Answer:
H+/PO-4^-2
Explanation:
hydrogen has dissolved completely
In the given reaction conjugate base is H₂PO₄⁻, it also behave as a weak acid.
What is acid - conjugate base pair?
An acid and conjugate base pairs are those pairs in which they are differentiated by the one atom of hydrogen atom.
Given chemical reaction is:
H₃PO₄ + H₂O → H₂PO₄⁻ + H₃O⁺
In the above reaction H₃PO₄ is an acid as it gives H⁺ ion to the solution and formed H₂PO₄⁻, which is a conjugate base of H₃PO₄ acid. H₂PO₄⁻ will also behave as an acid because it have H⁺ ion to gives in the solution but nature of this acid is weak as they not readily dissociates.
Hence, H₂PO₄⁻ is a conjugate base.
To know more about acid-base pair, visit the below link:
https://brainly.com/question/14971866
A compound is found to contain 30.45 % nitrogen and 69.55 % oxygen by weight. To answer the questions, enter the elements in the order presented above. 1. What is the empirical formula for this compound? 2. The molecular weight for this compound is 46.01 g/mol. What is the molecular formula for this compound?
Answer:
Empirical formulae is NO2
Molecular Formulae is NO2
How many grams of H2O will be formed when 32.0 g H2 is mixed with 73.0 g of O2 and allowed to react to form water
hope this helps u
pls mark as brainliest .-.
In the Lewis structure of AB4 where B is more electronegative than A. Both are main group elements where A has 8 valence electrons and each B has 7 valence electrons.
Required:
a. What is the total number of valence electrons?
b. How many lone pairs are in the molecule?
Answer:
1. 36
2. Two
Explanation:
The Lewis structure shows the valence electrons present in a compound. Usually the valence electrons are shown as dot structures around the symbol of the elements involved in the compound.
For a compound AB4 where B is more electronegative than A and A has 8 electrons in its valence shell, there will be thirty six valence electrons on the outermost shell of the molecule.
There are six electron pair domains present in the molecule, four bond pairs and two lone pairs. The molecule is in a square planar geometry.
Answer: a- 36 valence electrons
b- 14 lone pairs
Explanation:
Valence is equal to A + 4B = 8 + 4(7)
With 4 bonds between A and the 4 B, that is 36 valence minus 8 electrons in those pairs = 28. 28 is 14 lone pairs.
What creation would you make if you had access to any of the chemical elements? can someone answer this for me please.
Answer:
Depends on the chemicals.
Explanation:
The creation of something depends on the chemical we have. If I have chemicals such as acid and base so I can produce salt and water by mixing acid and base. If I have ethanol, vegetable oil and sodium hydroxide which is a catalyst, I can produce biodiesel which can be used in vehicles instead of fossil fuel. If I have sodium element and chlorine gas, I can produce sodium chloride also known as table salt.
Fireworks are chemical reactions that release energy. Which of these phenomena are caused by chemical reactions that release energy? If you’re not sure, make a guess.
Answer:
All chemical reactions involve energy. Energy is used to break bonds in reactants, and energy is released when new bonds form in products. Endothermic reactions absorb energy, and exothermic reactions release energy. The law of conservation of energy states that matter cannot be created or destroyed.
A 1.2 L weather balloon on the ground has a temperature of 25°C and is at atmospheric pressure (1.0 atm). When it rises to an elevation where the pressure is 0.73 atm, then the new volume is 1.8 L. What is the temperature (in °C) of the air at this elevation?
Answer:
The temperature of the air at this given elevation will be 53.32425°C
Explanation:
We can calculate the final temperature through the combined gas law. Therefore we will need to know 1 ) The initial volume, 2 ) The initial temperature, 3 ) Initial Pressure, 4 ) Final Volume, 5 ) Final Pressure.
