Can some one help me with this plumbing question. Even just a guess.
Plz no shady links

Answer:

Option B

Explanation:

Catalytic convertor with in the exhaust pipes of any vehicle converts harmful gases (such as hydrocarbons (HC), carbon monoxide (CO) and nitrogen oxides (NOx)) produced by combustion of fossil fuels (petrol, diesel etc.) into less harmful/toxic pollutants by acting as a catalyst for redox reaction. A catalytic convertor releases some mild gases from the exhaust like less harmful CO2, nitrogen and water vapour (steam)

Hence, option B is correct

Answer:

PERT Chart and GANTT Chart

As the project manager of a residential construction project, I will prefer the PERT chart to the GANTT chart because a PERT chart displays task dependencies unlike a Gantt chart.  With the PERT chart, the sequence of tasks is clearly mapped out.  Dependent tasks are carried out when other tasks that they depend on have been executed.

Explanation:

By definition, a Gantt chart is like a bar chart that lays out project tasks and timelines using bars.  On the other hand, a PERT chart follows a structure in the form of flow charts or network diagrams.  It displays all the project tasks in separate boxes.  The boxes are then connected with arrows which clearly show the task dependencies.

Answer:

The appropriate answer is "0.0043".

Explanation:

The given values is:

Error probability,

p = 0.01

Received digits,

n = 10

and,

[tex]x\sim Binomial[/tex]

As we know,

⇒  [tex]P(x)=\binom{n}{x}p^xq^{n-x}[/tex]

Now,

⇒  [tex]P(x >1) =1- \left \{ P(x=0)+P(x=1) \right \}[/tex]

⇒                 [tex]=1-\left \{\binom{10}{0}(0.01)^0(0.99)^{10-0}+\binom{10}{0}(0.01)^1(0.99)^{10-1} \right \}[/tex]

⇒                 [tex]=1-0.9957[/tex]

⇒                 [tex]=0.0043[/tex]

Answer:

Explanation:

Given that:

diameter = 100 mm

initial temperature = 500 ° C

Conventional coefficient = 500 W/m^2 K

length  = 1 m

We obtain the following data from the tables A-1;

For the stainless steel of the rod [tex]\overline T = 548 \ K[/tex]

[tex]\rho = 7900 \ kg/m^3[/tex]

[tex]K = 19.0 \ W/mk \\ \\ C_p = 545 \ J/kg.K[/tex]

[tex]\alpha = 4.40 \times 10^{-6} \ m^2/s \\ \\ B_i = \dfrac{h(\rho/4)}{K} \\ \\ =0.657[/tex]

Here, we can't apply the lumped capacitance method, since Bi > 0.1

[tex]\theta_o = \dfrac{T_o-T_{\infty}}{T_i -T_\infty}} \\ \\ \theta_o = \dfrac{50-30}{500 -30}} \\ \\ \theta_o = 0.0426\\[/tex]

[tex]0.0426 = c_1 \ exp (- E^2_1 F_o_)\\ \\ \\ 0.0426 = 1.1382 \ exp (-10.9287)^2 \ f_o \\ \\ = f_o = \dfrac{In(0.0374)}{0.863} \\ \\ f_o = 3.81[/tex]

[tex]t_f = \dfrac{f_o r^2}{\alpha} \\ \\ t_f = \dfrac{3.81 \times (0.05)^2}{4.40 \times 10^{-6}} \\ \\ t_f= 2162.5 \\ \\ t_f = 36 mins[/tex]

However, on a single rod, the energy extracted is:

[tex]\theta = pcv (T_i - T_{\infty} )(1 - \dfrac{2 \theta}{c} J_1 (\zeta) ) \\ \\ = 7900 \\times 546 \times 0.007854 \times (500 -300) (1 - \dfrac{2 \times 0.0426}{1.3643}) \\ \\ \theta = 1.54 \times 10^7 \ J[/tex]

Hence, for centerline temperature at 50 °C;

The surface temperature is:

[tex]T(r_o,t) = T_{\infty} +(T_1 -T_{\infty}) \theta_o \ J_o(\zeta_1) \\ \\ = 30 + (500-30) \times 0.0426 \times 0.5386 \\ \\ \mathbf{T(r_o,t) = 41.69 ^0 \ C}[/tex]

Answer:

In the absence of dark energy, a flat universe expands forever but at a continually decelerating rate, with expansion asymptotically approaching zero; with dark energy, the expansion rate of the universe initially slows down, due to the effects of gravity, but eventually increases, and the ultimate fate of the universe ...

