Compare and contrast the quantum mechanical model and Niels Bohr of the atom

Answer:

C. By super-cooling certain types of plasma.

Explanation:

Bose-Einstein condensate is a state of matter whereby atoms or particles become cooled to a very low energy state leading to their condensation to give a single quantum state.

Note that plasma refers to atoms that have had some or even all of its electrons stripped away leaving only positively charged ions. Simply put, plasma is ionized matter.

When certain types of plasma are super cooled, Bose-Einstein condensate are formed.

Answer:

[tex][O_2]_{eq}=0.030M[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to solve this problem by firstly writing out the mathematical expression for the concentration of oxygen at equilibrium, given the initial one and the change due to the reaction extent:

[tex][O_2]_{eq}=0.050M-x[/tex]

Whereas [tex]x[/tex] can be found considering the equilibrium of SO3:

[tex][SO_3]_{eq}=2x=0.040M[/tex]

Which means:

[tex]x=\frac{0.040M}{2} =0.020M[/tex]

Thus, the equilibrium concentration of oxygen gas turns out:

[tex][O_2]_{eq}=0.050M-0.020M=0.030M[/tex]

Regards!

Answer:

- Two black balls: they represent a diatomic molecule composed by two atoms of the same element.

- One black ball and two black balls: they represent a compound formed by two different elements.

- One gray ball and two black balls: they represent a compound formed by two different elements.

- Two black-dotted balls: they represent a diatomic molecule composed by two atoms of the same element.

Explanation:

Hey there!

In this case, according to the given information, we can firstly bear to mind the fact that each ball color represents a different element, for that reason we can tell the following:

- Two black balls: they represent a diatomic molecule composed by two atoms of the same element.

- One black ball and two black balls: they represent a compound formed by two different elements.

- One gray ball and two black balls: they represent a compound formed by two different elements.

- Two black-dotted balls: they represent a diatomic molecule composed by two atoms of the same element.

Regards!

Answer:

Magnesium - Metallic lattice

Nitrogen - Molecules

Lithium - Metallic lattice

Potassium - Metallic lattice

Explanation:

Metals exist in metallic lattices. In this lattice, metal ions are held together with a sea of electrons by strong electrostatic forces.

All metals possess this metallic lattice, hence; potassium, lithium and magnesium all consist of metal lattices.

Nitrogen is a nonmetal and consists of molecules of N2.

Answer:

0.17 g

Explanation:

Since the volume of gas collected is 132 mL, we need to find the number of moles of gas present in 132 mL.

So, number of moles, n = volume of gas, v/molar volume, V

n = v/V where v = 132 mL = 0.132 L and V = 22.4 L

So, substituting the values of the variables into the equation, we have

n = v/V

n = 0.132 L/22.4 L

n = 0.005893 mol

We then need to calculate the molar mass of CO, M = atomic mass of carbon + atomic mass of oxygen = 12 g/mol + 16 g/mol = 28 g/mol

Also, number of moles of gas, n = m/M where m = mass of CO and M = molar mass of CO

m = nM

m = 0.005893 mol × 28 g/mol

m = 0.165004 g

m ≅ 0.17 g to 2 significant digits

Answer:

1. Participating in calcium homeostatis storage of calcium.

2. High capacity calcium (Ca) regulation and protection against herbivory

[tex]\large \boxed{\sf 2 \: functions \: of \: crystals \: are :- } [/tex]

_________________

⟹

[tex] \sf \: \underline{ Calcium \: oxalate \: (CaOx) \: crystals} \: are \: distributed \: \\\sf among \: all \: taxonomic \: levels \\ \sf\: of \: photosynthetic \: organisms \: from \\ \sf \: small \: algae \: to \: angiosperms \: and \: giant \: gymnosperms .[/tex]

__________________

⟹

[tex]\sf Bone \: is \: mostly \: made \: of \: \underline{mineral \: crystals} \: \\ \sf and \: the \: protein \: collagen. \: The \: mineral  \: crystals \: bone  \\ \sf\: provide \: strength \: and \: rigidity \: for \: the \: matrix \: upon \: \\ \sf \: and \: within \: which \: they \: are \: deposited.[/tex]

