Choose every kind of secondary bonding that these two molecules have. 2 metallic hydrogen bonding dipoles that are both momentarily induced.
There are three different forms of interactions between molecules that result in these attractive forces: Dipole interactions, hydrogen bonding interactions, and molecule-molecule interactions are the order in which they occur (London dispersion forces). Polar molecular bonding produces hydrogen bonds, the strongest type of secondary bonding. Choose every kind of secondary bonding that these two molecules have. 2 metallic hydrogen bonding dipoles that are both momentarily induced. These can develop in water or hydrogen fluorides, for instance. When the electrons in two nearby atoms hold positions that cause the atoms to temporarily form dipoles, the consequence is the London dispersion force, a transient attractive force. Unlike main bonds, secondary bonds have substantially lower bonding energies.
Learn more about molecules
https://brainly.com/question/21263612
#SPJ4
Please help with this:
Typically, hard water used in a lab class would have been prepared by adding 1 gram of
magnesium sulfate per liter of distilled water. Magnesium sulfate contains 20.2%
magnesium ions by mass. What is its hardness in grains per gallon (GPG)? (One GPG
equals 17.1 mg/L.)
One grain of calcium carbonate, or 64.8 milligrams, is dissolved in one US gallon of water to represent one grain per gallon (gpg), a measure of water hardness (3.785412 L).
What is Water Hardness Measurement Scales?Understanding your test findings necessitates familiarity with the many water hardness testing scales that are employed. The majority of results are provided as a number that indicates the amount of calcium carbonate or calcium carbonate equivalents present in a specific unit of water. Depending on the measurement method, this value may be given in grains per gallon (gpg), parts per million (ppm), or milligrammes per litre (mg/L).Per Gallon of Grains Measurement of water hardnessThe hardness scale, expressed in gpg of calcium carbonate, can be seen as follows, according to the Water Quality Association:Soft is defined as gpg less than 1.An intermediate level of difficulty is between 1 and 3.5 gpg.The category of fairly challenging ranges from 3.5 to 7 gpg.The hard range is between 7 and 10.5 gpg.It's regarded quite difficult to get above 10.5 gpg.To Learn more About grain per gallon refer to:
https://brainly.com/question/2350304
#SPJ1
select true or false: more energy is required to break a bond with an order of 3/2 than is required to break a bond of order 2.
Answer: The answer is false
Explanation:
What is the IUPAC name for the compound N₂O3?
Answer: Dinitrogen trioxide
Explanation:
Which of the following is NOT a correct formula unit for a salt made from main group elements?
Group of answer choices
KF
Na2S
Ca2O
Mg3N2
The formula unit of a salt that is not correct is [tex]Ca_{2} O[/tex] in option C.
What is a salt?A salt is almost always made up of a metal and a nonmetal element. The salts as we know them are mostly ionic in nature and they are known to be able to dissolve in solution when they are put into solution.
We know that the salt that they meant to show in option C is calcium oxide and the foregoing can not be the correct formula since both the calcium and the oxygen ions are divalent. The correct formula of the salt would be CaO.
Learn more about ionic salts:https://brainly.com/question/14515128
#SPJ1
according to the building-up principle or aufbau principle, which subshell is typically filled next after the 6s subshell?
Aufbau's principle states that an electron in an atom is filled according to the energy of orbitals, orbital with minimum energy is first filled, and so on.
so the order of filling of electrons in orbitals are 1s 2s 2p 3s 3p 4s 3d 4p 5s 4d 5p 6s 4f 5d 6p 7s 5f 6d 7p 8s.
so, the 4f subshell is filled after the complete filling of electrons in 6s.
know more about "Aufbau's principle" here:
brainly.com/question/15006708
allylic bromination of methylenecyclohexane would be expected to give two isomeric monobromination products. identify the other isomer. multiple choice a b c d
Two isomeric monobromination products should result from the allylic bromination of methylene cyclohexane, according to expectations. The final product will be 1-(bromomethyl)cyclohexene.