Explanation:

I think it goes on forever.

Answer:

The temperature after a long time will return to 15°C

Explanation:

Determine the temperature of the slab after a very long time

First we calculate the heat flow for m^2 area normal to the surface

= q / A = 650°c - 15°C / ( 1 / h  + L / K )

           = 635°c  / ( 1 / 220 + 0.1 / 110 )  = 116.416 kw/m^2

Total heat content in the slab is calculated as

= m* c * ΔT

= 8530 * A * 0.1 * 380 * ( 650 - 15 )

= 205828.9  kJ/m^2

The temperature will return to 15°C after a long time

Answer: its c

Explanation:

Answer:

the highest rate of heat transfer allowed is 0.9306 kW

Explanation:

Given the data in the question;

Volume = 4L = 0.004 m³

V[tex]_f[/tex] = V[tex]_g[/tex] = 0.002 m³

Using Table ( saturated water - pressure table);

at pressure p = 175 kPa;

v[tex]_f[/tex] = 0.001057 m³/kg

v[tex]_g[/tex] = 1.0037 m³/kg

u[tex]_f[/tex] = 486.82 kJ/kg

u[tex]_g[/tex] 2524.5 kJ/kg

h[tex]_g[/tex] = 2700.2 kJ/kg

So the initial mass of the water;

m₁ = V[tex]_f[/tex]/v[tex]_f[/tex] + V[tex]_g[/tex]/v[tex]_g[/tex]

we substitute

m₁ = 0.002/0.001057  + 0.002/1.0037

m₁ = 1.89414 kg

Now, the final mass will be;

m₂ = V/v[tex]_g[/tex]

m₂ = 0.004 / 1.0037

m₂ = 0.003985 kg

Now, mass leaving the pressure cooker is;

m[tex]_{out[/tex] = m₁ - m₂

m[tex]_{out[/tex] = 1.89414  - 0.003985

m[tex]_{out[/tex] = 1.890155 kg

so, Initial internal energy will be;

U₁ = m[tex]_f[/tex]u[tex]_f[/tex] + m[tex]_g[/tex]u[tex]_g[/tex]

U₁ = (V[tex]_f[/tex]/v[tex]_f[/tex])u[tex]_f[/tex]  + (V[tex]_g[/tex]/v[tex]_g[/tex])u[tex]_g[/tex]

we substitute

U₁ = (0.002/0.001057)(486.82)  + (0.002/1.0037)(2524.5)

U₁ = 921.135288 + 5.030387

U₁ = 926.165675 kJ

Now, using Energy balance;

E[tex]_{in[/tex] -  E[tex]_{out[/tex] = ΔE[tex]_{sys[/tex]

QΔt - m[tex]_{out[/tex]h[tex]_{out[/tex] = m₂u₂ - U₁

QΔt - m[tex]_{out[/tex]h[tex]_g[/tex] = m₂u[tex]_g[/tex] - U₁

given that time = 75 min = 75 × 60s = 4500 sec

so we substitute

Q(4500) - ( 1.890155 × 2700.2 ) = ( 0.003985 × 2524.5 ) - 926.165675

Q(4500) - 5103.7965 = 10.06013 - 926.165675

Q(4500) = 10.06013 - 926.165675 + 5103.7965

Q(4500) = 4187.690955

Q = 4187.690955 / 4500

Q = 0.9306 kW

Therefore, the highest rate of heat transfer allowed is 0.9306 kW

probably in it's chromosomes

the picture is blank for me what does it say i can comment the answer plz mark brainlyist

Answer:

mass flow rate = 0.0534 kg/sec

velocity at exit = 29.34 m/sec

Explanation:

From the information given:

Inlet:

Temperature [tex]T_1 = -16^0\ C[/tex]

Quality [tex]x_1 = 0.2[/tex]

Outlet:

Temperature [tex]T_2 = -16^0 C[/tex]

Quality  [tex]x_2 = 1[/tex]

The following data were obtained at saturation properties of R134a at the temperature of -16° C

[tex]v_f= 0.7428 \times 10^{-3} \ m^3/kg \\ \\ v_g = 0.1247 \ m^3 /kg[/tex]

[tex]v_1 = v_f + x_1 ( vg - ( v_f)) \\ \\ v_1 = 0.7428 \times 10^{-3} + 0.2 (0.1247 -(0.7428 \times 10^{-3})) \\ \\ v_1 = 0.0255 \ m^3/kg \\ \\ \\ v_2 = v_g = 0.1247 \ m^3/kg[/tex]

