Calculate the kinetic energy of a mass 2kg moving with a velocity of 0.1m/s

The length of the brass at a temperature rise of 100 K is 2.0036 m

From the question given above, the following data were obtained:

Original length (L₁) = 2 m

Temperature rise (ΔT) = 100 K

Coefficient of linear expansion (α) = 18×10¯⁶ K¯¹

The final length of the brass can be obtained as follow:

α = L₂ – L₁ / L₁ΔT

18×10¯⁶ = L₂ – 2 / (2 × 100)

18×10¯⁶ = L₂ – 2 / 200

Cross multiply

L₂ – 2 = 18×10¯⁶ × 200

L₂ – 2 = 0.0036

Collect like terms

L₂ = 0.0036 + 2

L₂ = 2.0036 m

Thus, the length of the brass at a temperature rise of 100 K is 2.0036 m

Learn more: https://brainly.com/question/21983527

Answer:

the strength of the magnetic field is 3 x 10⁻⁵ T

Explanation:

Given;

velocity of the cosmic ray, v = 5 x 10⁷ m/s

force experienced by the ray, f = 1.7 x 10⁻¹⁶ N

angle between the ray's velocity and the magnetic field, θ = 45⁰

The strength of the magnetic field is calculated as;

[tex]F = qvB \ sin(\theta)\\\\B = \frac{F}{qv\times sin(\theta)} \\\\where;\\\\B \ is \ the \ strength \ of \ the \ magnetic \ field\\\\q \ is \ the \ charge \ of \ the \ cosmic \ ray \ proton = 1.602 \times 10^{-19} \ C\\\\B = \frac{1.7\times 10^{-16}}{(1.602 \times 10^{-19})\times (5\times 10^7) \times sin \ (45)} \\\\B = 3 \times 10^{-5} \ T[/tex]

Therefore, the strength of the magnetic field is 3 x 10⁻⁵ T

Answer:

A

Explanation:

respect the opinion of your friends

1433 km

Explanation:

Let g' = the gravitational field strength at an altitude h

[tex]g' = G\dfrac{M_E}{(R_E + h)^2}[/tex]

We also know that g at the earth's surface is

[tex]g = G\dfrac{M_E}{R_E^2}[/tex]

Since g' = (2/3)g, we can write

[tex]G\dfrac{M_E}{(R_E + h)^2} = \dfrac{2}{3}\left(G\dfrac{M_E}{R_E^2} \right)[/tex]

Simplifying the above expression by cancelling out common factors, we get

[tex](R_E + h)^2 = \dfrac{3}{2} R_E^2[/tex]

Taking the square root of both sides, this becomes

[tex]R_E + h = \left(\!\sqrt{\dfrac{3}{2}}\right) R_E[/tex]

Solving for h, we get

[tex]h = \left(\!\sqrt{\dfrac{3}{2}} - 1\right) R_E= 0.225(6.371×10^2\:\text{km})[/tex]

[tex]\:\:\:\:\:= 1433\:\text{km}[/tex]

Answer:

circles

A=7.07multiple 10-6 m2

I hope you understand and help

The area of the circular cross-section will be 7068 × [tex]10^{-6}m^{2}[/tex].

The measurement that represents the size of a region on a plane or curved surface is called an area.

A cross-section would be the non-empty point where a solid body intersects a plane in three dimensions or its equivalent in higher dimensions.

Given data:

Diameter = 3 × [tex]10^{-3} m[/tex].

It is known that. Diameter = 2 radius.

The area can be calculated by using the formula:

A = 1/4 [tex]\pi[/tex][tex]d^{2}[/tex] = 1/4 (3.14) [tex](3 * 10^{-3})^{2}[/tex]= 7068 × [tex]10^{-6}m^{2}[/tex].

To know more about area and cross-section

https://brainly.com/question/15541891

#SPJ2

Answer:

The final pressure in bar will be "[tex]\frac{10}{3} \ Bar[/tex]".

Explanation:

As we know,

PV = nRT

[tex]\frac{P_1}{T_1} =\frac{P_2}{T_2} =CONST[/tex]

then,

⇒ [tex]\frac{2 \ bar}{300 \ K} = \frac{P_2}{500 \ K}[/tex]

⇒ [tex]P_2=(\frac{2}{300}\times 500 )Bar[/tex]

        [tex]=\frac{10}{3} \ Bar[/tex]

Thus the above is the correct answer.

