Answer: The molecular weight of the dibasic acid is 89.6 g/mol
Explanation:
Normality is defined as the amount of solute expressed in the number of gram equivalents present per liter of solution. The units of normality are eq/L. The formula used to calculate normality:
[tex]\text{Normality}=\frac{\text{Given mass of solute}\times 1000}{\text{Equivalent mass of solute}\times \text{Volume of solution (mL)}}[/tex] ....(1)
We are given:
Normality of solution = [tex]\frac{1}{20}=0.05N[/tex]
Given mass of solute = 0.56 g
Volume of solution = 250 mL
Putting values in equation 1, we get:
[tex]0.05=\frac{0.56\times 1000}{\text{Equivalent mass of solute}\times 250}\\\\\text{Equivalent mass of solute}=\frac{0.56\times 1000}{0.05\times 250}=44.8g/eq[/tex]
Equivalent weight of an acid is calculated by using the equation:
[tex]\text{Equivalent weight}=\frac{\text{Molar mass}}{\text{Basicity}}[/tex] .....(2)
Equivalent weight of acid = 44.8 g/eq
Basicity of an acid = 2 eq/mol
Putting values in equation 2, we get:
[tex]44.8g/eq=\frac{\text{Molar mass}}{2eq/mol}\\\\\text{Molar mass}=(44.8g/eq\times 2eq/mol)=89.6g/mol[/tex]
Hence, the molecular weight of the dibasic acid is 89.6 g/mol
How many moles of sodium carbonate in 18.06x10 to the power 22
Answer:
[tex] moles = \frac{ number \: of \: particles}{6.02 \times {10}^{23} } [/tex]
=1.806×10^22/6.02×10^23
=0.03 moles
hope this helps :)
What is the mass of NaCl required to make 140 grams of a 12% solution of NaCl in water?
12 grams
14 grams
17 grams
18 grams
Answer: The mass of NaCl required to make 140 grams of a 12% solution of NaCl in water is 17 g.
Explanation:
Given: Mass of solution = 140 g
Mass percent = 12%
Formula used to calculate grams of solute are as follows.
[tex]Grams of solute = \frac{grams of solution \times mass percent}{100 percent}[/tex]
Substitute the values into above formula as follows.
[tex]Grams of solute = \frac{grams of solution \times mass percent}{100 percent}\\= \frac{140 g \times 12 percent}{100 percent}\\= 16.8 g\\= 17 g[/tex]
Thus, we can conclude that the mass of NaCl required to make 140 grams of a 12% solution of NaCl in water is 17 g.
Considering the definition of percentage by mass, the correct answer is the third option: 17 grams of NaCl is required to make 140 grams of a 12% solution of NaCl in water.
The Percentage Composition is a measure of the amount of mass that an element occupies in a compound and indicates the percentage by mass of each element that is part of a compound.
This is, the percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.
In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.
The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:
[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]
In this case, you know:
percentage by mass= 12%mass of solute= ?mass of solution= 140 gramsReplacing:
[tex]12=\frac{mass of solute}{140 grams}x100[/tex]
Solving:
mass of solute= [tex]\frac{12 x 140 grams}{100}[/tex]
mass of solute= 16.8 grams ≅ 17 grams
Finally, the correct answer is the third option: 17 grams of NaCl is required to make 140 grams of a 12% solution of NaCl in water.
Learn more about percentage by mass:
brainly.com/question/19168984?referrer=searchResults
brainly.com/question/18646836?referrer=searchResults
brainly.com/question/24201923?referrer=searchResults
brainly.com/question/9779410?referrer=searchResults
brainly.com/question/17030163?referrer=searchResults
The structure shown is an example of what kind of molecule?
A) Ether
B) Alkene
C) Polymer
D) Monomer
Answer:
i think its C polymer hope it helps
The work function of an element is the energy required to remove an electron from the surface of the solid. The work function for palladium is 503.7 kJ/mol (that is, it takes 503.7 kJ of energy to remove 1 mole of electrons from 1 mole of Pd atoms on the surface of Pd metal). What is the maximum wavelength of light that can remove an electron from an atom in palladium metal
Answer:
λ = 2.38 × 10^(-7) m
Explanation:
We are given the work function for palladium as 503.7 kJ/mol.
