Calculate the heat energy needed to change the temperature of 2 kg of copper from 10°C to 110°C.

If you could show your process and equations used, that would be very helpful! Thanks!

Answer:

P=mv

1x450,200=m40

m= 36,255kg

Answer:

0.47m3

Explanation:

Volume = Mass / Density

In this case:

Mass - 1280 kg

Density - 2700kg/m3

1280 / 2700 = 0.4740741m3

When this is rounded off ( 2 d.p ):

0.47 m3

HOPE THIS HELPED

This question is incomplete, the complete question is;

An air-filled capacitor stores a potential energy of 6.00 mJ due to its charge. It is accidentally filled with water in such a way as not to discharge its plates. How much energy does it continue to store after it is filled?

(The dielectric constant for water is 78 and for air it is 1.0006.)

Answer: it continue to store 0.07692 mJ after it was filled

Explanation:

Given that;

stored potential energy = 6.00 mJ = 0.006 J

dielectric constant for water K = 78

Energy stored  U = Q² / 2C = 0.006 J

C = ∈₀A/d { Air}

C = K∈₀A/d  { Water, k = 78 }

so

U = 0.006 / 78

U = 7.6723 × 10⁻⁵J

U = 0.07692 mJ

Therefore it continue to store 0.07692 mJ after it was filled

Answer:

210 ft.

Explanation:

Since a square has 4 sides and all sides are equal, just do 210 divided by 4.

Answer:2000kg

Explanation:

Convert it

Answer:

Explanation:

ACCELERATION = CHANGE IN VELOCITY

                                          TIME  TAKEN

∴ a = 25 - 0

         10.5

∴ a =   50    

           21    

by using f = ma,

we get , f =   3950 ×  50                                                                                  

                                     21

∴  A FORCE OF 9404.8 N IS NEEDED TO ACCELERATE A BUS OF 3950 KG.

Answer:

a) 37.70 m/s

b)710.6 m/s²

Explanation:

Given that ;

Mass of object = 2 kg

Radius of the motion = 2m

Frequency of motion = 3 rev/s

The formula to apply is;

v= 2πrf   where v is linear speed

v = 2×π×2×3 =12π = 37.70 m/s

Centripetal acceleration is given as;

a= 4×π²×r×f²  

a= 4×π²×2×3²

a=710.6 m/s²

Answer:

the second to last by the north pole

Explanation:

The satellite is moved to a new circular orbit that is 2R from the center of the moon, then the gravitational field strength of the moon at this new distance would be one-fourth of the initial gravitational field.

It can be defined as the force by which a body attracts another body toward its center as the result of the gravitational pull of one body and another.

As given in the problem A satellite of mass m orbits a moon of mass M in a uniform circular motion with a constant tangential speed of v. The gravitational field strength at a distance R from the center of the moon is gR. The satellite is moved to a new circular orbit that is 2R from the center of the moon.

The gravitational field strength is inversely proportional to the square of the distance from the center of the planet.

Thus, the gravitational field strength of the moon at this new distance would be one-fourth of the initial gravitational field.

To learn more about gravity here, refer to the link given below ;

brainly.com/question/4014727

#SPJ1

Answer:

(Total initial linear momentum = total final linear momentum.)

Momentum = mass × velocity

180×4 + 120×0 = 180×0 + 120×V

(180 ×4)/120 = V

Answer:189000J

Explanation:KE=1/2mv^2

1/2(420g)(30m/s)^2

=189000J

Answer:

option (a)

Explanation:

Maintaining distance while driving in traffic can avoid the chances of an accident.                        

When the driver is behind you is trying to pass you to avoid the collision you should maintain a distance greater than 3 sec.

Hence, option (a) is correct.

Answer:

a driver behind your vehicle is trying to pass you

Explanation:

took test and checked

Answer:

4770 N

Explanation:

Momentum is the product of mass and velocity and force is the change in momentum divided by change in time.

Given from the question;

Mass of arrow= 0.53 kg

Velocity of arrow = 63 m/s

Initial velocity of arrow = 0 m/s

Change in time = 0.007 s

Finding momentum after the arrow is released as;

p=m*v

p= 0.53 * 63

p= 33.39 kg*m/s

Force is the change in momentum divided by change in time;

F= 33.39 / 0.007

F= 4770 N

Answer:

The mass of the Planet X is 9.595 x 10²⁴ kg.

Explanation:

mass of the object, m = 0.5 kg

radius of the Planet X, r = 4 x 10⁶ m

weight of the object, W = F = 20 N

let the mass of the Planet  X = mₓ

Apply Newton's gravitational law;

[tex]F = \frac{Gmm_x}{r^2} \\\\m_x = \frac{Fr^2}{Gm} \\\\m_x = \frac{(20)(4\times 10^6)^2}{6.67 \times 10^{-11} \ \times \ 0.5} \\\\m_x = 9.595 \times 10^{24} \ kg[/tex]

Therefore, the mass of the Planet X is 9.595 x 10²⁴ kg.