Initial Volume = 1.2 L ; Initial Temperature = 25°C = 298.15 K ; Initial pressure = 1.0 atm ; Final Volume = 1.8 L ; Final pressure = 0.73 atm
We have all the information we need. Now let us substitute into the following formula, and solve for the final temperature ( T[tex]_2[/tex] ),
P[tex]_1[/tex]V[tex]_1[/tex] / T[tex]_1[/tex] = P[tex]_2[/tex]V[tex]_2[/tex] / T[tex]_2[/tex],
T[tex]_2[/tex] = P[tex]_2[/tex]V[tex]_2[/tex]T[tex]_1[/tex] / P[tex]_1[/tex]V[tex]_1[/tex],
T[tex]_2[/tex] = 0.73 atm [tex]*[/tex] 1.8 L [tex]*[/tex] 298.15 K / 1 atm [tex]*[/tex] 1.2 L = ( 0.73 [tex]*[/tex] 1.8 [tex]*[/tex] 298.15 / 1 [tex]*[/tex] 1.2 ) K = 326.47425 K,
T[tex]_2[/tex] = 326.47425 K = 53.32425 C
Which of the following provides a characteristic of
MgO(s) with a correct explanation?
Choose 1 answer:
А
It is hard because its ions are held together by strong
electrostatic attractions.
B
It is malleable because its atoms can easily move past
one another without disrupting the bonding.
It is a poor conductor of electricity because its
electrons are tightly held within covalent bonds and
lone pairs.
It has a high melting point because its molecules
interact through strong intermolecular forces.
Answer:
А It is hard because its ions are held together by strong electrostatic attractions.
B It is malleable because its atoms can easily move past one another without disrupting the bonding.
Explanation:
These are correct explanations of the properties of magnesium.
C is wrong. Mg is a good conductor of electricity and it has metallic bonds.
D is wrong. Mg has no molecules. It has no intermolecular forces.
15. Calculate the critical angle of glass and water combination. Show your calculation. 16. What is the critical angle for the interface between Mystery A and glass
Answer:
15. Critical angle of glass and water combination, θ = 62.45°
16. Critical angle for the interface between Mystery A and glass, θ = 37.93°
Note; The question is incomplete. The complete question is as follows:
Medium Air Water Glass Mystery A Mystery B Table-2 Speed (m/s) 1.00 C 0.75 c 0.67 0.41 c 0.71 c n 1.00 1.33 1.50 Index of Refraction n of a given medium is defined as the ratio of speed of light in vacuum, c to the speed of light in a medium, v. n = c/v
Table-4: Incident Angle (degrees) Reflected Angle Refracted angle (degrees) (degrees) % Intensity of reflected ray 0 10 20 30 40 50 N/A N/A N/A 30 40 50 0 11.3 22.7 34.2 46.3 59.5 N/A N/A N/A 0.67 1.22 3.08 % Intensity of refracted ray 100 100 100 99.33 98.78 96.92
When rays travel from a denser medium to a less dense medium, we can define a critical angle of incidence θ such that refracted angle θ₂ = 90°. Applying Snell's law: Critical angle θ = sin-1(n₂/n₁).
When the angle of incidence is greater than the critical angle, 100% of the light intensity is reflected. This is called total internal reflection because all the light is reflected.
15. Calculate the critical angle of glass and water combination. Show your calculation.
16. What is the critical angle for the interface between Mystery A and glass?
Explanation:
15. Applying Snell's law; Critical angle θ = sin-1(n₂/n₁).
where n₂,refractive index of water = 1.33, n₁, refractive index of glass = 1.50 since glass is denser than water
θ = sin-1(1.33/1.50)
θ = 62.45°
Critical angle of glass and water combination, θ = 62.45°
16. Refractive index of mystery A , n = c/v
where v = 0.41 c
therefore, n = c / 0.41 c = 2.44
Critical angle for the interface between Mystery A and glass, θ = sin-1(n₂/n₁).
where n₂,refractive index of glass = 1.50, n₁, refractive index of mystery A = 2.44 since mystery A is denser than glass as seen from its refractive index
θ = sin-1(1.50/2.44)
θ = 37.93°
Critical angle for the interface between Mystery A and glass, θ = 37.93°
Which of the following is required for the flow of current in all systems?
a) the presence of ions
b) an electrical potential ofo
c) a closed circuit
d) a short circuit
Answer:
I would say c) a closed circuit.
