Compare the vertical and horizontal components of velocity for a ball launched at an angle on a level surface. How do the vertical and horizontal components of the ball's velocities change as it travels through the air?

Answers

Answer 1

Answer:

horizontal velocity remaing constan thorough out the motion but the vertical motion's velocity changes due to the gravity acting on it.

for everl 1 second the velocity decreases by 9.8 that is the gravity


Related Questions

The reservoir stores 6 500 000 m3 of water. The density of the water is 998 kg/m3. Calculate the mass of water in the reservoir. Give your answer in standard form.

Answers

Answer:

Mass = 64,870,000,000 kilograms

Explanation:

Given the following data;

Density = 998 kg/m³

Volume = 6,500,000 m³

To find the mass of water in the reservoir;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the equation;

Density = mass/volume

Making mass the subject of formula, we have;

Mass = density * volume

Mass = 998 * 6,500,000

Mass = 64,870,000,000 kilograms

A 25.0kg girl pushes a 50.0kg boy with a force of 100.0N. What is the acceleration of the girl?

Answers

Answer:

im pretty sure it should be 50.0

What do you think Jose’s grandmother meant by saying that the bread was too dense? What other things can you think of that are “dense”?

Answers

The bread was most likely heavy

Answer:

What I think that Jose's grandmother meant by saying that the bread was too dense is that she thinks the bread is too heavy or it can even mean to be too compacted in substance. The matter in the bread are close together and not spread out like in the air, when the matter in the air starts to come closer together it starts to make fog, because it is becoming more dense. Some more things that are heavy or dense are things like a big stereo speaker, an anvil, or even a big piece of wood used to build.

Explanation:

3. Thekinetic energy of an object of
mass, m moving with a velocity
of 5 ms-t is 25 J. What will be its
Toinetic energy when its velocity
is doubled? What will be its
Icinetic energy ruhen its velocity
is increased three times?​

Answers

Answer:

1. 100 J

2. 225 J

Explanation:

We'll begin by calculating the mass of the object. This can be obtained as follow:

Velocity (v) = 5 ms¯¹

Kinetic energy (KE) = 25 J

Mass (m) =?

KE = ½mv²

25 = ½ × m × 5²

25 = ½ × m × 25

25 = 25m / 2

Cross multiply

25m = 25 × 2

25m = 50

Divide both side by 25

m = 50 / 25

m = 2 Kg

1. Determination of the kinetic energy when the velocity is doubled.

Mass (m) = 2 Kg

Velocity (v) = double the initial velocity

= 2 × 5 ms¯¹

= 10 ms¯¹

Kinetic energy (KE) =?

KE = ½mv²

KE = ½ × 2 × 10²

KE = ½ × 2 × 100

KE = 100 J

2. Determination of the kinetic energy when the velocity increased three times.

Mass (m) = 2 Kg

Velocity (v) = three times the initial velocity

= 3 × 5 ms¯¹

= 15 ms¯¹

Kinetic energy (KE) =?

KE = ½mv²

KE = ½ × 2 × 15²

KE = ½ × 2 × 225

KE = 225 J

If the radius of curvature of a mirror is 15m and the distance of the object from the mirror is 10m. Find the distance of the image from the mirror and the magnification of the object in meter

Answers

Answer:

Data given.

focal length (f)=15m÷2=7.5m

Distance of the object(U)=10m

Image distance (v)=?

Magnification (M)=?

Solution:

From:

1/f=1/u+1/v

1/7.5=1/10+1/v=75

then v=75m

Magnification, M=u/v

=75/10=7.5

Then magnification=7.5

Answer:

v = 30 m and m = 3

Explanation:

Given that,

The radius of curvature of the mirror, R = 15 m

Focal length, f = 7.5 m

Object distance, u = -10 m

We need to find the image distance and the magnification of the object.