N-Bromosuccinimide, also known as NBS, is a chemical reagent utilized mostly in organic chemistry's electrophilic addition, electrophilic substitution, and radical substitution processes. It is regarded as an easy way to get bromine radicals. NBS interacts with the substance in an aqueous solution in alkenes to produce bromohydrins as the end result.
Allylic bromination is defined as the reaction employing NBS that results in the substitution of a bromine atom for hydrogens on a carbon next to a double bond.
Following drawing of the methylene cyclohexane extended structure, the reaction will be carried out using the reagent NBS.
The IUPAC name of the product is 1-(bromomethyl)cyclohexene.
Learn more about Allylic bromination:
brainly.com/question/21321095
#SPJ4
nickel has a face-centered cubic (fcc) structure and has a density of 8.90 g/cm3. what is its atomic radius?
The nickel has a face-centered cubic (fcc) structure and has a density of 8.90 g/cm3. its atomic radius is 1.36 × 10⁻⁸ cm.
given that :
density = 8.90 g/ cm³
the density is given as :
density = mass / volume
no. of atoms = 8 (1/8) + 6(1/2)
volume = (r × 8 (1/8))³
mass = 4 atoms × mol / 6.022 × 10²³ atoms × 58.68 g /mol
density = mass / volume
8.90 g/ cm³ = (4 atoms × mol / 6.022 × 10²³ atoms × 58.68 g /mol ) / (r × 8 (1/8))³
r = 1.36 × 10⁻⁸ cm
Thus, the atomic radius is 1.36 × 10⁻⁸ cm.
To learn more about atomic radius here
https://brainly.com/question/2795197
#SPJ4
Draw the Lewis structure for PF3Cl2 in the window below and then answer the questions that follow. What is the electron-pair geometry for P in PF3Cl2 ? What is the the shape (molecular geometry) of PF3Cl2?
Sp[tex]3[/tex] hybridization of a molecule with two lone pairs is present. This molecule's geometry is determined by its electron pair structure. If more than one bond angle is possible, separate each one with a space.
What is hybridization?The process of combining two atomic orbitals to produce a new variety of hybridized orbitals is described as hybridization. Usually, this mixing creates hybrid orbitals with entirely different energies, shapes, and other characteristics. Atomic orbitals with the same energy level are primarily responsible for hybridization. However, if the energies of the orbitals are equal, the process can involve both fully filled and partially filled orbitals. We can better understand bond formation, bond energies, and bond lengths by using the hybridization concept, which is an extension of valence bond theory. During the hybridization process, which primarily entails the merging of two orbitals, two "p" orbitals, or the mixing of a "s" orbital with a "p," the atomic orbitals of comparable energies are mixed together.To learn more about valence bond theory refer to:
https://brainly.com/question/23129240
#SPJ4
which type of substance is fast acting, either immediately suffocating the victim or causing massive burning?
Substance is fast acting, either immediately suffocating the victim or causing massive burning is chemical weapons.
Chemicals used to intentionally kill or damage people through their poisonous qualities are known as chemical weapons. Chemical weapons also include weapons, apparatus, and other gear made expressly for turning hazardous substances into weapons.
What chemical weapon has the highest lethality?
What VX is VX is a nerve toxin that was created by humans for use in chemical warfare. The most dangerous and quickly acting of the known chemical warfare agents are nerve agents.
Basically, these weapons were just common munitions like grenades and artillery rounds that had well-known industrial chemicals added to them. Among the chemicals employed were chlorine, mustard gas, which causes terrible skin burns, and phosgene, a choking toxin.
The most critical effects are paralysis of the respiratory muscles and inhibition of the respiratory center. Ultimately, death results due to respiratory paralysis. If the concentration of the nerve agent is high, death is immediate.
To learn more about chemical weapons. visit:
https://brainly.com/question/20291303
#SPJ4
the enthalpy of sublimation for a particular compound at 25.0 c is 32.4 kj/mol. the enthalpy of fusion for this compound at its melting point is 10.4 kj/mol. calculate the enthalpy of vaporization for this compound.
