Answer:
go for it
Explanation:
Answer:
I would be happy to help
Explanation:
please help me :)
( check the photo! )
Answer:
plastic rays i think the matetial that can widely recycle
The volume of a gas is 550 mL at 960 mm Hg and 200.0 C. What volume
would the pressure of the gas be 830 mm Hg if the temperature is reduced
to 150.0C? Make sure your answer is rounded to nearest whole number
and your final answer has the units of mL. *
Answer:
The volume will be 568.89 mL.
Explanation:
Boyle's law says that "The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure"
Boyle's law is expressed mathematically as:
Pressure * Volume = constant
or P * V = k
Gay-Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. That is, the pressure of the gas is directly proportional to its temperature. Gay-Lussac's law can be expressed mathematically as follows:
[tex]\frac{P}{T}=k[/tex]
Where P = pressure, T = temperature, K = Constant
Finally, Charles's law indicates that as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:
[tex]\frac{V}{T}=k[/tex]
Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:
[tex]\frac{P*V}{T} =k[/tex]
Studying an initial state 1 and a final state 2, it is fulfilled:
[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]
In this case:
P1= 960 mmHgV1= 550 mLT1= 200 C= 473 K (being 0 C=273 K)P2= 830 mmHgV2= ?T2= 150 C= 423 KReplacing:
[tex]\frac{960 mmHg*550 mL}{473K} =\frac{830 mmHg*V2}{423 K}[/tex]
Solving:
[tex]V2=\frac{423 K}{830 mmHg} *\frac{960 mmHg*550 mL}{473K}[/tex]
V2= 568.9 mL
The volume will be 568.89 mL.
Construct an explanation for why the physical properties of the inner core, outer core, and lower mantle are essential for the development of Earth's magnetic field.
Answer:
The hot temperature of inner core and outer core is responsible for the production of magnetic field.
Explanation:
The physical properties of the inner core, outer core, and lower mantle are essential for the development of Earth's magnetic field because the very high temperature of inner core is responsible for the formation of magnetic field. If the inner core is not very hot so the magnetic field will not be generated and our earth's atmosphere will not be save from the solar wind. It can be blown away by the solar wind if this magnetic field is not present so we can conclude that the physical properties of inner core and outer core is important for the production of magnetic field.
Identify the type of reaction occurring based on the description
below:
"Sodium hydroxide reacts with iron (III) chloride."
What type of reaction is this?
a Double displacement
b
Decomposition
C Synthesis
d Combustion Reaction
Answer:double displacement
Explanation:I just did it
What gas in the air is used by plants to make their own food? (2 points)
Nitrogen
Water vapor
Carbon dioxide
Oxygen
Answer:
Carbon Dioxide
Explanation:
Carbon dioxide gets turned into oxygen
3. Move the slider on the burette to the top to add about 25 mL of NaOH to the flask. What
happens, and what does this tell you about the pH of the flask?
Page Break
LED
Answer:
When you move the burette slider to the top of a flask and add about 25 mL of NaOH to the flask, you will cause a concentration of OH- molecules. This will make the solution become a basic solution and make the litmus paper blue.
Explanation:
After reading your question, we can see that you are carrying out a test to discover the nature of the pH of a solution. This type of test uses litmus paper, which is an indicator of the presence of acids and bases, being able to determine the pH of a solution. This paper is soaked in organic ink and when placed in an acidic solution, it is red in color. However, when placed in a basic solution it has a blue color.
An acidic solution is one that has a high concentration of H+ atoms and has the ability to donate electrons. The basic solution, on the other hand, has a high concentration of OH- and has the capacity to receive electrons.
When you move the burette slider to the top of a flask and add about 25 mL of NaOH to the flask, you will cause a concentration of OH- molecules. This will make the solution become a basic solution and make the litmus paper blue, that is, the solution has the basic pH.
An unknown amount of sodium azide (NaN3) reacts and produces 0.033 moles of nitrogen gas. What mass of sodium metal is produced
Answer:
Mass of sodium metal is 130.87 gram
Explanation:
The complete reaction is
2 NaN3 --> 2 Na + 3 N2
We know that PV = nRT
n = [tex]\frac{PV}{RT}[/tex]
On substituting the given values, we get
[tex]n = \frac{\frac{99707}{101325}*75 }{0.082 *(273.15 +15)} \\n = 3.02[/tex]moles of N2
Sodium azide's molar mass
3.02 *(2/3) = 2.013 moles
Mass = 2.03 * 65.01 = 130.87 gram
Please help me find the answer , thank you.
Answer:
the answeer is definitely silicon.
Which statement best explains why ice cubes will melt in a glass of tea?
The tea becomes saturated.
The ice cubes gain energy.
The tea’s freezing point increases.
The ice cube’s melting point decreases.
Answer:
The ice cubes gain energy
Explanation:
The ice cubes are gaining energy from the water's carbon dioxide, or H2O. They then melt because they cannot hold that energy.
A student prepares four different aqueous NaCl solutions according to the table. Which solution will have the highest molarity?
