Choose the mixed number that is equivalent to $ 5.08.

5 8/100

5 80/100

80/100

8/100​

Answer:

The final pressure is approximately 0.78 atm

Explanation:

The original temperature of the gas, T₁ = 263.0 K

The final temperature of the gas, T₂ = 298.0 K

The original volume of the gas, V₁ = 24.0 liters

The final volume of the gas, V₂ = 35.0 liters

The original pressure of the gas, P₁ = 1.00 atm

Let P₂ represent the final pressure, we get;

[tex]\dfrac{P_1 \cdot V_1}{T_1} = \dfrac{P_2 \cdot V_2}{T_2}[/tex]

[tex]P_2 = \dfrac{P_1 \cdot V_1 \cdot T_2}{T_1 \cdot V_2}[/tex]

[tex]P_2 = \dfrac{1 \times 24.0 \times 298}{263.0 \times 35.0} = 0.776969038566[/tex]

∴ The final pressure P₂ ≈ 0.78 atm.

Answer:

B) 0.6M

Explanation:

               I apologize in advance if it is not correct :l

The (M1V1= M2V2) is given for you to plug in the correct numbers so let's jot this down.

                    (M1*V1= M2*V2)

so they give us 6M which would be our (M1), from this we can also conclude that 5mL is also V1; ( if you notice the M1's and V1's are always found next to eachother). This leads us to our 50mL, this would be our V2 because the volume went from 5mL to 50mL. Now lets put this in order based on what we know.

M1= 6M                                (M1*V1= M2*V2)

V1= 5mL

M2= ?

V2= 50mL

now we plug in what we know into the equation to find the unknown (M2)

                   (6M*5mL= M2*50mL)

now we could do the long math, but I don't think your on brainly to do the hard way. so lets keep it simple!

                   We are going to put the 50mL under the (6M*5mL) for division.

                             [tex]\frac{(6M*5mL)}{(50mL)}[/tex] This is honestly MUCH easier, than manually answering. you just put that in the calculator and it'll give you B) 0.6M

   honestly though I might not know what I'm doing cuz im currently doing my test and decided to answer this question ;)

        Good Luck!

Answer:

A molecular compound is usually composed of two or more nonmetal elements. Molecular compounds are named with the first element first and then the second element by using the stem of the element name plus the suffix -ide.

Answer:

Speed of jays increases first, again increases, decreases and then increases.

Explanation:

The speed of jays increases while moving from rest to point A and no acceleration due to constant speed. From point A to point B, the speed is continues to increase and no acceleration. From point B to point C, the speed of jays decreases and acceleration is produced in the journey due to change of speed and from point C to point D, the speed of jays again increases and acceleration is produced due to increasing the speed.

Answer:

The speed of jay's walk increases first, again increases, then it decreases and then increases due to his acceleration walk during parts A-D.

Explanation:

Answer:

Hydrocarbons

Hydrocarbons are chemical compounds that contain the elements carbon and hydrogen only. They are compounds that are obtained from the fossil fuel crude oil by a process called fractional distillation.

Fractional distillation

Fractional distillation separates the crude oil mixture into a number of smaller, different parts called fractions. The fractionating column is hot at the bottom and cool at the top. Substances with high boiling points condense at the bottom and substances with lower boiling points condense on the way to the top.

The crude oil is evaporated and its vapours condense at different temperatures in the fractionating column. Each fraction contains hydrocarbon molecules with a similar number of carbon atoms, smaller molecules nearer the top and longer molecules nearer the base of the column.

Oil fractions

The diagram below summarises the main fractions from crude oil and their uses and the trends in properties. Note that the gases leave at the top of the column, the liquids condense in the middle and the solids stay at the bottom.

Explanation:

mark me as brainlist

The substances which are generally used to generate heat and light energy on burning are called fuels. The diesel fuel contains the largest molecules. Thus option A is correct.

The diesel fuel which is also called the diesel oil is found to be a combustible liquid and it is produced from the fractions of crude oil. The diesel fuel is found to be less volatile than the gasoline.

The chemical composition of a diesel fuel is usually denoted as C₁₂H₂₄. Apart from the carbon and hydrogen atoms small amounts of 'S', 'N' and 'O' are also present in the diesel.

Here gasoline is a derivative product obtained by the fractional distillation of crude oil and it is generally used in passenger vehicles whereas kerosene is a highly flammable liquid obtained from the distillation of petrol and is less volatile than gasoline.

