Calculate the average atomic mass for element X(please help)

Answer:

Nice and you

Explanation:

Please Mark me brainliest

Answer:

0.723 moles (5 s.f.)

Explanation:

Whenever there is a chemical equation, ensure that it is balanced. This is because a balanced chemical equation tells us the mole ratio (not the ratio of their masses), which means the relationship of the number of moles of reactants or products with one another.

The chemical equation given has already been balanced. Looking at the coefficients of HBr and Ba(OH)₂, the mole ratio of HBr to Ba(OH)₂ is 2: 1.

• 1 mole of Ba(OH)₂ is needed to react with 2 mole of HBr

Find the number of moles of HBr present:

Number of moles= mass ÷mr

Amount of HBr

= 117 ÷(1 +79.9)

= 1.4462 moles (5 s.f.)

Since the amount of Ba(OH)₂ required is half the amount of HBr present,

amount of Ba(OH)₂ required

= 1.4462 ÷2

= 0.723 moles (3 s.f.)

Notes:

• mr

= relative molecular mass

= sum of relative atomic masses (which can be found in the periodic table) in a molecule

Sodium has a mass number of 23amu. Since sodium has 11 protons, the number of neutrons must be 23 – 11 = 12 neutrons.

Answer:

•cocoons are boiled in hot water for obtaining silk fibres from cocoons.

•camel wool considered a natural health product because it has excellent thermal proities

Answer:

heat energy to keep you warm and light energy to be able to read your book

Explanation:

Answer:

the reaction is spontaneous

Answer: The electronic configuration of selenium is [tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^4[/tex]

Explanation:

The atomic number is defined as the number of protons or number of electrons present in a neutral atom.

Number of electrons will be equal to the atomic number of an atom.

Electronic configuration is defined as the representation of electrons in an atom.

Selenium is the 34th element of the periodic table.

The electronic configuration of Selenium is [tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^4[/tex]

It has 6 electrons that are present in the outermost shell.

Answer:

39.02 amu

Explanation:

The average atomic mass of an element can be calculated as follows :

[tex]X=\dfrac{9.67\times 38+78.68\times 39+11.34\times 40+0.31\times 41}{100}\\\\X=\dfrac{3902.29}{100}\\\\X=39.02\ amu[/tex]

So, the atomic mass of the element X is 39.02 amu.

Answer:

The answer would be [HCIO][OH-]

_________

[CIO-]

Explanation:

So, the answer would be (b).

Answer:

0.067M H3PO4

Explanation:

H3PO4 reacts with NaOH as follows:

H3PO4 + 3NaOH → 3H2O + Na3PO4

Where 1 mole of H3PO4 reacts with 3 moles of NaOH

To solve trhis question we need to find the moles of NaOH required. With the chemical equation we can find the moles of H3PO4 and its concentration as follows:

Moles NaOH:

50.0mL = 0.0500L * (0.20moles /L) = 0.0100 moles NaOH

Moles H3PO4:

0.0100 moles NaOH * (1mol H3PO4 / 3mol NaOH) = 0.00333 moles H3PO4

Concentration:

0.00333 moles H3PO4 / 0.0500L = 0.067M H3PO4

Answer:

2HCl → H2 + Cl2 = decomposition

NaF + KBr → NaBr + KF = double replacement

Mg + MnCl2 → Mn + MgCl2 = single replacement

2Na + 02 → Na2O2 = combination

Explanation:

A chemical reaction involves the conversion of one or more substances called REACTANTS into other substances called PRODUCTS. There are different types of reactions depending on how it occurs, they include:

- Combination or synthesis reaction is a type of reaction in which two or more elements combine to form a single product. Example is:

2Na + 02 → Na2O2

- Single replacement is a type of reaction where one element is replaced by another in a compound or molecule. Example below shows that Manganese (Mn) is replaced by magnesium (Mg):

Mg + MnCl2 → Mn + MgCl2

- Double replacement is a type of reaction where two elements are replaced by other elements at a time. Example is:

NaF + KBr → NaBr + KF

- Decomposition is a type of reaction in which one molecule or compound is broken down into two or more products. Example is:

2HCl → H2 + Cl2

Answer:

infrared light

Explanation:

Answer:

-Aerospace Industry.

-Transport Industry.

-Computer Industry.

-Telecommunication industry.

-Agriculture industry.

-Construction Industry.

-Education Industry.

-Pharmaceutical Industry.

