consider the lines and the transversal drawn in coordinate plane below.

Answer:

Step-by-step explanation:

This equation turns out to be a quartic. I'm not sure what should be done with. I can't believe you were asked to find its roots which are unbelievably complex. Here is a graph with the only 2 points that are easily found. If I am not solving what you need, please leave a note.

9514 1404 393

Answer:

  (a)  42.3°

Step-by-step explanation:

Side 'a' is the shortest of three unequal sides, so angle A will be the smallest angle in the triangle. Its measure can be found from the Law of Cosines.

  a² = b² +c² -2bc·cos(A)

  cos(A) = (b² +c² -a²)/(2bc) = (21² +25² -17²)/(2·21·25) = 777/1050

  A = arccos(777/1050) ≈ 42.3°

The measure of angle A is about 42.3°.

_____

Additional comment

The smallest angle in a triangle can never be greater than 60°. This lets you eliminate choices that exceed that value.

Answer:

 (a)  42.3°

Step-by-step explanation:

Answer:

max: -4

Step-by-step explanation:

(x+3)^2 》0 mọi x

<=> -(x+3)^2 《0

<=> -(x+3)^2 -4 《 -4

Hey there!

We know that Danielle earns $10 per hour, so muliply that by 3 and get 30.

Because Danielle works an extra half an hour, divide 10 by 2 and get 5.

Danielle earns $35 in 3 hours and a half.

Hope this helps! Please mark me as brainliest!

Have a wonderful day :)

Answer:

900 is the correct awnser

When the Center of dilation is inside the figure

When the Center of dilation is outside the figure

    3. The original figure is closer to the the center of dilation

    4. The dilated figure is closer to the center of dilation

The center of dilation is the fixed point from which the distances in a dilation are measured

The scale factor is ratio of the side lengths of an original figure or preimage to  the side lengths of the newly formed image

Center of dilation is inside the figure

The distance of a point on the dilated figure, including the distances from the center of dilation is 3 times the distances of points on the original image from the center of dilation

Therefore, the original figure has a shorter distance to and is therefore closer to the the center of dilation than the dilated figure

     2. Where the center of dilation is inside the figure, and the scale factor is a fraction between 0 and 1 k = 1/2, we have;

The distance of a point on the dilated figure, including the distances from the center of dilation is 1/2 times the distances of points on the original image from the center of dilation

Therefore, the dilated figure has a shorter distance to and is therefore closer to the the center of dilation than the original figure

Center of dilation outside the figure

     3. Given that the center of dilation is outside the figure and the scale factor is larger than 1, k = 120% = 120/100 = 1.2 > 1, we have;

The distance of the dilated figure from the center of dilation is 120% of the distance of the original figure from the center of dilation, therefore, the original figure is closer to the the center of dilation than the dilated figure

     4. Where the center of dilation is outside the figure and the scale factor is a fraction between 0 and 1, k = 0.1 < 1

The distance of the dilated figure from the center of dilation is only 0.1 times the distance of the original figure from the center of dilation, and therefore, the dilated figure is closer to the center of dilation

Learn more about scale factors and center of dilation here;

https://brainly.com/question/12162455

Answer:

3b (3a - 4b)

Step-by-step explanation:

Answer:

C

Step-by-step explanation:

9ab - 12b² ← factor out 3b from each term

= 3b(3a - 4b) → C

Answer:

To find the leading coefficient, first expand the function:

[tex]y= -(x+3)^{2} -5\\\\y=-(x^{2} +6x+9)-5\\\\y=-x^{2} -6x-9-5\\\\y=-x^{2} -6x-14[/tex]

The leading coefficient is the coefficient of the highest-order term, which, in this case, would be the -1 from -x².

To find the vertex: see image below

Vertex = (-3, -5)

Answer:

59.04°

58.31 inches

Step-by-step explanation:

The solution triangle is attached below :

Since we have a right angled triangle, we can apply trigonometry to obtain the angle ladder makes with the ground;

Let the angle = θ

Tanθ = opposite / Adjacent

Tanθ = 50/30

θ = tan^-1(50/30)

θ = 59.036°

θ = 59.04°

The length of ladder can be obtained using Pythagoras :

Length of ladder is the hypotenus :

Hence,

Hypotenus = √(adjacent² + opposite²)

Hypotenus = √(50² + 30²)

Hypotenus = √(2500 + 900)

Hypotenus = 58.309

Length of ladder = 58.31 inches

Answer:

59°

58.3 inches

Step-by-step explanation:

Here is the full question :

A ladder is placed 30 inches from a wall. It touches the wall at a height of 50 inches from the ground. The angle made by the ladder with the ground is degrees, and the length of the ladder is inches.

