candium forms the ion Sc3+. How many bromite ions could bond with Sc3+, and what would be the chemical formula?
a.3 bromite ions, Sc(Broa)2
b.2 bromite ions, Sc(BrO4)3
c.3 bromite ions, Sc(Broz)
d.2 bromite ions, Sc (BrO2)2​

Answer:

a. Sodium cyclopentanecarboxylate

b. No reaction

Explanation:

In this case, in the cyclopentanecarboxylic acid we have a carboxylic acid functional group. Therefore we have an "acid". The acids by definition have the ability to produce hydronium ions ([tex]H^+[/tex]).

With this in mind, for molecule a. we will have an acid-base reaction, because NaOH is a base. When we put together an acid and a base we will have as products a salt and water. In this case, the products are  Sodium cyclopentanecarboxylate (the salt) and water.

For the second molecule, we have the hydronium ion  ([tex]H^+[/tex]). This ion can not react with an acid. Because, the acid will produce the hydronium ion also, so a reaction between these compounds is not possible.

See figure 1

I hope it helps!

Answer:

Explan ionization energy, atomic radius, and electron affinityation:

This question most likely has answer choices. The possible answer choices are as followed:

The answers are Ionic radii tend to increase down a group, Cationic radii tend to decrease across a period, and Ionic radii increase when switching from cations to anions in a period (1st, 4th, and 5th options).

Answer:

The energy required to heat 1.30 kg of water from 22.4°C to 34.2°C is 64,121.2 J

Explanation:

Calorimetry is the measurement of the amount of heat that a body gives up or absorbs in the course of a physical or chemical process.

The sensible heat of a body is the amount of heat received or transferred by a body when undergoing a temperature variation (Δt) without there being a change in physical state. That is, when a system absorbs (or gives up) a certain amount of heat, it may happen that it experiences a change in its temperature, involving sensible heat. Then, the equation for calculating heat exchanges is:

Q = c * m * ΔT

Where Q is the heat or quantity of energy exchanged by a body of mass m, constituted by a substance of specific heat c and where ΔT is the variation in temperature (ΔT=Tfinal - Tinitial).

In this case:

Replacing:

[tex]Q=4.18 \frac{J}{g*K}*1,300 g*11.8 K[/tex]

Q= 64,121.2 J

The energy required to heat 1.30 kg of water from 22.4°C to 34.2°C is 64,121.2 J

The two layers are part of the thermosphere are  exosphere and ionosphere.

The Exosphere is the topmost layer of the Earth's atmosphere.

and its gradually disappear into the vacuum of space.

It consist two parts that are:

exosphere and ionosphere.

Thus, option "A" is correct, the rest of the option is not a part of thermosphere.

To learn more about  atmospheric layers click here:

https://brainly.com/question/25881294

#SPJ2

Answer:

hi hope your doing great the answer is A

Explanation:

its on Edge 2020

hope i helped :)

Answer:

The concentration in mol/L =  4.342 mol/L

Explanation:

Given that :

mass of sodium chloride = 25.4 grams

Volume of the volumetric flask = 100 mL

We all know that the molar mass of sodium chloride NaCl = 58.5 g/mol

and number of moles = mass/molar mass

The number of moles of sodium chloride = 25.4 g/58.5 g/mol

The number of moles of sodium chloride = 0.434188 mol

The concentration in mol/L = number of mol/ volume of the solution

The concentration in mol/L = 0.434188 mol/ 100 × 10⁻³ L

The concentration in mol/L =  4.34188 mol/L

The concentration in mol/L =  4.342 mol/L

Answer:

0 g.

Explanation:

Hello,

In this case, since the reaction between methane and oxygen is:

[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]

If 0.963 g of methane react with 7.5 g of oxygen the first step is to identify the limiting reactant for which we compute the available moles of methane and the moles of methane consumed by the 7.5 g of oxygen:

[tex]n_{CH_4}=0.963gCH_4*\frac{1molCH_4}{16gCH_4}=0.0602molCH_4\\ \\n_{CH_4}^{consumed}=7.5gO_2*\frac{1molO_2}{32gO_2}*\frac{1molCH_4}{2molO_2} =0.117molCH_4[/tex]

Thus, since oxygen theoretically consumes more methane than the available, we conclude the methane is the limiting reactant, for which it will be completely consumed, therefore, no remaining methane will be left over.

