Write the charge balance for an aqueous solution of arsenic acid, H3AsO4, in which the acid can dissociate to H2AsO24 , HAsO24 2, and AsO34 2. Look up the structure of arsenic acid in Appendix G and write the structure of HAsO24 2.
Answer:
Kindly check the explanation section.
Explanation:
When the Arsenic acid,H3AsO4 is put in water it dissociates to form or give out 1 proton, 2 protons or 3 protons that is 1H^+, 2H^+ and 3H^+. Check the equation showing the dissociation reactions as given below;
H3AsO4 ===========> H^+ + AsO4^-
H3AsO4 ===========> 2H^+ + AsO4^2-
H3AsO4 ===========> 3H^+ + AsO4^3-
Therefore, the total charge balance is given as:
[H^+] =[OH^-] + [ AsO4^-] + 2[ AsO4^2-] + 3[ AsO4^3-].
Kindly note that the [OH^-] is from water.
A scientist claimed that he radiocarbon dated a fossilized skull of a dinosaur and found it to be about 63 million years old. Do you support his claim? Provide at least one scientifically based reason why you do or do not support the claim.
Answer:Since dinosaurs are thought to be over 65 million years old, the news is stunning - and more than some could tolerate. After the AOGS-AGU conference in Singapore, the abstract was removed from the conference website by two chairmen because they could not accept the findings. Unwilling to challenge the data openly, they erased the report from public view without a word to the authors. When the authors inquired, they received this letter:
Explanation:
i do not own my copyrights
8. What energy transformations take place in a simple electric motor?
D. light --> electrical
B. kinetic --> electric
A. chemical => solar
C. electrical -> kinetic
Answer:
I don't know
Explanation:
just wanna talk because I am getting bored.
Answer:
B)
takes mechanical energy and makes it electrical
Explanation:
The chemical formula for magnesium oxide is MgO. A chemist determined by measurements that 0.030 moles of magnesium oxide participate in a chemical reaction. Calculate the mass of magnesium oxide that participates.
Answer:
1.209g of MgO participates
Explanation:
In this problem, we have 0.030 moles of MgO that participates in a particular reaction.
And we are asked to solve for the mass of MgO that participates, that means, we need to convert moles to grams.
To convert moles to grams we need to use molar mass of the compound:
1 atom of Mg has a molar mass of 24.3g/mol
1 atom of O has a molar mass of 16g/mol
That means molar mass of MgO is 24.3g/mol + 16g/mol = 40.3g/mol
And mass of 0.030 moles of MgO is:
0.030 moles MgO * (40.3g/mol) =
1.209g of MgO participatesReacting 10.0 mL of H2(g) with 10.0 mL of C2H4(g) produces 10.0 mL of C2H6 at 1.5 atm. If the reaction produces 3.1 kJ of heat and the decrease in volume requires the heat surroundings do 7.6 J of work on the gases, what is the change in internal energy of the gases?
Answer:
the change in internal energy of the gases is -3.0924 KJ
Explanation:
The computation of the change in internal energy of the gases is as follows;
Given that
Q = -3.1 KJ
= -3100 J
It is negative as the heat is lost from the mixture
And,
W = + 7.6 J
It is positive as the work is done in the mixture
Now we use the following equation
Delat E = Q + W
= -3100 J + 7.6 J
= -3092.4 J
= -3.0924 KJ
Hence, the change in internal energy of the gases is -3.0924 KJ
Which of the following is true if the net force on an object is zero? (1 pt) a. The object must be at rest. b. The object’s speed will decrease. c. The object’s speed will increase. d. The object’s direction of motion can change, but its speed will not. e. None of the above.
Explanation:
the object must be at rest
Which of the following shows correctly an ion pair and the correct formula for the ionic compound the two ions form?
A) Cu1+, O2–; CuO
B) Cr3+, I–; CrI
C) Sn4+, N3–; Sn4N3
D) Fe3+, O2–; Fe2O3
Answer:
D) Fe³⁺, O²⁻; Fe₂O₃
Explanation:
Option D shows correctly an ion pair and the correct formula for the ionic compound the two ions form.
Ion pairs of iron and oxygen react to form iron (III) oxide. The iron (III) oxide is one of the oxides of iron. The compound is usually attacked by acids and it is often called rust. It is used in the feedstock of the steel and iron industries. This means that the compound is used in the production of iron, steel, and many alloys.
