Answers
Answer:
Distance is 300 and displacement is 100
Explanation:
Distance= 100+100+100=300
Displacement=100
plz mark me as brainliest.
Related Questions
mdjxjxjcjfkfjjdksklqlakzjxjxkkskakMmznxkxkdkd?
Answers
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
I hope this helped!+*
red light from a He-Ne laser is at 590.5 nm in the air. it is fired at an angle of 31.0 to horizontal at a flat transparent crystal of calcite (n= 1.34 ar this frequency) .find the wavelength and frequency of the light inside the crystal and the angle from horizontal that it travels inside the calcite crystal.
Answers
Answer:
7374.4
Explanation:
I took the test
(filler so I can post)
Question 2 of 20 :
Select the best answer for the question.
2. Which of the following is considered to be a vector?
A. Velocity
B. Time
C. Temperature
D. Mass
Mark for review (Will be highlighted on the review page)
Answers
The answer is A. velocity .
Velocity is a vector quantity because it need magnitude as well as direction to be defined.
Can someone take there time and answer this :)
Answers
Answer: I think B.)
Explanation:
g An airplane is flying through a thundercloud at a height of 1500 m. (This is a very dangerous thing to do because of updrafts, turbulence, and the possibility of electric discharge.) If a charge concentration of 25.0 C is above the plane at a height of 3000 m within the cloud and a charge concentration of -40.0 C is at height 850 m, what is the electric field at the aircraft
Answers
Answer:
[tex]523269.9\ \text{N/m}[/tex]
Explanation:
q = Charge
r = Distance
[tex]q_1=25\ \text{C}[/tex]
[tex]r_1=3000\ \text{m}[/tex]
[tex]q_2=40\ \text{C}[/tex]
[tex]r_2=850\ \text{m}[/tex]
The electric field is given by
[tex]E=E_1+E_1\\\Rightarrow E=k(\dfrac{q_1}{r_1^2}+\dfrac{q_2}{r_2^2})\\\Rightarrow E=9\times 10^9\times (\dfrac{25}{3000^2}+\dfrac{40}{850^2})\\\Rightarrow E=523269.9\ \text{N/m}[/tex]
The electric field at the aircraft is [tex]523269.9\ \text{N/m}[/tex]
A geologist notices that a river is eroding its valley at a constant rate. Knowing the height of the valley walls, how could the geologist figure out when the river started carving the valley?
A.
Count growth rings of trees growing on the valley floor.
B.
Divide the height of the valley walls by the rate of erosion.
C.
Fill up the river valley with rocks, and time how long it takes the rocks to wash out.
D.
Sit and observe the river for a few hours until the valley walls double in height.
Answers
Answer:
B.
Divide the height of the valley walls by the rate of erosion.
Explanation:
There is a relationship between the rate of erosion and the hieght at which it is eroded according to Newton's law of motion. In the case of the scenario above, the best way to determine the time the river started carving the valley would be the division of the height of the valley walls by the rate of erosion.
Which statement best explains why objects are pulled toward Earth’s center?
Answers
Answer:
Earth has a much greater mass than objects on its surface
Application question: In Lancaster county, Pennsylvania, it is common for members of the Amish community to use windmills to pump water from underground to fill a tank for drinking water. The wind causes the turbine blades to spin, rotating a shaft, which is transferred through some gears to operate a pump, which pumps water up from deep below the ground to fill an above ground tank. Identify the energy conversions happening at each step below.
Wind blows______causing the turbine to turn, rotating shaft works pump_____energy.
Motion of water moving up from well______energy.
Water in tank which is positioned 5 feet above the ground level______potential energy.
Answers
Answer:
Wind blows__wind energy ____causing the turbine to turn, rotating shaft works pump__mechanical___energy.
Motion of water moving up from well___kinetic energy___energy.
