-23.4kj is the standard gibbs free energy associated with the formation of ammonia from nitrogen and hydrogen at 25 c and 500 c
-
The temperature is 25 deg C or 298 K.
ΔGo =−RTlnK=−8.314×298×ln1.3×104 =−23469J=−23.4kJ
Hence, the standard free energy change is -23.4 kJ
Gibbs free energy, thermodynamics The word "free energy" refers to a thermal potential that can be utilized to determine the maximal amount of work that a thermodynamically closed system can perform at constant pressure and temperature. The change in limitless energy that occurs when a chemical is created from its components in their most thermodynamically states under appropriate conditions is referred to as the free basic energy of formation. Ammonia is a colourless gas that has a strong suffocating odour. It easily dissolves in the water, forming an ammonium hypochlorite that can cause discomfort and burns. Under pressure, ammonia gas compresses easily and formation a clear, colourless liquid.
Learn more about standard free energy here:
https://brainly.com/question/6556762
#SPJ4
an atom with an imbalance of electrons to protons is a. a hadron. b. a baryon. c. an ion. d. an isotope. e. none of these
An ion is an atom with an unbalanced ratio of protons to electrons. Atoms or molecules having associated net charges greater than zero are referred to as "ions."
a charged molecule or atom is referred to as an ion. It charges up or down depending on whether one or more electrons are gained or lost. Because of this, it can have a positive or negative charge. Consequently, an ion becomes charged when there is an imbalance between the proportion of positively charged protons to negatively charged electrons. Ions can be categorised into one of two major types. Cations and anions are what they are.A superscript with a plus sign and the number before the plus sign is applied to the chemical formula to represent the symbol for a cation.Anions are represented similarly to cations by the charge number followed by a negative sign.Another subatomic particle with a positive electrical charge is the proton. They are present in the atom's nucleus.
Learn more about ions Refer:brainly.com/question/14982375
#SPJ4
How specifically is kinetic energy lost during a car crash?
Answer + Explanation:
During a car crash, kinetic energy is lost through various forms of deformation of the vehicle and the generation of heat.
When a car collides with another object, the force of the impact causes the vehicle's body and structure to deform. This deformation absorbs some of the kinetic energy and converts it into other forms of energy, such as heat and sound.
In addition, friction between the moving parts of the car and between the car and the road can also generate heat, which absorbs some of the kinetic energy.
The amount of kinetic energy lost during a car crash depends on the mass of the vehicle, the speed at which it was traveling, and the type and severity of the collision. In general, higher speeds and more severe collisions result in greater kinetic energy loss.
What is the correct molecular formula for the compound magnesium chromate pentahydrate?
MgCrO4•5H2O is the answer
The correct molecular formula for the compound magnesium chromate pentahydrate is as follows: MgCrO₄•5H₂O.
What is molecular formula?Molecular formula in chemistry is a notation indicating the number of atoms of each element present in a compound.
Chemical or molecular formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus (+) and minus (−) signs.
The chemical formula also reveals information about the types and number of atoms that make up a chemical compound or molecule.
For example; a chemical compound named magnesium chromate pentahydrate will have a chemical formula of MgCrO₄•5H₂O.
This tells us that the compound contains magnesium, chromium, oxygen, and hydrogen atoms.
Learn more about molecular formula at: https://brainly.com/question/28647690
#SPJ1
the aerobic decomposition of biomass produces significant quantities of methane. question 15 options: true false
The statement given is "False" that The Aerobic decomposition of biomass produces significant quantities of Methane.
What is aerobic decomposition?
The decay or breaking down of organic material in the presence of free or dissolved oxygen (DO).
What does aerobic decomposition produce?
Compost, water (both liquid leachate and gaseous vapor), and volatilized gases are all products of aerobic composting (ammonia, carbon dioxide and, occasionally, gases perceived as odors). Digestate and biogas are created during anaerobic digestion.
Is aerobic decomposition faster than anaerobic?