The enthalpy of vaporization for this compound is 22.0 kJ/mol.
What is vaporization?Vaporization is a process in which a liquid or solid is transformed into a gaseous state. It occurs when molecules in the liquid or solid absorb enough energy to break their intermolecular bonds and become a gas. This process can be carried out either through the application of heat or pressure, or through a process known as sublimation, which occurs when a solid is exposed to a vacuum.
ΔHₙ = ΔHₓ - ΔHₐ
Where, ΔHₙ = Enthalpy of vaporization
ΔHₓ = Enthalpy of sublimation (32.4 kj/mol)
ΔHₐ = Enthalpy of fusion (10.4 kj/mol)
ΔHₙ = 32.4 - 10.4
ΔHₙ = 22.0 kJ/mol
The enthalpy of vaporization for this compound is the difference between the enthalpy of sublimation and the enthalpy of fusion. Therefore, the enthalpy of vaporization for this compound is 22.0 kJ/mol.
To learn more about vaporization
https://brainly.com/question/24258
#SPJ4
Organisms typically have more than one form of each gene. If one form can mask the appearance of another form, that form is considered _______ the other form.
A.
better than
B.
dominant over
C.
recessive to
D.
worse than
If one form of a gene can mask the appearance of another form, that form is considered dominant over the other form. Option B.
What are dominant alleles?According to Mendel, genes are usually made up of 2 alleles. These alleles can be the same or different. When the alleles are the same, the gene is said to be homozygous. If the alleles are different, the gene is said to be heterozygous.
When the two alleles that make up a gene are different, one will be dominant and the other will be recessive. The dominant gene masks the effect of the recessive gene. In other words, the recessive gene cannot be expressed as long as it coexists with the dominant gene. In order for it to be expressed, it has to be in two copies or a homozygous recessive form.
For the dominant allele, however, only one copy is needed for it to be expressed.
In summary, if one form of a gene can mask the appearance of another form, that form is considered dominant over the other form.
More on genes can be found here: https://brainly.com/question/5519888
#SPJ1
Plastic beads used in jewelry making are made of long molecules usually consisting of carbon, hydrogen, and oxygen. Compare the bonding in these molecules to the bonding in gems.
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, gems have ionic bonding and plastic beads have covalent bonding.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond. Gems have ionic bonds formed between metals and nonmetals. Plastic beads, will have covalent bonds because it is easily deformed.
Therefore, gems have ionic bonding and plastic beads have covalent bonding.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ1
(d) Caesium is another element in Group 1 of the Periodic Table.
(i) The table below lists some statements about the reaction of caesium with
cold water compared to the reaction of lithium with cold water.
Place ticks (✓) in the boxes to show the two correct statements.
the reaction with caesium is more vigorous
the reaction with caesium produces a different gas
the reaction with caesium produces an acidic solution
the reaction with caesium produces a different compound
the reaction of caesium is endothermic
Answer: The reaction with caesium is more vigourus.
The reaction with caesium produces different compund.
Explanation:
Cold water and cesium react to produce hydrogen gas and a mixture of cesium and hydroxide ions as byproducts.
identify the initial and final states if an electron in hydrogen emits a photon with a wavelength of 656 nm .
The initial and final states if an electron in hydrogen emits a photon with a wavelength of 656 nm is n = 3 to n = 2.
given that :
wavelength of the photon emitted λ = 656 nm = 656 × 10⁻⁹ m
the energy of the photon is given as :
E = hc / λ
= (6.626 × 10⁻³⁴ × 3 ×10⁸ ) / 656 × 10⁻⁹
= 3 × 10⁻¹⁹ J = 1.9 eV
En = - 13.6 / n² eV
where n = 1,2,3 ....
1) n = 2 to n = 1
E2 - E1 = - 13.6 eV ( 1 / 4 - 1/ 1)
= 10.2 eV
2) n = 3 to n = 2
E3 - E2 = -13.6 eV ( 1/3² - 1/ 2² )
= 1.9 eV
Thus the initial and the final states are n = 3 to n = 2.