Water in tank which is positioned 5 feet above the ground level______potential energy
Explanation:
Wind has in it wind energy which is then used to rotate the turbine shaft which is a form of mechanical work and hence possess mechanical energy
Moving water posses kinetic energy and when this water is kept at some height it possess potential energy
You and a friend are playing with a Coke can that you froze so it's solid to demonstrate some ideas of Rotational Physics. First, though, you want to calculate the Rotational Kinetic Energy of the can as it rolls down a sidewalk without slipping. This means it has both linear kinetic energy and rotational kinetic energy. [The freezing only matters because if there is liquid inside, the calculation for the Moment of inertia becomes more complicated]. A Coke can can be modeled as a solid cylinder rotating about its axis through the center of the cylinder. This can has a mass of 0.33 kg and a radius of 3.20 cm. You'll need to look up the equation for the Moment of Inertia in your textbook. It is rotating with a linear velocity of 6.00 meters / second in the counter-clockwise (or positive) direction. You can use this to determine the angular velocity of the can (since it is rolling without slipping). What is the Total Kinetic Energy of the Coke can
Answers
Answer:
K_{total} = 8.91 J
Explanation:
In this exercise you are asked to find the kinetic energy of the can of coca-cola
K_total = K_ {Translation} + K_ {rotation}
the translational kinetic energy is
K_ {translation} = ½ m v²
the kinetic energy of rotation is
K_ {rotation} = ½ I w²
The moment of inertia of a cylinder is
I = ½ m r²
we substitute
K_ {total} = ½ m v² + ½ (½ m r²) w²
angular and linear velocity are related
v = w r
we substitute
K_ {total} = ½ m v² + ¼ m r² v² / r²
K_ {total} = m v² (½ + ¼)
K_ {total} = ¾ m v²
let's calculate
K_ {total} = ¾ 0.33 6.00²
K_{total} = 8.91 J
an object is moving at 60m/s and has a mass of 5 kg what is its momentum
Answers
Answer:
300
Explanation:
the momentum is 300
p=mv
p=5×60
5×60 =300
A doorknob is a type of wheel and axle. In a doorknob, the door handle acts as the wheel. The handle is connected to a cylinder, called a spindle, which acts as the axle. When the handle turns, the spindle turns in the same direction. The spindle is located inside the handle and pulls the latch back and forth, allowing the door to open.
In the doorknob shown above, when the handle is rotated a distance of 84 millimeters, the spindle is rotated a distance of 14 millimeters. What is the mechanical advantage of this doorknob?
A. 504
B. 6
C. 84
D. 14
Answers
How much work will a 500 watt motor do in 10 seconds?
Answers
Answer:
50j
Explanation:
Watts are units used to measure power. power can be defined as rate of energy transfer
500 watts means - 500 J of energy per second
in 1 second - 500 J of work is done
therefore within 10 seconds - 500 J/s x 10 s = 5000 J
work of 5000 J is carried out in 10 seconds
Answer:
Watts are units used to measure power. power can be defined as rate of energy transfer
500 watts means - 500 J of energy per second
in 1 second - 500 J of work is done
therefore within 10 seconds - 500 J/s x 10 s = 5000 J
work of 5000 J is carried out in 10 seconds
Explanation:
An object changes velocity from 100m/s
to 76m/s in 6 seconds. If it has a mass of
20kg, what is the net force?
Answers
Answer:
1-1=0
Explanation:
ahriqqwertyuioo
Scientists are constantly exploring the universe, looking for new planets that support life similar to the life on
Earth. A new planet that supports life would have all of the following characteristics except -
A. a gaseous atmosphere.
B. an orbiting moon.
C. liquid water.
D. protection from radiation.
Answers
A new planet that supports life would have all the following characteristics except an orbiting moon. Hence, option B is correct.
What is a Planet?An enormous, spherical celestial object known as a planet is neither a star nor its remains. The nebular hypothesis, which states how an interstellar cloud falls out of a nebula to produce a young protostar encircled by a protoplanetary disk, is now the best explanation for planet formation.
By gradually accumulating material under the influence of gravity, or accretion, planets develop in this disk.