Hope I was right.
The standard free energy change for a reaction can be calculated using the equation ΔG∘′=−nFΔE∘′ ΔG∘′=−nFΔE∘′ where nn is the number of electrons transferred, FF is Faraday's constant, 96.5 kJ·mol−1·V−1, and ΔE∘′ΔE∘′ is the difference in reduction potential. For each of the given reactions, determine the number of electrons transferred (n)(n) and calculate standard free energy (ΔG∘′)(ΔG∘′) . Consider the half-reactions and overall reaction for reaction 1. half-reactions:fumarate 2−+2H+CoQH2↽−−⇀succinate−↽−−⇀CoQ+2H+ half-reactions:fumarate−+2H+↽−−⇀succinate2−CoQH2↽−−⇀CoQ+2H+ overall reaction:fumarate2−+CoQH2↽−−⇀succinate2−+CoQΔE∘′=−0.009 V
Answer:
ΔG°′ = 1.737 KJ/mol
Explanation:
The reaction involves the transfer of two electrons in the form of hydride ions from reduced coenzyme Q, CoQH₂ to fumarae to form succinate and oxidized coenzyme Q, CoQ.
The overall equation of reaction is as follows:
fumarate²⁻ + CoQH₂ ↽⇀ succinate²⁻ + CoQ ; ΔE∘′=−0.009 V
Using the equation for standard free energy change; ΔG°′ = −nFΔE°′
where n = 2; F = 96.5 KJ.V⁻¹.mol⁻¹; ΔE°′ = 0.009 V
ΔG°′ = - 2 * 96.5 KJ.V⁻¹.mol⁻¹ * 0.009 V
ΔG°′ = 1.737 KJ/mol
g Which ONE of the following pairs of organic compounds are NOT pairs of isomers? A) butanol ( CH3-CH2-CH2-CH2-OH ) and diethyl ether ( CH3–CH2–O–CH2–CH3 ) B) isopentane ( (CH3)2-CH-CH2-CH3 ) and neopentane ( (CH3)4C ) C) ethanolamine ( H2N-CH2-CH2-OH ) and acetamide ( CH3-CO-NH2 ) D) acrylic acid ( CH2=CH-COOH ) and propanedial ( OHC–CH2–CHO ) E) trimethylamine ( (CH3)3N ) and propylamine ( CH3-CH2-CH2-NH2 )
Answer:
ethanolamine ( H2N-CH2-CH2-OH ) and acetamide ( CH3-CO-NH2 )
Explanation:
Isomers are compounds that have the same molecular formula but different structural formulas. Hence any pair of compounds that can be represented by exactly the same molecular formula are isomers of each other.
If we look at the pair of compounds; ethanolamine ( H2N-CH2-CH2-OH ) and acetamide ( CH3-CO-NH2 ), one compound has molecular formula, C2H7ON while the other has a molecular formula, C2H5ON, hence they are not isomers of each other.
Calculate the molarity of a solution containing 29g of glucose (C 6 H 12 O 6 ) dissolved in 24.0g of water. Assume the density of water is 1.00g/mL.
Answer:
whats the ph ofpoh=9.78
Explanation:
Write the equations that represent the first and second ionization steps for sulfuric acid (H2SO4) in water.