To learn more about wavelength here
https://brainly.com/question/29892125
#SPJ4
A kangaroo was 396 meters east of a lake. In 12 seconds, the kangaroo hopped one-third of the way to the lake at a constant velocity. What was the kangaroo's velocity?
The velocity of an object is the ratio of the distance to the time. The distance travelled by Kangaroo is 396 m in 12 seconds. So its velocity is 33 m/s.
What is velocity?Velocity is a physical quantity and it is the measure of distance travelled per unit time. Velocity is the rate of speed and it is a vector quantity.The velocity can be expressed in terms of m/s, Km/hr etc.
Mathematically, velocity is the ratio of distance to the time.
Given that, distance covered by kangaroo is 396 meters.
time taken = 12 s.
therefore, velocity can be calculated as follows:
velocity = distance/time
= 396 m / 12 s
= 33 m/s.
Therefore, the velocity of the kangaroo is 33 m/s.
To find more on velocity, refer here:
https://brainly.com/question/18084516
#SPJ1
classify each of the following characteristics as related to fusion, fission, or both
Used in nuclear
power plants
Byproducts have
long half-lives
Needs very high
temperatures
Releases lots
of energy
Occurs on the sun
Fission only
Fusion only
Fission and fusion
Nuclear Fission include used in nuclear power plants and byproducts have long half-lives, Nuclear fusion includes occurs on the sun and needs very high temperatures, while Nuclear fission and Nuclear fusion includes release lots of energy.
What are Nuclear fission nuclear and Nuclear fusion?Nuclear fission is a physico chemical process caused when an atom divides into two smaller atoms, which released important amounts of energy and it is used to generate electricity in nuclear power plants.
Conversely, Nuclear fusion occurs when smaller atoms such as hydrogen fuse to form larger atoms, which is able to generate much more energy when compares to Nuclear fusion, and this process fuel energy in the sun.
Therefore, with this data, we can see that fission nuclear and fusion nuclear are very different processes in terms of the division of fusion of atoms and they release differential amounts of energy.
Learn more about Nuclear fission here:
https://brainly.com/question/3992688
#SPJ1
F. According to the rules for naming compounds that you learned in this course, what is the
chemical name of this new product? What is its common name? (2 points)
Molecular compounds are termed by using the stem of the first element's name plus the suffix -ide, followed by the second element. Numerical prefixes are used to specify the number of atoms in a molecule.
What does "chemical common name" mean?The IUPAC defines a common name as one that clearly identifies a chemical but does not adhere to the current systematic naming convention. Acetone, which bears the scientific term, serves as an illustration of a common name. 2-propanone
What is the short answer to chemical?A chemical is any substance whose composition is known. A chemical always consists of the same "substance," to put it another way. Water is one of the substances found in nature.
To know more about Molecular compounds visit:-
https://brainly.com/question/20920787
#SPJ1
ip the electron in a hydrogen atom with an energy of -0.544 ev is in a subshell with 18 states. part a what is the principal quantum number, n, for this atom?
The principle quantum number(n) for this atom is 5
The position in an atom's shells and the size of an electron orbital are described by the primary quantum number, which is the most significant. The quantum number connected to the angular momentum of an atomic electron is called the azimuthal quantum number.
The energy of the electron in a hydrogen atom [tex]E_{n} = -0.544eV[/tex]
For hydrogen, Z = 1
The principal quantum number for [tex]n[/tex] for this atom is calculated by for this atom is determined using Bohr's atomic model,
So that [tex]E_{n} = \frac{-13.6(Z)^{2}}{n^{2}}eVatom^{-1}[/tex]
Where [tex]n[/tex] is the principal quantum number, [tex]E[/tex] is the energy, and [tex]Z[/tex] is the atomic number The values are substituted,
=> [tex]-0.544eV = -\frac{13.6(1)^{2}}{n^{2}} eVatom^{-1}[/tex]
[tex]n^{2} = -\frac{13.6}{-0.544} \\n^{2} = 25\\n = 5[/tex]
Learn more about Bohr's atomic model:
brainly.com/question/18642660
#SPJ4
a brittle white crystalline solid has a melting point of 760 c and reacts when added to water. this substance is most likely what type of solid
A brittle white crystalline solid reacts with when added to water is Quartz. It is a metamorphic solid.