You can get finished compost sooner if there is enough air available because aerobic decomposers function faster and more effectively than their anaerobic cousins.
The aerobic composting produces water vapor, carbon dioxide and a black organic material.To know more about aerobic decomposition:
https://brainly.com/question/1285919
#SPJ4
which list contains only strong acids? (5 points) a. hcl, hno3, hf, hclo4 b. h2so4, h3po4, hclo4, nh3 c. hno3, h2so4, naoh, h3po4 d. hcl, hno3, h3po4, hclo4 e. hcl, h2so4, hclo4, hi
a. hcl, hno3, hf, hclo4 b. h2so4 list contains only strong acids.
Chloric acid, hydrochloric acid, hydrochloric acid, hydroiodic acid, nitric acid, perchloric acid, and sulfuric acid are the 7 main acids. These are strong acids since they can completely dissociate in water. A strong acid is described as an acetone that completely disintegrates when added to water. Because the hydrochloric acid inside the preceding example donates every one of its protons to the remedy and totally dissolves, it is classified as a strong acid.
learn more about strong acids here:
https://brainly.com/question/16749233
#SPJ4
Predict the products and balance the equation.
NaCl (aq) + KNO₂ (aq) →
Sodium chloride is produced and used in the production of polyester, paper, rubber, glass, chlorine, household bleach, soaps, detergents, and dyes.
Is salt the same as sodium chloride?Chemically speaking, salt is a combination of chloride and sodium. Actually, the element that is most harmful to your health is sodium. (Therefore, the chloride is what gives food its "salty" flavor.).
Why do doctors administer sodium chloride to patients?To replace salt and water that have been lost from your body as a result of specific conditions, sodium chloride 23.4% injection is employed (eg, hyponatremia or low salt syndrome). Additionally, it is added to IV fluids that contain carbohydrates and parenteral nutrition total (TPN).
To know more about sodium chloride visit:
https://brainly.com/question/9811771
#SPJ1
Which type of isomers are o-xylene, m-xylene, and p-xylene?
structural isomers
optical isomers
geometric isomers
o-xylene, m-xylene, and p-xylene are structural isomers.
o-xylene, m-xylene, and p-xylene are examples of aromatic isomers, also known as ortho-, meta-, and para-xylene, respectively. These isomers are classified as aromatic because they are part of a family of compounds known as aromatic hydrocarbons, which contain a ring of six carbon atoms bonded to each other in a specific way.
o-xylene, m-xylene, and p-xylene are also examples of structural isomers. Structural isomers are compounds that have the same molecular formula but differ in the arrangement of their atoms. In the case of o-xylene, m-xylene, and p-xylene, the atoms are arranged differently around the ring of six carbon atoms.
o-xylene, m-xylene, and p-xylene are not optical isomers, which are also known as enantiomers. Optical isomers are compounds that are mirror images of each other but are not superimposable. Optical isomers are important in medicinal chemistry because they can have different biological properties even though they have the same molecular formula and structure.
o-xylene, m-xylene, and p-xylene are also not geometric isomers. Geometric isomers are compounds that have the same molecular formula and the same arrangement of atoms, but differ in the orientation of their atoms or groups of atoms in space. Geometric isomers are often found in compounds with cis-trans double bonds or ring structures.
The characteristics of two different types of reactions are shown below: Reaction A: Electrons are gained by the atoms of an element. Reaction B: Protons are lost by the atom of an element. Which statement is true about the atoms of the elements that participate in the two reactions? a Their identity changes in both Reaction A and Reaction B. b Their identity changes in Reaction A but not in Reaction B. c Their identity changes in Reaction B but not in Reaction A. d Their identity remains the same in both Reaction A and Reaction B.