Answer:
[tex]H_2SO_4(aq)\rightarrow H^+(aq)+HSO_4^-\\\\HSO_4^-(aq)\rightarrow H^+(aq)+SO_4^{2-}rightarrow[/tex]
Explanation:
Hello,
In this case, given that the sulfuric acid is a diprotic acid (two hydrogen ions) we can identify two ionization reactions, the first one, showing up the dissociation of the first hydrogen to yield hydrogen sulfate ions and the second one, showing up the dissociation of the hydrogen sulfate ions to hydrogen ions and sulfate ions by separated as shown below:
[tex]H_2SO_4(aq)\rightarrow H^+(aq)+HSO_4^-\\\\HSO_4^-(aq)\rightarrow H^+(aq)+SO_4^{2-}[/tex]
They are have one-sensed arrow, since sulfuric acid is a strong acid.
Regards.
The equations that represent the first and second ionization steps for sulfuric acid in water are H₂SO₄→HSO₄+H⁺ & HSO₄⁻→SO₄⁻+H⁺ respectively.
What is ionization reaction?Ionization reactions are those reactions in which atom or molecule will convert into ion by bearing a positive or negative charge on itself.
In water in the following way ionization of sulphuric acid takes place:
In the first ionization step one hydrogen atom (H⁺) will loose from the sulphuric acid molecule as:H₂SO₄ → HSO₄⁻ + H⁺
In the second ionization step another hydrogen atom will also loose and we get the sulphate ion (SO₄⁻) and one proton (H⁺) as:HSO₄⁻ → SO₄⁻ + H⁺
Hence, two steps are shown above.
To know more about ionization reaction, visit the below link:
https://brainly.com/question/1445179
Which of the following represents six molecules of water? 6HO 2 6H 2O 1 6H 2O H 6O
Answer:
6H20 represents six molecules of water
Answer:
6H20 represents six molecules of water
Explanation:
Which of the examples is potassium?
es )
A)
B)
B
C)
Answer:
examples of things which contain potassium are:
green vegetables
root vegetables
fruits
potassium chloride
potassium sulphate
Explanation:
if you need a specific answer please send the options
Answer:
C
Explanation:
The answer is the one with 20 protons, 20 neutrons, and 6-8-8-2 electrons.
For element radon, give the chemical symbol, atomic number, and group number.
Please help, Which molecule is shown below
Answer:
Option B. 3–methylheptane.
Explanation:
To obtain the name of the compound given in the question above, we must
1. Determine the functional group of the compound.
2. Locate the longest continuous carbon chain. This gives the parent name of the compound.
3. Identify the substituent groups attached.
4. Locate the position of the substituent group attached by giving it the lowest possible count.
5. Combine the above to obtain the name.
Now let us name the compound given in the question above.
1. The compound is an alkane since it contains only single bond.
2. The longest continuous carbon chain is 7. Hence the parent name I the compound is heptane.
3. The substituent group attached is
—CH3 i.e methyl.
4. The substituent group attached is at carbon 3.
5. Therefore, the name of the compound is:
3–methylheptane.
Ammonia, methane, and phosphorus trihydride are three different compounds with three different boiling points. Rank their boiling points in order from lowest to highest.
A. CH4< NH3 < PH3
B. NH3 < PH3< CH4
C. CH4 < PH3 < NH3
D. NH3 < CH4< PH3
E. PH3< NH3 < CH4
Answer:
B. NH3 < PH3< CH4
Explanation:
Hello,
In this case, taking into account that the boiling point of ammonia, methane and phosphorous trihydrate are -33.34 °C , -161.5 °C and -87.7 °C , clearly, methane has the lowest boiling point (most negative) and ammonia the greatest boiling point (least negative), therefore, ranking is:
B. NH3 < PH3< CH4
Best regards.
Question 8 of 30
When is a redox reaction spontaneous?
A. When a metal electrode is in contact with an electrolyte
B. When a power source supplies an electrical current
C. When the cell potential is positive
D. When the cell potential is negative
According to the concept of redox reactions, the answer to this question is option C.