Answer:

a) required area is 1.1318 m²

b) the maximum potential difference that can be applied across the compactor is 1931.1 V

Explanation:

Given the data in the question;

dielectric constant εr = 2.35

distance between plates ( thickness ) d = 0.0785 mm = 7.85 × 10⁻⁵ m

dielectric strength = 49.5 MV/m

a)

given that capacity capacitor C = 0.3 uF = 0.3 × 10⁻⁶ F

To find the Area, we use the following the expression.

C = ε₀εrA / d

we know that The permittivity of free space, ε₀ = 8.854 x 10⁻¹²  (F/m)

we substitute

0.3 × 10⁻⁶ = [ (8.854 x 10⁻¹²) × 2.35 × A  ] /  7.85 × 10⁻⁵

A = [ (0.3 × 10⁻⁶) × (7.85 × 10⁻⁵) ] / [ 2.35 × (8.854 x 10⁻¹²) ]

A = 2.355 × 10⁻¹¹ / 2.08069 × 10⁻¹¹

A = 1.1318 m²

Therefore, required area is 1.1318 m²

b)

the maximum potential difference that can be applied across the compactor.

We use the following expression;

⇒ 1/2 × dielectric strength × thickness d

we substitute

⇒ 1/2 × ( 49.5 × 10⁶ V/m ) × ( 7.85 × 10⁻⁵ m )

⇒ 1931.1 V

Therefore, the maximum potential difference that can be applied across the compactor is 1931.1 V

Answer:

a) T = 0.5 s

b) v = 1.2π m/s ≈ 3.77 m/s

Explanation:

It makes two revolutions in one second so makes one revolution in ½ second

circumference of the circle is

C = 2πr = 0.6π m

which it traverses in one time period

0.6π m / 0.5 s = 1.2π m/s

To solve this, we must be knowing each and every concept related to speed and its calculations. Therefore, the angular speed of a model car moves round a circular path of radius 0.3m at 2 revolutions per secs is 3.77 m/.

Speed may be defined as the distance traveled by an item in the amount of time it requires to travel that distance. In other words, it measures how rapidly an item travels but does not provide direction.

Speed may be calculated in Science. The speed equation is a scientific formula that is used to calculate various types of speed.

Mathematically, the formula for speed can be given as

speed= distance/time

Values that are given

Time period= 0.5 s

Circumference = 2πr = 0.6π m

substituting all the given values in the above equation, we get

speed     =0.6π m / 0.5 s

On calculations, we get

              = 1.2π m/s

              =3.77 m/s

Therefore, the angular speed of a model car moves round a circular path of radius 0.3m at 2 revolutions per secs is 3.77 m/.

To learn more about speed, here:

https://brainly.com/question/13263542

#SPJ2

Answer:

[tex]_{18}^{39} } Ar[/tex]

Explanation:

The given equation shows the disintegration of an unstable isotope of chlorine to beta particle and Argon nucleus. The nucleus undergoes the emission of a beta particle to form a more stable nucleus of Argon.

[tex]_{17} ^{39} Cl[/tex] ⇒ [tex]_{-1}^{0} e[/tex] + [tex]_{18}^{39} } Ar[/tex]

Argon is a stable gas and is found in the group 8 on the periodic table of elements.

Answer:

Answer is below

Explanation:

39 18 Ar

Answer:

Explanation:

Kinematic equation

v = u + at

If UP is assumed to be the positive direction and we let gravity be 10 m/s² which will be in the downward direction so will be negative.

a) v = 6  + (-10)(0.5) = 1 m/s    the result is positive, so upward

b) v = 6  + (-10)(2) = -14 m/s    the result is negative, so downward

Answer:

a. solve for a

[tex]vf ^{2} = vo ^{2} + 2a(xf - xo) \\ 2a(xf - xo) = vf^{2} - vo ^{2} \\ a = \frac{vf^{2} - vo^{2} }{2(xf - xo)} \\ a = \frac{vf ^{2} - vo ^{2} }{2xf - 2xo} [/tex]

I hope I helped you ^_^

Answer:

For infrared and ultraviolet waves have different frequencies. Both types of wave can have harmful effects on human beings. Describe the harmful effects of infrared and ultraviolet waves, relating them to the frequencies of the waves. Medical studies indicate that prolonged IR exposure can lead to lens, cornea and retina damage, including cataracts, corneal ulcers and retinal burns, respectively. To help protect against long-term IR exposure, workers can wear products with IR filters or reflective coatings.When you look at the EM spectrum, UV waves are quite a bit smaller in wavelength than infrared, and x-rays/gamma rays are even smaller. Therefore, UV waves are probably causing more harm than infrared waves, and x-rays/gamma rays are probably doing even more damage.

