to remember the reaction mechanism of the substitution reaction with [tex]PBr_3[/tex]. The idea is to generate a better leaving group in order to add a "Br" atom.

The [tex]PBr_3[/tex] attacks the "OH" generation new a bond to P (O-P bonds are very strong), due to this new bond we will have a better leaving group that can remove the oxygen an allow the attack of the Br atom to generating a new C-Br bond. This is made by an Sn2 reaction. Therefore we will have a faster reaction with primary substrates. In this case, the only primary substrate is molecule A. So, "CH3CH2CH2CH2CH2CH2OH" will react faster.

See figure 1

I hope it helps!

Which of the following is required for the flow of current in all systems?
a) the presence of ions
b) an electrical potential ofo
c) a closed circuit
d) a short circuit

Answers

Answer:

I would say c) a closed circuit.

Hope I was right.

The reaction of butadiene gas (C4H6) with itself produces C8H12 gas as follows: The reaction is second order with a rate constant equal to 5.76 × 10−2 L/mol/min under certain conditions. If the initial concentration of butadiene is 0.200 M, what is the concentration in molarity remaining after 10.0 min? Report your answer to 3 decimal places.

Answers

Answer:

[tex]C_{C_4H_6}=0.179M[/tex]

Explanation:

Hello,

In this case, the undergoing chemical reaction is:

[tex]2C_4H_6\rightarrow C_8H_{12}[/tex]

And the rate law is:

[tex]\frac{dC_{C_4H_6}}{dt}=kC_{C_4H_6}^2[/tex]

Which integrated is:

[tex]\frac{1}{C_{C_4H_6}} =\frac{1}{C_{C_4H_6}^0}+kt[/tex]

In such a way, the concentration after 10.0 min is:

[tex]\frac{1}{C_{C_4H_6}} =\frac{1}{0.200M}}+5.76x10^{-2}\frac{L}{mol*min}*10.0min\\ \\\frac{1}{C_{C_4H_6}}=5.58\frac{L}{mol} \\\\C_{C_4H_6}=\frac{1}{5.58\frac{L}{mol} } \\\\C_{C_4H_6}=0.179M[/tex]

Regards.

A student sets up the following equation to convert a measurement. The (?) Stands for a number the student is going to calculate. Fill in the missing part of this equation. (0.030 cm^3) x ? =m^3

Answers

Answer:

\text{0.30 cm}^{3} \times \left (\dfrac{10^{-2}\text{ m}}{\text{1 cm}}\right )^{3} = 3.0 \times 10^{-7} \text{ m}^{3}  

Explanation:

0.030 cm³ × ? = x m³

You want to convert cubic centimetres to cubic metres, so you multiply the cubic centimetres by a conversion factor.

For example, you know that centi means "× 10⁻²", so  

1 cm = 10⁻² m

If we divide each side by 1 cm, we get 1 = (10⁻² m/1 cm).

If we divide each side by 10⁻² m, we get (1 cm/10⁻² m) = 1.

So, we can use either (10⁻² m/1 cm) or (1 cm/10⁻² m) as a conversion factor, because each fraction equals one.

We choose the former because it has the desired units on top.

The "cm" is cubed, so we must cube the conversion factor.

The calculation becomes

[tex]\text{0.30 cm}^{3} \times \left (\dfrac{10^{-2}\text{ m}}{\text{1 cm}}\right )^{3} = 0.30 \times 10^{-6}\text{ m}^{3} = \mathbf{3.0 \times 10^{-7}} \textbf{ m}^{\mathbf{3}}\\\\\textbf{0.30 cm}^{\mathbf{3}} \times \left (\dfrac{\mathbf{10^{-2}}\textbf{ m}}{\textbf{1 cm}}\right )^{\mathbf{3}} = \mathbf{3.0 \times 10^{-7}} \textbf{ m}^{\mathbf{3}}[/tex]


One gram is approximately the same as half the mass of a new U.S.
A) penny.
B) dime.
C) quarter.
D) dollar.