[tex]left\ over=0g[/tex]

Regards.

The total kinetic energy of a body is known as Thermal energy. Option A

Thermal energy is the direct sum of all the available random kinetic energies of molecules.

Also note that thermal energy is directly proportional to temperature in Kelvin.

Thus, the total kinetic energy of a body is known as Thermal energy. Option A

Learn more about thermal energy here:

https://brainly.com/question/19666326

#SPJ1

Answer:

A.) Thermal energy

Explanation:

I got it correct on founders edtell

Answer:

Electrical current drives nonspontaneous reactions in electrolytic cells.

Explanation:

Electrochemical cells are cells that produce electrical energy from chemical energy.

There are two types of electrochemical cells; voltaic cells and electrolytic cells.

A voltaic cell is an electrochemical cell in which electrical energy is produced from spontaneous chemical process while an electrolytic cell is an electrochemical cell where electrical energy is produced from nonspontaneous chemical processes. Current is needed to drive these nonspontaneous chemical processes in an electrolytic cell.

Answer:

electrolytic cells generate electricity through a non-spontaneous reaction while voltaic cells absorb electricity to drive a spontaneous reaction.

Explanation:

Answer via Educere/ Founder's Education

Answer:

OPTION C is correct

3.86 x 10-19 J

Explanation:

Energy of the line can be calculated using below formula

E= h ν.................(1)

Where E= energy

h= plank constant= 6.626 10-34 J s

c=speed of light=3 x 108 m/s

But we know that Velocity V= = c / λ

Then substitute into equation (1) we have

E = h c / λ.............(2)

We can calculate our( hc ) in nm for unit consistency

h c =( 6.626 ×10^-34)x(3×108)

h c = (1.986 x 10-16 )

hc = 1.986 x 10-16 J nm then since our (hc) and λ are in the same unit , were good to go then substitute into equation(2)

E = h c / λ = (1.986 x 10-16) / 515

E = 3.86 x 10-19 J

Therefore, the Energy is 3.86 x 10-19 J

Answer:

Volume : 1.25 L

Explanation:

We are given here that the volume ( V[tex]_1[/tex] ) = 1.50 Liters, the initial moles ( held at 25 °C ) = 3.00 mol, and the final moles ( n[tex]_2[/tex] ) = 3.00 - 0.5 = 2.5 mol. The final mol is calculated given that 0.50 mol of gas are released from the prior 3.00 moles of gas.

Volume ( V[tex]_1[/tex] ) = 1.50 L,

Initial moles ( n[tex]_1[/tex] ) = 3.00 mol,

Final Volume ( n[tex]_2[/tex] ) = 3.00 - 0.5 = 2.5 mol

Applying the combined gas law, we can calculate the final volume ( V[tex]_2[/tex] ).

P[tex]_1[/tex]V[tex]_1[/tex] / n[tex]_1[/tex]T[tex]_1[/tex] = P[tex]_2[/tex]V[tex]_2[/tex] / n[tex]_2[/tex]T[tex]_2[/tex] - we know that the pressure and temperature are constant, and therefore we can apply the following formula,

V[tex]_1[/tex] / n[tex]_1[/tex] = V[tex]_2[/tex] / n[tex]_2[/tex] - isolate V[tex]_2[/tex],

V[tex]_2[/tex] = V[tex]_1[/tex] n[tex]_2[/tex] / n[tex]_1[/tex] = 1.50 L [tex]*[/tex] 2.5 mol / 3.00 mol = ( 1.5 [tex]*[/tex] 2.5 / 3 ) L = 1.25 L

The volume of the balloon will be 1.25 L.

Answer:

The rate at which ZnCl2 appears increases.

