Calculate the mass in grams for 2.28 moles of N2?

Answer:

0.696 atoms of oxygen

Explanation:

We'll begin by calculating the number of mole in 50 g of scheelite CaWO₄. This can be obtained as follow:

Mass of CaWO₄ = 50 g

Molar mass of CaWO₄ = 40 + 184 + (4×16)

= 40 + 184 + 64

= 288 g/mol

Mole of CaWO₄ =?

Mole = mass / Molar mass

Mole of CaWO₄ = 50 / 288

Mole of CaWO₄ = 0.174 mole

Finally, we shall determine the number of oxygen atom in 50 g (i.e 0.174 mole) of CaWO₄. This can be obtained as follow:

1 mole of CaWO₄ contains 4 atoms of oxygen.

Therefore, 0.174 mole of CaWO₄ will contain = 0.696 atoms of oxygen.

Thus, 50 g (i.e 0.174 mole) of CaWO₄ contains 0.696 atoms of oxygen.

Answer:

3

Explanation:

For numbers with decimals, count the number after the decimal.

Joseph Priestly is frequently credited with the discovery of oxygen, and was reported to have produced molecular oxygen from the decomposition reaction of mercury(II) oxide, which is the reverse of the synthesis of HgO depicted in the following equation. [tex]4Hg(l)+2O_2(g)\rightarrow 4 HgO(s) [/tex]Determine the value of [tex]\Delta ΔH°rxn[/tex] for the synthesis, given that [tex]\Delta H_f^0[/tex] for HgO is -90.7 kJ/mol.

Answer: The enthalpy change for this reaction is, -362.8 kJ

Explanation:

The balanced chemical reaction is,

[tex]4Hg(l)+2O_2(g)\rightarrow 4HgO(s)[/tex]

The expression for enthalpy change is,

[tex]\Delta H=\sum [n\times \Delta H_f(product)]-\sum [n\times \Delta H_f(reactant)][/tex]

[tex]\Delta H=[(n_{HgO}\times \Delta H_{HgO})]-[(n_{O_2}\times \Delta H_{O_2})+(n_{Hg}\times \Delta H_{Hg})][/tex]

where,

n = number of moles

[tex]\Delta H_{O_2}=0[/tex] (as heat of formation of substances in their standard state is zero

[tex]\Delta H_{Hg}=0[/tex] (as heat of formation of substances in their standard state is zero

Now put all the given values in this expression, we get

[tex]\Delta H=[(4\times -90.7)]-[(2\times 0)+(4\times 0)][/tex]

[tex]\Delta H=-362.8kJ[/tex]

Therefore, the enthalpy change for this reaction is, -362.8 kJ

Answer:

2.9moles of hydrogen gas

Explanation:

convert liters to dm³

since 1liter= 1dm³

thus, 65.0liters = 65.0dm³

number of moles = volume given/22.4dm³

= 65.0/22.4

=2.9moles

Answer:

Lead

Explanation:

The subatomic particles within an atom can be used to know the atom or element given.

Of particular interest is the number of protons within the atom.

The periodic table is based on the atomic number of atoms. This atomic number is the number of protons within an atomic space.

So; If we know the number of protons within an atom, we can know the element.

The number of protons given is 82, the element is  therefore lead.

Answer:

The atomic number of polonium is 84. The atomic number lead is 82.

Explanation:

Answer:

In advance

middle

lower

Explanation:

These are the safety precautions needed when carrying out duties in the fume hood.

When planning and preparing to work in a fume hood (a locally designed area to reduce exposure to hazardous fumes). It is advisable to make all equipment readily available at your disposal in advance to reduce and minimize the raising and lowering of the hood sash at intervals.

It is also pertinent to understand that working in the middle of the work surface helps to promote the movement of air and keeps the area neat and tidy.

However, if any case where there is a need to get a new tool or equipment during the process of working in a fume hood, it is advisable to lower the sash at that point in time.

Answer:

Solution A: 0.00400M

Solution B: 0.00400M

Solution C: 4.00x10⁻⁵M

Explanation:

Solution A is diluting the 0.100M NaCl from 10mL to 250mL. That is:

250mL / 10mL = 25 times.

That means molar concentration of sln A is:

0.100M / 25 = 0.00400M

Solution B is obtained diluting 25mL to 100mL:

100mL / 25mL = 4 times

0.00400M / 4 times = 0.00100M

And solution C is obtained diluting the solution C from 20mL to 500mL:

500mL / 20mL = 25 times

Solution C:

0.00100M / 25 times = 4.00x10⁻⁵M

The formula for serial dilution can be used to obtain the molarity of solution A, B , C.