Now let's convert this to KJ/electron.
We know from avogadro's number that;
1 mole of electron = 6.022 × 10^(23) electrons
Thus,
503.7 kJ/mol = 503.7 × 1/(6.022 × 10^(23)) = 8.364 × 10^(-22) KJ/electron = 8.364 × 10^(-19) J/electron
Formula for energy of a photon is;
E = hv
Where;
h is Planck's constant = 6.626 × 10^(-34) J.s
v is velocity
Now, v = c/λ
Where;
c is speed of light = 3 × 10^(8) m/s
λ is wavelength of light.
Thus;
E = hc/λ
Making λ the subject, we have;
λ = hc/E
λ = (6.626 × 10^(-34) × 3 × 10^(8))/(8.364 × 10^(-19))
λ = 2.38 × 10^(-7) m
Cuál o cuáles de las siguientes características son correctas para la mayoría de los compuestos del carbono?
I) Los compuestos del carbono son solubles en disolventes no polares como el hexano, benceno, éter, etc.
II) Los compuestos del carbono generalmente presentan puntos de fusión y de ebullición bajos
III) La gran mayoría de los compuestos del carbono son combustibles, sean estos, gaseosos, líquidos o sólidos
IV) El enlace covalente es característico de los compuestos del carbono
Todas son correctas
II
I y IV
I, III y IV
Answer:
Todas son correctas
Explanation:
I) Los compuestos del carbono son solubles en disolventes no polares como el hexano, benceno, éter, etc. VERDADERO. La mayoría de los compuestos de carbono son apolares, y basados en la regla: Similar disuelve similar, podemos presumir que la mayoría de compuestos de carbono se disuelven en solventes no polares.
II) Los compuestos del carbono generalmente presentan puntos de fusión y de ebullición bajos. VERDADERO. Al ser sustancias apolares, sus fuerzas electrostáticas son bajas. De la misma manera, como su masa atómica es pequeña, las fuerzas de Van der Waals son despreciables haciendo que sus puntos de fusión y ebullición sean bajos respecto a sustancias de estrucutra similar.
III) La gran mayoría de los compuestos del carbono son combustibles, sean estos, gaseosos, líquidos o sólidos. VERDADERO. Los gases (Como el gas natural) son combustibles usados para cocina. Los líquidos (Como la gasolina) son combustibles y bastante inflamables. Los sólidos (Como la madera) se usan como combustibles para hacer asados o son el combustible en incendios forestales.
IV) El enlace covalente es característico de los compuestos del carbono. VERDADERO. La polaridad del carbono es neutral haciendo que la mayoría de los enlaces que forma sean covalentes.
Todas son correctas
Below are descriptions of different center voids of a solid fuel. Which design
shape will generate the most thrust?
A. A heart
OB. A circle
C. A triangle
O D. A tree with branches
B. A circle.
The center void shape that generates the most thrust in a solid fuel rocket is a circle.
What is Fuel?
Fuel is a substance that is used to produce heat or energy through combustion or other chemical reactions. It can be in the form of a solid, liquid, or gas and is typically used to power engines, generators, or heating systems. Examples of fuels include gasoline, diesel, natural gas, coal, wood, and propane. The choice of fuel depends on factors such as availability, cost, energy content, and environmental impact.
This is because a circular shape allows for the most efficient burning of the fuel, with the flame front moving evenly in all directions. Other shapes, such as a heart, triangle, or tree with branches, can cause uneven burning and may result in less thrust.
Learn more about Fuel from the given link
https://brainly.com/question/10172005
#SPJ1
Answer:
Explanation:
D.
tree with branches
A gas is put into a cosed container.
The container and the gas inside it are heated.
What will happen to the pressure inside the container?