[tex]m = \rho_1A_1v_1 = \rho_2A_2v_2 \\ \\ m = \dfrac{1}{0.0255} \times \dfrac{\pi}{4}\times (1.7 \times 10^{-2})^2\times 6 \\ \\ \mathbf{m = 0.0534 \ kg/sec}[/tex]

[tex]\rho_1A_1v_1 = \rho_2A_2v_2 \\ \\ A_1 =A_2 \\ \\ \rho_1v_1 = \rho_2v_2 \\ \\ \implies \dfrac{1}{0.0255} \times6 = \dfrac{1}{0.1247}\times (v_2)\\ \\ \\\mathbf{\\ v_2 = 29.34 \ m/sec}[/tex]

Answer:

hi = 7026.8  W/m^2.k

Explanation:

Given data :

pressure of saturated steam = 1.2 bar

Horizontal steel pipe : inside diameter = 0.620 , outside diameter = 0.750 inches

temperature of water at entry = 60°F

temperature of water at exit = 75°F

velocity of water = 6 ft/s

Calculate the Inside convective heat transfer coefficient ( hi )

mean temperature ( Tm ) = 60 + 75 / 2 = 67.5°F ≈ 292.877 K ≈ 19.727°C

next : find the properties of water at this temperature ( 19.727°C )

thermal conductivity = 0.598  w/m.k

density = 1000 kg/m^3

specific heat ( Cp ) = 4.18 KJ/kg.k

viscosity = 0.001 pa.s

velocity of water = 6 ft/s ≈ 1.8288 m/s

∴ Re ( Reynolds number ) = 28712.16

and Prandtl number ( Pr ) = (4180 * 0.001) / 0.598  = 6.989

finally to determine the inside convective heat transfer coefficient we will apply the Dittos - Bolter equation

hi = 7026.8 w/m^2.k

attached below is the remaining solution

Answer:

newspaper, radio, televison

Explanation:

had avid in 7th :)

Answer:

1. will help for colcollares.

2. gives you money for studies

3. helps you choose the perfect collage

Answer:

Which option identifies the step of the implementation phase represented in the following scenario?

A company in the gaming industry decides to integrate movement controls in its newest hardware release. It sends an online survey to interactive gamers to identify their highest priorities.

establishing a process and budget

using communication tools

building and assembling a team

setting up a change order process

Explanation:

#carryonml

Answer:

using communication tools

Explanation:

The correct answer is using communication tools. Communication tools such as online surveys help project teams identify customers’ wants and needs.

Answer:

15x

Explanation:

Answer:

[tex]\mathbf{G_m = 2.25}[/tex]

Explanation:

From the given information:

Let the weight of the mix in the air be = [tex]W_{ma}[/tex]

Let the weight of the mix in water be = [tex]W_{mw}[/tex]; &

the bulk specific gravity be = [tex]G_m[/tex]

SO;

[tex]W_{mw} = W_{ma} - v \delta _{w} --- (1)[/tex]

Also;

[tex]G_m = \dfrac{W_{mw}}{v \delta_w} --- (2)[/tex]

From (2), make[tex]v \delta_w[/tex] the subject:

[tex]v \delta_w = \dfrac{W_{ma}}{G_m}[/tex]

Now, equation (1) can be rewritten as:

[tex]W_{mw} = W_{ma} - \dfrac{W_{ma}}{G_m}[/tex]

[tex]G_m = \dfrac{W_{ma}}{W_{ma} - W_{mw}}[/tex]

Replacing the values;

[tex]G_m = \dfrac{1173.5}{1173.5 -652.5}[/tex]

[tex]G_m = \dfrac{1173.5}{521}[/tex]

[tex]\mathbf{G_m = 2.25}[/tex]

Answer

a) 62 percent

b) 40 percent

Explanation:

Original diameter ( d[tex]_{i}[/tex] ) = 10.33 mm

Original Gauge length ( L[tex]_{i}[/tex] ) = 52.8 mm

diameter at point of fracture ( d[tex]_{f}[/tex] ) = 6.38 mm

New gauge length ( L[tex]_{f}[/tex] ) = 73.9 mm

Calculate ductility in terms of

a) percent reduction in area

percentage reduction = [ (A[tex]_{i}[/tex] - A[tex]_{f}[/tex] ) / A[tex]_{i}[/tex] ] * 100