When the cell potential is positive. A redox reaction is spontaneous when the cell potential is positive.The cell potential is the measure of the driving force of the chemical reaction occurring in the electrochemical cell. In an electrochemical cell, a redox reaction occurs, which leads to the production of an electric potential.
If this potential is positive, then the redox reaction is considered spontaneous. However, if the potential is negative, then the reaction is non-spontaneous.In general, a redox reaction is spontaneous if the potential difference between the two electrodes of the cell is positive. This means that the reaction will occur spontaneously without any external energy input.
Thus, the correct option is C.
Learn more about redox reaction,here:
https://brainly.com/question/28300253
#SPJ4
(9443+45−9.9) (9443+45−9.9) ×8.4× 10 6
what is non metal?
help meh
The element which can not loose electron easily and having electronagtive character is called non-metal it has following property-1. it can not conduct heat and electricity1. it is netiher ductile not malleable3. it is not lsuturous and also not sonorous
Answer:
Non-metals are the elements which form negative ions by accepting or gaining electrons. Non-metals usually have 4, 5, 6 or 7 electrons in their outermost shell. Non-metals are those which lack all the metallic attributes. They are good insulators of heat and electricity. They are mostly gases and sometimes liquid.
(a) Identify the name of the method used below for the separation.
(b) Give one more application of this method of separation.
(c) What is the name for the line at position B ?
(d) what conclusions can you draw about the colours present in sweets C and D ?
Answer:
(a) Chromatography
(b) DNA fingerprinting
(c) Origin
(d) Sweet C consists of more colours than sweet D.
ii. The speed of colours in sweet C are proportional to one another, while that of colours in D is not.
Explanation:
Chromatography is one of the physical method of separating mixtures. This process composed of the ability of the constituents in a mixture to separate by virtue of rate of movement through a medium, thus separates into constituents.
It can be used to determine the soluble constituents of a given mixture. And for purification purpose.
Does a reaction occur when aqueous solutions of potassium hydroxide and chromium(III) bromide are combined
Explanation:
Potassium hydroxide = KOH
Chromium(iii)bromide = CrBr3
Yes! A reaction occurs. This is given by the balanced equation;
3 KOH + CrBr3 → 3 KBr + Cr(OH)3
If a reaction is first-order with respect to a particular reactant, when the concentration of that reactant is increased by a factor of 2, the reaction rate will _____.
Answer:
It would increase by a factor of 2
Explanation:
The rate law for a fist order reaction is given as;
A --> B
rate = k [A]
upon doubling the concentration, we have;
rate = k [A]
rate 2 = k 2 [A]
Dividing both equations;
rate 2 / rate 1 = k 2 [A] / k [A]
rate 2 / rate 1 = 2 / 1
The ratio between rate 2 and rate 1 is 2 : 1. This means that the reaction rate would also increase by a factor of 2.
How to do q solution, qrxn, moles of Mg , and delta Hrxn?
Answer:
14, 508J/K
ΔHrxn =q/n
where q = heat absorbed and n = moles
Explanation:
m = mass of substance (g) = 0.1184g
1 mole of Mg - 24g
n moles - 0.1184g
n = 0.0049 moles.
Also, q = m × c × ΔT
Heat Capacity, C of MgCl2 = 71.09 J/(mol K)
∴ specific heat c of MgCL2 = 71.09/0.0049 (from the formula c = C/n)
= 14, 508 J/K/kg
ΔT= (final - initial) temp = 38.3 - 27.2
= 11.1 °C.
mass of MgCl2 = 95.211 × 0.1184 = 11.27
⇒ q = 11.27g × 11.1 °C × 14, 508 j/K/kg
= 1,7117.7472 J °C-1 g-1
∴ ΔHrxn = q/n
=1,7117.7472 ÷ 0.1184
= 14, 508J/K
When 91.96g of Na reacts with 32.o g of O2 how many grams of NaO2 are produced
Answer:
123.96 g Na₂O
Explanation:
4 Na + O₂ ⇒ 2 Na₂O
You first need to find the limiting reagent. Convert the reactants to moles and see which produces the least amount of product using the mole ratios in the chemical equation.