Explanation:

Hello,

In this case, the reaction is:

[tex]Zn(s) + 2HCl (aq) \rightarrow ZnCl_2 (aq) + H_2 (g)[/tex]

Therefore, the law of rate proportions is:

[tex]\frac{1}{-1}r_{Zn}= \frac{1}{-2}r_{HCl}= \frac{1}{1}r_{ZnCl_2}= \frac{1}{1}r_{H_2}}[/tex]

In such a way, since the concentration of hydrochloric acid is increasing The rate at which ZnCl2 appears increases, because the addition of a reactant is directly related with the products formation due to the fact that more reactant will yield more product.

Best regards.

Answer : HBr polar

please add me to brainalist

Answer: D - 126.4g

Explanation:  

% Yield = Actual Yield/Theoretical Yield

38% = Actual Yield/332.5

38/100 = Actual Yield/332.5

(.38)(332.5) = 126.35 g = 126.4 g Actual Yield

Answer:

is D. the correct answer

Explanation:

I'm not sure if it is. Please let me know if I'm mistaking.

Answer:

The compound contains a o molecular orbital formed by the overlap of one carbon sp2 hybrid orbital and one hydrogen sp3 hybrid orbital.

Explanation:

Molecular orbital is function which describes wave like behavior of an electron in a molecule. The molecular orbital theory describes the electronic structure of molecule using quantum mechanics. Electrons are not assigned to individual bonds between atoms. The compound contains sp2 hybrid orbial which is polar C - CI bond.

The words given are not clear, so the clear question is as follows:

Match the words below to the appropriate blanks in the sentences. Make certain each sentence is complete before submitting your answer:

A. β-1,4- and α-1,6-glycosidic

B. α-1,4-glycosidic

C. α-1,4-galactose

D. an unbranched glucose

E. a branched fructose

F. α-1,6-glycosidic

Amylose is ......... polymer of ....... units joined by ........ bonds.

Amylopectin is ....... polymer of .......units joined by ........ bonds.

Answer:

D. an unbranched glucose

C. α-1,4-galactose

B. α-1,4-glycosidic

E. a branched fructose

A. β-1,4- and α-1,6-glycosidic

F. α-1,6-glycosidic

Explanation:

Amylose and amylopectin are two types of polysaccharides that can be found in starch granules.

Amylose is linear or unbranched glucose polymer of α-1,4-galactose units that are joined by α-1,4-glycosidic.

Amylopectin is a branched fructose polymer of β-1,4- and α-1,6-glycosidic units joined by α-1,6-glycosidic bonds.

Hence, the correct answers in the sequential order are:

Amylose:

D. an unbranched glucose

C. α-1,4-galactose

B. α-1,4-glycosidic

Amylopectin:

E. a branched fructose

A. β-1,4- and α-1,6-glycosidic

F. α-1,6-glycosidic

Answer:

To calculate the [OH-] in the solution we must first find the pOH

That's

pH + pOH = 14

pOH = 14 - pH

First to find the pH we use the formula

From the question

[H3O+]= 2.6 × 10^-8 M

pH = - log 2.6 × 10^-8

pH = 7.6

pH = 8

So we pOH is

pOH = 14 - 8 = 6

To find the [OH-] we use the formula

6 = - log [OH-]

Find antilog of both sides

The solution is slightly basic since it's pH is in the basic region and slightly above the neutral point 7

Hope this helps you

Answer:

Boiling

Explanation:

When a liquid is heated, the vapor pressure rises steadily. When water attains a temperature of 100°C or 212°F its vapor pressure is now equal to the atmospheric pressure at sea level, this is what we mean by boiling.

When this occurs, water continues to evaporate untill the vapor pressure inside the bubbles becomes high enough to stop water bubbles from collapsing again from the pressure of the water around it so the bubbles rise and break the surface.

Answer:

-170.65

188.8+ 256.8-205.8-(2x205.2)

-170.65 is the entropy change.

Entropy trade is the phenomenon that is the measure of change of disorder or randomness in a thermodynamic gadget. It is associated with the conversion of heat or enthalpy completed in work. A thermodynamic device that has extra randomness means it has high entropy.