Quartz is the most abundant silica mineral. Pure Quartz is colorless and transparent. It occurs in most igneous and practically all metamorphic and sedimentary rocks. It is used as a component of numerous industrial materials. Silicon (Si) has the atomic number 14 and is closely related to carbon. It is a relatively inert metalloid. Silicon is often used for microchips, glass, cement, and pottery. Silica is the most abundant mineral found in the crust of the earth. One of the most common uses of silica quarts is the manufacturer of glass. Quartz is the second most abundant mineral in the Earth's crust. Its chemical name is SiO2.
To learn more about Quartz please visit:
https://brainly.com/question/19451647
#SPJ4
An apple costs $0.63. One tree produces 418 apples. The orchard has 20 trees. The apple farmer wants to trade the orange farmer 3 oranges for every 2 apples. How many oranges is he able to obtain by trading 0.64 of his orchard?
The apple farmer is able to obtain 8,034.6 oranges by trading 0.64 of his orchard.
How to determine how many oranges he is able to obtain by trading 0.64 of his orchard?
A word problem is a mathematical exercise where significant background information on the problem is presented in ordinary language rather than in mathematical notation
First, let's find the total number of apples produced by the orchard:
20 trees × 418 apples/tree = 8,360 apples
Now, let's find the number of apples that the apple farmer is able to trade: 8,360 apples × 0.64 = 5,350.4 apples
Since the apple farmer wants to trade 3 oranges for every 2 apples, he will be able to obtain:
3 oranges / 2 apples × 5,350.4 apples = 8,025.6 oranges.
Therefore, the apple farmer is able to obtain 8,025.6 oranges by trading 0.64 of his orchard.
Learn more about word problems on:
brainly.com/question/1781657
#SPJ1
Which type of isomers are o-xylene, m-xylene, and p-xylene?
structural isomers
optical isomers
geometric isomers
o-xylene, m-xylene, and p-xylene are structural isomers.
o-xylene, m-xylene, and p-xylene are examples of aromatic isomers, also known as ortho-, meta-, and para-xylene, respectively. These isomers are classified as aromatic because they are part of a family of compounds known as aromatic hydrocarbons, which contain a ring of six carbon atoms bonded to each other in a specific way.
o-xylene, m-xylene, and p-xylene are also examples of structural isomers. Structural isomers are compounds that have the same molecular formula but differ in the arrangement of their atoms. In the case of o-xylene, m-xylene, and p-xylene, the atoms are arranged differently around the ring of six carbon atoms.
o-xylene, m-xylene, and p-xylene are not optical isomers, which are also known as enantiomers. Optical isomers are compounds that are mirror images of each other but are not superimposable. Optical isomers are important in medicinal chemistry because they can have different biological properties even though they have the same molecular formula and structure.
o-xylene, m-xylene, and p-xylene are also not geometric isomers. Geometric isomers are compounds that have the same molecular formula and the same arrangement of atoms, but differ in the orientation of their atoms or groups of atoms in space. Geometric isomers are often found in compounds with cis-trans double bonds or ring structures.
What is the correct molecular formula for the compound magnesium chromate pentahydrate?
MgCrO4•5H2O is the answer
The correct molecular formula for the compound magnesium chromate pentahydrate is as follows: MgCrO₄•5H₂O.
What is molecular formula?Molecular formula in chemistry is a notation indicating the number of atoms of each element present in a compound.
Chemical or molecular formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus (+) and minus (−) signs.
The chemical formula also reveals information about the types and number of atoms that make up a chemical compound or molecule.
For example; a chemical compound named magnesium chromate pentahydrate will have a chemical formula of MgCrO₄•5H₂O.