Answer:
C: B's identity changes, but not A's identity. The identity of an element is solely dependent on the number of protons. For example, 2 protons in an element would be Helium. But if you add or subtract protons you would get a different element like Hydrogen or Lithium. However, such a rule does not apply to electrons; adding or removing electrons would just change the charge of the element, but not the identity.
c is the correct choice
which of the following statements is false regarding the equilibrium constant, kc?13)a)the numerical value of kc depends on the form of the balanced equation.b)kc for a reaction at a particular temperature always has the same value.c)when quoting kc it is customary to omit units.d)kc for the reverse reaction is the negative of kc for the forward reaction
Kc for the reverse reaction is the negative of Kc for the forward reaction is the false statement.
What is equilibrium constant?The equilibrium constant of any chemical reaction is the value of its own reactions quotient at chemicals equilibrium, a State approaches by a dynamically chemicals systems after sufficient times has elapsed at which is in its compositions has no measurable tendency towards furthermore change.
As we know,
Value of Kc for the reverse reaction is always in the from of reciprocal.
Let's take
A<----------------> B,Kc
For reversion reaction we have to take
B<------------------>A,1/Kc
In this equation all the statement are correct.
Thus Kc for the reverse reaction is the negative of Kc for the forward reaction is the correct answer.
To know more about equilibrium constant click-
https://brainly.com/question/19340344
#SPJ4
An apple costs $0.63. One tree produces 418 apples. The orchard has 20 trees. The apple farmer wants to trade the orange farmer 3 oranges for every 2 apples. How many oranges is he able to obtain by trading 0.64 of his orchard?
The apple farmer is able to obtain 8,034.6 oranges by trading 0.64 of his orchard.
How to determine how many oranges he is able to obtain by trading 0.64 of his orchard?
A word problem is a mathematical exercise where significant background information on the problem is presented in ordinary language rather than in mathematical notation
First, let's find the total number of apples produced by the orchard:
20 trees × 418 apples/tree = 8,360 apples
Now, let's find the number of apples that the apple farmer is able to trade: 8,360 apples × 0.64 = 5,350.4 apples
Since the apple farmer wants to trade 3 oranges for every 2 apples, he will be able to obtain:
3 oranges / 2 apples × 5,350.4 apples = 8,025.6 oranges.
Therefore, the apple farmer is able to obtain 8,025.6 oranges by trading 0.64 of his orchard.
Learn more about word problems on:
brainly.com/question/1781657
#SPJ1
Choose the exothermic reaction that is used to ignite the Mg + Oxygen reaction (step 2) that eventually lights the thermite.
2 H2 + O2 ----> 2 H2O
2 Na + O2 ----> Na2O
CH4 + 2 O2 ----> 2 H2O + CO2
2 C4H10 + 13 O2 ----> 8 CO2 + 5 H2O
The reaction that can light the thermite is the combination of methane and oxygen. Option C
What is an ignition reaction?There is an ignition reaction when we burn a substance in another substance. Now, we know that an exothermic reaction refers to the kind of reaction hat is able to produce heat.
Since the exothermic reaction can be able to produce heat, this is the reaction that we can use to light the reaction between the magnesium and the oxygen so that we can be able to light the thermite.
Learn more about ignition reaction:https://brainly.com/question/2649564
#SPJ1
what is the nuclear binding energy per mole if the mass defect of a certain isotope is 0.1172 u per atom or 0.1172 g per mol? express your answer in joules. remember to use self-consistent units.
4.447 x10^13 J is the nuclear binding energy per mole if the mass defect of a certain isotope is 0.1172 u per atom or 0.1172 g per mol? express your answer in joules.
BE = dleta mc^2.
Given that, delta m = mass defect = 0.4941 g per mol = 0.4941/1000 kg/mol c = 3x10^8 m/s
BE = ( 0.4941/1000) x (3x10^8)^2= 4.4469 x10^13
= 4.447 x10^13 J
Nuclear binding energy is energy required to completely separate an atomic nucleus in with its constituting protons and neutrons, or the energy freed by combining protons and neutrons into a single nucleus. Isotopes are atoms that have the same number of protons but number of protons. They have nearly identical chemical composition but differ in volume and thus in physicochemical parameters.