Subtract the sum of the absolute entropies of the reactants from the sum of the absolute entropies of the products, each extended by using their suitable stoichiometric coefficients, to reap ΔS° for the reaction.

Learn more about entropy change here: https://brainly.com/question/14257064

#SPJ2

Answer:

30.12 mL.

Explanation:

We'll begin by calculating the molarity of the phosphoric acid. This can be obtained as follow:

Phosphoric acid H3PO4 will dissociate in water as follow:

H3PO4(aq) <==> 3H^2+(aq) + PO4^3-(aq)

From the balanced equation above,

1 mole of H3PO4 produces 3 moles of H+.

Therefore, XM H3PO4 will produce 8.70 M H+ i.e

XM H3PO4 = 8.70/3

XM H3PO4 = 2.9 M.

Therefore, the molarity of the acid solution, H3PO4 is 2.9 M.

Next, we shall write the balanced equation for the reaction. This is illustrated below:

2H3PO4 + 3Ba(OH)2 —> Ba3(PO4)2 + 6H2O

From the balanced equation above, we obtained the following:

Mole ratio of the acid, H3PO4 (nA) = 2

Mole ratio of the base, Ba(OH)2 (nB) = 3

Data obtained from the question include the following:

Molarity of base, Ba(OH)2 (Mb) = 6.50 M

Volume of base, Ba(OH)2 (Vb) =.?

Molarity of acid, H3PO4 (Ma) = 2.9 M

Volume of acid, H3PO4 (Va) = 45 mL

The volume of the base, Ba(OH)2 Needed for the reaction can be obtained as follow:

MaVa /MbVb = nA/nB

2.9 x 45 / 6.5 x Vb = 2/3

Cross multiply

2 x 6.5 x Vb = 2.9 x 45 x 3

Divide both side by 2 x 6.5

Vb = (2.9 x 45 x 3) /(2 x 6.5)

Vb = 30.12 mL

Therefore, the volume of the base, Ba(OH)2 needed for the reaction is 30.12 mL

Answer:

pH of the solution is 2.0

Explanation:

The lactic acid is a weak acid that is in equilibrium with water as follows:

Lactic acid + H2O ⇄ Lactate + H₃O⁺

And Ka for lactic acid: 1.38x10⁻⁴

Ka = 1.38x10⁻⁴ = [Lactate] [H₃O⁺] / [Lactic acid]

Initial concentration of lactic acid is (MW: 112.06g/mol):

80g * (1mol / 112.06g) / 1L = 0.714M

The equilibrium concentration of the species in the equilibrium are:

[Lactate] = X

[H₃O⁺] = X

[Lactic acid] = 0.714-X

Replacing in Ka expression:

1.38x10⁻⁴ = [X] [X] / [0.714-X]

9.8532x10⁻⁵ -  1.38x10⁻⁴X = X²

9.8532x10⁻⁵ -  1.38x10⁻⁴X - X² = 0

Solving for X:

X = -1.0x10⁻². False solution, there is no negative concentrations

X = 9.86x10⁻³M. Right solution.

As [H₃O⁺] = X

[H₃O⁺] = 9.86x10⁻³M

and pH = -log [H₃O⁺] = -log 9.86x10⁻³M

pH = 2.0

Answer:

A divergent plate boundary  

Explanation:

At a divergent boundary, the plates pull away from each other and generate new crust.

Answer:

Because the ocean becomes larger, this is a divergent plate boundary. Divergent plates cause the ocean floor to expand, making the ocean larger.

Explanation:

PLATO ANSWER

Answer:

The reaction given is:

In (g) + H₂ (g) ⇔ InH₂ (g), the Kp is 1.48 at 973 K.

The partial pressures measured in the reaction vessel is Partial pressure of In is 0.0540 atm, partial pressure of H₂ is 0.0250 atm, and the partial pressure of InH₂ is 0.0780 atm. By using the table given in the attachment below, the value of PInH₂ is (0.078-x), PIn is (0.054 + x), and the value of PH2 is (0.025 + x).