Please check the attached image for a diagram explaining this question

The angle the ladder makes with the ground is labelled x in the diagram

To find the value of x given the opposite and adjacent lengths, use tan

tan⁻¹ (opposite / adjacent)

tan⁻¹  (50 / 30)

tan⁻¹ 1.667

= 59°

the length of the ladder can be determined using Pythagoras theorem

The Pythagoras theorem : a² + b² = c²

where a = length

b = base

c =  hypotenuse

√(50² + 30²)

√(2500 + 900)

√3400

= 58.3 inches

Answer:

45 / 27 = 30 / 18 = x / 24

x = 40

Step-by-step explanation:

Hi there!

The question here states that the two polygons are similar

Polygons that are similar have similar side length ratios.

If we want to find a side length we must create a proportional relationship

We are already given a partial proportional relationship.

Which is...

45 / __ = __ / 18 = x / __

First let's fill in the blanks

The side that is corresponding to the side with a length of 45 has a length of 27. So it would be 45/27

The side that is corresponding to the side with a length of 18 has a length of 30. So it would be 30/18

The side corresponding to side labeled "x" has a length of 24. so it would be x/24

So we would have

45 / 27 = 30 / 18 = x / 24

Now let's find x

We only need 2 ratios ( the one including x of course, and the other one can either be 30/18 or 45/27)

30 / 18 = x / 24

Now let's solve for x

Cross multiply

30*24=720

18*x=18x

We now have 18x = 720

Divide both sides by 18

18x / 18 = x

720 / 18 = 40

x = 40

To check our answers we can see if the ratios are similar

If they are then we are correct

45/27 = 1.66

30/18 =1.66

40/24 = 1.66

They are all equivalent meaning that our answers are correct

Answer:

B

Step-by-step explanation:

27%=0.27 and sqrt(2)<2.75

Answer:

44.4

Step-by-step explanation:

Since we have a right triangle, we can use trig functions

sin theta = opp / hyp

sin x = 7/10

Taking the inverse sin of each side

sin^-1 (sin x) = sin^-1(7/10)

x = 44.427

Rounding to the nearest tenth

x = 44.4

Cot A=1/tan A=12/5

cos A= 12/13

sin A=5/13

Draw a right angled triangle

the hypotenuse is the longest side which is 13 using Pythagoras theorem

the side opposite the angle A is 5

the side closest to the angle A which is called the adjacent is 12

sinA =opp/hyp

cos A= adj/hyp

cotA =1/tanA=cos A/sinA

Note: Pythagoras theorem is

hyp²=opp²+adj²

Answer:

Step-by-step explanation:

[tex]tan \ A = \frac{5}{12}=\frac{opposite \ site}{adjacent \ side}[/tex]

hypotenuse² = (opposite side)² + (adjacent side)²

                      =  5² + 12²

                      = 25 + 144

                      = 169

hypotenuse = √169 = √13*13 = 13

[tex]Cot \ A = \frac{adjacent \ side}{opposite \ side}=\frac{12}{5}\\\\Cos \ A = \frac{adjacent \ side}{hypotenuse}=\frac{12}{13}\\\\Sin \ A = \frac{opposite \ side}{hypotenuse}=\frac{5}{13}[/tex]

Answer:

Step by Step Solution

More Icon

STEP

1

:

3

Simplify ——

x2

Equation at the end of step

1

:

3

((((2•(x2))-5x)-——)+2x)-3

x2

STEP

2

:

Equation at the end of step

2

:

3

(((2x2 - 5x) - ——) + 2x) - 3

x2

STEP

3

:

Rewriting the whole as an Equivalent Fraction

3.1 Subtracting a fraction from a whole

Rewrite the whole as a fraction using x2 as the denominator :