(91.96 g Na)/(22.99 g/mol Na) = 4 mol Na
(4 mol Na) × (2 mol Na₂O/4 mol Na) = 2 mol Na₂O
(32.0 g O₂)/(32.0 g/mol) = 1 mol O₂
(1 mol O₂) × (2 mol Na₂O/1 mol O₂) = 2 mol Na₂O
Since they both produce the same amount of product, you don't need to pick a limiting reagent. Now, convert moles of Na₂O to grams.
(2 mol Na₂O) × (61.98 g/mol Na₂O) = 123.96 g Na₂O
A chemist prepares a solution of sodium nitrate by measuring out of sodium nitrate into a volumetric flask and filling the flask to the mark with water.
Calculate the concentration in mol/L of the chemist's sodium nitrate solution. Round your answer to 3 significant digits.
Answer:
5.74M or 5.74 mol/L (to 3 sign. fig.)
Explanation:
The molar mass of NaNO3 is 85g/mol, which means that:
1 mole of NaNO3 - 85g
? moles - 122.0g
= 122/85 = 1.44 moles
Concentration in mol/L = no. of moles (moles) ÷ volume (L)
[tex]\frac{1.44}{0.250}[/tex] = 5.74M or 5.74 mol/L (to 3 sign. fig.)
I hope the steps are clear and easy to follow.
Using the following diagram, determine which of the statements below is true: The activation energy for the forward reaction is −60 J. The overall energy change for the forward reaction is −20 J. The activation energy for the reverse reaction is −80 J. The overall energy change for the reverse reaction is −40 J.
Answer:its saturated or unsaturaded
Explanation:
Which of the following is a covalent bond? A NaCl B K2O C H2O D MgO
Answer:
[tex]H_2O[/tex]
Explanation: Research has proven that ;
Water is a Polar Covalent Molecule
It consists of 2 Hydrogen molecules bonded to one Oxygen molecule and the two hydrogen atoms are not evenly distributed around the oxygen atom.
A student sets up the following equation to convert a measurement. The (?) Stands for a number the student is going to calculate. Fill in the missing part of this equation. (0.030 cm^3) x ? =m^3
Answer:
\text{0.30 cm}^{3} \times \left (\dfrac{10^{-2}\text{ m}}{\text{1 cm}}\right )^{3} = 3.0 \times 10^{-7} \text{ m}^{3}
Explanation:
0.030 cm³ × ? = x m³
You want to convert cubic centimetres to cubic metres, so you multiply the cubic centimetres by a conversion factor.
For example, you know that centi means "× 10⁻²", so
1 cm = 10⁻² m
If we divide each side by 1 cm, we get 1 = (10⁻² m/1 cm).
If we divide each side by 10⁻² m, we get (1 cm/10⁻² m) = 1.
So, we can use either (10⁻² m/1 cm) or (1 cm/10⁻² m) as a conversion factor, because each fraction equals one.
We choose the former because it has the desired units on top.
The "cm" is cubed, so we must cube the conversion factor.
The calculation becomes
[tex]\text{0.30 cm}^{3} \times \left (\dfrac{10^{-2}\text{ m}}{\text{1 cm}}\right )^{3} = 0.30 \times 10^{-6}\text{ m}^{3} = \mathbf{3.0 \times 10^{-7}} \textbf{ m}^{\mathbf{3}}\\\\\textbf{0.30 cm}^{\mathbf{3}} \times \left (\dfrac{\mathbf{10^{-2}}\textbf{ m}}{\textbf{1 cm}}\right )^{\mathbf{3}} = \mathbf{3.0 \times 10^{-7}} \textbf{ m}^{\mathbf{3}}[/tex]