A[tex]_{i}[/tex] ( initial area ) = π /4 di^2

= π /4 * ( 10.33 )^2 = 83.81 mm^2

A[tex]_{f}[/tex] ( final area ) = π /4 df^2

= π /4 ( 6.38)^2 = 31.97 mm^2

hence : %reduction = ( 83.81 - 31.97 ) / 83.81

= 0.62 = 62 percent

b ) percent elongation

percentage elongation = ( L[tex]_{f}[/tex] - L[tex]_{i}[/tex] ) / L[tex]_{i}[/tex]

= ( 73.9 - 52.8 ) / 52.8 = 0.40 = 40 percent

This question is incomplete, the missing image in uploaded along this answer below.

Answer:

The required stress is 200 Mpa

Explanation:

Given the data in the question;

diameter D = 12 mm = 12 × 10⁻³ m

Length L = 188 mm = 188 × 10⁻³ m

Poisson's ratio v = 0.34

Reduction in diameter Δd = 0.0105 mm = 0.0105 × 10⁻³ m

The transverse strain will;

εˣ = Δd / D

εˣ = -0.0105 × 10⁻³ /  12 × 10⁻³ m

εˣ = -0.00088

The longitudinal strain will be;

[tex]E^z[/tex] = - ( εˣ  / v )

[tex]E^z[/tex] = - ( -0.00088  / 0.34 )

[tex]E^z[/tex] = - ( - 0.002588 )

[tex]E^z[/tex] = 0.0026

Now, Using the values for strain, we get the value of stress from the graph provided in the question, ( first image uploaded below.

From the graph, in the Second image;

The stress is 200 Mpa

Therefore, The required stress is 200 Mpa

Answer: Diagram associated with your question is attached below

5) B

6) C

Explanation:

5) The pin support at A allows ; Rotation about its central axis  

This is because pin supports does not allow the translation of its structural member in any direction i.e. y or x but only rotation about its axis

6)  The support at B does not allow displacement in y direction

This is because roller support allows displacement only in the direction that they are situated and in this case it is the x - direction

Answer: its c

Explanation:

Answer: barries

Explanation:

Answer: i got you its d

Explanation:had the smae question as you

Answer:

true

Explanation:

the answer is true because if u don't have a valid license when operating a vehicle and you get pulled over you will get in trouble i know this because my parents got in trouble for it once

Answer:

Option B

Explanation:

An evaporator along with  cold low pressure refrigerant absorbs heat from the air within the passenger compartment thereby supplying cool air for the occupants.

Hence, option B is correct

Answer:

The issues related to the privacy are:

1. Informational privacy

2. Discrimination factors

3. Biased grouping on the basis of Data mining

4. Lack of consent

5. Morally wrong

6. Illegal distribution of information risks

7. Possibility of threat to life

Let's look at some major concerns:

1. Informational privacy : The concept of privacy of the personal information is totally nullified when the information is being used for a purpose other than the intended one for which it was given. This unethical use of information even for general purposes is not correct and is a matter of concern. It is more like using the sensitive data of others for personal benefit which is purely objectionable and raises security issues. Sometimes the data is also shared with the potential employers which might have certain impacts we are unaware of.

2. Data mining issues : The process of using a certain information to arrive and understand the trend and outcomes is called data mining. In this case, the consumer's data undergoes grouping and might get placed in the wrong group rather than the actual one. Also, there can be a case of biasing towards the groups which are not be focused on, or are not a part of the intended audience. This leads to the discrimination factors if we see it from a social point of view.

3. Lack of consent : Use of information without the consent or awareness of the consumers raises concern over the business ethics followed by the company. No one deserves the right to misuse information for his personal benefits without any of its information to the consumer. It is morally wrong and againt the work ethics. Moreover, it raises trust issues between the two involved, and hence is socially unacceptable.Explanation:

Answer:

No,  it is not a periodic Signal

Explanation:

No,  it is not a periodic Signal

This signal is repeating itself with the fixed on and off values but the major point to note here is that is this signal repeating after a fixed length of time every time. No, such information is provided in the question and hence, this signal cannot be termed as periodic.

Answer:

CAD and a database

Explanation:

The correct answer is CAD and a database. When American Motors Corportation introduced the Jeep Cherokee, it implemented CAD to increase engineering productivity and combined that with a new communications system.

Answer: Both technicians A and B

Explanation:

I took the pf test

Answer:

E

Explanation:

I have a big brain and I just took the test and got it correct.