2x2 - 5x (2x2 - 5x) • x2

2x2 - 5x = ———————— = ———————————————

1 x2

Equivalent fraction : The fraction thus generated looks different but has the same value as the whole

Common denominator : The equivalent fraction and the other fraction involved in the calculation share the same denominator

STEP

4

:

Pulling out like terms

4.1 Pull out like factors :

2x2 - 5x = x • (2x - 5)

Adding fractions that have a common denominator :

4.2 Adding up the two equivalent fractions

Add the two equivalent fractions which now have a common denominator

Combine the numerators together, put the sum or difference over the common denominator then reduce to lowest terms if possible:

x • (2x-5) • x2 - (3) 2x4 - 5x3 - 3

————————————————————— = —————————————

x2 x2

Equation at the end of step

4

:

(2x4 - 5x3 - 3)

(——————————————— + 2x) - 3

x2

STEP

5

:

Rewriting the whole as an Equivalent Fraction :

5.1 Adding a whole to a fraction

Rewrite the whole as a fraction using x2 as the denominator :

2x 2x • x2

2x = —— = ———————

1 x2

Polynomial Roots Calculator :

5.2 Find roots (zeroes) of : F(x) = 2x4 - 5x3 - 3

Polynomial Roots Calculator is a set of methods aimed at finding values of x for which F(x)=0

Rational Roots Test is one of the above mentioned tools. It would only find Rational Roots that is numbers x which can be expressed as the quotient of two integers

Answer:

Slope-intercept form: [tex]y=-\frac{7}{4}x-\frac{19}{2}[/tex]

Point-slope-form: [tex]y-1=-\frac{7}{4}(x+6)[/tex]

Step-by-step explanation:

Hi there!

We want to find the equation of the line perpendicular to the line 4x-7y=2 that goes through (-6, 1) in slope-intercept form, as well as the point-slope form

Slope-intercept form is defined as y=mx+b, where m is the slope and b is the y intercept

Point-slope form is defined as [tex]y-y_1=m(x-x_1)[/tex], where m is the slope and [tex](x_1, y_1)[/tex] is a point

Meanwhile, perpendicular lines have slopes that are negative and reciprocal. When they are multiplied together, the result is -1

So let's find the slope of the line 4x-7y=2

The equation of the line is in standard form, which is ax+by=c, where a, b, and c are integer coefficients a is non-negative, and a and b aren't 0

So let's find the slope of the line 4x-7y=2

One way to do that is to convert the equation of the line from standard form to slope-intercept form

Our goal is to isolate y onto one side

Subtract 4x from both sides

-7y=-4x+2

Divide both sides by -7

y=[tex]\frac{4}{7}x-\frac{2}{7}[/tex]

So the slope of the line 4x-7y=2 is [tex]\frac{4}{7}[/tex]

Now, we need to find the slope of the line perpendicular to it

Use this formula: [tex]m_1*m_2=-1[/tex]

[tex]m_1[/tex] in this case is [tex]\frac{4}{7}[/tex]

[tex]\frac{4}{7}m_2=-1[/tex]

Multiply both sides by [tex]\frac{7}{4}[/tex]

m=[tex]-\frac{7}{4}[/tex]

Let's see the equation of the perpendicular line so far in slope-intercept form:

y=[tex]\frac{-7}{4}x[/tex]+b

We need to find b now

The equation of the line passes through (-6,1), so we can use it to solve for b.

Substitute -6 as x and 1 as y

[tex]1=-\frac{7}{4}*-6+b[/tex]

Now multiply

1=[tex]\frac{42}{4}+b[/tex]

Subtract 42/4 from both sides to isolate b

-19/2=b

Substitute -19/2 as b into the equation

The equation in slope-intercept form y=[tex]\frac{-7}{4}x-\frac{19}{2}[/tex]

Now, here's the equation in point-slope form

Recall that the slope is [tex]\frac{-7}{4}[/tex] , our point is (-6, 1), and point-slope form is [tex]y-y_1=m(x-x_1)[/tex]

Let's label the value of everything to avoid any confusion

[tex]m=-\frac{7}{4} \\x_1=-6\\y_1=1[/tex]

Now substitute those values into the equation

[tex]y-1=-\frac{7}{4}(x--6)[/tex]

We can simplify the x--6 to x+6

[tex]y-1=-\frac{7}{4}(x+6)[/tex]

Hope this helps!