Learn more about Nuclear binding energy here:
https://brainly.com/question/2923968
#SPJ4
classify each of the following characteristics as related to fusion, fission, or both
Used in nuclear
power plants
Byproducts have
long half-lives
Needs very high
temperatures
Releases lots
of energy
Occurs on the sun
Fission only
Fusion only
Fission and fusion
Nuclear Fission include used in nuclear power plants and byproducts have long half-lives, Nuclear fusion includes occurs on the sun and needs very high temperatures, while Nuclear fission and Nuclear fusion includes release lots of energy.
What are Nuclear fission nuclear and Nuclear fusion?Nuclear fission is a physico chemical process caused when an atom divides into two smaller atoms, which released important amounts of energy and it is used to generate electricity in nuclear power plants.
Conversely, Nuclear fusion occurs when smaller atoms such as hydrogen fuse to form larger atoms, which is able to generate much more energy when compares to Nuclear fusion, and this process fuel energy in the sun.
Therefore, with this data, we can see that fission nuclear and fusion nuclear are very different processes in terms of the division of fusion of atoms and they release differential amounts of energy.
Learn more about Nuclear fission here:
https://brainly.com/question/3992688
#SPJ1
333
Identifying States of Matter
Use the drop-down menus to complete the statements.
✓have a definite shape and volume.
do not have a definite volume or shape.
have a definite volume, but the shape may change.
States of matter:
Solids: have a definite shape and volume.
Gases: do not have a definite volume or shape.
Liquids: have a definite volume, but the shape may change.
What is states of matter?
States of matter refer to the physical behavior of matter based on its temperature and pressure. There are three main states of matter: solid, liquid, and gas.
There are also several other states of matter, such as plasma and Bose-Einstein condensate, that are observed under certain conditions, such as extremely high temperatures or pressures.
According to the problem:
Solids are characterized by their ability to maintain a fixed shape and volume. They are typically solid at room temperature and have a high degree of structural rigidity.
Gases, on the other hand, do not have a definite shape or volume. They are characterized by their ability to expand and fill any container they are placed in. Gases are typically in a gaseous state at room temperature and are highly compressible.
Liquids are intermediate between solids and gases. They have a definite volume, but the shape may change to conform to the shape of their container. Liquids are typically liquid at room temperature and are less compressible than gases, but more compressible than solids.
To know more about states of matter, visit:
https://brainly.com/question/29069107
#SPJ1
nickel has a face-centered cubic (fcc) structure and has a density of 8.90 g/cm3. what is its atomic radius?
The nickel has a face-centered cubic (fcc) structure and has a density of 8.90 g/cm3. its atomic radius is 1.36 × 10⁻⁸ cm.
given that :
density = 8.90 g/ cm³
the density is given as :
density = mass / volume
no. of atoms = 8 (1/8) + 6(1/2)
volume = (r × 8 (1/8))³
mass = 4 atoms × mol / 6.022 × 10²³ atoms × 58.68 g /mol
density = mass / volume
8.90 g/ cm³ = (4 atoms × mol / 6.022 × 10²³ atoms × 58.68 g /mol ) / (r × 8 (1/8))³
r = 1.36 × 10⁻⁸ cm
Thus, the atomic radius is 1.36 × 10⁻⁸ cm.
To learn more about atomic radius here
https://brainly.com/question/2795197
#SPJ4
Plastic beads used in jewelry making are made of long molecules usually consisting of carbon, hydrogen, and oxygen. Compare the bonding in these molecules to the bonding in gems.
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, gems have ionic bonding and plastic beads have covalent bonding.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond. Gems have ionic bonds formed between metals and nonmetals. Plastic beads, will have covalent bonds because it is easily deformed.
Therefore, gems have ionic bonding and plastic beads have covalent bonding.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ1
according to the building-up principle or aufbau principle, which subshell is typically filled next after the 6s subshell?