Using mirror's formula,

[tex]\dfrac{1}{v}-\dfrac{1}{u}=\dfrac{1}{f}\\\\\dfrac{1}{v}=\dfrac{1}{f}+\dfrac{1}{u}\\\\\dfrac{1}{v}=\dfrac{1}{(7.5)}+\dfrac{1}{(-10)}\\\\v=30\ m[/tex]

The magnification of the object in mirror is given by :

[tex]m=\dfrac{-v}{u}\\\\m=\dfrac{-30}{-10}\\\\m=3[/tex]

So, the distance of the image from the mirror and the magnification of the object are 30 m and 3 respectively.

the unit of energy is same as that of work i.e joule give reason​

Answers

"Energy" is the ability to do work.

"Work" is the process of using energy.

Which describes an atom that has fewer neutrons than protons and more electrons than protons?

negative compound
positive compound
positive ion
negative ion

Answers

Answer:

Negative ion

.................

Negative Ion

An atom has fewer neutrons than protons and more electrons than protons is a negative ion

The picture below shows a person swinging a yo-yo in a circle. Which vector shows the velocity of the yo-yo at this moment?
A. B
B. A
C. C
D. D

Answers

C, at this moment it is directly 90 degrees to the right and is only travelling downwards

A student sects a leaf of length 7.2 cm to draw. Her drawing is 28.8 cm in length. What is the magnification of the drawing?
a) x4
b) x207.36
c) x0.25
d) x36

Answers

Answer:

A) x4

Explanation:

Magnification is equal to image size divided by the actual size, or M = I/A.

The image size is the student's drawing, which is 28.8 cm, and the actual size is 7.2 cm. Divide them, and cancel out the units, and you should get:

28.8 cm/7.2 cm = 4

How much current flows in the circuit if two resistors of 6 connected in parallel are
supplied with potential difference of 12 volts?​

Answers

Answer:

4 A

Explanation:

Firstly we need to calculate the equivalent resistance. Since, two resistors of 6 connected in parallel, so equivalent resistance will be given by,

[tex]\longrightarrow[/tex] 1/R = 1/R1 + 1/R2

[tex]\longrightarrow[/tex] 1/R = (1/6 + 1/6) Ω

[tex]\longrightarrow[/tex] 1/R = (1 + 1)/6 Ω

[tex]\longrightarrow[/tex] 1/R = 2/6 Ω

[tex]\longrightarrow[/tex] R = 6/2 Ω

[tex]\longrightarrow[/tex] R = 3 Ω

We know that,

[tex]\longrightarrow[/tex] V = IR

V denotes p.d (12V)I denotes currentR denotes resistance (3 Ω)

[tex]\longrightarrow[/tex] 12 = I × 3

[tex]\longrightarrow[/tex] 12 ÷ 3 = I

[tex]\longrightarrow[/tex] 4 Ampere = I

Does this equation show that transmutation has taken place during decay?
Why or why not?
Ni – S.Ni+y
A. No, because there is conservation of the number of atoms as well
as the number of nucleons.
B. No, because high-energy electromagnetic waves are emitted.
C. Yes, because the numbers of nucleons and atoms are conserved.
D. Yes, because nickel atoms remain nickel atoms with the same
number of neutrons.

Answers

Answer:

Maybe A is the correct answer

An amoeba has 1.00 x 1016 protons and a net charge of 0.300 pC. Assuming there are 1.88 x 106 fewer electrons than protons, If you paired them up, what fraction of the protons would have no electrons

Answers

Answer:

The fraction of the protons would have no electrons [tex]=1.88\times 10^{-10}[/tex]

Explanation:

We are given that

Amoeba has total number of protons=[tex]1.00\times 10^{16}[/tex]

Net charge, Q=0.300pC

Electrons are fewer than protons=[tex]1.88\times 10^6[/tex]

We have to find the fraction of protons would have no electrons.

The fraction of the protons would have no electrons

=[tex]\frac{Fewer\;electrons}{Total\;protons}[/tex]

The fraction of the protons would have no electrons

=[tex]\frac{1.88\times 10^{6}}{1.00\times 10^{16}}[/tex]

[tex]=1.88\times 10^{-10}[/tex]

Hence, the fraction of the protons would have no electrons [tex]=1.88\times 10^{-10}[/tex]

an object that has lost its electrons become?​

Answers

Answer: A positively charged ion/ cation

Explanation: When an atom loses all of its electrons, it becomes a positively charged ion. Also referred to as the cation, the object will have a shortage of electrons, leading to a positive charge. Keep in mind that an atom will become positive if it loses electrons, and will become negative if it gains electrons.