The rocky planets Mercury, Venus, Earth, and Mars, as well as the giant planets Jupiter, Saturn, Uranus, and Neptune, make up the Solar System's minimum number of eight planets. These planets all revolve around axes that are inclined relative to their respective polar axes.
To know more about Planet:
https://brainly.com/question/14581221
#SPJ2
Swordfish are capable of stunning output power for short bursts. A 650 kg swordfish has a cross-sectional area of 0.92 m2 and a drag coefficient of 0.0091- very low due to some evolutionary adaptations. Such a fish can sustain a speed of 30 m/s for a few seconds. Assume seawater has a density of 1026 kg/m3. a) How much power does the fish need to put out for motion at this high speed
Answers
Answer:
the required or need power is 115960.57 Watts
Explanation:
First of all, we take down the data we can find from the question, to make it easier when substituting values into formulas.
mass of swordfish m = 650 kg
Cross - sectional Area A = 0.92 m²
drag coefficient C[tex]_D[/tex] = 0.0091
speed v = 30 m/s
density p = 1026 kg/m³
Now, we determine our Drag force F[tex]_D[/tex]
Drag force F[tex]_D[/tex] = [tex]\frac{1}{2}[/tex] × C[tex]_D[/tex] × A × p × v²
Next, we substitute the values we have taken down, into the formula.
Drag force F[tex]_D[/tex] = [tex]\frac{1}{2}[/tex] × 0.0091 × 0.92 × 1026 × (30)²
Drag force F[tex]_D[/tex] = 4.294836 × 900
Drag force F[tex]_D[/tex] = 3865.3524
Now, we determine the power needed P[tex]_w[/tex]
P[tex]_w[/tex] = F[tex]_D[/tex] × v
we substitute
P[tex]_w[/tex] = 3865.3524 × 30
P[tex]_w[/tex] = 115960.57 Watts
Therefore, the required or need power is 115960.57 Watts
What is the magnitude of the gravitational force acting on a
1.0 kg object which is 1.0 m from another 1.0 kg object?
Answers
Ans[tex]^{}[/tex]wer and expl[tex]^{}[/tex]anation is in a fi[tex]^{}[/tex]le. Li[tex]^{}[/tex]nk below! Go[tex]^{}[/tex]od luck!
bit.[tex]^{}[/tex]ly/3a8Nt8n
The unit of work done is called derived unit why
Answers
If the acceleration of the body is towards the center, what is the direction of the unbalanced force ? Using a complete sentence , describe the direction of the net force that causes the body to travel in a circle at a constant speed.
Answers
Accelerating objects are changing their velocity. Velocity is often thought of as an object's speed with a direction. Thus, objects which are accelerating are either changing their speed or changing their direction. They are either speeding up, slowing down or changing directions. Changing the velocity in any one of these three ways would be an example of an accelerated motion.
Carbon-14 is the typical radioisotope used to date materials; however, it has a limitation to 40,000 years. A scientist who wants to date materials older than 40,000 years would most likely use which radioisotope?
Answers
Answer:
the decay of uranium ending in lead, of potassium (40K) that becomes argon, the decay of rubidium
Explanation:
For the radioactive dating process, a material is needed that has a known average life time and that we can know the amount of material at a given moment,
In the case of carbon 14 (14C), living beings stop capturing it from the air and plants when they die, so knowing the amount they currently have, it is possible to calculate the time in which they stopped absorbing, but the life time average is 5730 years, the maximum time that can be used is up to about 10 average visa times
To analyze extra samples have high half-life times
* the decay of uranium ending in lead
* the decay of potassium (40K) that becomes argon T1 / 2 = 1,251 10⁹ years
* the decay of rubidium (87Ru) which becomes strontium T1 / 2 = 4.92 10¹⁰ years
What happens when Earth rotates on its axis and how long does it take
Answers
Answer:
You get Day and Night
It takes 24 hour
Answer:
Explanation:
The Earth's orbit makes a circle around the sun. At the same time the Earth orbits around the sun, it also spins.Since the Earth orbits the sun and rotates on its axis at the same time we experience seasons, day and night, and changing shadows throughout the day.It only takes 23 hours, 56 minutes and 4.0916 seconds for the Earth to turn once on its axis.