The gasoline contains only 4 to 12 'C' atoms per molecule and it is a lightweight hydrocarbon mixture. The number of 'C' atoms in kerosene ranges from 10 to 16 per molecule and the diesel fuel is known as the heavyweight hydrocarbon mixture with 8 to 21 'C' atoms per molecule.

Thus diesel fuel consists of larger hydrocarbon molecules than gasoline and kerosene.

Thus the correct option is A - Diesel.

To know more about Fuels, visit;

https://brainly.com/question/29526169

#SPJ6      

Answer:matter

Explanation:

matter

make brain

Answer:

2.7 atm = 2052 torr

I hope this helps you.

Answer:

2052 torr

Explanation:

Multiply 2.7 atm by the conversion factor to torr which is 760 torr = 1 atm

Answer:

107.87 grams

Explanation:

One mole of silver weighs 107.87 grams .

Answer:

234.68g

Explanation:

We understood from Avogadro's hypothesis that 1mole of any substance contains 6.02x10^23 atoms. Therefore, 1mole of Fe2O3 also contains 6.02x10^23 atoms

1 mole of Fe2O3 = (56x2) + (16x3) = 112 + 48 = 160g

Now, if 160g of Fe2O3 contains 6.02x10^23 atoms,

Therefore Xg of Fe2O3 will contain 8.83×10^23 atoms i.e

Xg of Fe2O3 = (160x8.83×10^23)/6.02x10^23 = 234.68g

Answer:

Formula: [tex]Velocity \: V = f \lambda \\ Solution: = 5 \times 0.8 \\ = 4 \: {ms}^{ - 1} [/tex]

Answer:

The first guy is correct. That's what I got too

Answer:

topaz and corundum

Explanation:

i know things

Answer:

the nucleus

Explanation:

He proposed that the mass of an atom is concentrated in the nucleus which occupies a small volume in the center .He added that the nucleus comprises the protons and neutrons.where the neutron had no charge while the protons had charge of +1

Answer:

the nucleus

Explanation:

Answer:b

Explanation:

Answer:

B, C

Explanation:

Hope it helps i read it all

Answer: D

Explanation:

The car will move to the left because Sam is implying a grater force (3 N < 6 N) but it is traveling at a constant speed because there is still a force being acted upon it. <3

The result of applying forces to a toy car is required.

Option D is correct.

Force applied by Bobby is 3 N to the right

Force applied by Sam is 6 N to the left

Right is taken as positive and left is taken as negative.

m = Mass of toy

a = Acceleration

Net force applied to the toy

[tex]F=3-6\\\Rightarrow F=-3\ \text{N}\\\Rightarrow ma=-3\\\Rightarrow a=\dfrac{-3}{m}[/tex]

So, the toy will move left with a constant acceleration.

Constant acceleration means its speed will be increasing.

So, option D is correct.

Learn more:

https://brainly.com/question/18373733?referrer=searchResults

Answer:

Q = 63.9 kJ

Explanation:

Given that,

Mass of ice, m = 300 g

We need to find the heat needed to heat the given amount of ice at -5.00°C into steam at 100.°C

The specific heat of ice, c = 2.03 J/g °C

The formula for heat needed is given by :

[tex]Q=mc\Delta T\\\\Q=300\times 2.03\times (100-(-5))\\\\Q=63945\ J\\\\Q=63.9\ kJ[/tex]

So, 63.9 kJ of heat is needed.

Answer: B. Hydrogen Bonding

Explanation: I got it right on castle learning lol

There are different kinds of forces. The term that identifies a type of intermolecular force is hydrogen bonding.

The three known to be types of intermolecular interactions. They  are

Hydrogen bonding is known to be an intermolecular force that takes place between two molecules. That molecule is known to have a hydrogen atom be bonded to a nitrogen, oxygen, or fluorine atom.

Learn more about Bond from

https://brainly.com/question/1420470

Answer:

I think it could be bad for some people because children could be exposed to toxic content. Without parent restrictions there could be some serious harm. Another reason, is that being on social media could distract kids from homework, chores, etc. (There is also scams and fake advertising)

I personally deleted a lot of my social media acc’s last year cause of me getting stressed and sad over it, but for now I’m pretty good I’m making friends off it having lots of fun

Answer:

The pressure of the gas is 224839.8 atm

Explanation:

As we know

PV = nRT

Substituting the given values, we get -

P * 1 L = 90.1 moles * 8.314 4621(75). J K−1 mol−1 * 300

P = 224839.8 atm

The pressure of the gas is 224839.8 atm

Answer:

Molarity of a solution where one mole of NaOH is added to 2000mL of water is 0.0005

Explanation:

Molarity is the equal to number of moles of solute divided by total volume of solvent

Given -

Number of moles of solute i.e  NaOH = 1

Total volume of solvent i.e water = 2000 mL

Molarity [tex]\frac{1}{2000} = 0.0005[/tex]

Answer:

Graphene is made of pure carbon.