M1V1 = M2V2

M2 = 0.100 M ×  10 mL/250-mL

M2 = 0.004 M

M1V1 = M2V2

M2 = 0.004 M × 25 mL/100-mL

M2 = 0.001 M

M1V1 = M2V2

M2 = 0.001 M × 20 mL/500-mL

M2 = 0.00004 M

Learn more about serial dilution: https://brainly.com/question/2167827

Answer:

th relative ability of a solute to devolve into a solvent

Answer:

Explanation:

Nitric oxide is the gas NO, it reacts with oxygen as shown below;

2NO(g) + O2(g) -----> 2NO2(g)

Now the gas formed is the gas NO2 which is known to be reddish brown in colour.

A diagrammatic representation of this reaction is shown in the image attached to this answer.

Image credit: Chemlibretext

Answer:

% Free space in water = [tex]\frac{9.945* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.45%

% Free space in ice  = [tex]\frac{9.98* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.8%

Explanation:

As given ,

Density for ice at 0⁰C = 0.917 g/ml

Density for water at 0⁰C = 0.999 g/ml

Radii of H atoms = 37 pm

Radii of O atoms = 66 pm

Now,

Consider 1 ml of water = 1 cm²

As , we know that mass of water in 1 cm² = 0.999 g

Moles of water = [tex]\frac{0.999}{18} = 0.056[/tex]

Volume of H₂O = 1.624×[tex]10^{-31}[/tex] m²

Now,

Volume occupied by water = 0.056×6.022×[tex]10^{23}[/tex]× 1.624×[tex]10^{-31}[/tex] m²

                                              = 5.48×[tex]10^{-9}[/tex] m²

⇒Volume occupied by water = 5.48×[tex]10^{-9}[/tex] m²

Now,

Free space = 1×[tex]10^{-6}[/tex]  - 5.48×[tex]10^{-9}[/tex] = 9.95×[tex]10^{-7}[/tex] m²

% Free space = [tex]\frac{9.945* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.45%

Now,

Consider 1 ml of ice  = 1 cm²

S.I unit of ice = 1×[tex]10^{-6}[/tex] m²

As , we know that mass of water in 1×[tex]10^{-6}[/tex] m² = 0.917 g

Moles of ice = [tex]\frac{0.917}{18} = 0.012[/tex]

Volume of H₂O = 6.022×[tex]10^{23}[/tex] ×0.012

Volume of ice unit = [tex]\frac{4}{3} \pi (37*10^{-12})^{3} *2 + \frac{4}{3} \pi (66*10^{-12})^{3} = 1.624*10^{-31}m^{3}[/tex]

Now,

Volume occupied by water = 0.012×6.022×[tex]10^{23}[/tex]× 1.624×[tex]10^{-31}[/tex] m²

                                              = 1.17×[tex]10^{-9}[/tex] m²

⇒Volume occupied by water = 1.17×[tex]10^{-9}[/tex] m²

Now,

Free space = 1×[tex]10^{-6}[/tex]  - 1.17×[tex]10^{-9}[/tex] = 9.98×[tex]10^{-7}[/tex] m²

% Free space = [tex]\frac{9.98* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.8%

Explanation:

H2SO3 is more acid than H2TeO3. Since S is more electronegative than Te is. In H2SO3, thus, dissociation of H+ would be smoother.

So, H2SO3's got high Ka.

HCH3SO2 is more acid than HCH3CO2. Since S is more electronegative than C. So, HCH3SO2 is a high Ka.

HClO2 is more acid than HClO. Since in HClO2, after the donation of H+ ion, the negative charge is set by two oxygen atoms, while in HClO, only one oxygen atom stabilizes the negative charge.

So, HClO2 is a high Ka

Answer:

In the 5th cycle rinse, the residual concentration of the solution is < 0.00001M

Explanation:

In each rinse cycle, the dilution that you are doing of the solution is from 1.00mL to 10.00mL, that is a dilution of 10

In the first rinse the concentration must be of 0.9M  10 = 0.09M

2nd = 0.009M

3rd = 0.0009M

4th = 0.00009M

5th = 0.000009M →

Answer:

Molarity: 0.21M

Molality: 0.20m

Explanation:

...dissolves 3.9g of aniline (C6H5NH2) in 200.mL of a solvent with a density of 1.05 g/mL...