Answer:
what did you end up guessing
Explanation:
what are the factors that affect the rate of chemical reaction?
Answer:
surface area of a solid reactant.
concentration or pressure of a reactant.
temperature.
nature of the reactants.
presence/absence of a catalyst.
PLZ HELP!
Where have you seen or known of examples of waves in YOUR LIFE? Based on science terms of a wave.
Answer:
QUESTION:
Where have you seen or known of examples of waves in YOUR LIFE? Based on science terms of a wave.
ANSWER:
I've seen the following in my life:
~ Lightwaves
~ Heatwaves
~ Electromagnetic waves
~ X-rays
~ Tsunami Waves
Explanation:
Hope that this helps you out! :)
If you have any questions please put them in the comment section below this answer.
Have a great rest of your day/night!
Please thank me on my profile if this answer has helped you.
How many moles of C6H12O6 does 8.2 x 1023 molecules represent
Answer:
i.e. mass of 1 mole of glucose, C6H12O6 = (6 × 12.01 + 12 × 1.01 + 6 × 16.00) g = 180.18 g (using atomic weight data to 2 decimals) 1 mole of carbon atoms weighs 12.01 g and there are 6 moles of C atoms in 1 mole of glucose, so the mass of carbon in 1 mole of glucose = 6 × 12.01 g = 72.06 g.
The specific heat of nickel is 0.445 J/g degree Celsius. How much heat is required to heat a 168 gram piece of nickel from 15.2 degrees Celsius to 43.6 degrees Celsius?
An eraser is an example of —
Group of answer choices
an insulator
a closed circuit
a conductor
an open circuit
Answer:
Insulator
Explanation:
An eraser can't conduct electricity, which makes it an insulator.
A cough sytup contains 0.5M dextromethophan. How many moles of the cough supressant are in 21.3mL of the cough syrup?
Answer:
0.0107 mol
Explanation:
Multiply concentration by volume (in liters) to get moles.
0.5 M • 0.0213 L = 0.0107 mol
Please help me out this is a test.
The imaje shows a plate baundary. Arrows have been added to indicate the movement if the plates.
The weight of the elephant is 4500 kg, and the area of the sole of one of its legs is 1700 cm2. Calculate the pressure of the elephant on the ground.
Answer:
64852.94 N/m²
Explanation:
From the question,
P = F/A.................... Equation 1
Where P = Pressure of the Elephant on the ground, F = Weight of the Elephant, A = Area of the sole of the four legs.
But,
F = mg.............. Equation 2
Where m = mass of the elephant, g = acceleration due to gravity
Substitute equation 2 into equation 1
P = mg/A............ Equation 3
Given: m = 4500 kg, A = (1700×4) cm² ( The elephant has four legs) = 6800 cm² = 0.68 m²
Constant; g = 9.8 m/s²
Substitute these values into equation 3
P = (4500×9.8)/0.68
P = 64852.94 N/m²
What is the heat capacity of a substance in which 1050 grams will rise in temperature from 30.4°C to 25.7°C when it absorbs 2880 joules of heat?
Answer:
0.584 J/g°C
Explanation:
Using the formula as follows;
Q = m × c × ∆T
Where;
Q = amount of heat (joules)
m = mass of substance (g)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C)
According to the information in this question;
mass of substance (m) = 1050g
Initial temperature = 25.7°C
Final temperature = 30.4°C
amount of heat (Q) = 2880J
change in temperature (∆T) = (30.4°C - 25.7°C) = 4.7°C
Using Q = m.c.∆T
c = Q ÷ m∆T
c = 2880 ÷ (1050 × 4.7)
c = 2880 ÷ 4935
c = 0.584 J/g°C
The specific capacity of the substance is 0.584 J/g°C.
A covalent bond is formed when two atoms reach a stable state that balances:
MARK TWO RESPONSES
A
the repulsion between the nucleus protons of one atom to the electrons of the other atom
B
the attraction between the nucleus of one atom to the electrons of the other atom
C
the attraction between the two nuclei of the atoms, which both contain protons
D
the repulsion between the two nuclei of the atoms, which both contain protons
Answer:
B and I think A but you may want a secon opinion on that
Explanation:
I know that electrons are shared with covalent bonds so I assume the 2 answers are the ones with electrons it them
Zr + O ⇒
B + O ⇒
Zn + C ⇒
Co + I ⇒
Mg + Br ⇒
WHAT- WHAT GRADE R YOU IN 0,0
What is the name
of the reigning
theory about the
origins of the
universe?
Answer:
please follow me
Explanation:
eyye6ww6yeyosuyoyo6owy
When do recessive traits show in an offspring?
Answer:
Only individuals with an aa genotype will express a recessive trait; therefore, offspring must receive one recessive allele from each parent to exhibit a recessive trait. One example of a recessive inherited trait is a smooth chin, as opposed to a dominant cleft chin.
Explanation:
If 34.2 g of NaOH are dissolved in water to make a 750 mL solution, what is the molarity of the solution?