Answer:
When gases in containers are heated, their molecules increase in average speed. This means that they exert a greater force when they collide with the container walls, and also collide with the walls more frequently. The gas is therefore under greater pressure when its temperature is higher.
How many ATOMS of boron are present in 3.61 grams of boron trifluoride ?
Answer:
To determine the number of atoms of Boron that are present within 3.61 grams of Boron Trifluoride, it would be best to convert the grams to moles of the compound and then after that use the Avogadro's number to determine the number of molecules and then use the 1 to 3 ratio to determine the total number of Boron atoms.
Determine the enthalpy for the reaction A+B --> C If we know the following:
A+E --> C+D; delta H = -200 kJ
D+B --> E; delta H = -100 kJ
Explanation:
here is the answer to the question
Put these atoms in order from most negative overall charge to least negative
overall charge.
11 Atom X: 104 protons, 102 electrons
11 Atom B: 24 protons, 18 electrons
1 Atom Q: 15 protons, 16 electrons
11. Atom P: 7 protons, 10 electrons
Answer:
3 Protons, 2 Neutrons, & 3 Electrons. Is the charge of this atom positive, negative, or neutral?
Explanation:
Put these atoms in order from most negative overall charge to least negative
overall charge.
11 Atom X: 104 protons, 102 electrons
11 Atom B: 24 protons, 18 electrons
1 Atom Q: 15 protons, 16 electrons
11. Atom P: 7 protons, 10 electrons
If a gas is pumped from a smaller container to a container that is twice the size, and its pressure is kept the same, then what happens to the temperature of the gas?
Answer: If a gas is pumped from a smaller container to a container that is twice the size, and its pressure is kept the same, then temperature of the gas increases twice.
Explanation:
Charles law states that at constant pressure, the volume of a gas is directly proportional to the temperature.
That is, [tex]V \propto T[/tex].
So, when a gas is pumped from a smaller container to a container that is twice the size shows that volume is increasing by 2 times and its pressure is kept the same.
Therefore,
[tex]2V \propto 2T[/tex]
This means that the temperature of the gas will also become twice its initial temperature.
Thus, we can conclude that if a gas is pumped from a smaller container to a container that is twice the size, and its pressure is kept the same, then temperature of the gas increases twice.
Which best describes a swimming pool?
A.
It is a solute.
• B.
It IS
solvent.
C.
It is solution.
D.
It is a reactant.
•
E.
It is a product.
Answer:
Swimming pool is an example of solution
Explanation:
It has water (solvent) and dissolve ion (solute)
Answer:
it is a solution
Explanation:
the combining of (water and Cl and other pool chemicals) make it a solution.
Suppose that you chose sodium carbonate to precipitate the chromium ions from a solution of chromium (III) chloride. Write and balance the equation of this double-displacement reaction.
If the solution has a volume of 520 mL and the concentration of chromium (III) chloride is 0.224 M, how many grams of sodium carbonate should you add to the solution to precipitate out all the chromium ions?
Answer:
18.5g Na2CO3
Explanation:
Chromium (III) chloride, CrCl3, reacts with Na2CO3 as follows:
2CrCl3 + 3Na2CO3 → Cr2(CO3)3(s) + 6NaCl
Where 2 moles of CrCl3 react with 3 moles of Na2CO3 to produce 1 mole of Cr2(CO3)3 -The precipitate-
To solve this question we need to find the moles of CrCl3 added. With the chemical equation we can find the moles of Na2CO3 and its mass as follows:
Moles CrCl3:
520mL = 0.520L * (0.224mol/L) = 0.116 moles CrCl3
Moles Na2CO3:
0.116 moles CrCl3 * (3 mol Na2CO3 / 2mol CrCl3) = 0.175 moles Na2CO3
Mass Na2CO3 -Molar mass: 105.99g/mol-
0.175 moles Na2CO3 * (105.99g/mol) = 18.5g Na2CO3
For the equilibrium
2H2S(g) ⇋ 2H2(g) + S2(g) Kc = 9 .0X 10-8 at 700°C
the initial concentrations of the three gases are 0.300 M H2S, 0.300 M H2, and 0. 1 50 M S2' Determine the equilibrium concentrations of the gases.