To solve this question, we need to find the moles of aniline in 3.9g using its molar mass. Then, we need to find the kg and Liters of solution in order to find molarity (Moles/L solution) and molality (Moles/kg of solvent):

Moles aniline:

Molar mass:

6C: 6* 12.01g/mol = 72.06g/mol

7H: 7*1.008g/mol = 7.056g/mol

N: 1*14.007g/mol = 14.007g/mol

72.06g/mol+7.056g/mol+14.007g/mol = 93.123g/mol

Moles of 3.9g: 3.9g * (1mol / 93.123g) = 0.04188moles

Liters solution:

200mL * (1L / 1000mL) = 0.200L

kg solvent:

200mL * (1.05g/mL) * (1kg/1000g) = 0.210L

Molarity:

0.04188mol / 0.200L = 0.21M

Molality:

0.04188mol / 0.210L =0.20m

Answer:

The cycling of matter is important to many Earth processes and to the survival of organisms the existing matter must cycle continuously for this planet to support life Water, carbon, nitrogen, phosphorus, and even rocks move through cycles If these materials did not cycle, Earth could not support life.

Explanation:

Earth activities depend on matter cycling, and for organisms to survive, this planet's surface must cycle with the flow of matter.

Rocks, as well as water, carbon, nitrogen, and phosphorus, go through cycles. The planet Earth could not support life if these materials did not cycle.

Subsystems exist within the Earth system. These subsystems include the exosphere, atmosphere, hydrosphere, lithosphere and geosphere, also referred to as the lithosphere, and the living environment (biosphere).

These systems are powered by energy that comes from both the Sun and the interior of the Earth. Through processes known as biogeochemical cycles, nutrients and elements also move through these systems along with energy.

Therefore,  Earth activities depend on matter cycling, and for organisms to survive, this planet's surface must cycle with the flow of matter.

To learn more about Earth, refer to the link:

https://brainly.com/question/1204146

#SPJ6

Answer:

0.57 water

Explanation:

To solve this problem, we need to write the reaction expression first.

The reactants are oxygen gas and hydrogen gas.

They react to give a product of water

       2H₂    +    O₂   →   2 H₂O  

Given that;

Number of moles of hydrogen gas = 0.57moles

From the balanced reaction expression;

       2 moles of hydrogen gas produces 2 moles of water

   So;

    0.57mole of hydrogen gas will also produce 0.57 water

Answer:

A. This allows the plants to conserve water and not bloom during the heat of the day

Explanation:

Most desert plants only bloom at night because they take advantage of animals like moths and insects that fly at night for pollination and reproduction.

Because these plants are in the desert and do not get enough water except from short occasional rainfalls, they conserve water and not bloom during the heat of the day. They bloom at night when the temperature is low and this enhances their water conservation and survival.

Answer:

Ideal Gas

The ideal gas is extremely small and the mass is almost zero and no volume Ideal gas is also considered as a point mass.

Real Gas

The molecules of real gas occupy space though they are small particles and also have volume.

anation:

The differences between an ideal gas and a real gas are that the ideal gas follows the gas laws perfectly under all conditions. Whereas a real gas deviates from ideal gas behaviors.

The ideal gas law, also known as the general gas equation, is a fundamental principle in thermodynamics and relates the pressure, volume, temperature, and number of moles of an ideal gas.

An ideal gas is a theoretical gas that follows the gas laws perfectly under all conditions of temperature and pressure. It is assumed to have no volume, no intermolecular forces, and elastic collisions between its particles. An ideal gas also obeys the ideal gas law.

On the other hand, a real gas is a gas that does not follow the gas laws perfectly under all conditions of temperature and pressure. Real gases have volume and intermolecular forces that affect their behavior. These forces cause deviations from ideal gas behavior, especially at high pressures and low temperatures.

In summary, while an ideal gas is a theoretical gas that follows the gas laws perfectly under all conditions, a real gas is a gas that deviates from ideal gas behavior due to its volume, intermolecular forces, and non-elastic collisions between its particles.

Learn more about ideal gas law here:

https://brainly.com/question/33342075

#SPJ2

Answer:

movement of charged particles through the wire .

Explanation:

When electricity is passed through the wire of electromagnet , moving electrons of the wire produces magnetic field . This magnetic field in increased due to high permeability of soft iron of the electromagnet . It is this magnetic field which creates magnetic force .

Answer:

See explanation

Explanation:

The atoms of metals have fewer valence electrons than the atoms of metals and metalloids.

Atoms of metals have only very few valence electrons in their outermost shells hence they donate electrons during bonding. However, atoms of nonmetals have more electrons in their outermost shells and rather accept electrons during bonding. The atoms of metalloids just have a number of valence electrons that are intermediate between those of metals and nonmetals and mostly share electrons in covalent bonds.

Similarly, atoms of metallic elements differ from each other in the number of valence electrons present in the valence shell of the atom of each element. For instance, sodium has one electron in the valence shell of its atom while aluminium has three electrons in the valence shell of its atom.