Kp = PInH₂/PIn × PH₂ = (0.078 - x) / (0.054 +x) (0.025 + x)

1.48 = (0.078 - x) / (0.054 +x) (0.025 + x)

x = 0.06689

Now the partial pressures of In, H₂ and InH₂ will be,

PH₂ = 0.025 + x = 0.025 + 0.0668 = 0.0918 atm

PIn = 0.054 + 0.0668 = 0.1208 atm

PInH₂ = 0.078 - 0.0668 = 0.0112 atm

Now the Qp or the reaction quotient will be,

Qp = (0.078) / (0.054) (0.025) = 57.78.

Answer:

THE MOLAR HEAT CAPACITY OF HEXANE IS 290.027 J/ C

Explanation:

1604 J of heat is added to 48.9 g of hexane

To calculate the molar heat capacity of hexane, it is important to note that the molar heat capacity of a substance is the measure of the amount of heat needed to raise 1 mole of a substance by 1 K.

Since 1604 J of heat = 48.9 g of hexane

Molar mass of hexane = 86 g/mol = 1 mole

then;

1604 J = 48.9 g

x = 86 g

x = 1604 * 86 / 48.9

x = 4205.4 J

Hence, 4205.4 J of heat will be added to 1 mole or 86 g of hexane to raise the temperature by 14.5 C.

In other words,

heat = molar heat capacity * temperature change

molar heat capacity = heat/ temperature change

Molar heat capacity = 4205.4 J / 14.5 C

Molar heat capacity = 290.027 J/C

The molar heat capacity of hexane is 290.027 J/ C

Answer:

Companies know that people will be willing to spend more to get an in-demand product.

Explanation:

When a product is really in demand, many customers are willing to part with more money order to purchase the product, as a result of that, many companies may take advantage of the increasing demand for the product to hike it's price.

Hence, the increase in price may not really have a negative impact on the quantity demanded because the demand for the product is high and customers are willing to spend more money in order to purchase an in-demand product, hence the answer above.

Prices increase when demand is high because companies know that people will be willing to spend more to get in-demand products.

Prices generally increase with higher demand for goods because the higher demand creates pressure for the supply to meet up.

Manufacturing companies can either increase their production to meet up with demand at the same price or capitalize on the situation to make more money by increasing the price without increasing the supply.

Since there is a buying pressure on the product in the market already, people would still be open to buying even at higher prices.

More on demand and prices can be found here: https://brainly.com/question/16170198?referrer=searchResults

Answer:

d) a solution that is 0.025M in HCOOH and 0.025M in HCOONa

Explanation:

The reaction of a weak acid (HOOH) with NaOH is as follows:

HCOOH + NaOH → HCOONa + H₂O

Based on the reaction, 1 mole of the acid reacts with 1 mole of the base (Ratio 1:1).

The initial moles of both species are:

HCOOH: 0.050L × (0.1mol / L) = 0.0050 moles of HCOOH

NaOH: 0.050L × (0.05 mol / L) = 0.0025 moles NaOH

After the reaction, all NaOH reacts with HCOOH producing HCOONa (Because moles of NaOH < moles HCOOH).

Final moles:

HCOOH: 0.0050 moles - 0.0025 moles (After reaction) = 0.0025 moles

HCOONa: Moles HCOONa = Initial Moles NaOH: 0.0025 moles

As volume of the mixture is 100mL (50 from the acid + 50 from NaOH), molarity of both HCOOH and HCOONa is:

0.0025 moles / 0.100L = 0.025M of both HCOOH and HCOONa

Thus, the initial mixture is equivalent to:

Answer:

2

Explanation:

A single covalent bond is formed when two electrons are shared between the same two atoms, one electron from each atom.

Answer:

the answer is 2

Explanation:

Answer:

A) 3.17 g of Zn

Explanation:

Let's consider the reduction of Zn(II) that occurs in an electrolysis bath.