Answers

Answer:

b) dime

Explanation:

a dime is approximately 2.2g

half of this is 1.1g, which can be rounded down to one gram.

hope this helps

What would happen to the measured cell potentials if 30 mL solution was used in each half-cell instead of 25 mL

Answers

Answer:

The answer is "[tex]\bold{\log \frac{[0] mole}{[R]mole}}[/tex]"

Explanation:

[tex]E_{cell} =E_{cell}^{\circ} - \frac{0.0591}{n}= \log\frac{[0]}{[R]}\\[/tex]

In the above-given equation, we can see from [tex]E_{ceu}[/tex], of both oxidant [tex]conc^n[/tex]as well as the reactant were connected. however, weight decreases oxidant and reduction component concentration only with volume and the both of the half cells by the very same factor  and each other suspend

[tex]\to \log \frac{\frac{\text{oxidating moles}}{25 \ ml}}{\frac{\text{moles of reduction}}{25 ml}} \ \ = \ \ \log \frac{\frac{\text{oxidating moles}}{30 \ ml}}{\frac{\text{moles of reduction}}{30 ml}} \\\\\\[/tex]

[tex]\to {\log \frac{[0] mole}{[R]mole}}[/tex]

The cell potential of the electrochemical reaction has been the same when the volume has been reduced from 30 mL to 25 mL in each half cells.

The cell potential has been given as the difference in the potential of the two half cells in the electrochemical reaction.

The two cells has been set with the concentration of solutions in the oxidation and reduction half cells.

Cell potential change

The cell potential has been changed when there has been a change in the potential of the half cells.

The volume of 30 mL to the solution has been, resulting in the cell potential difference of x.

With the volume of 25 mL, there has been the difference in the potential being similar to the 30 mL solution, i.e. x.

Thus, the cell potential of the electrochemical reaction has been the same when the volume has been reduced from 30 mL to 25 mL in each half cells.

Learn more about cell potential, here:

https://brainly.com/question/1313684

Comparing the 2-bromobutane + methoxide and 2-bromobutane + t-butoxide reactions, choose the statements that BEST describe the data and mechanism. a. the mechanism for this reaction is E2 b. an increase in 1-butene was observed when t-butoxide was used c. an increase in 1-butene was observed when methoxide was used d. the mechanism for this reaction is E1 e. no significant difference was observed

Answers

Answer:

an increase in 1-butene was observed when t-butoxide was used

Explanation:

When a base reacts with an alkyl halide, an elimination product is formed. This reaction is an E2 reaction.

Here we are to compare the reaction of two different bases with one substrate; 2-bromobutane. Both reactions occur by the E2 mechanism but follow different transition states due to the size of the base.

The Saytzeff product, 2-butene, is obtained when the methoxide is used while the non Saytzeff product, 1-butene, is obtained when t-butoxide is used.

The Saytzeff rule is reliable in predicting the major products of simple elimination reactions of alkyl halides given the fact that a small/strong bases is used for the elimination reaction. Therefore hydroxide, methoxide and ethoxide bases give similar results for the same alkyl halide substrate. Bulky bases such as tert-butoxide tend to yield a higher percentage of the non Saytzeff product and this is usually attributed to steric hindrance.

What chemical bonds hold atoms?

Answers

bond: A link or force between neighboring atoms in a molecule or compound.
ionic bond: An attraction between two ions used to create an ionic compound. This attraction usually forms between a metal and a non-metal.
covalent bond: An interaction between two atoms, which involves the sharing of one or more electrons to help each atom satisfy the octet rule. This interaction typically forms between two non-metals.

