Complete the table by writing the name or formula of each compound and the type of bonding that it uses. You may refer to this list of polyatomic ions.

Hydrogen bonding is a special type of dipole-dipole attraction between molecules, not a covalent bond to a hydrogen atom. It results from the attractive force between a hydrogen atom covalently bonded to a very electronegative atom such as a N, O, or F atom and another very electronegative atom.

Answer:

Chemical reaction, a process in which one or more substances, the reactants, are converted to one or more different substances, the products.

A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.

Chemical reactions are an integral part of technology, of culture, and indeed of life itself. Burning fuels, smelting iron, making glass and pottery, brewing beer, and making wine and cheese are among many examples of activities incorporating chemical reactions that have been known and used for thousands of years. Chemical reactions abound in the geology of Earth, in the atmosphere and oceans, and in a vast array of complicated processes that occur in all living systems.

Explanation:

hope it help

plss brainlys me

Answer:

Chemical reaction, a process in which one or more substances, the reactants, are converted to one or more different substances, the products

Explanation:

Substances are either chemical elements or compounds. A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.

Answer:

2.95 * 10^23 atoms

Explanation:

The number of atoms in a mole is always equal to Avogadro's constant, which is 6.02214076×10²³ mol⁻¹.

To find the number of atoms in 0.490 moles of barium, multiply it with Avogadro's constant:

0.490 mol * 6.02214076×10²³ mol⁻¹ ≈ 2.9508 * 10^23

Convert to SigFigs (if necessary):

2.95 * 10^23

(i) Liang - liang stoma lebih banyak di bahagian bawah daun berbanding di bahagian atas permukaan daun.

(ii) Struktur X berfungsi mangawal pembukaan dan penutupan liang stoma

A. build proteins

Explanation:

The endoplasmic reticulum can either be smooth or rough, and in general its function is to produce proteins for the rest of the cell to function. The rough endoplasmic reticulum has on it ribosomes, which are small, round organelles whose function it is to make those proteins

Answer:

i) During washing

ii) During Measurement

Explanation:

The two possible steps are :

i) During washing : during the washing method the residue may be not completely dried out and this residue ( water) will add up to the final product ( copper yield ) and this kind of error is called human error.

ii) During measurement : If the weighing instrument is faulty there might be addition  in value of the final copper yield which will see the final yield value > 100% . this error occurs when the initial value and final value is  been weighed

c) Current cannot flow

Reason: Because the switch is not closed.

Answer:

current can't flow

Explanation:

by the way of explanation it is open circuit in which the current flow whereas in closed circuit the current flow.

if you like my answer please mark as brainlist.

it will be too much help for me.

Answer:

He supported the ideology of Marxism.

He opposed the tsar and was exiled.

He led the Bolsheviks.

Explanation:

Lenin was Russian Revolution political theorist. He served as first founding head of government of Soviet Russia. He supported the ideology of Marxism and opposed Tsar.

Explanation:

A B C D isme koyi ans hain doond lo

The addition of any non-volatile solutes will elevate the boiling point of the solution. The change in boiling point of water by the addition of 2.10 of barium chloride is 0.0028 ° C. Hence, option A is correct.

Boiling point of a substance is the temperature at which it changes from liquid to vapour where the two states are in equilibrium. Boiling point of a substance depends on the bond type, molecular mass and purity of it.

The change or elevation of boiling point of a solution can be determined from its molality m and elevation constant Kb and the Van't Hoff factor i as follows:

ΔT = i Kb m.

Molality of the solution is the no.of moles divided by the mass of solvent in kilogram. Given the mass of barium chloride is 2.10 g and its molar mass is 208.23 g . The no.of moles of solute is 2.10/208.23 g = 0.0100.

Molality of the solution can be calculated as follows:

Molality m = 0.0100 / 5.50 Kg

                 = 0.0018 mol/kg.

Now, the  ΔT s calculated from these values. Provided Kb of water is 0.51 ° C /mol and i = 3.

ΔT  = 0.0018 mol/kg × 0.51 × 3

       = 0.0028 ° C.

Therefore, water will boil at 100.0028 ° C. Hence, option A is correct.

To find more about boiling point, refer the link below:

https://brainly.com/question/28203474

#SPJ1

Answer:

Weight = 500 Newton

Explanation:

Given the following data;

Acceleration due to gravity = 10N/Kg

Weight can be defined as the force acting on a body or an object as a result of gravity.

Mathematically, the weight of an object is given by the formula;

[tex] Weight = mg [/tex]

Where;

Note: In order to calculate the weight of a mass, it's required that the mass of an object or body is given.