-Food Industry

-Health Care Industry

-Hospitality Industry

-Entertainment Industry

Answer:

hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water (Kw). The concentrations of these ions in a solution are often critical determinants of the solution’s properties and the chemical behaviors of its other solutes, and specific vocabulary has been developed to describe these concentrations in relative terms. A solution is neutral if it contains equal concentrations of hydronium and hydroxide ions; acidic if it contains a greater concentration of hydronium ions than hydroxide ions; and basic if it contains a lesser concentration of hydronium ions than hydroxide ions.

Answer:

hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water

Explanation:

Not my work! I hope this helps!  

Answer:

Ga3+ is a gallium cation

Answer:

C. Chemical reactions may have deteriorated the rubber

Explanation:

A tire ages with time and most of the time this happens due to chemical reactions in the rubber parts. This could happen faster due to heat and sun.

As a tire is deteriorating or aging, a chemical change happens. What happens is that more chemical bonds are going to be produced with time between the molecules. We call this the process of oxidation. This actually bad for the tire, because the rubber would turn out to be stuffs d strong causing the tires thread to separate and also disintegration would occur.

The question is incomplete, the complete question is:

Which statements are consistent with Dalton's atomic theory as it was originally stated? Why?

a. Sulfur and oxygen atoms have the same mass.

b. All cobalt atoms are identical.

c. Potassium and chlorine atoms combine in a 1:1 ratio to form potassium chloride.

d. Lead atoms can be converted into gold.

Answer: The correct options are b) and c).

Explanation:

Some of the postulates of Dalton's atomic theory are:

For the given options:

For a:

The statement is inconsistent with the theory as no two elements can have the same mass. Only atoms of the same element can have the same mass.

This is consistent with the theory as atoms of the same element are identical.

This is consistent with the theory as atoms combine in a simple whole number ratio.

The statement is inconsistent with the theory as atoms of one element cannot be changed to atoms of other element.

Hence, the correct options are b) and c).

The salt CaCl2 (calcium chloride) and water (H2O) are formed in this reaction. Also formed is the gas carbon dioxide (CO2) which may cause a bloated feeling in the stomach. The acid that is secreted in your stomach is approximately 0.1 M (moles per liter) hydrochloric acid.

I hope it helps ●~●

Answer:

sry I don't know the answer

Answer:

liter

Explanation:

I think liter because it is not listed as a SI unit

Answer:

[tex]{ \bf{d). \: { \tt{litre}}}}[/tex]

Answer:

A

Explanation:

Coupled reactions are reactions in which endergonic reactions obtain the energy to go forward from exergonic reactions.

When benzene diazonium chloride interacts with phenol, the para position of the phenol molecules is associated with the diazonium salt, resulting in

p-hydroxyazobenzene. The coupling reaction is the name given to this process.

Answer:

Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

hope it helps

Sulfur dioxide and nitrogen oxides can contribute to acid precipitation.

A pollutant is a chemical or biological substance which harms water, air, or land quality.

Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

Learn more  about the pollutants here:

https://brainly.com/question/16101020

#SPJ2

Answer:

474. 64 mm Hg

Explanation:

using Boyle's Law that is

P1. V1 = P2. V2

655 × 10 = P2 × 13. 8

[tex]P2 = \frac{655 \times 10}{13.8} [/tex]

P2 = 474. 64 mm Hg

[tex]\huge\fcolorbox{red}{pink}{Answer ♥}[/tex]

Solutions for Neutralization of Acidic Lakes. ... A common solution to increase water hardness in acid lakes is to add lime, a high-alkalinity calcium compound to the acid lakes. This method is only temporary and very expensive, as it often needs to be applied every year.

Hope it helps uh ✌️✌️

Answer:

c

Explanation:

Nh4OH + HCL ---> NH4Cl + H3O

so ph decreases as H3O increases

and OH also decreases

When NH4OH is added to a solution with HCI, the pH of the solution B ) increases as the OH- concentration increases.

NH₄OH is a strong base as a result of the presence of the OH compound which is a base as well. Bases have high pH and acids have low pH.

This means that as the OH- concentration increases, the solution is being made to be more basic which would lead to the pH rising.

In conclusion, option B is correct.

Find out more on Bases at https://brainly.com/question/15565260.

Answer:

[tex] moles = \frac{ number \: of \: particles}{6.02 \times {10}^{23} } [/tex]

=1.806×10^22/6.02×10^23

=0.03 moles

hope this helps :)

Answer:

ïgGshdhdhdhdhdbdhdhdjddk