The atoms of metallic elements are different from the atoms of non metals or metalloids base on the outer electron/ valency electrons and the its bonding pattern.

The atoms of different metals varies in it ability to bond quickly.

The atoms of metallic elements are different from the atoms of non metals or metalloids base on the outer electron/ valency electrons and how it bonds.

Metallic atoms have very few electrons in the outermost shell. The valency electrons of this metallic atoms are few and are easily lost during bonding. They have the ability to release there valency electrons easily. Example of this metals are sodium, potassium , calcium etc.

On the other hand non metallic elements have numerous electron in the outermost shell and easily receive electron during bonding. Example are chlorine, fluorine, oxygen etc.

The metalloid atoms like silicon and germanium have an average number of electron in their outermost shell. They are in between.

The atoms of different metals varies in it ability to bond quickly. For example the group 1 metals are very reactive than the group 2 metals. This simply means the group 1 metals(alkali metals) goes into bonding more easily than the group 2 metals(alkali earth metals).    

read more: https://brainly.com/question/1903992?referrer=searchResults

Answer:

[N₂] = 1.1M

Explanation:

Based on the chemical reaction:

N₂(g) + O₂(g) ⇄ 2 NO(g)

Equilibrium constant, K, is defined as:

K = 5.93 = [NO]² / [N₂] [O₂]

Where [] are equilibrium concentrations of each specie

As initial concentrations are:

N₂ = 0.40mol / 0.500L = 0.8M

NO = 1mol / 0.500L = 2M

The equilbrium concentrations are:

[NO] = 2M - 2X

[N₂] = 0.8M +X

[O₂] = X

Replacing:

5.93 = [2 - 2X]² / [0.8+X] [X]

5.93 = 4 - 8X + 4X² / 0.8X + X²

4.744X + 5.93X² = 4 - 8X + 4X²

1.93X² + 12.744X - 4 = 0

Solving for X:

X = -6.9M → False solution. There are no negative concentrations

X = 0.3M. Real solution.

[N₂] in equilibrium is:

[N₂] = 0.8M +0.3M

[N₂] = 1.1M

Answer:

d. 9.95 × 10⁻³ mol

e. 249 g

f. 2.55 × 10²⁴ atoms

g. 4.32 × 10²² atoms

Explanation:

d. the number of moles of cobalt represented by 5.99 x 10²¹ cobalt atoms

We will use Avogadro's number: there are 6.02 × 10²³ atoms of cobalt in 1 mole of atoms of cobalt.

5.99 x 10²¹ atoms × 1 mol/6.02 × 10²³ atoms = 9.95 × 10⁻³ mol

e. the mass of 4.23 mol of cobalt

The molar mass of cobalt is 58.93 g/mol.

4.23 mol × 58.93 g/mol = 249 g

f. the number of cobalt atoms in 4.23 mol of cobalt

We will use Avogadro's number: there are 6.02 × 10²³ atoms of cobalt in 1 mole of atoms of cobalt.

4.23 mol × 6.02 × 10²³ atoms/1 mol = 2.55 × 10²⁴ atoms

g. the number of cobalt atoms in 4.23 g of cobalt

First, we will calculate the moles of cobalt using the molar mass of cobalt.

4.23 g × 1 mol/58.93 g = 0.0718 mol

Then, we will calculate the number of cobalt atoms using Avogadro's number.

0.0718 mol × 6.02 × 10²³ atoms/1 mol = 4.32 × 10²² atoms

Answer:

I don't get it is it even a question?

Answer: 1.2 x 10^-17 microounces

Explanation:

Ounce = 28.5G microounce = 28.5*10^-6g

3.4*10^-25 kg = 3.4*10^-22 g = (3.4/2.85)*10^(-22+5) = 1.2*10-17

Answer:

hello your question is incomplete attached below is the complete question

answer :

we use Isomerization because conjugated allylic carbocation  is more stable when compared to a Non-conjugated Allylic carbocation

Explanation:

Reason for the mechanism

we use Isomerization because conjugated allylic carbocation  is more stable when compared to a Non-conjugated Allylic carbocation

attached below is the detailed mechanism

Answer:

1.6734 g\ml..hope it helps

Answer: product

Explanation:

Each substance written to the right of the arrow in a chemical equation is referred to as a product.

When writing a chemical equation, the substance that's written to the left of arrow in the equation is the reactants.

On the other hand which is the right side is the product.

Answer:

H-H equation is written as follows:

pH=pK + log

{HCO3-}(base)

{H2CO3}(acid)