                                              Thank You  

                                     Please mark me Brainliest

Infrared and ultraviolet waves have different frequencies. Infrared waves have lower frequencies and longer wavelengths, while ultraviolet waves have higher frequencies and shorter wavelengths.

Harmful effects of Infrared waves:

Infrared waves have lower frequencies and are often associated with heat radiation. Prolonged exposure to intense infrared radiation can lead to thermal burns and damage to the skin and eyes. Infrared radiation can also cause dehydration and overheating of the body, especially in hot environments. While infrared radiation is not as harmful as ultraviolet radiation, excessive exposure can still lead to health issues.

Harmful effects of Ultraviolet waves:

Ultraviolet waves have higher frequencies and shorter wavelengths, making them more energetic than infrared waves. UV radiation from the sun is a well-known harmful agent. Short-term exposure to intense UV radiation can cause sunburn, skin redness, and eye irritation. Long-term exposure to UV radiation can lead to more serious health problems such as skin aging, cataracts, and an increased risk of skin cancer. UV radiation can also damage DNA in skin cells, leading to mutations and potential carcinogenesis.

It is essential to protect ourselves from both infrared and ultraviolet waves to prevent harmful effects. Using sunscreen and wearing protective clothing can help shield the skin from UV radiation. Limiting exposure to intense sources of infrared radiation, such as hot objects or infrared heaters, can help reduce the risk of thermal burns and overheating. Understanding the differences in the frequencies of these waves allows us to implement appropriate safety measures and protect our health.

To learn more about Infrared and ultraviolet waves, here

https://brainly.com/question/3091095

#SPJ2

Answer:

F' = 16 F

Hence, the electric force between charges becomes sixteen times its initial value.

Explanation:

The electric force between the two charges is given by the Colomb's Law:

[tex]F = \frac{KQ_1Q_2}{R^2}[/tex] ------------------- eq(1)

where

F = electric force

K = Colomb's Constant

Q₁ = magnitude of the first charge

Q₂ = magnitude of the second charge

R = Distance between charges

Now the magnitudes of the charges are doubled and the distance between them is halved. Therefore:

[tex]F' = \frac{K(2Q_!)(2Q_2)}{(\frac{R}{2})^2}\\\\F' = 16 \frac{KQ_1Q_2}{R^2}[/tex]

using equation (1):

F' = 16 F

Hence, the electric force between charges becomes sixteen times of its initial value.

There are broadly 3 states of matter (there are 5, but they don't teach 2 of them at school).

1. Solid

Examples: Iron, wood, steel, ice, paper

2. Liquid

Examples: Water, mercury, milk, soup, juice

3. Gas

Examples: Oxygen, Chlorine, Carbon dioxide, Sulphur dioxide, Nitrogen

Answer:

100Hz

Explanation:

In a full wave rectifier, the fundamental frequency of the ripple is twice that of input frequency. Given the input frequency of 50 Hz, the fundamental frequency will be 2 × 50 = 100Hz

Answer:

HZ 100 is the right answer hope you like it

Answer:

10.01 cm

Explanation:

Given that,

The time delay between transmission and the arrival of the reflected wave of a signal using ultrasound traveling through a piece of fat tissue was 0.13 ms.

The average propagation speed for sound in body tissue is 1540 m/s.

We need to find the depth when the reflection occur. We know that, the distance is double when transmitting and arriving. So,

[tex]v=\dfrac{2d}{t}\\\\d=\dfrac{vt}{2}\\\\d=\dfrac{1540\times 0.13\times 10^{-3}}{2}\\\\d= $$0.1001\ m[/tex]

or

d = 10.01 cm

So, the reflection will occur at 10.01 cm.

Answer:

It was an apparently temporary feature about the size of Earth, similar to the Great Red Spot of Jupiter, but disappeared within a few years.