Answer:

11. D

12. A

13. B

Explanation:

Answer:

c. joules per gram degree Celsius

Explanation:

edg 2021

Answer:

On the way to the Moon the Apollo astronauts reached a point where the. Moon's gravitational pull became stronger, than the Earth's. (a) Determine the distance of ...

Explanation:

Answer:

v = 24.49[m/s]    

Explanation:

We must remember that kinetic energy can be calculated by means of a mathematical expression, which relates kinetic energy to mass and velocity

[tex]E_{kin}=\frac{1}{2}*m*v^{2} \\[/tex]

where:

Ekin = kinetic energy = 12000 [J]

m = mass = 40 [kg]

v = velocity [m/s]

[tex]12000=\frac{1}{2} *40*v^{2}\\24000=40*v^{2}\\600=v^{2}\\v=\sqrt{600}\\v=24.49[m/s][/tex]

Answer:

i cant make funny joke

Explanation:

but i can be alive.

wait no, im failing at that currently.

Answer:

centripital acceleration= v^2/r

r = v^2/a

r=31.8×31.8/29

r=34.8703m

Explanation:

the maximum acceleration is obtained with minimum radius.

Answer: Three forces act significantly on a freely floating helium-

filled balloon: gravity, air resistance (or drag force), and a

buoyant force.

Explanation:

The air pressure on the bottom of the balloon is slightly higher than the air pressure on the top of the balloon (because of the altitude difference). This difference gives rise to the bouyant force. This force competes with gravity as the two main forces acting on the balloon. Every time your feet hit the ground when you are running, the ground hits your feet with an equal and opposite force. Newton’s third law explains how balloons and rocket engines work. When the neck of an inflated balloon is released, the stretched rubber material pushes against the air in the balloon. The air rushes out of the neck of the balloon.

Answer:

motion of an object—even if the object is maintaining a constant speed—still count as acceleration

Explanation:

Answer

I feel the answer is C because it could cause mental and physical trauma

Explanation:

Answer:

The energy used for the 30-day period is 4878000 kilojoules.

Explanation:

According to the power bill, 1355 kilowatt-hours was used over a 30-day period. A kilowatt-hour is equal to 3600 kilojoules. Then, we calculate the energy used, measured in kilojoules, is determined by simple rule of three:

[tex]E = 1355\,kWh\times \frac{3600\,kJ}{1\,kWh}[/tex]

[tex]E = 4878000\,kJ[/tex]

The energy used for the 30-day period is 4878000 kilojoules.

Answer:

d = 113.6 m

Explanation:

For this exercise, the first thing we must notice is that the speed of the laser beam in the fiber is constant, so we can use the uniform motion relationships to find the necessary distance

          v = d / t

let's reduce to SI units

         t = 557 ns = 557 10⁻⁹ s

         d = v t

         d = 2.04 10⁸ 557 10⁻⁹

         d = 1.136 102 m

         d = 113.6 m

This is the distance of the fiber for the laser to arrive with the desired delay

Answer:

a) The diagrams can be seen in the picture attached

(b) By comparing the diagrams we can conclude that the resultant R₁ = R₂ = R₃

Further explanation

Vector is quantity that has magnitude and direction.

One example of a vector is acceleration.

Acceleration is rate of change of velocity.

a = acceleration ( m/s² )

v = final velocity ( m/s )

u = initial velocity ( m/s )

t = time taken ( s )

d = distance ( m )

Let us now tackle the problem !

This problem is about Vector and Vector Diagram.

Given:

Vector A = -200 j

Vector B = -250 i

Vector C = (150 sin 30.0°) i + (150 cos 30.0°) j = 75 i + 75√3 j

Unknown:

R₁ = A + B + C = ?

R₂ = B + C + A = ?

R₃ = C + B + A = ?

Solution:

R₁ = A + B + C  = (-200 j) + (-250 i) + (75 i + 75√3 j)

R₁ = -175i + (75√3 - 200)j

R₂ = B + C + A = (-250 i) + (75 i + 75√3 j) + (-200 j)

R₂ = -175i + (75√3 - 200)j

R₃ = C + B + A  = (75 i + 75√3 j) + (-250 i) + (-200 j)

R₃ = -175i + (75√3 - 200)j

From the results above, it can be concluded that the resultants above produce the same results. This can be confirmed from the diagrams in the attachment.

Explanation:

Answer:Liquid water is denser than Ice.

Ice float on top of liquid water.

Explanation:

Just trust me

Answer:

Explanation:

B

Answer:

Polarization occurs when an electric field distorts the negative cloud of electrons around positive atomic nuclei in a direction opposite the field. Polarization P in its quantitative meaning is the amount of dipole moment p per unit volume V of a polarized material, P = p/V.

Explanation:

Answer:

Polarization occurs when an electric field distorts the negative cloud of electrons around positive atomic nuclei in a direction opposite the field. Polarization( P) in its quantitative meaning is the amount of dipole moment (p) per unit volume V of a polarized material, where P = p/V.