Aufbau's principle states that an electron in an atom is filled according to the energy of orbitals, orbital with minimum energy is first filled, and so on.
so the order of filling of electrons in orbitals are 1s 2s 2p 3s 3p 4s 3d 4p 5s 4d 5p 6s 4f 5d 6p 7s 5f 6d 7p 8s.
so, the 4f subshell is filled after the complete filling of electrons in 6s.
know more about "Aufbau's principle" here:
brainly.com/question/15006708
please answer the following
Answer: Kinetic Energy
Explanation:
Gravitational potential energy of each drop converts to kinetic energy when water drops into a reservoir.
F. According to the rules for naming compounds that you learned in this course, what is the
chemical name of this new product? What is its common name? (2 points)
Molecular compounds are termed by using the stem of the first element's name plus the suffix -ide, followed by the second element. Numerical prefixes are used to specify the number of atoms in a molecule.
What does "chemical common name" mean?The IUPAC defines a common name as one that clearly identifies a chemical but does not adhere to the current systematic naming convention. Acetone, which bears the scientific term, serves as an illustration of a common name. 2-propanone
What is the short answer to chemical?A chemical is any substance whose composition is known. A chemical always consists of the same "substance," to put it another way. Water is one of the substances found in nature.
To know more about Molecular compounds visit:-
https://brainly.com/question/20920787
#SPJ1
a brittle white crystalline solid has a melting point of 760 c and reacts when added to water. this substance is most likely what type of solid
A brittle white crystalline solid reacts with when added to water is Quartz. It is a metamorphic solid.
Quartz is the most abundant silica mineral. Pure Quartz is colorless and transparent. It occurs in most igneous and practically all metamorphic and sedimentary rocks. It is used as a component of numerous industrial materials. Silicon (Si) has the atomic number 14 and is closely related to carbon. It is a relatively inert metalloid. Silicon is often used for microchips, glass, cement, and pottery. Silica is the most abundant mineral found in the crust of the earth. One of the most common uses of silica quarts is the manufacturer of glass. Quartz is the second most abundant mineral in the Earth's crust. Its chemical name is SiO2.
To learn more about Quartz please visit:
https://brainly.com/question/19451647
#SPJ4
which halogen forms the weakest bond to carbon? rev: 12 08 2020 qc cs-243801 multiple choice f cl br i
The halogen forms the weakest bond to carbon is Iodine due to vary size difference between iodine and a carbon
Iodine is a chemical element with the symbol I and atomic number 53. It is a halogen, which means it is a highly reactive, nonmetal element that occurs in the periodic table among the highly reactive nonmetals. Iodine is a blue-black, lustrous solid that sublimates (turns from a solid directly into a gas) at standard temperature and pressure. It has a melting point of 386.85 degrees Fahrenheit (193.65 degrees Celsius) and a boiling point of 575.1 degrees Fahrenheit (302.9 degrees Celsius). Iodine is an essential trace element in the human body. It plays a vital role in the production of thyroid hormones, which are important for normal growth and development. The thyroid gland, located in the neck, absorbs iodine from the blood and uses it to produce thyroid hormones. Iodine deficiency can lead to goiter, a condition characterized by an enlarged thyroid gland.
To know more about Iodine visit : https://brainly.com/question/20535640
#SPJ4
Draw the Lewis structure for SF6 and then answer the following questions that follow.
-Do not include overall ion charges or formal charges in your drawing.
Questions:
1). What is the electron-pair geometry for S in SF6?
2). What is the shape (molecular geometry) of SF6?
SF6 molecular geometry will be octahedral because if we look at the structure sulphur hexafluoride has a central sulphur atom around which12 electrons or 6 electron pairs are present and there are no lone pairs.