However, in this particular question it was omitted in error and as such i would assume a value.

Substituting into the formula, we have;

[tex] Weight = 50 * 10 [/tex]

Weight = 500 Newton

Answer:

The more polar the molecules, the stronger the force. The more hydrogen in the molecule, the stronger the force.

Explanation:

I hope this helps and please ask if you need further help!

Answer:

The final temperature aluminium-water system is 24° C

Explanation:

Heat energy, H = mcθ

Where m is mass of substance, c is specific heat capacity, θ is temperature difference

Using the principle, Heat lost = Heat gained

Let the final temperature of the aluminium-water system be Tfinal

Heat lost by aluminium, H₁ = -m₁c₁(Tfinal - 40)

Heat gained by water, H₂ = m₂c₂(Tfinal -21)

Heat lost by aluminium, H = -[30 × 0.21 × (Tfinal - 40)]

H₁ = -6.3Tfinal + 252

Heat gained by water, H₂ = 50 × 1.0 × (Tfinal - 21)

H₂ = 5Tfinal - 21

Equating H₁ and H₂

-6.3Tfinal + 252 = 5 Tfinal - 21

5Tfinal + 6.3Ffinal = 252 + 21

11.3 Tfinal = 273

Tfinal = 273/11.3

Tfinal = 24° C

Therefore, the final temperature aluminium-water system is 24° C

The question is incomplete, the complete question is:

Standardization of a Borax solution (Na2B4O7). A student titrates a 20.00 mL sample of an aqueous borax solution with 1.044 M H2SO4. It takes 2.63 mL of acid to reach the equivalence point. Knowing it takes 1 H2SO4 to neutralize 2 Na2B4O7, what was the concentration of this Borax solution?

Answer: The concentration of borax solution is 0.069 M.

Explanation:

To calculate the concentration of borax solution, the formula used is:

[tex]n_1C_1V_1=n_2C_2V_2[/tex] ....(1)

where,

[tex]n_1, C_1\text{ and }V_1[/tex] are the n-factor, concentration and volume of sulfuric acid

[tex]n_2,C_2\text{ and }V_2[/tex] are the n-factor, concentration and volume of borax solution.

We are given:

[tex]n_1=1\\C_1=1.044M\\V_1=2.63mL\\n_2=2\\C_2=?M\\V_2=20mL[/tex]

Putting values in equation 1, we get:

[tex]1\times 1.044\times 2.63=2\times C_2\times 20\\\\C_2=\frac{1\times 1.044\times 2.63}{2\times 20}\\\\C_2=0.069M[/tex]

Hence, the concentration of borax solution is 0.069 M.

Answer:

C. Gravity only

Explanation:

Answer:

Atoms are single neutral particles. Molecules are neutral particles made of two or more atoms bonded together.

Explanation:

its on safari ??????????

Answer:

Hydrogen Chloride

Explanation:

They will be able to dissolve quicker than the rest

Answer:

C. Hydrogen chloride.

Explanation:

Hydrogen chloride gas will diffuse most quickly.

Answer:

SiH

Explanation:

The symbol for Silicon is Si, and the symbol for Hydrogen is H. There is no need for extra characters in the name.

Answer:

Aluminum; [Ne]3s²3p¹

Arsenic; [Ar]3d¹⁰4s²4p³

Explanation:

Aluminum

From the periodic table, we have that aluminum, Al, is located in period 3, and group 3A of the periodic table

Therefore, the noble gas that comes before aluminum in the periodic table is neon Ne

The electronic configuration of aluminum is 1s²2s²2p⁶3s²3p¹

The electronic configuration of neon is 1s²2s²2p⁶

Therefore, the electronic configuration of aluminum in noble gas notation (Ne) is therefore;

[Ne]3s²3p¹

Arsenic

Arsenic is located after argon, Ar on the periodic table

The electronic configuration of arsenic is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p³

The electronic configuration of argon is 1s²2s²2p⁶3s²3p⁶

The electronic configuration of arsenic in noble gas notation (Ar) is given as follows;

[Ar]3d¹⁰4s²4p³

Answer:

parietal pleura

Explanation:

The pleurae, which are serous membranes, divide the thoracic cavity's wall from the lungs. The parietal pleura covers the interior of the thorax, mediastinum, and diaphragm, while the visceral pleura covers the surface of the lungs.

The perianal pleura, the outer layer, is attached to the chest wall. The lungs, mediastinum's neurovascular structures, and bronchi are all covered by the inner layer (visceral pleura).

The pleura's role in breathing is to enable the lungs to expand and collapse as efficiently as possible.