Explanation:

The Great Dark Spot of Neptune was an immense spinning storm in the southern atmosphere of Neptune. The size of the entire Earth, it had the strongest winds ever recorded on any planet in the solar system. It was discovered by the Voyager 2 spacecraft in 1989, but by 1994 the Hubble Space Telescope saw it was gone.

The Great Red Spot is a storm found in Jupiter's southern hemisphere, with similar characteristics to the Great Dark Spot.

The least distance up to which we can see the objects clearly without any strain is called least distance of distinct vision. Least distance of distinct vision for a normal human being is 25cm. For young people, the least distance of distant vision will be within 25cm which however it varies with age.

Answer:

25 you said ? thats incorecct

Explanation:

Answer:

(a) The spring constant is 59.23 N/m

(b) The total energy involved in the motion is 0.06 J

Explanation:

Given;

mass, m = 240 g = 0.24 kg

frequency, f = 2.5 Hz

amplitude of the oscillation, A = 4.5 cm = 0.045 m

The  angular speed is calculated as;

ω = 2πf

ω = 2 x π x 2.5

ω = 15.71 rad/s

(a) The spring constant is calculated as;

[tex]\omega = \sqrt{\frac{k}{m} } \\\\\omega ^2 = \frac{k}{m} \\\\k = m\omega ^2\\\\where;\\\\k \ is \ the \ spring \ constant\\\\k = (0.24) \times (15.71)^2\\\\k = 59.23 \ N/m[/tex]

(b) The total energy involved in the motion;

E = ¹/₂kA²

E = (0.5) x (59.23) x (0.045)²

E = 0.06 J

Answer:

7.28×10⁻⁵ T

Explanation:

Applying,

F = BILsin∅............. Equation 1

Where F = magnetic force, B = earth's magnetic field, I = current flowing through the wire, L = Length of the wire, ∅ = angle between the field and the wire.

make B the subject of the equation

B = F/ILsin∅.................. Equation 2

From the question,

Given: F = 0.16 N, I = 68 A, L = 34 m, ∅ = 72°

Substitute these values into equation 2

B = 0.16/(68×34×sin72°)

B = 0.16/(68×34×0.95)

B = 0.16/2196.4

B = 7.28×10⁻⁵ T

2. two dimensional motion

Because it has just 2 dimensions x and y

Answer:

The wavelength stays the same.

Explanation:

When the amplitude is increased, the wavelength stays the same.

Here the wavelength doesn't depend upon the amplitude.

Answer:

Minimum area of rectangle = 24 centimeter²

Explanation:

Given:

Length of rectangle = 6 centimeter

Width of rectangle = 4 centimeter

Find:

Minimum area of rectangle

Computation :

Minimum area of rectangle = Length of rectangle x Width of rectangle

Minimum area of rectangle = 6 x 4

Minimum area of rectangle = 24 centimeter²

Answer:

(a) 1.2 rad/s

(b) 1.8 rad

Explanation:

Applying,

(a) α = (ω-ω')/t................ Equation 1

Where α = angular acceleration, ω = final angular velocity, ω' = initial angular velocity, t = time.

From the question,

Given: α = 0.40 rad/s², t = 3 seconds, ω' = 0 rad/s (from rest)

Substitute these values into equation 1

0.40 = (ω-0)/3

ω = 0.4×3

ω = 1.2 rad/s

(b) Using,

∅ = ω't+αt²/2.................. Equation 2

Where ∅ = angle turned.

Substitutting the values above into equation 2

∅ = (0×3)+(0.4×3²)/2

∅ = 1.8 rad.

Complete question is;

One ball is projected in the upward direction with a certain velocity ‘v’ and other is thrown downwards with the same velocity at an angle θ.

The ratio of their potential energies at highest points of their journey, will be:

Answer:

u² : (u cos θ)²

Explanation:

Maximum potential energy for the first ball will be at a maximum height of;

H = u²/2g

Thus;

PE = mg(u²/2g)

For second ball at an angle θ, maximum PE will occur at a max height of (u cos θ)²/2g

PE = mg((u cos θ)²/2g)

The ratios of the potential energies are;

mg(u²/2g) : mg((u cos θ)²/2g)

mg will will cancel out since they are of same mass.

Thus;

(u²/2g) : (u cos θ)²/2g

Again 2g will cancel out to give;

u² : (u cos θ)²

Answer:

45

Explanation:

ft/sec2