This tells us that the compound contains magnesium, chromium, oxygen, and hydrogen atoms.
Learn more about molecular formula at: https://brainly.com/question/28647690
#SPJ1
consider the following oxides: so2so2 , y2o3y2o3 , mgomgo , cl2ocl2o , and n2o5n2o5 . how many are expected to form acidic solutions in water?
Nonmetal oxides form acid solutions. SO2, Cl2O, and N2O5 are acid solutions.
A chemical that offers off hydrogen ions in water and paperwork salts through combining with positive metals. Acids have a sour flavor and turn positive dyes purple. a few acids made by using the body, such as gastric acid, can assist organs work the way they must. An example of an acid is hydrochloric acid.
An acidic solution has a high attention of hydrogen ions, H +start superscript, plus, stop superscript, greater than that of pure water. An acidic solution is a liquid combination that happens when hydrogen ions are launched while mixed with water. This definition is known as the Brønsted-Lowry theory: acids provide hydrogen protons, at the same time as bases "accept" hydrogen protons. some answers are more acidic than others.
Learn more about acid solutions here:- https://brainly.com/question/14102151
#SPJ4
)the decomposition of dinitrogen pentoxide is described by the chemical equation2 n2o5(g) 4 no2(g) o2(g)if the rate of appearance of no2 is equal to 0.560 mol/min at a particular moment, what is the rateof appearance of o2 at that moment?2)a)0.280 mol/minb)1.12 mol/minc)2.24 mol/mind)0.140 mol/min
The rate of appearance of o2 at that moment is 2.80 mol/min.
Calculation :
Recall
aA+bB→ cC+dD
[tex]\frac{d[A]}{a.dt}[/tex] = [tex]\frac{d[B]}{b.dt}[/tex] = [tex]\frac{d[C]}{c.dt}[/tex] = [tex]\frac{d[D]}{d.dt}[/tex]
Then
[tex]\frac{d[NO_{2} ]}{2.dt}[/tex] = [tex]\frac{d[NO_{2} ]}{4.dt}[/tex]
Replacing :
[tex]\frac{1.4}{2}[/tex] = [tex]\frac{d[NO_{2} ]}{4.dt}[/tex] ....... [tex]\frac{d[NO_{2} ]}{dt}[/tex] = 2.8
Degradation is the first step in the recycling of nutrients that an organism (plant or animal) uses to build its body. This is the process by which dead tissue is broken down and transformed into simpler organic forms.They are the food source for many species that underlie ecosystems.
Decomposition or putrefaction is the process by which dead organic matter breaks down into simple organic or inorganic matter such as carbon dioxide, water, simple sugars and inorganic salts. This process is part of the nutrient cycle and is essential for recycling the finite substances that occupy the physical space of the biosphere. An organism's body begins to decompose shortly after death. Animals such as earthworms also help break down organic matter.
Learn more about decomposition here : https://brainly.com/question/27746877
#SPJ4
How specifically is kinetic energy lost during a car crash?
Answer + Explanation:
During a car crash, kinetic energy is lost through various forms of deformation of the vehicle and the generation of heat.
When a car collides with another object, the force of the impact causes the vehicle's body and structure to deform. This deformation absorbs some of the kinetic energy and converts it into other forms of energy, such as heat and sound.
In addition, friction between the moving parts of the car and between the car and the road can also generate heat, which absorbs some of the kinetic energy.
The amount of kinetic energy lost during a car crash depends on the mass of the vehicle, the speed at which it was traveling, and the type and severity of the collision. In general, higher speeds and more severe collisions result in greater kinetic energy loss.
please answer the following
Answer: Kinetic Energy
Explanation:
Gravitational potential energy of each drop converts to kinetic energy when water drops into a reservoir.
if we use a to represent the cations (in blue) and x to represent the anions (in green), what is the empirical formula of this ionic compound?