Answer:

41 g

Explanation:

The equation of the reaction is;

Cr(NO3)3(aq)+Na3PO4(aq)=3NaNO3(s)+CrPO4(aq)

Number of moles of chromium nitrate = 37g/ 146.97 g/mol = 0.25 moles

1 mole of sodium phosphate reacts with 1 mole of chromium nitrate

x moles of sodium phosphate react as with 0.25 moles of chromium nitrate

x= 1 × 0.25/1

x= 0.25 moles

Mass of sodium phosphate = 0.25 moles × 163.94 g/mol

Mass of sodium phosphate = 41 g

Ethane consists of 6C−H bonds and 1C−C bond. Total number of bonds is 7. Each bond is made up of two electrons

#BRAINLEST LOVE❣️

Answer:

See explanation

Explanation:

a) The balanced reaction equation is;

Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH + PbCO3

b) When we include states of matter;

Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH(aq) + PbCO3 (s)

c) Complete ionic equation;

2Na^+(aq) + CO3^2-(aq) + Pb^2+(aq) + 2OH^-(aq) ----> 2Na^+(aq) + 2OH^-(aq) + PbCO3(s)

Net Ionic equation;

Pb^2+(aq) + CO3^2-(aq) ----> PbCO3(s)

Answer:

1s22s22p6

Explanation:

Neon is an element in the periodic table and has an atomic number of 10, which means it has 10 protons in its nucleus and thus since the number of protons and electrons is the same then it has 10 electrons.

Therefore, it has 2 electrons in the first energy shell and 8 electrons in the second energy shell. To elaborate further, the first shell has a single s-sub shell that contains a single s-orbital that can hold two electrons. The second energy shell has a single s-sub-shell whose s-orbital will occupy 2 electrons, and also has a p-orbital which can hold 6 electrons, making the second shell to have 8 electrons.

Answer:

3.00 L

Explanation:

P₁V₁ = P₂V₂

V₁ = 1.00 L

P₁ = (x) atm

P₂ = [tex]\frac{1}{3}[/tex] · (P₁) = [tex]\frac{x}{3}[/tex]

V₂ = unknown

(x atm)(1.00 L) = ( [tex]\frac{x}{3}[/tex] atm)(V₂)

divide both sides by ( [tex]\frac{x}{3}[/tex] atm)

( 1.00x )( [tex]\frac{3}{x}[/tex] ) = V₂

x cancels out

(1.00)(3) = V₂

V₂ = 3.00 L

endothermic absorbs heat

exothermic gives heat

a. endothermic

b. exothermic

c. endothermic

d. exothermic

a. Ice melting - endothermic

b. Water condensing on the surface - exothermic

c. Baking a cake - endothermic

d. The chemical reaction inside an instant cold pack - endothermic

e. A car using gasoline - exothermic

An exothermic reaction can be described as a thermodynamic chemical reaction that emits energy from the system to its surroundings usually in the form of light, heat, or sound.

While an endothermic reaction can be described as an opposite of an exothermic reaction where the energy gains in the form of heat. In exothermic chemical reactions, the bond energy is transformed into thermal energy.

In exothermic reactions, the reaction happens the form of the kinetic energy of molecules when the energy is released. The release of energy is due to the electronic transition of electrons from one energy level to another.

The burning of gasoline, and water condensation is also an exothermic reaction in which energy is released while ice melting and baking cake is an endothermic reaction.

Learn more about the exothermic process, here:

brainly.com/question/12321421

#SPJ5

Answer:

The correct answer is - 2.557 KJ

Explanation:

In this case, Hg is melting, the process is endothermic, so the energy change will have a positive sign.

we can calculate this energy by the following formula:

Q = met

where, m = mass,

e = specific heat

t = temperature

then,

Q = 78*0.14* (273-38.8)

here 0.14 = C(Hg)

= 2.557 Kj

Answer: Chemicals like acids and bases are harmful and must be neutralized before draining.