Hope this helps! Comment below for more questions.

A gas is enclosed in a confainer fitted with a piston of cross sectional area 0.10 the pressureof the gas is maintained in 8000 when hat is slowlh transferred the piston is pushed up through a distance of 4.0cm If 42j of heat is transferred to the system during expansion wht is the change im internal energy of th system

Answers

Answer:

10 Joule

Explanation:

The solution and answer are well written in the Pic above.

A pair of forces with equal magnitude, opposite directions, and different lines of action is called a "couple." When a couple acts on a rigid object, the couple produces a torque that does not depend on the location of the axis. The drawing shows a couple acting on a tire wrench, each force being perpendicular to the wrench. Determine an expression for the torque produced by the couple when the axis is perpendicular to the tire and passes through the following. Express your answers in terms of the magnitude F of the force and the length L of the wrench.

Answers

The drawing shows the couple acting on a tire wrench is missing and so i have attached it.

We are to find an expression for the torque when the axis is perpendicular to the tire and passes through the points A, B & C

Answer:

Point A: τ = Fl

Point B: τ = 0

Point C: - Fl

Explanation:

Formula for torque is;

τ = F × d

Where;

F is perpendicular force

d is distance.

Thus;

> At point A, it means we are taking torque about point A and so we have;

τ = (-F × 0) + (F × L)

τ = Fl

> At point B, it means we are taking torque about point B and so we have;

τ = (-F × L/2) + (F × L/2)

τ = -(FL/2) + (FL/2)

τ = 0

> At point C, it means we are taking torque about point C and so we have;

τ = (-F × L) + (F × 0)

τ = -FL

Naomi Osaka, a Japanese-African-American tennis player is the 2021 Australian Open Champion, and the first Asian tennis player in Women's Tennis Association (WTA) history to be ranked first in Singles. To celebrate her win, Naomi Osaka hits a ball into the stands at 40. m/s and at an angle 30.° above the horizontal. On its way down, the ball is caught by a spectator 12 m above the point where the ball was hit.

a) Calculate the time it takes the tennis ball to reach the spectator.

b) Calculate the ball's horizontal range (horizontal distance travelled).

Answers

Answer:

(a) t = 0.75 s

(b) d = 26 m

Explanation:

Height, h = 12 m

Angle, A = 30 degree

initial velocity, u = 40 m/s

(a) Let the time is t.

Use second equation of motion

 [tex]h = u t + 0.5 at^2\\\\12 = 40 sin 30 t - 0.5 \times10 \times t^2\\\\12 = 20 t - 5 t^2\\\\5 t^2 - 20 t + 12 =0 \\\\t = \frac{20\pm \sqrt{400-240}}{10}\\\\t = \frac{20\pm 12.65}{10}\\\\t = 3.3 s, 0.75 s[/tex]

(b) d = u cos A t

d = 40 x cos 30 x 0.75 = 26 m

A ball is thrown vertically upward. As it rises, what happens to its potential energy?​

Answers

Answer:

Explanation:

As the ball rises, its PE increases because the potential energy is equal to the mass of the ball times gravity times the height of the ball. The higher the height, the higher the PE.

Answer:

According to the law of conservation of energy its kinetic energy is getting converted in to potential energy because of gain in height. So, if the velocity of a ball goes on decreasing when it is thrown vertically upwards. When its velocity becomes zero, its potential energy becomes maximum.

Imagine you see Mars rising in the east at 6:30 pm. Six hours later what direction would you face (look) to see Mars when it is highest in the sky

Answers

Answer:

The Mars appears in the direction of South.

Explanation:

Mars is rising in the east at 6: 30 PM. The period of rotation of earth is 24 hours.

So, 6 hours is the one fourth of the period of rotation of earth. Earth rotates counter clockwise on its axis, so after 6 hours, we see the Mars in the direction of South.