The parietal and visceral pleura can move over one another without rubbing against one another thanks to the pleural fluid's lubricating properties. The pleural layers themselves produce this fluid.

Therefore, parietal pleura, which surround the lungs in thoracic cavity.

Learn more about parietal pleura here:

https://brainly.com/question/15247615

#SPJ2

Answer:

PCl5 <-> PCl3 + Cl2

PCl5 decomposes into PCl3 and Cl2 according to the equation above. A pure sample of Pcl5 is placed in a rigid, evacuated 1.00 L container. The initial pressure of the PCl5 is 1.00 atm. The temperature is held constant until the PCl5 reaches equilibrium with its decomposition products. The figures below show the initial and equilibrium conditions of the system.

As the reaction progresses toward equilibrium, the rate of the forward reaction

A) increases until it becomes the same as the reverse reaction rate at equilibrium

B) stays constant before and after equilibrium is reached

C) decreases to become a constant nonzero rate at equilibrium

D) decreases to become zero at equilibrium

Explanation:

At equilibrium, both forward and backward reactions take place with constant speed.

The reaction will never cease.

Due to this reason chemical equilibrium is called dynamic in nature.

At equilibrium:

the rate of forward reaction = rate of backward reaction

As the reaction progresses toward equilibrium, the rate of the forward reaction decreases to become a constant nonzero rate at equilibrium.

Answer is option C).

When a system is in a state of chemical equilibrium, neither the reactant concentration nor the product concentration changes over time, nor does the system exhibit any further changes in its attributes. Here the correct option is C.

The system reaches a condition of chemical equilibrium when the rate of the forward reaction equals the rate of the reverse reaction. The system is considered to be in a state of dynamic equilibrium when the concentrations of the reactants and products do not change further as a result of the equal rates of the forward and reverse processes.

Equilibrium is impacted by a number of variables, including temperature, pressure, and the system's concentration. Here at equilibrium the rate of the forward reaction decreases to become a constant nonzero rate at equilibrium.

Thus the correct option is C.

To know more about chemical equilibrium, visit;

https://brainly.com/question/4289021

#SPJ6

Answer:

A

Explanation:

because B is wrong as it doesn't have the same mass number. C is wrong as it has different number of neutrons. D is wrong as it has more neutrons than protons.

Answer:

d. the solution is a acid

Answer:D The solution is an acid

Explanation:The lower the pH of a substance the stronger the acidic level.

Answer: true

Asexual reproduction is the process by which an organism is produced from a single parent cell. There are four major forms of asexual reproduction - budding, binary fission, regeneration and parthenogenesis. ... Regeneration is a type of asexual reproduction in which the organism is capable of regrowing certain body parts.

Explanation:

id k what u r talking abt but hope this helps

Answer:

Some of the common impacts of earthquakes include structural damage to buildings, fires, damage to bridges and highways, initiation of slope failures, liquefaction, and tsunami.

Answer: The molality of [tex]NaC_2H_3O_2[/tex] solution is 0.782 m

Explanation:

Molality is defined as the amount of solute expressed in the number of moles present per kilogram of solvent. The units of molarity are mol/kg. The formula used to calculate molality:

[tex]\text{Molality of solution}=\frac{\text{Moles of solute}}{\text{Mass of solvent (in kg)}}[/tex] .....(1)

Given values:

Moles of [tex]NaC_2H_3O_2[/tex] = 0.395 mol

Mass of solvent (water) = 0.505 kg

Putting values in equation 1, we get:

[tex]\text{Molality of }NaC_2H_3O_2=\frac{0.395mol}{0.505kg}\\\\\text{Molality of }NaC_2H_3O_2=0.782m[/tex]

Hence, the molality of [tex]NaC_2H_3O_2[/tex] solution is 0.782 m

Answer:

The molecules of oxygen should be placed as reactants in the equation.

Explanation:

1:      N₂ + O₂ → 2NO

2:     2NO + O₂ → 2NO₂

complete reaction:

N₂ + 2O₂ → 2NO₂

We can not place oxygen at the side of products neither we can cancel it because, products can only be obtained at the end of the reaction but according to the equations' oxygen is not the end product of the reaction. But the addition into the reaction (Eq. 2) to make the new product.

Also, we can not cancel it because to cancel out molecules of oxygen should be present at the both sides with same amount in the stoichiometric equation.

Hence, in a balanced chemical equation, oxygen should be written as a reactant by using the correct number of moles.

Explanation:

Objectives and goals serve as a foundation for successful organizations since they establish the business's objective and aid in the identification of required measures. Goals are broad assertions of what you want to achieve, whereas goals are the precise stages or steps you need to take to get there.