Explanation:

A strong acid or strong base is required to be diluted or neutralized before it is discarded in the drain as if is discarded without diluting and neutralization it can spill and splash from sink or drain and can harm people in chemistry lab, moreover the fumes of the discarded chemical on spilling can cause respiratory tract burning and can even cause fire hazard so it must be converted into less harmful form and then must be drained.  

Answer:

the composition of the ∝ phase C∝ = 14  or [ 14 wt% B-86 wt% A ]

Explanation:

Given the data in the question;

Co = 53 or [ 53 wt% B-47 wt% A ]

W∝ = 0.5 = Wβ

Cβ = 92 or [ 92 wt% B-8 wt% A ]

Now, lets set up the Lever rule for W∝ as follows;

W∝ = [ Cβ - Co ] / [ Cβ - C∝ ]

so we substitute our given values into the expression;

0.5 = [ 92 - 53 ] / [ 92 - C∝ ]

0.5 = 39 /  [ 92 - C∝ ]

0.5[ 92 - C∝ ] = 39

46 - 0.5C∝  = 39

0.5C∝ = 46 - 39

0.5C∝ = 7

C∝ = 7 / 0.5

C∝ = 14  or [ 14 wt% B-86 wt% A ]

Therefore, the composition of the ∝ phase C∝ = 14  or [ 14 wt% B-86 wt% A ]

Answer:

0.92g/mL

Explanation:

Density of a substance is calculated as follows:

Density = mass (m) ÷ volume (V)

According to this question, a rectangular piece of plastic has a width of 4.2 cm, a height of 1.9 cm and a length of 8.8 cm. Using the formula; L × W × H, the volume of the plastic can be calculated

V = L × W × H

V = 8.8 × 4.2 × 1.9

V = 70.2cm³

The mass of the plastic is 64.6g, hence, its density is:

Density = 64.6g ÷ 70.2cm³

Density of the rectangular plastic = 0.92g/cm³ or 0.92g/mL

Answer:

1.) Propanone (ketone)

2.) Ethanal( aldehyde)

3.) 3-phenyl-2-propenal (aldehyde)

4.) Butanone (ketone)

5.) Ethanol ( alcohol)

6.) 2-propanol (alcohol)

Explanation:

In organic chemistry, ALCOHOL ( also known as alkanol) are compounds in which hydroxyl groups are linked to alkyl groups. They can be considered as being derived from the corresponding alkanes by replacing the hydrogen atoms with hydroxyl groups. The hydroxyl group is the functional group of the alcohol as it is responsible for their characteristic chemical properties. A typical example of alcohol is ethanol and 2-propanol.

Alkanals or ALDEHYDES have the general formula RCHO while alkanones or KETONES have the general formula RR'CO where R and R' may be alkyl or aryl groups. The main similarity between these two classes of compounds is the presence of the carbonyl group. In aldehydes, there is a hydrogen atom attached to the carbon In the carbonyl group while there is none on the ketones.

Some common examples of ketones are Propanone, Butanone while examples of aldehydes are Ethanal and 3-phenyl-2-propenal

Answer:

10.71%

Explanation:

The dissociation of acetic acid can be well expressed as follow:

CH₃COOH ⇄   CH₃COO⁻  + H⁺

Let assume that the prepared amount of the aqueous solution is 14mM since it is not given:

Then:

The I.C.E Table is expressed as follows:

                     CH₃COOH       ⇄   CH₃COO⁻        +           H⁺  

Initial              0.0014                       0                                0

Change            - x                           +x                               +x

Equilibrium   (0.0014 - x)                 x                                 x

Recall that:

Ka for acetic acid CH₃COOH  = 1.8×10⁻⁵

∴

[tex]K_a = \dfrac{[x][x]]}{[0.0014-x]}[/tex]

[tex]1.8*10^{-5} = \dfrac{[x][x]]}{[0.0014-x]}[/tex]