An ideal horizontal spring-mass system has a mass of 1.0 kg and a spring with constant 78 N/m. It oscillates with a period of 0.71 seconds. When this same spring-mass system oscillates vertically instead, the period is _______ seconds. Enter 2 significant figures (a total of three digits) and use g = 10.0 m/s2 if necessary.
Answers
Answer:
T = 0.71 seconds
Explanation:
Given data:
mass m = 1Kg, spring constant K = 78 N/m, time period of oscillation T = 0.71 seconds.
We have to calculate time period when this same spring-mass system oscillates vertically.
As we know
[tex]T = 2\pi \sqrt{\frac{m}{K} }[/tex]
This relation of time period is true under every orientation of the spring-mass system, whether horizontal, vertical, angled or inclined. Therefore, time period of the same spring-mass system oscillating vertically too remains the same.
Therefore, T = 0.71 seconds
A ball is attached to one end of a wire, the other end being fastened to the ceiling. The wire is held horizontal, and the ball is released from rest. It swings downward and strikes a block initially at rest on a horizontal frictionless surface. Air resistance is negligible, and the collision is elastic. The masses of the ball and block are, respectively, 1.48 kg and 2.77 kg, and the length of the wire is 1.11 m. Find the velocity of the ball just after the collision.
Answers
Answer: Velocity of the ball just after the collision is -1.414 m/s.
Explanation:
As energy is conserved in a reaction so here, energy before collision will be equal to the energy after collision.
[tex]E_{before} = mgh = E_{after} = \frac{1}{2}mv_{o}^{2}[/tex]
where,
m = mass
g = gravitational energy = [tex]9.8 m/s^{2}[/tex]
h = height or length
[tex]v_{o}[/tex] = initial velocity
Also here, height is the length of wire. Let the height be denoted by 'L'. Therefore,
[tex]\frac{1}{2}mv_{o}^{2} = mgL\\v_{o}^{2} = 2gL\\v_{o} = \sqrt{2gL}\\= \sqrt{2 \times 9.8 m/s^{2} \times 1.11 m}\\= 4.66 m/s[/tex]
Formula used to calculate velocity after the collision is as follows.
[tex]v_{f ball} = v_{o} [\frac{m_{ball} - m_{block}}{m_{ball} + m_{block}}][/tex]
where,
[tex]v_{f ball}[/tex] = final velocity of ball after collision
[tex]m_{ball}[/tex] = masses of ball
[tex]m_{block}[/tex] = masses of block
Substitute the values into above formula as follows.
[tex]v_{f ball} = v_{o} [\frac{m_{ball} - m_{block}}{m_{ball} + m_{block}}]\\= 4.66 m/s [\frac{1.48 kg - 2.77 kg}{1.48 kg + 2.77 kg}]\\= 4.66 m/s \times (-0.303)\\= -1.414 m/s[/tex]
Thus, we can conclude that velocity of the ball just after the collision is -1.414 m/s.
whem completing an emergency Roaside stop,it is necessary to put on your parking brake
A. True
B. False
Answers
Answer:
trueeeeeeee..........mmmm...........
In a physics lab experiment for the determination of moment of inertia, a team weighs an object and finds a mass of 4.07 kg. They then hang the object on a pivot located 0.155 m from the object's center of mass and set it swinging at a small amplitude. As two of the team members carefully count 113 cycles of oscillation, the third member measures a duration of 247 s. What is the moment of inertia of the object with respect to its center of mass about an axis parallel to the pivot axis
Answers
Answer:
I = 0.65 kgm²
Explanation:
Since the mass is an inertial pendulum, we use the formula for the period, T of an inertial pendulum.