Answer:

3−42+7+16

Step-by-step explanation:

if its simplify

Answer:

B

Step-by-step explanation:

half × base × height

height × length

Answer: B

Step-by-step explanation:

Triangle)

25 - 7 = 18

[tex]A=\frac{1}{2}(b)(h)\\A=\frac{1}{2}(18)(17)\\A=153cm^2[/tex]

Rectangle)

[tex]A=b(h)\\A=7(17) = 119cm^2[/tex]

Total)

[tex]153+119=272 cm^2[/tex]

Step-by-step explanation:

From both the cases we can say that √n is either a natural number or an irrational number. Hence the correct option is (d)Either a natural number or an irrational number. Note: Before solving this type of question we should have proper knowledge of natural numbers, rational numbers and irrational numbers.

Answer:

0.0125x or x/80

Step-by-step explanation:

Salary: x dollars per year

To find the pay per month, we divide the annual pay by 12.

The monthly pay is x/12

15% of the first month's salary is

15% of x/12 = 0.15 * x/12 = 0.0125x = x/80

Answer: 0.0125x

Answer:

[tex]y = - \frac{3}{2} x + 1[/tex]

Step-by-step explanation:

Slope -intercept form: y= mx +c, where m is the slope and c is the y-intercept.

Parallel lines have the same slope. Let's find the slope of the given line.

Given points: (-2, 0) and (0, -3)

[tex]\boxed{slope = \frac{y1 - y2}{x1 - x2} }[/tex]

slope of given line

[tex] = \frac{0 - ( - 3)}{ - 2 - 0} [/tex]

[tex] = \frac{0 + 3}{ - 2} [/tex]

[tex] = - \frac{3}{2} [/tex]

[tex]y = - \frac{3}{2} x + c[/tex]

Given that the y- intercept is 1, c= 1.

[tex]y = - \frac{3}{2} x + 1[/tex]

Answer:

I start to say from my name,age,family,qualifications and etc.

Answer:

In your response, do the following:

Begin by rereading the job description. Take note of the required skills that you have, and identify recent stories that demonstrate them . Ideally, you should draw primarily from recent professional experience; however, volunteer work can also support your narrative while demonstrating a commitment to your community.

Is it a more senior role? If so, explain how you are taking on more responsibilities in your current position. If you are making a lateral transition to a role with different skills, describe how your current skills translate into the new position.

When you start building the script of each example, focus on details and outcomes that you can quantify if possible. For example, stating that you “improved customer service” is less impactful than “increased customer service response rates each quarter by 10–15%.” If you don’t have the exact information, estimate a realistic value.

Since the “Tell me about yourself” interview question is about getting to know you, it’s a good idea to share your personality with your interviewer—but not personal details. You may want to briefly mention hobbies that demonstrate intellectual development and/or community engagement (e.g., reading, music, sports league, volunteering) or those that showcase personal discipline and achievement (e.g., learning a new skill, training for a half marathon). Discussing personal interests is a good way to wrap up your response while maintaining a professional tone.

For your response to be clear and concise, you’ll want to make sure you organize your answer following a format or formula. There are two common formulas you may consider:

Both of these formulas work for your response, but you may choose one over the other based on the roles from your experience that are most relevant to the position you're interviewing for. For example, if your most recent role highlights many of the skills and qualifications that are required for the role you’re interviewing with, you may want to lead with the present. However, if you're making a career transition and your past experience is more closely related to the role than your current position, you may want to lead with your past.

Answer:

A. Angle Y is a right angle.

B. The measure of angle Z is 45°.

E. The perpendicular bisector of creates two smaller isosceles triangles.

Step-by-step explanation:

Let x represent the measures of base angles X and Z. 2x is the measure of vertex angle Y.

x + x + 2x = 180°

x = 45°

2x = m∠Y = 90°

The triangle is an isosceles right triangle which has base angles of 45°.