An ice cube at 0.00C with a mass of 8.32g is placed Into 55g of water, initially at 25C. If no heat is lost to the surroundings, what is the final temperature of the entire water sample after all the ice is melted (answer must be in 3 sig figs)

Answers

Answer:

The final temperature of the entire water sample after all the ice is melted, is 12,9°C. We should realize that if there is no loss of heat in our system, the sum of lost or gained heat is 0.  It is logical to say that the temperature has decreased because the ice gave the water "heat" and cooled it

Thats all i know


How has the work of chemists affected the environment over the years?

Answers

Answer:

Chemistry is one of the causes for global warming, and in some cases it can even cause certain illnesses.

Answer:

Chemists have both hurt the environment and helped the environment by their actions.

Explanation:

<3

Other Questions
what are the possible polynomial expression for dimensions of the cuboid whose volume is 12y2 + 8y -20!!!!!plz answer fast Tyler and Jamie decide to share a box of 50 candy bars. To their pleasant surprise, there are 5 extra candy bars in the box. They agree that Tyler gets at least eight more candy bars than Jamie. What is the minimum number of candy bars that Tyler gets. Can I get a step by step explanation please? Thank you! In answering the question "Which customers are most likely to click on my online ads and purchase my goods?" you are most likely to use which of the following analytic applications?A) customer profitabilityB) propensity to buyC) customer attritionD) channel optimization f(x) = -3x + 7What is f (0)? JOURNEY TO THE CENTRE OF THE EARTH: what did professor get from the havellious bookshop?why he was so much excited. On December 1, 20X1, Tigg Mortgage Co. gave Pod Corp. a $200,000, 12% loan. Pod received proceeds of $194,000 after the deduction of a $6,000 nonrefundable loan origination fee. Principal and interest are due in 60 monthly installments of $4,450, beginning January 1, 20X2. The repayments yield an effective interest rate of 12% at a present value of $200,000 and 13.4% at a present value of $194,000. What amount of accrued interest receivable should Tigg include in its December 31, 20X1, balance sheet Let A and B be any two sets. Show that:Show that (AUB)', (BUA)' = 0 Change 06:00 to 12 hour clock time using a.m. and p.m.I will mark you as brainlist g A slot machine has three slots; each will show a cherry, a lemon, a star, or a bar when spun. The player wins if all three slots show the same three items. a. How many simple events are in the sample space Evaluate the expression. *23 (12 + 6) + 8Please help Bryan decides he wants to help pay for a birthday party for his little brother at the ice rink. It cost $50 to rent the party room and then $4 for each person attending. Bryan only has $100 to spend at the party. a) What are the constraints for this situation? b) Find the domain and range for this situation. Make sure you include all values for each using correct notation. Raj was concentrating so much while working on his project plan that he was late for a meeting. When he went back to his office, he noticed his system was restarted and his project file was not updated. What advice would you provide Raj in this situation? In a zoo there are 6 orang-utans for every 3 baboons. There are 27 orang-utans and baboons altogether. How many are orang-utans? ______ costs are administrative costs related to determining an order quantity, preparing purchase invoices, inspecting goods received for quality and quantity, and moving goods for temporary storage. Please help for the 4 and 5 question in the picture above.The person answering both part of question 4 and 5 will be marked as brainliest. I promise.The subject is hindi but there is no option so I opted for biology.but pls help. ____________ are the guiding principles and/or behaviors that embody your organization and how its people are expected to behave. Find the area of the following rectilinear figure. Triangle P Q R is shown. The length of P Q is 17, the length of Q R is 15, and the length of P R is 14. Law of cosines: a2 = b2 + c2 2bccos(A) What is the measure of AngleP to the nearest whole degree? 35 52 57 72 5 Sandeep bought 30 punnets of strawberries for 20. 1/6 of the punnets were rotten so he threw them away. He sold the remaining punnets for 1.50 each. Work out Sandeep's profit. 1)What is Big Data?2) What is machine learning?3) Give one advantage of Big data analytics.4) Give any one application of Big Data Analytics. 5) What are the features of Big Data Analytics?