What is SF6?Sulphur hexafluoride – also known as SF6 – is a ‘greenhouse gas’ that has long played a part in global warming, similar to that of carbon dioxide (CO2).CO2 has been a focal point of climate change for many years. Released from the burning of fossil fuels and other carbon-intensive practices, it creates a cover that traps heat from the sun in the earth’s atmosphere, warming the planet and the oceans. This is what’s known as the ‘greenhouse effect’.SF6 also has this effect, but is much more potent than CO2. Today, wider understanding of the potency of this gas – and the need to reach net zero carbon emissions by 2050 in order to tackle climate change – is causing a rethink of its use.To learn more about ‘greenhouse effect’ refer to:
https://brainly.com/question/19521661
#SPJ4
if we use a to represent the cations (in blue) and x to represent the anions (in green), what is the empirical formula of this ionic compound?
The empirical formula for the compound if A denotes the cations and X denotes the anions is AX₂
It is given that the cations are denoted by Blue color and the anions with green color. There are 8 atoms in the corners and 6 in the face center. Then,
No of atoms in a total of all corners = 8 x 1/8
No of atoms in the corners = 1
No of atoms in the faces = 6 x 1/2
No of atoms in the faces = 3
Then,
Total no of cations atoms = total number of atoms in the corners + the total number of atoms in the faces
Total number of cations (A) = 1 + 3
Total number of cations (A) = 4
The total number of anions in the cell is 8 from the figures as they aren't shared with another lattice arrangement. Therefore,
Number of anions (X) = 8
Then the empirical formula would be A₄X₈ which could be written in the simplified form of AX₂.
Thus, the empirical formula is AX₂ for the arrangement.
To know more about the arrangement of atoms in solids, click here:
https://brainly.com/question/18924454
#SPJ4
when aqueous solutions of iron(iii) sulfate and potassium phosphate are combined, solid iron(iii) phosphate and a solution of potassium sulfate are formed. the net ionic equation for this reaction is:
The solubility laws that regulate ionic chemicals in an aqueous solution are the main focus of double replacement reactions. The insoluble iron(III) phosphate, FePO4, precipitates out of the solution when these two solutions are combined because the iron(III) cations and phosphate anions combine to make it.
FeBr3(aq)+K3PO4(aq)→FePO4(s)⏐↓+3KBr(aq)
Ionic equations are chemical formulas in which the electrolytes in aqueous solution are stated as dissociated ions, in contrast to molecular equations, which express compounds as molecules. The ionic species are typically followed by (aq) in the equation to denote that they are in an aqueous solution, and the substance in question is typically a salt that has been dissolved in water.
To know more about solubility, click the below link
https://brainly.com/question/28170449
#SPJ4
Organisms typically have more than one form of each gene. If one form can mask the appearance of another form, that form is considered _______ the other form.
A.
better than
B.
dominant over
C.
recessive to
D.
worse than
If one form of a gene can mask the appearance of another form, that form is considered dominant over the other form. Option B.
What are dominant alleles?According to Mendel, genes are usually made up of 2 alleles. These alleles can be the same or different. When the alleles are the same, the gene is said to be homozygous. If the alleles are different, the gene is said to be heterozygous.
When the two alleles that make up a gene are different, one will be dominant and the other will be recessive. The dominant gene masks the effect of the recessive gene. In other words, the recessive gene cannot be expressed as long as it coexists with the dominant gene. In order for it to be expressed, it has to be in two copies or a homozygous recessive form.
For the dominant allele, however, only one copy is needed for it to be expressed.
In summary, if one form of a gene can mask the appearance of another form, that form is considered dominant over the other form.
More on genes can be found here: https://brainly.com/question/5519888
#SPJ1
when 2.16g of h2 reacts with excess o2 by the following equation, 258kj of heat are released. what is the change of enthalpy associated with the reaction of 1.00mol of hydrogen gas?