[tex]1.8*10^{-5} = \dfrac{[x]^2}{[0.0014-x]}[/tex]

[tex]1.8*10^{-5}(0.0014-x) = x^2[/tex]

[tex]2.52*10^{-8} -1.8*10^{-5}x = x^2[/tex]

[tex]2.52*10^{-8} -1.8*10^{-5}x - x^2 =0[/tex]

By rearrangement:

[tex]- x^2 -1.8*10^{-5}x +2.52*10^{-8}= 0[/tex]

Multiplying through  by (-) and solving the quadratic equation:

[tex]x^2 +1.8*10^{-5}x-2.52*10^{-8}= 0[/tex]

[tex](-0.00015 + x) (0.000168 + x) =0[/tex]

x = 0.00015 or x = -0.000168

We will only consider the positive value;

so x=[CH₃COO⁻] = [H⁺] = 0.00015

CH₃COOH = (0.0014 - 0.00015) = 0.00125

However, the percentage fraction of the dissociated acetic acid is:

[tex]= \dfrac{ 0.00015}{0.0014}\times 100[/tex]

= 10.71%

Answer:

density of second liquid = 650 kg/m³

Explanation:

Given that:

The volume of the plastic block submerged inside the water  = 0.5 V

The force on the plastic block  = [tex]\rho_1V_1g[/tex]

[tex]= 0.5p_1 V_g[/tex]

when the block is floating, the weight supporting the force (buoyancy force) is:

W [tex]= 0.5p_1 V_g[/tex]

[tex]\rho Vg = 0.5p_1 V_g[/tex]

[tex]\rho = 0.5 \rho _1[/tex]

where;

water density [tex]\rho _1[/tex] = 1000

[tex]\rho = 0.5 (1000)[/tex]

[tex]\rho = 500 kg/m^3[/tex]

In the second liquid, the volume of plastic block in the water = (100-23)%

= 77% = 0.7 V

The force on the plastic block is:

[tex]= 0.77p_2 V_g[/tex]

when the block is floating, the weight supporting the force (buoyancy force) is:

[tex]W = 0.77p_2 V_g[/tex]

[tex]\rho Vg = 0.77 \rho_2 V_g \\ \\ \rho = 0.77 \rho_2 \\ \\ 500 = 0.77 \rho_2 \\ \\ \rho_2 = 500/0.77[/tex]

[tex]\mathbf{ \rho_2 \simeq 650 \ kg/m^3}[/tex]

Answer:

There are strong intermolecular forces between particles that make up liquids, but not gases.

Explanation:

Solids, liquids and gases are the three states of matter that exists. However, they possess varying properties that distinguishes them from one another. One of these properties is the strength of the intermolecular forces that hold their molecules together.

The intermolecular forces of each state of matter becomes weak in this order: solid>liquid>gas.

- Intermolecular forces in solid molecules are very strong, hence making them compact and well attached to each other.

- Intermolecular forces in liquid molecules are not too strong, hence, cannot exist in a fixed position but tend to flow.

- Intermolecular forces in gaseous molecules are very weak, hence, gases can move easily and rapidly in any given space.

Answer:

0 J

Explanation:

Applying,

ΔE = q+w................ Equation 1

Where ΔE = change in internal energy of the system, q = Heat of the system, w = work of the system.

Note: q is positive, while w is negative

From the question,

Given: q = 425 J, w = -425 J

Substitute these values into equation 1

ΔE = 425-425

ΔE = 0 J

Hence the change in internal energy of the system is 0 J

Answer:

O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e

Explanation:

An oxidation reaction reaction refers to a reaction in which electrons are lost. In this case, we are about to see the full balanced half-reaction for the oxidation of liquid water to aqueous hydrogen peroxide in basic aqueous solution.

The full equation is;

O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e

So, two electrons were lost in the process.

Answer:

a. 2..86 b. 4.86 c. 10.7 d. 8.7

Explanation:

a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA]

where [A⁻] = concentration of conjugate base (or charged form) and [HA] = concentration of acid.