Answer:
1.14 M
Explanation:
First divide the mass of NaOH by the molar mass of NaOH. Then divide by the volume to get molarity.
34.2 g / 39.997 g/mol = 0.855 mol NaOH
0.855 mol NaOH / 0.750 L = 1.14 M NaOH
I need help with science: Which picture best shows a loud, low-pitched sound?
Image A shows a loud and low-pitched sound.
What is the frequency?
The term frequency refers to the number of waves that pass a fixed point in unit time.
High pitched sound is of higher frequency because they make the air molecules vibrate much faster than low-pitched sound. Due to their high frequency, their wavelength is shorter (Remember wavelength and frequency are inversely proportional). Vice versa is true to the low-pitched sound. They vibrate air molecules slower than high-pitched sound. Their wavelength is longer and frequency smaller.
Hence, option A is the correct answer.
Learn more about frequency here:
https://brainly.com/question/3280221
#SPJ2
PLZ HELP! QUESTION IS BELOW! :D
Answer:
Explanation:
When we say anything is a wave, what exactly do we mean? The most intuitive and straightforward wave to envision is a water wave. A motion, more specifically, is a disturbance that propagates or travels away from its source. Water waves are caused by a disruption in the water's surface, such as a rock tossed into a pond or a swimmer splashing the surface continuously. The noise for sound waves is a rise of air pressure, which may be caused by the oscillating cone within a speaker. There are many kinds of disturbances in earthquakes, including surface disturbances and pressure disturbances under the surface. Even radio signals are best deciphered by using a comparison of sea waves Water waves are helpful to visualize since they are more than just a mental picture. The amplitude, period, frequency, and energy of water waves are all the same as they are for all waves. A small set of underlying principles can be used to describe all wave characteristics.
(hope this helps can i plz have brainlist :D hehe)
An unknown amount of Al203 decomposed producing 215 g of solid aluminum. 2Al2O3=4Al+3O2 How many grams of oxygen gas should be produced
Answer:
191.11 grams of oxygen gas should be produced.
Explanation:
The balanced reaction is:
2 Al₂O₃ → 4 Al + 3 O₂
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Al₂O₃: 2 molesAl: 4 molesO₂: 3 molesBeing the molar mass of each compound:
Al₂O₃: 102 g/moleAl: 27 g/moleO₂: 32 g/moleBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
Al₂O₃: 2 moles* 102 g/mole= 204 gramsAl: 4 moles* 27 g/mole= 108 gramsO₂: 3 moles* 32 g/mole= 96 gramsThen you can apply the following rule of three: if by stoichiometry 108 grams of aluminum are produced along with 96 grams of oxygen, 215 grams of aluminum are produced along with how much mass of oxygen?
[tex]mass of oxygen=\frac{215 grams of aluminum*96 grams of oxygen}{108grams of aluminum}[/tex]
mass of oxygen= 191.11 grams
191.11 grams of oxygen gas should be produced.
can i get a snap i could send a link to, to do a few chem 1 assignments i could award more points
Answer:The FitnessGram PACER Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The test is used to measure a student's aerobic capacity as part of the FitnessGram assessment. Students run back and forth as many times as they can, each lap signaled by a beep sound.
Explanation:
Which of the following are also compounds? Select all that apply.
A.
CuFeS2
B.
H2O
C.
KCl
D.
Mg
E.
Cl
Answer:
option B,C and A are compound
A sample of a gas in a balloon has a volume of 4.20 L and temperature of 48.2 °C. Calculate the volume when
the temperature is lowered to 15.4°C at constant pressure.
a. 3.77
b. 4.20
c. 1.34
d. 13.15
e. 4.68
Answer:
V1/T1=V2/T2
4.20L/321.2K=x/288.4K
multiply both side by 288.4
1211.28/321.2=x
x=3.77L
Option 3 13.15 is the correct answer.
What is Charles law?Charles's law exists as an experimental gas law that explains how gases tend to expand when heated. A modern statement of Charles's law exists: When the pressure on a sample of a dry gas exists held constant, the Kelvin temperature and the volume will be in direct proportion.
According to Charles law
The volume occupied by a fixed amount of gas is directly proportional to its absolute temperature, if the pressure remains constant.
[tex]V1/T1=V2/T2[/tex]
Where,
[tex]V1[/tex]= first volume
[tex]V{2}[/tex] = second volume
[tex]T{1}[/tex] = first temperature
[tex]T{2}[/tex]= second temperature
Here, at constant pressure,
[tex]V1/T1=V2/T2[/tex]
[tex]V1[/tex]=4.20 L
[tex]V2[/tex]= x
[tex]T1[/tex]=321.2 K
[tex]T2[/tex]=288.4 K
Therefore, [tex]V1/T1=V2/T2[/tex]
4.20L/321.2K=x/288.4K
1211.28/321.2=x
x=3.77L
Thus option a is correct.
To learn more about Charles law refer to:
https://brainly.com/question/16927784
#SPJ2