Below are some equations:
4 Fe + 3 O₂→ 2 Fe₂O₃
Fe⁰ + 3O₂⁰ → Fe³⁺O₃²⁻
Which type of rock forms when an existing rock changes under extreme pressure and intense heat?
A
igneous
B
sedimentary
C
metamorphic
Answer:
c
Explanation:
metamorphic rocks
Answer:
C. Metamorphic
Explanation:
A 10 gram sample of iron reacts with oxygen to form 18.2 grams of ferric oxide. How many grams of oxygen reacted?
Answer:
[tex]\boxed {\boxed {\sf 8.2 \ grams}}[/tex]
Explanation:
According to the Law of Conservation of Mass, the mass of the products must equal the mass of the reactants.
mass products = mass reactantsIn this problem, the reaction is:
[tex]iron + oxygen = ferric \ oxygen[/tex]
The reactants are iron and oxygen. We know the mass of the iron sample is 10 grams. The product is ferric oxide. The mass of the ferric oxide sample is 18.2 grams.[tex]10 \ g + oxygen=18.2 \ g[/tex]
We want to find how many grams of oxygen reacted. We have to get the oxygen by itself. 10 is being added to oxygen. The inverse of addition is subtraction. Subtract 10 from both sides of the equation.
[tex]10 \ g - 10 \ g+ oxygen = 18.2 \ g - 10 \ g[/tex]
[tex]oxygen= 18.2 \ g - 10 \ g[/tex]
[tex]oxygen= 8.2 \ g \\[/tex]
8.2 grams of oxygen reacted with 10 grams of iron to form 18.2 grams of ferric oxide.
Find the element:
1. A group 12 metal that was once used in thermometers, but now it’s know to be poisonous.
2. Has 3 valence electrons and 4 energy levels.
4. The only metalloid with 3 valence electrons.
5. It’s most common isotope has 5 neutrons.
Answer:
.
Explanation:
mercurygalliumboronberylliumDescribe the process of dimensional analysis and explain why it is so useful in chemical problem solving.
Answer:
Dimensional Analysis (also called Factor-Label Method or the Unit Factor Method) is a problem-solving method that uses the fact that any number or expression can be multiplied by one without changing its value. It is a useful technique.
hydrocarbon structures methopane
Can anyone solve this?
Answer:
3P2O5:
P:6 O:15
5CO2
C:5 O:10
3C6H12O6
C:18 H:36 O:18
4C6H12
C:24 H:48
3Mg3(PO4)2
Mg:9 P:2 O: 8
4(NH4)2S
N:8 H:32 S:4
The volume of a gas with an initial pressure of 380 mmHg atm increases from 5.0 L to 8.0 L. What is the final pressure of the gas, in atm, assuming no change in moles or temperature?
A) 238 atm
B) 2.4 atm
C) 0.31 atm
D) 0.80 atm
E) 8.0 atm
Answer:
0.31 atmExplanation:
The new pressure can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we are finding the new pressure
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
From the question
760 mmHg = 1 atm
380 mmHg = 0.5 atm
We have
[tex]P_2 = \frac{0.5 \times 5}{8} \\ = 0.3125[/tex]
We have the final answer as
0.31 atmHope this helps you
A solution contains 9.25x103 M copper(II) nitrate and 1.40x102 M manganese(II) acetate. Solid potassium carbonate is added slowly to this mixture.
A. What is the formula of the substance that precipitates first?
B. What is the concentration of carbonate ion when this precipitation first begins?
Answer:
Explanation:
Concentration of Cu⁺² = 9.25 x 10³ M
Concentration of Mn⁺² = 1.4 x 10² M
solubility product of copper carbonate = 7.08 x 10⁻⁹
solubility product of manganese carbonate = 2.24 x 10⁻¹¹
solubility product of later is less so carbonate of manganese will come out first .
B )
[ Mn⁺² ] [ CO₃⁻² ] = 2.24 x 10⁻¹¹
1.4 x 10² [ CO₃⁻² ] = 2.24 x 10⁻¹¹
[ CO₃⁻² ] = 1.6 x 10⁻¹³ .
the concentration of carbonate ion when this precipitation first begins
= 1.6 x 10⁻¹³ M .