The perpendicular bisector of line XZ creates two smaller isosceles triangles with acute angles of 45°

Answer:

The answers are A B E

Step-by-step explanation:

Answer:

4096

Step-by-step explanation:

8^6÷8^2

First step is to solve the exponents

8 to the power of 6 is 262144

8 to the power of 2 is 64

Then divide 262144 by 64 : 4096

Answer:

it is a law of axponent that is a to the power m divided by a to the power n = a to the power m-n

so 8 to the power 6-2

= 8 to the power 4

that will be 4,096

Answer:

1. a. 2

b. -½

c. y - 3 = -½(x - 8) => point-slope form

y = -½x + 7 => slope-intercept form

2. a. -1

b. 1

c. y - 5 = 1(x - 3) => point-slope form

y = x + 2 => slope-intercept form

Step-by-step explanation:

1. (8, 3) and (10, 7):

a. The gradient for the line joining the points:

Gradient = [tex] \frac{y_2 - y_1}{x_2 - x_1} [/tex]

Let,

[tex] (8, 3) = (x_1, y_1) [/tex]

[tex] (10, 7) = (x_2, y_2) [/tex]

Plug in the values

Gradient = [tex] \frac{7 - 3}{10 - 8} [/tex]

Gradient = [tex] \frac{4}{2} [/tex]

Gradient = 2

b. The gradient of the line perpendicular to this line = the negative reciprocal of 2

Negative reciprocal of 2 = -½

c. The equation of perpendicular line if it passes through the first point, (8, 3):

Equation of the perpendicular line in point-slope form can be expressed as y - b = m(x - a).

Where,

(a, b) = (8, 3)

Slope (m) = -½

Substitute (a, b) = (8, 3), and m = -½ into the point-slope equation, y - b = m(x - a).

Thus:

y - 3 = -½(x - 8) => point-slope form

We cam also express the equation of the perpendicular line in slope-intercept form by rewriting y - 3 = -½(x - 8) in the form of y = mx + b:

Thus:

y - 3 = -½(x - 8)

y - 3 = -½x + 4

y - 3 + 3 = -½x + 4 + 3

y = -½x + 7

2. (3, 5) and (4, 4):

a. The gradient for the line joining the points:

Gradient = [tex] \frac{y_2 - y_1}{x_2 - x_1} [/tex]

Let,

[tex] (3, 5) = (x_1, y_1) [/tex]

[tex] (4, 4) = (x_2, y_2) [/tex]

Plug in the values

Gradient = [tex] \frac{4 - 5}{4 - 3} [/tex]

Gradient = [tex] \frac{-1}{1} [/tex]

Gradient = -1

b. The gradient of the line perpendicular to this line = the negative reciprocal of -1

Negative reciprocal of -1 = 1

c. The equation of perpendicular line if it passes through the first point, (3, 5):

Equation of the perpendicular line in point-slope form can be expressed as y - b = m(x - a).

Where,

(a, b) = (3, 5)

Slope (m) = 1

Substitute (a, b) = (3, 5), and m = 1 into the point-slope equation, y - b = m(x - a).

Thus:

y - 5 = 1(x - 3) => point-slope form

We can also express the equation of the perpendicular line in slope-intercept form by rewriting y - 5 = 1(x - 3) in the form of y = mx + b:

Thus:

y - 5 = 1(x - 3)

y - 5 = x - 3

y - 5 + 5 = x - 3 + 5

y = x + 2

Answer:

[tex]1.6^{4}[/tex]

Step-by-step explanation:

1.6 is multiplied by itself 4 times. This is represented in exponential form as

[tex]1.6^{4}[/tex]

Answer:

4x+y=-32

Step-by-step explanation:

given,

slope (m) = -4

point: (-8,0)

as we know the slope intercept form of the line is, y=mx+b, b=y-mx, now we put x=-8, y=0 to find b [because the point is given (-8,0) so it must satisfy the equation]

so,

b = 0-(-4)×(-8) = -32

y=mx+b

or, y=-4x-32

or, 4x+y=-32

(this is the standard form of the line)

Using the equation y - y1 = m(x - x1)

y - 0 = -4(x - (-8))

y = -4(x + 8)

y = -4x - 32

Answer:

[tex]{ \tt{1 \: mg = 1 \times {10}^{ - 3} \: g}} \\ { \tt{75 \: mg = (75 \times 1 \times {10}^{ - 3} ) \: g}} \\ { \bf{ = 75 \times 10 {}^{ - 3} \: grams}} \\ { \bf{ = 0.075 \: grams}}[/tex]

Answer:

C

Step-by-step explanation: