Answer:
The height of a column of ethanol is 13.1m
Explanation:
we begin by converting the density to SI unit= 0.789g/cm3* 1kg * [tex]100^{3}[/tex]* [tex]cm^{3}[/tex]
cm * 1000g * [tex]1^{3}m^{3}[/tex]
= 789kg/m3
converting pressure to SI unit= 1 atm =101325 Pa
hence P= hdg
g= 9.81 m/s2
making h the subject of the formula
h= P/dg
h= 101325Pa/ 789kg/m3 * 9.81 m/s2
h= 13.1m
A 15.8 g sample contains 3.60 g F, 4.90 g H, and 7.30 g C. What is the percent composition of hydrogen in this sample?
Answer: 22.7848% F or 23%
Explanation: %F = 3.6g/15.8g • 100% = 22.7848% F
The percentage composition of hydrogen in the given sample is equal to 31%.
What is percentage composition?The percentage composition of a given compound can be described as the ratio of the quantity of each element to the total quantity of individual elements in the compound multiplied by 100. The quantity can be measured in terms of grams of the elements present in the sample.
The percent composition is expressed in its composition in terms of all the elements present. Thus, it helps in the chemical analysis of any given compound.
The percentage composition is expressed using the following formula,
Percentage composition of E = (E/T) × 100
Where E represents the total quantity of element E present in the compound and T represents the total quantity of all the elements present in the compound.
Given, the mass of the F, H, and C is 3.60g, 4,90 g, and 7.30 g respectively.
The total mass of the given sample = 15.8 g
The mass of the hydrogen in the sample = 4.90 g
The percent composition of H = (4.90/15.8) × 100 = 31 %
Therefore, the percent composition of hydrogen in this sample is 31%.
Learn more about percent composition, here:
https://brainly.com/question/11952337
#SPJ2
Metals like potassium and sodium are kept in paroffin oil. Why?
Answer:
because they are high reactive to the air thats why we keep them in paroffin oil
PLEASE HELP ASAP!!!!!!!!
Answer:
ouch......it's kinda a practical question..
Answer: ?
Explanation: what was the answer?
3. If there were multiple products comment on finding the mixture melting point of the products. Does your sample appear to be a mixture or pure
Answer:
If there were multiple products, we can take each product and mixed with a sample of a pure compound that we suspect might be the same as the product. Then, we taking the melting point of this mixture that contains one of our product and pure sample. Then, we can observe the change in melting point, if there is no change in melting point or the melting stays in the same range of the pure compound. Then, the that product along with the pure sample are actually the same compound, not a mixture of two compounds. However, if the melting point for our pure sample compound changed or didn't stay in the same range after the mixing with on of our products. then we can conclude that this product and the pure sample are completely different compound, and indeed they are a mixture.
Calculate the numerical Kc value for the following reaction if the equilibrium mixture contains 0.51 M CO , 0.30 M H2 , 1.8 M CH4 , and 2.0 M H2O.
CO(g) + 3H2 (g) ⇌ CH4 (g) + H2O (g)
Show work
Answer:
uh i think this is the answer
Explanation:
why is the reaction of Iron and hydrochloric acid slow
Answer:
The chloride formed when iron reacts with hydrochloric acid is iron (II) chloride, also known as iron dichloride. The reaction between iron and hydrochloric acid is slower than the reaction with zinc, with much smaller hydrogen bubbles produced.
Answer:
The reaction of iron and hydrochloric acid is slow beacause When dilute Hydrochloric acid is added to iron filings, iron(II) chloride & hydrogen gas is produced. In this reaction iron displaces hydrogen from hydrochloric acid to form iron chloride & hydrogen gas this reaction is a single displacement reaction which reacts slowly.
Explanation:
It is known that oxygen contains 1 percent of the air. If 50 liters of wind, how much oxygen is needed? *
Answer:
25 PRECENT
Explanation:
In an electrically neutral atom, the number of
protons equals the number of neutrons.
protons equals the number of electrons.
neutrons equals the number of electrons.
A. Protons equals the number of neutrons
B. Protons equal the number of electrons
C. Neutrons equals the number of electrons
Answer: B
Answer:
B
Explanation:
because protons have a +1 charge and electrons have a -1 charge, so if an atom is neutral it must have the same amount of protons and neutrons
How many moles of carbon are in the sample?
Answer:
12.01 grams per mole
Explanation:
theres no sample or example so if theres grams of Carbon, convert it to moles using 12.01g/mol
different oil refineries in UAE
Answer:
Petroleum refinery capacity in the UAE 2009-2018
In 2018, the total production capacities of all refineries in the UAE were 1.13 metric barrels per day. Total total production capacity of the al-Ruwais refinery in the United Arab Emirates was approximately 817,000 metric barrels per day.
Both aldehydes and ketones contain a carbonyl group a functional group with a carbon oxygen double bond, hence the carbonyl in aldehydes and ketones forms sp²hybridization.
Answer:
Both aldehydes and ketones contain a carbonyl group a functional group with a carbon oxygen double bond, hence the carbonyl in aldehydes and ketones forms sp²hybridization.
Explanation:
The structure of carbonyl group is -C=O-
The hybridization of carbon can be identified by couting the number of surrounding atoms.
In carbonyl compounds, carbon is directly bonded with three atoms.
One is oxygen, and the other two are other carbons.
With oxygen carbon has a double bond.
Hence, this three corresponds to sp2 hybridization.
Thus, the given statement is correct.
1.25 X 10^24 molecules of chlorine gas react with sodium to form how many grams of sodium
chloride?
2Na + Cl2
--> 2NaCl
Answer:
241.28 g NaCl(s)
Explanation:
Given 1.25 x 10²⁴ molecules of Cl₂ = 1.25 x 10²⁴molecules Cl₂(g)/6.023 x 10²³ molecules/mole = 2.08 mole Cl₂(g)
2Na(s) + Cl₂(g) => 2NaCl(s)
excess 2.08mole ? mole
∴moles NaCl(s) formed from 2.08 moles Cl₂(g) = 2(2.08 mole NaCl(s))
= 4.16 mole NaCl(g) = 4.16 mole NaCl(s) x 58 g NaCl(s)/mole NaCl(s) = 241.28 g NaCl(s)
How many molecular of H2O and O2 are present in 8.5g of H2O2 ?
2H2O+O2--->2H2O2
8.5 gm H2O2=0.25 mole
hence H2O is also 0.25 mole i.e.4.5 gm
O2is 0.125 mole i.e.4 gm
A typical scuba tank has a volume of 11 liters and can support a diver for one hour. An adult breathes about 3 liters of air with each breath.
How can an 11-liter tank give a diver enough oxygen for one hour?
Answer:
The correct answer is - at high pressure a huge amount of gases can be stored in less volume.
Explanation:
We already know that pressure is inversely proportional to the volume of gas which means if we increase the pressure the volume of gas becomes less.
P = 1/V
So in the scuba divers tank, the oxygen is filled at very high pressure so the high amount of the oxygen can be filled in less volume and which will last for longer than a normal pressure tank can last.
how does liquid carbon dioxide connect to organic chemistry
please I need long answers
1. A) Calculate DO of water at 25 0 C, P 0 = 1.01x10 5 Pa; given: water vapor pressure (25 0 C) is 3.2x10 3 Pa and Henry constant of oxygen in water is 1.3x10 -8 mol/l.Pa b) How's DO content changed as increase or decrease water temperature? Explain.
Answer:
cfvgbhnjmk,
Explanation:
Balancing equations
1. __Na + __Oz -> __Na2O
Answer:
Balancing equations
1
[tex]4Na + O_{2} -> 2Na_{2}O[/tex]
What pollutants can contribute to acid precipitation and how are these pollutants generated?
Answer:
I don't know I don't know about question but I can try to find it
Explanation:
I don't know about question but I can try to find it
Question 1 of 10 What would be a good description of what activating prior knowledge means? O
A. Prior to reading, look at the end of the book or article.
O B. Before you read, recall knowledge you already have about the subject.
O C. Before you read, think about what you hope to learn.
O D. Before reading, find other material that is similar to what you are going to read
Answer:
B
Explanation:
Because activating prior knowledge means getting what you already know on the subject.
The most common carrier of communicable diseases are
a.cockroach
b.housefly
c.mosquito
d.spider
housefly
Explanation:
Because it one of the affective vector of disease carrier and it always roam towards wastes and dirty materials likely to get attracted . And it carries contagious disease from hospitals , infected patients , etc .
please help. need this asap!!
Answer:
E.....Na2I.,.
Explanation:
Cuz sodium has a Vallency..1......lodide has Vallency 2
What are the basic elements of selection of proffesion?describe any two
Answer:
overall I think one answer
I’ll mark you as brainlister
Someone please do a True or false of all of these
Answer:
1. False
2. True
3. False
4. False
5. True
6. False
7. True
8. True
9. True
Crystals of sodium chloride were prepared by the following method.
1 25.0 cm3
of dilute hydrochloric acid was accurately measured into a conical flask.