This question is divided into two parts. This is part (a) of the question. A proton accelerates from rest in a uniform electric field of 580 N/C. At some later time, its speed is 1.00 x 106 m/s. (a) Find the magnitude of the acceleration of the proton. (Mass of the proton is 1.67 x 10-27 kg and charge is 1.60 x 10-19 C) (in the following options 10^10 m/s^2 is 1010 m/s2)

Answers

Answer:

The acceleration of proton is 5.56 x 10^10 m/s^2 .

Explanation:

initial velocity, u = 0

Electric field, E = 580 N/C

final speed, v = 10^6 m/s

(a) Let the acceleration is a.

According to the Newton's second law

F = m a = q E

where, q is the charge of proton and m is the mass.

[tex]a= \frac{q E}{m}\\\\a = \frac{1.6\times10^{-19}\times 580}{1.67\times 10^{-27}}\\\\a= 5.56\times 10^{10} m/s^2[/tex]

A bicycle and a car start their journey at the same time the cyclist reaches it's top speed of 10mls in 15 the car reaches a speed if 15 MLS in55 which has the greater acceleration the car or the bicycle

Answers

Complete question is;

A bicycle and a car start their journey at the same time the cyclist reaches it's top speed of 10m/s in 15 s, the car reaches a speed of 15 m/s in 55 s. which has the greater acceleration the car or the bicycle.

Answer:

The bicycle has the greater acceleration.

Explanation:

Cyclist reaches a top speed of 10m/s in 15 s.

Formula for acceleration here is;

a = v/t

a = 10/15

a = 0.67 m/s²

Car reaches a speed of 15 m/s in 55 s.

Thus;

a = 15/55

a = 0.27 m/s²

From the 2 acceleration values gotten, we can say that;

The bicycle has the greater acceleration.

A piano string of density 0.0050 kg/m is under a tension of 1,350 N. Find the velocity with which a wave travels on the string.

Answers

Answer:

519.62 m/s

Explanation:

Applying,

v = √(T/m').............. Equation 1

Where v = velocity of the wave, T = Tension on the string, m' = mass per unit length of the string

From the question,

Given: T = 1350 N, m' = 0.005 kg/m

Substitute these values into equation 1

v = √(1350/0.005)

v = √(270000)

v = 519.62 m/s

What is the enthalpy change, AH, for this reaction? Show your work to receive full credit. URGENT PICTURE INCLUDED !!!

Answers

Answer:

150 kJ

Explanation:

Applying,

ΔH = Energy level of Product(E') - Energy level of reactant(E)

Where ΔH = enthalpy change, E' and E = energy level of the product and the reactant respectively

ΔH = E'-E............. Equation 1

From the diagram,

Given: E' = 200 kJ, E = 50 kJ

Substitute these values into equation 1

ΔH = 200-50

ΔH = 150 kJ

Hence the enthalpy change for the reaction is 150 kJ

What happens to the electric force between two particles if the distance
between them is doubled?
A. It decreases to half the original force.
B. It increases to twice the original force.
C. It increases to 4 times the original force.
D. It decreases to 1/4 of the original force.

Answers

Answer:

D.

Explanation:

Force and distance are inversely related, so a greater distance results in a weaker force.

why does a desert cooler cool better than a hot dry day​

Answers

On a hot dry day, the amount of water vapour present in atmosphere is less. Thus, water present inside the desert cooler evaporates more, thereby cooling the surroundings more. Hence, a desert cooler cools better on a hot dry day.

Two parallel conducting plates are separated by 12.0 cm, and one of them is taken to be at zero volts. (a) What is the magnitude of the electric field strength between them, if the potential 5.6 cm from the zero volt plate is 450 V

Answers

Answer:

-8.036 kV/m

Explanation:

The electric field E = -ΔV/Δx where ΔV = change in electric potential = V - V' where V = electric potential at x = 5.6 cm =  450 V and V' = electric potential at x = 0 cm, = 0 V . So, ΔV = V - V' = 450 V - 0 V = 450 V.