Zn⁺²(aq) + 2e⁻ → Zn(s)

We can establish the following relations:

The mass of Zn deposited under these conditions is:

[tex]24min \times \frac{60s}{1min} \times \frac{6.5C}{s} \times \frac{1mol\ e^{-} }{96,468C} \times \frac{1molZn}{2mol\ e^{-}} \times \frac{65.38g}{1molZn} = 3.17 g[/tex]

Answer:

A.) 3.17

Explanation:

I got it right in class!

Hope this Helps!! :))

Answer:

-434.14 kJ

Explanation:

Step 1: Write the balanced equation

4 NH₃(g) + 5 O₂(g) ⇒ 4 NO(g) + 6 H₂O(g)

Step 2: Calculate the standard free energy change (ΔG°r) for the reaction

We will use the following expression.

ΔG°r = 4 mol × ΔG°f(NO(g)) + 6 mol × ΔG°f(H₂O(g)) - 4 mol × ΔG°f(NH₃(g)) - 5 mol × ΔG°f(O₂(g))

ΔG°r = 4 mol × (86.55 kJ/mol) + 6 mol × (-228.57 kJ/mol) - 4 mol × (-16.45 kJ/mol) - 5 mol × (0 kJ/mol)

ΔG°r = -959.42 kJ

Step 3: Calculate the standard free energy change for 1.81 moles of NH₃

959.42 kJ are released per 4 moles of NH₃.

[tex]\frac{-959.42 kJ}{4mol} \times 1.81mol = -434.14 kJ[/tex]

Answer:

d. 8 moles of H2O on the product side

Explanation:

Hello,

In this case, we need to balance the given redox reaction in acidic media as shown below:

[tex]MnO_4^{1-} (aq) + Cl^{1-} (aq) \rightarrow Mn^{2+} (aq) + Cl_2 (g)\\\\(Mn^{7+}O^{2-}_4)^{1-} (aq) + Cl^{1-} (aq) \rightarrow Mn^{2+} (aq) + Cl_2 (g)\\\\\\\\(Mn^{7+}O^{2-}_4)^{1-} (aq)+8H^++5e^- \rightarrow Mn^{2+}+4H_2O\\\\2Cl^{1-}\rightarrow Cl_2^0+2e^-\\\\2*[(Mn^{7+}O^{2-}_4)^{1-} (aq)+8H^++5e^- \rightarrow Mn^{2+}+4H_2O]\\\\5*[2Cl^{1-}\rightarrow Cl_2^0+2e^-]\\\\\\\\2(Mn^{7+}O^{2-}_4)^{1-} (aq)+16H^++10e^- \rightarrow 2Mn^{2+}+8H_2O\\\\10Cl^{1-}\rightarrow 5Cl_2^0+10e^-\\[/tex]

Then, we add the half reactions:

[tex]2(Mn^{7+}O^{2-}_4)^{1-} (aq)+16H^++10Cl^{1-} \rightarrow 2Mn^{2+}+8H_2O+5Cl_2^0[/tex]

Thereby, we can see d. 8 moles of H2O on the product side.

Best regards.

Answer:

- Addition of Ba(OH)2: favors the formation of a precipitate.

- Undergo a chemical reaction forming soluble species.

- Addition of CuSO4 : favors the formation of a precipitate.

Explanation:

Hello,

In this case, since the dissociation reaction of barium sulfate is:

[tex]BaSO_4(s)\rightleftharpoons Ba^{2+}(aq)+SO_4^{2-}(aq)[/tex]

We must analyze the effect of the common ion:

- By adding barium hydroxide, more barium ions will be added to the equilibrium system so the formation of solid barium sulfate will be favored (reaction shifts leftwards towards reactants).

- By adding sodium nitrate, the following reaction will undergo:

[tex]BaSO_4(s)+NaNO_3(aq)\rightarrow Ba(NO_3)_2(aq)+Na_2SO_4(aq)[/tex]

So the precipitate will turn into other soluble species.

- By adding copper (II) sulfate, more sulfate ions will be added to the equilibrium system so the formation of solid barium sulfate will be favored (reaction shifts leftwards towards reactants).

All of this is supported by the Le Chatelier's principle.

Best regards.