T = 2π√(I/mgh) where I = moment of inertia of object about pivot point, m = mass of object5 = 4.07 kg, g = acceleration due to gravity = 9.8 m/s² and h = distance of center of mass of object from pivot point = 0.155 m.
Given that the team measures 113 cycles of oscillation in 247 s, the period, T = time of oscillations/total number of oscillations = 247 s/113 oscillations = 2.186 s/oscillation
So, T = 2.186 s
We now find I by making it subject of the formula in the equation for T.
So,
T = 2π√(I/mgh)
dividing both sides by 2π, we have
T/2π = √(I/mgh)
squaring both sides, we have
(T/2π)² = [√(I/mgh)]²
T²/4π² = I/mgh
multiplying both sides by mgh, we have
T²mgh/4π² = I
I = T²mgh/4π²
substituting the values of the variables into the equation, we have
I = T²mgh/4π²
I = (2.186 s)² × 4.07 kg × 9.8 m/s² × 0.155 m/4π²
I = 4.778 s² × 4.07 kg × 9.8 m/s² × 0.155 m/4π²
I = 29.539 kgm²/4π²
I = 0.748 kgm²
Now I = I' + mh² (parallel axis theorem) where I' = moment of inertia of object about its center of mass, m = mass of object = 4.07 kg and h = distance of center of mass object from pivot point.
So, I' = I - mh²
Substituting the values of the variables into the equation, we have
I' = I - mh²
I' = 0.748 kgm² - 4.07 kg × (0.155 m)²
I' = 0.748 kgm² - 4.07 kg × 0.02403 m²
I' = 0.748 kgm² - 0.098 kgm²
I = 0.65 kgm²
The universe cooled after the Big Bang.At some point hydrogen atoms combined to form helium.What is this process called?
Answers
Answer:
Nuclear fusion
Explanation:
Classify each change (which can be manipulated within the green box) according to its effect on the wavelength.
a. Decrease frequency
b. Decrease damping
c. Decrease amplitude
d. Increase frequency
e. Increase amplitude
f. Increase damping
g. Shortens wavelength
Answers
Answer:
Explanation:
The classification will be made into 3 categories, which are
Ones that shortens wavelengths
Ones that lengthens wavelengths
Ones that has no effect on wavelengths
Shortens wavelengths -> Increase frequency
Lengthens wavelengths -> Decrease frequency
No effect -> Increase amplitude, decrease amplitude, increase damping, decrease damping.
What does the Curl-up test assess?
O A.
Body composition
ОВ.
Muscular strength and endurance
O C. Flexibility
D.
Cardiovascular fitness
HURRRY
(it’s pe not physics)
Answers
Answer:
assesses C.) muscular endurance
Explanation:
The law of conservation of angular momentum states that if no external force acts on an object, then its angular momentum does not change. true or false
Answers
Answer:
the answer is false.
Explanation:
i took the test and it is false trust me!!!!!!!!!
A radioactive material produces 1160 decays per minute at one time, and 4.0 h later produces 170 decays per minute. whats the half life
Answers
Answer:
Half life is 3.23 hours
Explanation:
Given
Decay rate at starting = 1160 decays per minute
Decay rate after 4 hours = 170 decays per minute
As we know know
[tex]N = N_0 *e ^{\Lambda *T}[/tex]
Substituting the given values, we get -
[tex]170 = 1160 *e ^{-4*\Lambda}\\0.1465 = e ^{-4*\Lambda}\\-0.834 = -4 * \Lambda\\\Lambda = 0.834/4\\\Lambda = 0.2085[/tex]
Also
[tex]t_{1/2} = \frac{ln2}{\Lambda}[/tex]
Substituting the given values we get -
[tex]t_{1/2} = =0.693/0.2085\\= 3.23[/tex]hours
When two substances that cannot dissolve each other are mixed, a ________ mixture is formed
Answers
Answer: hetero i think i dont know
Explanation:
Answer:
When two substances that cannot dissolve each other are mixed, a mixture is formed.
i hope this helps a little bit.