The cell membrane around a cell forms a barrier that protects and regulates the cell. Certain chemicals can pass through the plasma membrane because they have similar chemical properties as the membrane.
Which best describes those that can pass through?
They are concentrated.
They are soluble.
They are diluted.
They are heated.
Answer:
it is b (they are soluble)
Explanation:
got it right on edg and on quizlet
Answer:
B. They are soluble
Explanation:
Which balance equation represents a single replacement reaction
Answer: A single replacement reaction looks sort of like this
A + BC —> AC + B
Explanation: It would be a LOT more helpful for us if you had provided the answer choices for this question, but I'll try to help by explaining WHAT single-replacement reactions are.
Single-replacement reactions are reactions in which one ion displaces another to form a new compound . One reactant is an element; one reactant is a compound . One product is an element; one product is a compound . The reactant element is part of the compound product .
I hope this helped!
How do atoms form chemical bonds
Answer:
Atoms form chemical bonds to achieve a full outer energy level, which is the most stable arrangement of electrons. A chemical bond is a force of attraction between atoms or ions. Bonds form when atoms share or transfer valence electrons. In a covalent bond, two atoms share one or more electrons.
How many moles of aluminum are equivalent to 4.816 × 1024 atoms?
A.12.5
B.8
C.1.25
D.08
Answer:
6.591
Explanation:
= 6.951 moles
Answer: 8
Explanation:
How many H atoms in Mg(OH)2
Answer:
Explanation:
There are 2.
what does the changing the Aperture do when taking a photo? *
4.What effect can you get from using a slow shutter speed? *
5.What effect can you create by using a quick shutter speed
Answer:
Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.
The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.
Explanation:
ADD NOTE
O QUESTION
1. A student notices that the moon is full one evening. Which sequence of moon phases
will the student observe over the next eight days?
O
Full, waxing gibbous, new, waning crescent
O
Full, waning gibbous, first quarter, waning crescent
O
Full, new, waning gibbous
O
Full, waning gibbous, third quarter
CLEAR AL
oooo
A fruit juice has a very sour taste. What does this most likely indicate?
A. The juice is a metal
B. The juice is a salt
C. The juice is an acid
D. The juice is a base
Explanation:
its hard its either B or C i dont wanna be wrong;-;
Answer:
The Juice wouldnt be a metal, Salt isnt that effective in juice if you have sensitive tastebuds. Your answer is C. THe Juice is an acid
Explanation:
In the reaction of aluminum with iron III oxide, if you start with 54.2 grams of aluminum, how many grams of iron III oxide are needed for the reaction to occur?
Answer:
[tex]m_{Fe_2O_3}=160.41gFe_2O_3[/tex]
Explanation:
Hello!
In this case, since the reaction between aluminum and iron (III) oxide is:
[tex]2Al+Fe_2O_3\rightarrow Al_2O_3+2Fe[/tex]
In such way, since there is 2:1 mole ratio between aluminum (atomic mass = 26.98 g/mol) and iron (III) oxide (molar mass = 159.70 g/mol), we'll be able to compute the mass of the required reactant as shown below:
[tex]m_{Fe_2O_3}=54.2gAl*\frac{1molAl}{26.98gAl}* \frac{1molFe_2O_3}{2molAl}*\frac{159.70gFe_2O_3}{1molFe_2O_3}\\\\m_{Fe_2O_3}=160.41gFe_2O_3[/tex]
Best regards!
What element has the noble gas configuration [Ne]3s23p??
Answer:
Sulfur
Explanation:
The first ten electrons of the sodium atom are the inner-shell electrons and the configuration of just those ten electrons is exactly the same as the configuration of the element neon (Z = 10).
...
Noble Gas Configurations.
Element Name Sulfur
Symbol S
Atomic Number 16
Noble Gas Electron Configuration [Ne]3s23p4
The noble-gas notation for the element indium, (In, atomic #49) is:
A.
?
[Kr]5p?
B.
?
[KrJ5524d105p
C.
?
[Kr]5s25d 105p1
D. ?
[Kr]5524f1450 105p1
Answer:[tex][Kr]4d^{10}5s^25p^1[/tex]
Explanation:
The element Indium with atomic number 49 will have 49 protons and 49 electrons in it.
Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom. The electrons are filled according to Afbau's rule in order of increasing energies and the nearest noble gas is Krypton with 36 electrons.
The electronic configuration in terms of noble gas configuration is:
[tex]In:49:[Kr]4d^{10}5s^25p^1[/tex]
The noble-gas notation for the element indium is [Kr} 4d¹⁰5s²5p¹. The correct option is B. [Kr] 5s2 4d10 5p1
From the question,
We are to write the electron configuration of the element Indium, using the appropriate noble gas notation.
The noble gas that comes before Indium (In) is Krypton (Kr). Therefore, the noble gas that will be used in the notation is Krypton.
Indium has an atomic number of 49 while Krypton has an atomic number of 36. This means we will fill in 13 more electrons.
The electron configuration for the element indium using the noble-gas notation is
[Kr} 4d¹⁰5s²5p¹
Hence, the noble-gas notation for the element indium is [Kr} 4d¹⁰5s²5p¹. The correct option is B. [Kr] 5s2 4d10 5p1
Learn more here: https://brainly.com/question/4194872
What are four the main causes of erosion? wind, water, ice, gravity O biological, chemical, mechanical, subterranean O freezing, hydration, oxidation, salt crystallization O seismic movement, vocalism, mountain building, ocean waves
Answer:
Water, wind, ice, and gravity
Explanation:
I took the quiz ;)
. Consider the following half-reactions:
Ag+(aq) + e– → Ag(s) E = +0.80 V
Cu2+(aq) + 2 e– → Cu(s) E = +0.34 V
Pb2+(aq) + 2 e– → Pb(s) E = –0.13 V
Fe2+(aq) + 2 e– → Fe(s) E = –0.44 V
Al3+(aq) + 3 e– → Al(s) E = –1.66 V
Which of the above metals or metal ions will reduce Pb2+(aq)?
a. Ag+(aq) and Cu2+(aq)
b. Ag(s) and Cu(s)
c. Fe2+(aq) and Al3+(aq)
d. Fe(s) and Al(s)
e. Cu2+(aq) and Fe2+(aq)
d. Fe(s) and Al(s)
Further explanationIn the redox reaction, it is also known
Reducing agents are substances that experience oxidation
Oxidizing agents are substances that experience reduction
The metal activity series is expressed in voltaic series
Li-K-Ba-Ca-Na-Mg-Al-Mn- (H2O) -Zn-Cr-Fe-Cd-Co-Ni-Sn-Pb- (H) -Cu-Hg-Ag-Pt-Au
The more to the left, the metal is more reactive (easily release electrons) and the stronger reducing agent
The more to the right, the metal is less reactive (harder to release electrons) and the stronger oxidizing agent
So that the metal located on the left can push the metal on the right in the redox reaction
The electrodes which are easier to reduce than hydrogen (H), have E cells = +
The electrodes which are easier to oxidize than hydrogen have a sign E cell = -
So the above metals or metal ions will reduce Pb²⁺ (aq) will be located to the left of the Pb in the voltaic series or which have a more negative E cell value (greater reduction power)
The metal : d. Fe(s) and Al(s)
What volume of 3.00 M HCl in liters is needed to react completely (with nothing left over) with 0.750 L of 0.100 M Na2CO3?
Answer:
0.0500L of 3.00M HCl are needed to react completely
Explanation:
Hydrochloric acid HCl reacts with sodium carbonate, Na2CO3, as follows:
2HCl + Na₂CO₃ → 2NaCl + H₂O + CO₂
Where 2 moles of HCl reacts per mole of Na₂CO₃
To find the volume of 3.00M HCl needed to react completely we need first to calculate the moles of Na₂CO₃ added and, with this chemical equation we can solve for moles of HCl as follows:
Moles Na₂CO₃:
0.750L * (0.100moles Na₂CO₃ / L) = 0.0750moles
Moles HCl:
0.0750moles Na₂CO₃ * (2 moles HCl / 1 mole of Na₂CO₃) = 0.150 moles of HCl
Volume of 3.00M HCl:
0.150 moles of HCl * (1L / 3.00moles) =
0.0500L of 3.00M HCl are needed to react completelyIn which unit is the wavelength of an electromagnetic wave commonly measured?
A. J
B. nm
C. s-1
D. kg
Answer:
nm
Explanation:
trust me:)