The empirical formula for the compound if A denotes the cations and X denotes the anions is AX₂
It is given that the cations are denoted by Blue color and the anions with green color. There are 8 atoms in the corners and 6 in the face center. Then,
No of atoms in a total of all corners = 8 x 1/8
No of atoms in the corners = 1
No of atoms in the faces = 6 x 1/2
No of atoms in the faces = 3
Then,
Total no of cations atoms = total number of atoms in the corners + the total number of atoms in the faces
Total number of cations (A) = 1 + 3
Total number of cations (A) = 4
The total number of anions in the cell is 8 from the figures as they aren't shared with another lattice arrangement. Therefore,
Number of anions (X) = 8
Then the empirical formula would be A₄X₈ which could be written in the simplified form of AX₂.
Thus, the empirical formula is AX₂ for the arrangement.
To know more about the arrangement of atoms in solids, click here:
https://brainly.com/question/18924454
#SPJ4
A buffer solution is prepared that is 0.18 M NH3 and 0.27 M NH4Cl. What is the pH of this buffer? Kb for NH3 is 1.8 x 10-5
The correct answer is: 9.08
Can someone explain how to do this for me?
The pH of acid is between 0-7 on pH scale while for base pH range is from 7-14. Therefore, the pH of this buffer is 5.14. pH is a unitless quantity.
What is pH?pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. More the value of hydronium ion concentration, more will be the solution acidic.
On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution. pH depend on the temperature. At room temperature pH scale is between 0 to 14. pH of neutral solution is 7.
0.18 M =NH₃
0.27 M= NH₄Cl.
Kb of NH₃ = 1.8 × 10⁻⁵
pKb = - log (kb)
= - log (1.8 × 10⁻⁵)
= 4.74
Using Henderson equation
pH = Pkb +ln [ NH₄Cl ]/ [NH₃]
= 4.74 + ln (0.27 /0.18)
= 5.14
Therefore, the pH of this buffer is 5.14.
To learn more about pH, here:
https://brainly.com/question/27945512
#SPJ1
333
Identifying States of Matter
Use the drop-down menus to complete the statements.
✓have a definite shape and volume.
do not have a definite volume or shape.
have a definite volume, but the shape may change.
States of matter:
Solids: have a definite shape and volume.
Gases: do not have a definite volume or shape.
Liquids: have a definite volume, but the shape may change.
What is states of matter?
States of matter refer to the physical behavior of matter based on its temperature and pressure. There are three main states of matter: solid, liquid, and gas.
There are also several other states of matter, such as plasma and Bose-Einstein condensate, that are observed under certain conditions, such as extremely high temperatures or pressures.
According to the problem:
Solids are characterized by their ability to maintain a fixed shape and volume. They are typically solid at room temperature and have a high degree of structural rigidity.
Gases, on the other hand, do not have a definite shape or volume. They are characterized by their ability to expand and fill any container they are placed in. Gases are typically in a gaseous state at room temperature and are highly compressible.
Liquids are intermediate between solids and gases. They have a definite volume, but the shape may change to conform to the shape of their container. Liquids are typically liquid at room temperature and are less compressible than gases, but more compressible than solids.
To know more about states of matter, visit:
https://brainly.com/question/29069107
#SPJ1
when aqueous solutions of iron(iii) sulfate and potassium phosphate are combined, solid iron(iii) phosphate and a solution of potassium sulfate are formed. the net ionic equation for this reaction is:
The solubility laws that regulate ionic chemicals in an aqueous solution are the main focus of double replacement reactions. The insoluble iron(III) phosphate, FePO4, precipitates out of the solution when these two solutions are combined because the iron(III) cations and phosphate anions combine to make it.
FeBr3(aq)+K3PO4(aq)→FePO4(s)⏐↓+3KBr(aq)
Ionic equations are chemical formulas in which the electrolytes in aqueous solution are stated as dissociated ions, in contrast to molecular equations, which express compounds as molecules. The ionic species are typically followed by (aq) in the equation to denote that they are in an aqueous solution, and the substance in question is typically a salt that has been dissolved in water.
To know more about solubility, click the below link
https://brainly.com/question/28170449
#SPJ4