At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1

So, pH = pKa + log[A⁻]/[HA]

pH = pKa + log1

pH = pKa = 2.86

b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.

Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.99x while the acidic concentration is remaining 1 % (1 - 0.99)x = 0.01x

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base (or charged form) = 0.99x and [HA] = concentration of acid = 0.01x.

pH = pKa + log0.99x/0.01x

pH = pKa + log0.99/0.01

pH = 2.86 + log99

pH = 2.86 + 1.996

pH = 4.856

pH ≅ 4.86

c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA]

where [A⁻] = concentration of conjugate base and [HA] = concentration of acid.

At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1

So, pH = pKa + log[A⁻]/[HA]

pH = pKa + log1

pH = pKa = 10.7

d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.

Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.01x while the acidic concentration is remaining 99 % (1 - 0.01)x = 0.99x (which possesses the charge).

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base = 0.01x and [HA] = concentration of acid = 0.99x.

pH = pKa + log0.01x/0.99x

pH = pKa + log1/99

pH = 10.7 - log99

pH = 10.7 - 1.996

pH = 8.704

pH ≅ 8.7

Answer:

Option e.

Explanation:

Molarity is the concentration that indicates moles of solute in 1 L of solution.

We have another concentration, percent by mass.

Percent by mass indicates mass of solute in 100 g of solution.

Our solute is HNO₃, our solvent is water.

17.5 g of nitric acid is the mass of solute. We can convert them to moles:

17.5 g . 1mol / 63g = 0.278 moles

We do not have volume of solution. We assume the mass is 100 g because the percent by mass but we need density to state the volume.

Density = Mass / Volume

Mass / Density = Volume

Once we have the volume, we need to be sure the units is in L, to determine molarity

M = mol /L

Answer:

pH= 1.9 then [tex]H_{3} PO_{4}[/tex]

pH = 5.0 , [tex]CH_{3} COOH[/tex]

pH = 3.9 , HCOOH

As we know range left [tex]pH= pKa+/- 1[/tex]

Answer:

See explanation

Explanation:

The molecule IF5 possesses five I-F polar bonds. However, the presence of polar bonds does not automatically imply that the molecule will be polar.

The geometry of the molecule is very important in determining the polarity of a compound. Since IF5 has a lone pair of electrons, the molecule is bent and as such there is a permanent dipole moment created in the molecule thereby making IF5 polar in nature.

Answer:

Explanation:

this guy on brainly already did it:

Alleei

Virtuoso

4.8K answers

37.1M people helped

Answer :  The work done for path A and path B is -685.3 J and -478.1 J  respectively.

Explanation :

To calculate the work done for path A :

First we have to calculate the moles of the gas.

where,

= initial pressure of gas  = 2.57 atm

= initial volume of gas  = 3.42 L

n = moles of gas  = ?

R = gas constant = 0.0821 atm.L/mol.K

T = temperature of gas  = 298 K

Now put all the given values in the above formula, we get:

According to the question, this is the case of isothermal reversible expansion of gas.

As per first law of thermodynamic,

where,

= internal energy

q = heat

w = work done

As we know that, the term internal energy is the depend on the temperature and the process is isothermal that means at constant temperature.

So, at constant temperature the internal energy is equal to zero.

The expression used for work done will be,

where,

w = work done on the system = ?

n = number of moles of gas  = 0.359 mole

R = gas constant = 8.314 J/mole K

T = temperature of gas  = 298 K

= initial volume of gas  = 3.42 L

= final volume of gas  = 7.39 L

Now put all the given values in the above formula, we get :

Thus, the work done of path A is, -685.3 J

To calculate the work done for path B :

The formula used for isothermally irreversible expansion is :

where,

w = work done

= external pressure = 1.19 atm

= initial volume of gas = 3.42 L

= final volume of gas = 7.39 L

Now put all the given values in the above formula, we get :

Thus, the work done of path B is, -478.1 J

he says he doesnt know sorry