Answer:
Equilibrium concentrations of the gases are
[tex]H_2S=0.596M[/tex]
[tex]H_2=0.004 M[/tex]
[tex]S_2=0.002 M[/tex]
Explanation:
We are given that for the equilibrium
[tex]2H_2S\rightleftharpoons 2H_2(g)+S_2(g)[/tex]
[tex]k_c=9.0\times 10^{-8}[/tex]
Temperature, [tex]T=700^{\circ}C[/tex]
Initial concentration of
[tex]H_2S=0.30M[/tex]
[tex]H_2=0.30 M[/tex]
[tex]S_2=0.150 M[/tex]
We have to find the equilibrium concentration of gases.
After certain time
2x number of moles of reactant reduced and form product
Concentration of
[tex]H_2S=0.30+2x[/tex]
[tex]H_2=0.30-2x[/tex]
[tex]S_2=0.150-x[/tex]
At equilibrium
Equilibrium constant
[tex]K_c=\frac{product}{Reactant}=\frac{[H_2]^2[S_2]}{[H_2S]^2}[/tex]
Substitute the values
[tex]9\times 10^{-8}=\frac{(0.30-2x)^2(0.150-x)}{(0.30+2x)^2}[/tex]
[tex]9\times 10^{-8}=\frac{(0.30-2x)^2(0.150-x)}{(0.30+2x)^2}[/tex]
[tex]9\times 10^{-8}=\frac{(0.30-2x)^2(0.150-x)}{(0.30+2x)^2}[/tex]
By solving we get
[tex]x\approx 0.148[/tex]
Now, equilibrium concentration of gases
[tex]H_2S=0.30+2(0.148)=0.596M[/tex]
[tex]H_2=0.30-2(0.148)=0.004 M[/tex]
[tex]S_2=0.150-0.148=0.002 M[/tex]
Which describes the difference between a claim and a scientific claim?
Claims are based more on truth than scientific claims are.
Anyone can make a claim, but a scientific claim is backed by experimental evidence.
Claims are based on evidence and scientific claims are made by scientists.
Controlled experiments are used in claims, while scientific claims use multiple trials.
Answer:
B. Anyone can make a claim, but a scientific claim is backed by experimental evidence.
<3 Have a nice day!!
Answer:
the awnser is B i got it right
Explanation:
As electrons are passed down the electron transport chain, the molecules are first ______ as they pick up electrons, and then ______ as they release the electrons.
Answer:
reduced; oxidized
Explanation:
An electron transport chain can be defined as a series of redox reactions (electron transporters or proton complexes) that are saddled with the responsibility of transferring electrons from electron donors to electron acceptors through a membrane in order to produce a protein gradient that creates energy or adenosine triphosphate (ATP).
Generally, as these electrons are transferred through the electron transport chain, the molecules are first reduced as they pick up electrons, and then oxidized as they release the electrons.
Cellular respiration can be defined as a series of metabolic reactions that typically occur in cells so as to produce energy in the form of adenosine triphosphate (ATP). During cellular respiration, high energy intermediates are created that can then be oxidized to make adenosine triphosphate (ATP). Therefore, the intermediary products are produced at the glycolysis and citric acid cycle stage.
Additionally, mitochondria provides all the energy required in the cell by transforming energy forms through series of chemical reactions; breaking down of glucose into Adenosine Triphosphate (ATP) used for providing energy for cellular activities in the body of living organisms.
radical example ....
(Please help)
What is the most common isotope for element X
Answer:
Isotope 2
Explanation:
Isotope 2 is the most abundant. Its percent abundance is 78.68% which is the largest percentage, and therefore the most common of the isotopes presented.
Good luck!
why atoms of magnet differ from normal atoms?