when 2.16g of h2 reacts with excess o2 by the following equation, 258kj of heat are released. the change of enthalpy associated with the reaction of 1.00mol of hydrogen gas is -241 KJ
Molar mass of H2 = 2.016 g/mol,mass(H2)= 2.16 g
use:number of mol of H2,n = mass of H2/molar mass of H2=(2.16 g)/(2.016 g/mol) = 1.071 mol
For 1.071 mol of H2, heat released = 258 KJ So,
for 1 mol, heat released = 258/1.071 KJ = 241 KJ
Since this is heat released, sign will be negative
Answer: -241 KJ. The amount of energy progressed or subsumed in a reaction at constant pressure is referred to as enthalpy change. It is represented by the symbol ΔH, read as "delta H". It should be noted that the term "enthalpy change" only pertains to reactions performed at constant pressure. As a result, if a reaction emits more electricity than it absorbs, the reaction is exothermic, and the enthalpy is negative. Consider this as a quantity of heat departing (or being deducted from) the reaction.
Learn more about enthalpy change here:
https://brainly.com/question/21102695
#SPJ4
(d) Caesium is another element in Group 1 of the Periodic Table.
(i) The table below lists some statements about the reaction of caesium with
cold water compared to the reaction of lithium with cold water.
Place ticks (✓) in the boxes to show the two correct statements.
the reaction with caesium is more vigorous
the reaction with caesium produces a different gas
the reaction with caesium produces an acidic solution
the reaction with caesium produces a different compound
the reaction of caesium is endothermic
Answer: The reaction with caesium is more vigourus.
The reaction with caesium produces different compund.
Explanation:
Cold water and cesium react to produce hydrogen gas and a mixture of cesium and hydroxide ions as byproducts.
what should be added to a separatory funnel in order to partition an acidic organic compound into the aqueous layer? group of answer choices
NaCl or NH4Cl should be added to a separatory funnel in order to partition an acidic organic compound into aqeous layer.
What is aqeous layer?If it is difficult to tracking where the water droplets go, also keeping track of the volumes of the layers: whichever layer increased with the additional of water is the aqeous layer.
The aqeous phases is water-based and can be an acidic, basic, neutral, or a saturated salt solutions. The organic phase is an organics solvent, usually diethyl ether or dichlorophenoline, which has minimalist solubility in water. For instance, ethanol would be a poor extractions solvent because it forms a solution within water.
One methods is to add NaCl or NH4Cl should to the separatory funnels, which dissolved in the aqueous layer and Decreased the ability of organics compounds to dissolve in water ("salting out").
To know more about aqeous layer click-
https://brainly.com/question/14567984
#SPJ4
One of the wavelengths of light emitted by hydrogen atoms is 6.56 x 10–7 m. Calculate the frequency.
The frequency of the light emitted by hydrogen is equal to 4.57 Hz.
What are frequency and wavelength?The frequency of the wave can be defined as the number of oscillations of a wave per second. The frequency has S.I. units of s⁻¹ or Hertz.
The wavelength can be described as the distance between two adjacent crests on a wave.
The relation between frequency, wavelength, and speed of light (c) can be shown as:
c = νλ
Given, the wavelength of the light emitted by H-atom, ν = 6.56 × 10⁻⁷ m
The speed of light, [tex]c =3 \times 10^8\; m/s[/tex]
The frequency of the light emitted by hydrogen atoms can determine from the above-mentioned relationship:
ν= c/λ = 3 ×10⁸/6.56 × 10⁻⁷ = 4.57 Hz
Therefore, the frequency of the emitted light is equal to 4.57 Hz.
Learn more about wavelength and frequency, here:
brainly.com/question/18651058
#SPJ1
is a chemist has 1.87 moles of na2o and causes it to decompose into its constitiuent elemtns how many moles of na will form
3.74 moles of Na will be produced after the decomposition of Na₂O.
The decomposition reaction of Na2 is as follows:
2Na₂o → 4Na + o₂
Given, moles of Na₂o = 1.87
From stoichiometric coefficient 2 in Na₂o, after decomposition we get coefficient as 4 of Na. That means the yield of Na is double the reactant.
Hence, the moles of Na after decomposition= 2 x 1.87 = 3.74 moles
Learn more about Stoichiometry:
brainly.com/question/9743981
# SPJ4