Explanation:

It is a material in which the carbon atoms are arranged in a single layer, creating a honeycomb pattern. It should be stressed that this layer of carbon is only one atom thick, although some authors consider up to ten layers of carbon to be graphene.

please mark me brainliest

Answer:

Molality = 9.498 mol  k g − 1

Explanation:

A final way to express the concentration of a solution is by its molality. The molality ( m ) of a solution is the moles of solute divided by the kilograms of solvent. A solution that contains 1.0 mol of NaCl dissolved into 1.0 kg of water is a “one-molal” solution of sodium chloride.

molality = number of moles of solute/ mass of solvent in kg

number of moles of KI = mass of KI / molar mass of KI  

number of moles of KI = 9.49.8 g / 1.00 g  m o l − 1

number of moles of KI = 9.498 moles  

molality = 9.498 moles / 1kg  

molality = 9.498 mol  k g − 1

Answer:

1. Moles of oxygen required to react with 5 moles of C₈H₁₈ = = 62.5 moles of oxygen

2. Mass of oxygen required = 2000 g of oxygen

3. Moles of CO₂ that will be produced = 40 moles of CO₂

4. Mass of CO₂ that will be produced = 1760 g of CO₂

5. Moles of H₂O that will be produced = 45 moles of H₂O

Explanation:

Balanced equation of the reaction : 2 C₈H₁₈ + 25 O₂ ---> 16 CO₂ + 18 H₂O

1. Mole ratio of Oxygen and C₈H₁₈ = 25 : 2

Moles of oxygen required to react with 5 moles of C₈H₁₈ = 5 × 25/2 moles

Moles of oxygen required to react with 5 moles of C₈H₁₈ = = 62.5 moles of oxygen

2. Mass of oxygen required = number of moles of oxygen × molar mass of oxygen

Molar mass of oxygen = 32.0 g/mol

Mass of oxygen required = 62.5 moles × 32.0 g/mol

Mass of oxygen required = 2000 g of oxygen

3. Mole ratio of CO₂ and C₈H₁₈ = 16 : 2

Moles of CO₂ that will be produced = 5 × 16/2 moles

Moles of CO₂ that will be produced = 40 moles of CO₂

4. Mass of CO₂ that will be produced = number of moles of CO₂ × molar mass of CO₂

Molar mass of CO₂ = 44.0 g/mol

Mass of CO₂ that will be produced = 40 moles × 44 g/mol

Mass of CO₂ that will be produced = 1760 g of CO₂

5. Mole ratio of H₂O and C₈H₁₈ = 18 : 2

Moles of H₂O that will be produced = 5 × 18/2 moles of H₂O

Moles of H₂O that will be produced = 45 moles of H₂O

Answer:

Sperm Cell

Explanation:

Answer:

The answer is "Option B"

Explanation:

Formula:

Na atoms= Na atoms moles \times  NA

               [tex]= \frac{mass}{Na \ Molar\ mass} \times 6.022 \times 10^{23}\\\\= \frac{9.2}{23} \times 6.022 \times 10^{23}\\\\=0.2875 \times 6.022 \times 10^{23}\\\\=2.4 \times 10^{23}\ atoms \\\\[/tex]

Answer:

13.25 M

Explanation:

Molarity is moles over liters so simply plug your values in as such:

5.30 mol ÷ 0.400 L = 13.25 M

Answer:

5ppm

Explanation:

there are 1 million (1,000,000) µg (micrograms or mcg) per g (gram) ("micro" means millionth). So, 4. 1 part per million (ppm) for a 1g sample is 1 µg or .

I know you said no links, but this is a converter that explained it much better than I know how to

http://www.endmemo.com/sconvert/ppmug_g.php#:~:text=%C2%BB%20Microgram%2Fgram%20Conversions%3A&text=ug%2Fg%E2%86%94ppm%201%20ug%2Fg%20%3D%201%20ppm

heres a screenshot of the site (since i understand links are awful)