Copied answers ❌❌❌
Answer:
The magnetic field of an atom, say H (one electron revolving around a proton) is composed of two separate contributions: an orbital magnetic moment and a spin magnetic moment. We get magnetic moments because of electromagnetic induction associated with each type of electron motion. The electron revolving around the proton with a certain angular momentum is related to the associated orbital magnetic moment (and, yes, we model it as a wire loop with current expressed in terms of the orbital velocity). This can be calculated using elementary mechanics. The spin magnetic moment is a little trickier because it is caused by the intrinsic spin of the electron which is a quantum phenomenon; therefore, this spin magnetic moment can only be calculated using quantum mechanics. In the end, we get a certain net magnetic moment associated with this motion of the electron in an atom. It is important to notice that this atom acts as a magnetic dipole (remember, as of yet, magnetic monopoles don't exist!).
If we take a bulk magnet like you might have on your fridge, it would be composed of atoms. Each atom operates as a magnetic dipole, but due to internal atomic structures, the atoms actually align themselves into separate magnetic domains, each with a net magnetic moment (caused my individually adding up those atomic dipole moments). In a common magnet (ferromagnet), these domains all point the same direction and stay that way, creating a permanent bulk magnetic dipole.
So in a way, there is no difference between the magnetic field of an atom and that of a magnet because one is simply a sum of the other, making both magnetic dipoles. Of course, here we see that there's nothing that fundamental about the magnetic force. In reality, the magnetic force is a relativistic effect caused by the movement of a charged particle, making electricity (i.e. charge) the underlying property at work here. Electromagnetic induction is really a shortcut to understand the magnetic force without worrying about relativistic mechanics. If we were to discover magnetic monopoles (i.e. "magnetic" charge), this would re-write a lot that we know about electromagnetism because we couldn't label all magnetic forces as by-products of moving electric charge
Una muestra de S2 (g) se coloca en un recipiente rígido vacío a 800 K y ésta ejerce una presión inicial de 0,92 atm, luego se combina para formar S8 (g) mediante la reacción: S2 (g) ⇆ S8 (g) Una vez alcanzado el equilibrio, la presión parcial de S2 (g) ha disminuido a 0,18 atm. Calcule Kp para la reacción a esta temperatura
Answer:g
Explanation:
Hi, in some texts number of water molecules released during polymerization is 2n but in others 2n-1 , why?
Answer:
Explanation:
Because you only have one repeat unit, n=1. 2n-1 becomes 2(1)-1 which is equal to one, meaning one molecule of H2O is produced, as is shown by the top condensation polymerisation reaction.
If you had two repeat units, n=2 so 2n-1=3. Three H2O molecules are produced because you would need two molecules of each reactant so three condesation reactions would occur and three molecules of H2O would be released.
According to Le Châtelier's principle, how will an increase in pressure affect a gaseous equilibrium system? O Shift it toward the products O Shift it toward the reactants Shift it toward the side with higher total mole concentration O Shift it toward the side with lower total mole concentration
Answer:
Shift it toward the side with lower total mole concentration
Explanation:
The reaction will shift in a direction that is less affected by stress, so that the pressure is reduced. This means that the reaction will change towards where there is fewer gas molecules (the fewer gas molecules, the smaller the pressure).
Answer:
A. Shift it toward the side with lower total mole concentration
Explanation:
How many grams of ammonia can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm?
Answer: The mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.
Explanation:
Given: Volume = 450 L
Temperature = 450 K
Pressure = 300 atm
The reaction equation is as follows.
[tex]N_{2} + 3H_{2} \rightarrow 2NH_{3}[/tex]
Here, 1 mole of nitrogen reacts to give 2 moles of ammonia.
From the given data, moles of nitrogen are calculated as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into the above formula as follows.
[tex]PV = nRT\\300 atm \times 450 L = n \times 0.0821 L atm/mol K \times 450 K\\n = \frac{300 atm \times 450 L}{0.0821 L atm/mol K \times 450 K}\\= \frac{135000}{36.945}\\= 3654.08 mol[/tex]
For 3654.08 moles of nitrogen, the moles of ammonia produced is as follows.
[tex]2 \times 3654.08 mol\\= 7308.16 mol[/tex]
Therefore, mass of ammonia (molar mass = 17.03 g/mol) is calculated as follows.