Δx = distance between the 0 V plate and the 450 V point = 5.6 cm = 0.056 m

So, E = -ΔV/Δx

Substituting the values of the variables into the equation, we have

E = -ΔV/Δx

E = -450 V/0.056 m

E = -8035.7 V/m

E = -8.0357 kV/m

E ≅ -8.036 kV/m

Since the electric field between two parallel conducting plates is constant, the electric field between the plates is E = -8.036 kV/m

What is displacement?
An objects overall change in position
The total measure of how far one travels
a change in direction

Answers

Answer:

An object overall change in position

Explanation:

ans maybe corre6

Select the correct answer. The motion of a car on a position-time graph is represented with a horizontal line. What does this indicate about the car’s motion? A. It’s not moving. B. It’s moving at a constant speed. C. It’s moving at a constant velocity. D. It’s speeding up.

Answers

If the car's motion appears as a horizontal line on a position-time graph, it shows that as time changes, the car's position doesn't change.

This is just a complicated way to say that the car is not moving. (A)

Answer: It's not moving.

Explanation:

I got it correct on edmentum.

What kind of waves are present during an earthquake?​

Answers

Body Waves - Primary (P) & Secondary (S) Waves.
Surface Waves - Rayleigh & Love Waves.

Answer:

There are four main types of earthquake waves:

P-waves S-waves (which are body waves), Rayleigh waves Love waves (which are surface waves).

HOPE IT HELPS!!

what are MA and VR of a lever?​

Answers

Explanation:

Mechanical advantage (MA) = Load/Effort. Velocity ratio (VR) = distance effort moves/ distance load moves in the same time


[tex]what \: is \: reflection \: of \: light \: \: \: \: {?}[/tex]

Answers

Answer:

When a ray of light approaches a smooth polished surface and the light ray bounces back, it is called the reflection of light. The incident light ray which lands upon the surface is said to be reflected off the surface. The ray that bounces back is called the reflected ray.

Other Questions
Which political leader was among the individuals who led the Second Crusade A. Conrad |||B. Philip Augusts C. Godfrey de Bouillon D. Richard the Lionheart pls hurry Warm-Up Type your response in the box. Imagine what it would be like if you and your family had to leave your home and live in a camp. Make a list of all of the activities you enjoy now that you would have to give up, such as going to the movies or playing at a friend's house. The formal charge and P-O bond order in PO43- respectively are 0.6, -0.75 -0.75, 1.25 1.0, -0.75 1.25, -3 98. simplify 3[(15-3)^2 + 4] Describe fully the single transformation that maps triangle A onto triangle B fungsi vakuol mengecut dalam paramecium Which EEG waves may appear transiently during sleep in normal adults but are most often observed in children and in intensely frustrated adults Find xHelp me please The time between surface finish problems in a galvanizing process is exponentially distributed with a mean of 41 hours. A single plant operates three galvanizing lines that are assumed to operate independently. Round your answers to four decimal places (e.g. 98.7654).(a) What is the probability that none of the lines experiences a surface finish problem in 41 hours of operation?(b) What is the probability that all three lines experience a surface finish problem between 24 and 41 hours of operation? what was life like for great plains villagers?help me pleaseeee Mention one reason why south africans need to help those affected by gender based violence 3x6+(1)need answer pls You work at Happy Joe's family restaurant and want to see if customer meal satisfaction and gender are related to one another. You take a sample of customers and ask them if they were satisfied with their meal and note their gender. To determine if Satisfaction and Gender are dependent, what are the appropriate hypotheses Is the product of two prime numbers a prime number or a composite number? difference between action potential of sa node and contractile myocytes The sum of four consecutive odd integers is 72. Write an equation to model this situation, and find the values of the four integers. Why do all proteins given a negative charge prior to electrophoresis? We know that 1 1 r = [infinity] n = 0 rn has interval of convergence (1, 1). This means the series converges for |r| < 1. Therefore, the series f(x) = 1 2 + x = [infinity] n = 0 (1)n xn 2n + 1 will converge when x 2 < 1. Thus, what is the interval of convergence for f(x)? (Enter your answer using interval notation.) The angle of elevation of the top of the tower from a point on the ground is 30 degree, If the height of the tower is 40 space m e t e r s, then the distance between the tower and the point is describe five ways in which contract management might adds value after the contract award stage of the sourcing process.