2 Aqueous sodium hydroxide was added until the solution was neutral. The volume of
sodium hydroxide added was measured.
3 The solution was evaporated and the crystals washed with approximately 15 cm3
of water.
Which row shows the pieces of apparatus used to measure the 25.0 cm3
of hydrochloric acid, the
volume of aqueous sodium hydroxide and the 15 cm3
of water?
Answer: the answer is C
IF U MIGHT NEED AN EXPLANATION FEEL FREE TO COMMENT
The laboratory equipment like the burette, pipette, and measuring cylinders are used in process of titration process. The solution of NaOH is added by the burette. Thus, option C is correct.
What is titration?Titration has been the analytical technique that uses the known and measured quantity of the solution to estimate the volume of another solution with an unknown volume and known molar concentration.
The laboratory equipment like burette, pipette, and measuring cylinders are used in measuring the volume in the titration process. The burette is filled with sodium hydroxide to measure its quantity.
The pipette is used to transfer the volume of the solution that is known (hydrochloric acid) and the measuring cylinder is used to measure the liquid (water) that is used in chemistry experiments.
Therefore, option C. pipette, burette, and measuring cylinder are the apparatus used in the titration process.
Learn more about titration, here:
https://brainly.com/question/10024565
#SPJ2
What type of a liquid will have a pH value equal to 7? (1 point)
Lead is a toxic metal that affects the central nervous system. A Pb-contaminated water sample contains 0.0012 % Pb by mass. What volume of the water in milliliters contains 100 mg of Pb
Answer:
8.3 × 10³ mL
Explanation:
Step 1: Calculate the mass of water that contains 100 mg of Pb
The concentration of Pb in the sample is 0.0012% by mass, that is, there are 0.0012 g of Pb every 100 g of water. The mass of water that contains 100 mg (0.100 g) of Pb is:
0.100 g Pb × 100 g Water/0.0012 g Pb = 8.3 × 10³ g Water
Step 2: Calculate the volume corresponding to 8.3 × 10³ g of water
Since the solution is diluted, we will assume the density of the sample is equal than the density of water (1 g/mL).
8.3 × 10³ g × 1 mL/1 g = 8.3 × 10³ mL
The volume of the water in milliliters contains 100 mg of Pb is;
V = 8.3 × 10³ mL
Volume of SolutionWe are given the concentration of Pb in the sample as 0.0012% by mass.
That means that there are 0.0012 g of Pb in every 100 g of water.
Thus, the mass of water that contains 100 mg (0.100 g) of Pb is calculated as;
(0.100 g Pb × 100 g of Water)/0.0012 g of Pb = 8.3 × 10³ g of Water
Now, we know that the density of water (1 g/mL) but we are not given the density of the sample.
Thus, since the solution is diluted we can equally say that;
Density of sample = 1 g/mL
Formula for Volume is;
V = mass/density
Thus;
V = 8.3 × 10³ g/1 g/mL
V = 8.3 × 10³ mL
Read more about Volume of solution at; https://brainly.com/question/17055828
2002040_MIJ COMP SCI 1_SEM 1 CR_PY
The three main types of scientific investigations are descriptive, comparative, and experimental. Which components
are included in all three types of investigations?
a scientific question
an independent variable
a dependent variable
a procedure
a control group
a conclusion
Answer:
a scientific question
Procedure
Conclusion.
Explanation:
Scientific investigation is usually carried out to explain and give answers to natural phenomenon. Now, this scientific investigation is performed through the three main types as described in the question.
With that being said, the most common parts of all types of investigation are :
1. Scientific question: In this stage, questions are usually asked on the basis of observation made which could be answered.
2. Procedure: In this stage, the dimension of the steps are followed to answer and test the scientific question.
3. Conclusion: This is the primary aim that we check when done with our sample values
what is the [h+] if the ph of a solution is 11.13
pls help
Explanation:
[tex][{H}^{ + }] = {10}^{ - pH} [/tex]
[tex] = {10}^{ - 11.13} [/tex]
[tex] = {10}^{ (- 11 - 0.13)} [/tex]
[tex] = {10}^{ - 0.13} \times {10}^{ - 11} [/tex]
[tex] = 0.741 \times {10}^{ - 11} \frac{mol}{litre} [/tex]
HOPE IT HELPS YOUdescribe the formation of ionic bonds in potassium chloride compound (5 marks)
Answer:
When the two atoms are in contact, potassium readily transfers its outer electron to chlorine which readily accepts it, resulting in both atoms achieving a state of eight outermost electrons. With this electron transfer, the ionic bond in KCl is formed.