[tex]Moles = \frac{mass}{molarmass}\\7308.16 mol = \frac{mass}{17.03 g/mol}\\mass = 124457.96 g[/tex]
Thus, we can conclude that the mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.
Which has more mass, 2 kg of steel or 5 kg of feather.
Answer:
5 kg of feather
Explanation:
PLS HELP ASAPPP!!!
Compare and contrast an electrolytic cell with a voltaic cell. Provide one example where both are present in daily life.
Voltaic cells convert chemical energy to electrical energy by means of an oxidation-reduction reaction while Electrolytic cells convert electrical energy to chemical energy, so they are the opposite of voltaic cells,in an electrolytic cell, the cathode is negatively charged and the anode is positively charged
Answer:
ELECTROLYTIC CELL
An electrochemical cell in which a non-spontaneous chemical reaction takes place when electric current is passed through the solution,is called an electrolytic cell.
EXAMPLE
Nelsons cell and Downs cell
VOLTAIC CELL OR GALVANIC CELL
The electrochemical cell in which a spontaneous chemical reaction takes place and generates electric current is called galvanic and voltaic cell.
EXAMPLE
Daniel cell
Explanation:
How long would it take Jesse, with an acceleration of -2.50 m/s², to bring his bicycle, with an initial velocity of 13.5 m/s, to a complete stop?
Answer:
i am so sorry. i do not have a answer but i am trying to find questioms i can answer
A 20.0 mL solution of NaOH is neutralized with 24.1 mL of 0.200 M HBr. What is the concentration of the original NaOH solution
Answer:
0.241 M
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
HBr + NaOH —> NaBr + H₂O
From the balanced equation above,
The mole ratio of acid, HBr (nₐ) = 1
The mole ratio of base, NaOH (n₆) = 1
Finally, we shall determine the concentration of the NaOH solution. This can be obtained as follow:
Volume of base, NaOH (V₆) = 20 mL
Volume of acid, HBr (Vₐ) = 24.1 mL
Concentration of acid, HBr (Cₐ) = 0.2 M
Concentration of base, NaOH (C₆) =?
CₐVₐ / C₆V₆ = nₐ/n₆
0.2 × 24.1 / C₆ × 20 = 1/1
4.82 / C₆ × 20 = 1
Cross multiply
C₆ × 20 = 4.82
Divide both side by 20
C₆ = 4.82 / 20
C₆ = 0.241 M
Therefore, the concentration of the NaOH solution is 0.241 M
aseous methane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 5.5 g of methane is mixed with 13.9 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
There is 9.6 grams of CO2 produced
Explanation:
Step 1: Data given
Mass of methane = 5.50 grams
Molar mass of methane = 16.04 g/mol
Mass of oxygen = 13.9 grams
Molar mass of oxygen = 32.0 g/mol
Step 2: The reaction
CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)
Step 3: Calculate number of moles
Moles = mass / molar mass
Moles methane = 5.50 grams / 16.04 g/mol
Moles methane = 0.343 moles
Moles oxygen = 13.9 grams / 32.0 g/mol
Moles oxygen = 0.434 moles
For 1 mol CH4 we need 2 moles O2 to produce 1 mol CO2 and 2 moles H2O
O2 is the limiting reactant. It will completely react (0.434 moles).
There will react 0.434/2 = 0.217 moles CH4
There will remain 0.343-0.217 = 0.126 moles CH4
There will be produced 0.434 moles of H2O and
0.434/2 =0.217 moles of CO2
Step 4: Calculate mass of products
Mass = moles * molar mass
Mass CO2 = 0.217 moles ¨44.01 g/mol
Mass CO2 = 9.6 grams
Mass H2O = 0.434 moles * 18.02
Mass H2O = 7.8 grams
every action produces an equal and opposite -- ---------- when one object exterts a force on another object,the second object pushes back with the same amount of---------
someone knows the answer
Balance the equation of. _C + _O2 -- _CO
Explanation:
2C +O2 = 2CO
this will be the answer
