Answer:
This equation is not balanced because you don't have the same amount of each element on each side of the chemical reaction. The balanced equation is:
2 S + 3 ⇒ 2
The law of conservation of matter states that since no atom can be created or destroyed in a chemical reaction, the number of atoms that are present in the reagents has to be equal to the number of atoms present in the products.
Then, you must balance the chemical equation. For that, you must first look at the subscripts next to each atom to find the number of atoms in the equation. If the same atom appears in more than one molecule, you must add its amounts.
The coefficients located in front of each molecule indicate the amount of each molecule for the reaction. This coefficient can be modified to balance the equation, just as you should never alter the subscripts.
By multiplying the coefficient mentioned by the subscript, you get the amount of each element present in the reaction.
Then, taking into account all of the above, you can determine the amount of elements on each side of the equation:
Left side: 1 sulfur S and 6 oxygen O (coefficient 3 multiplied by sub-index 2)
Right side: 1 sulfur S and 3 oxygen O (subindice value)
As you can see, you have the same amount of sulfur on both sides of the equation but the amount of oxygen is different. This indicates that the chemical equation is not balanced. To balance it, as the amount of sulfur is the same, the amount of oxygen must be balanced, which is different on each side of the reaction.
A simple way is to balance the equation is to multiply the product by 2, that is, add a coefficient 2 in front of the SO3 molecule, the reaction being as follows:
S + 3 ⇒ 2
Now the amount of elements on each side of the equation is:
Left side: 1 sulfur S and 6 oxygen O (coefficient 3 multiplied by subindice 2)
Right side: 2 sulfur S and 6 oxygen O (coefficient 2 multiplied by subindice 3)
The oxygen is now balanced, but the amount of sulfur on both sides of the reaction varies. To balance the quantities of sulfur, as now on the right side you have an amount of 2, you can add the coefficient to sulfur. The chemical equation is as follows:
2 S + 3 ⇒ 2
Now the amount of elements on each side of the equation is:
Left side: 2 sulfur S and 6 oxygen O (coefficient 3 multiplied by subindice 2)
Right side: 2 sulfur S and 6 oxygen O (coefficient 2 multiplied by subindice 3)
Finally you have the same amount of sulfur and oxygen on both sides of the reaction. So the chemical equation is finally balanced.
Explanation:
Brainliest please?
Answer:
it is balenced beacuse both sides have the same ammount of particals
Explanation:
A solution is made by dissolving 0.0503 kg of biphenyl (C12H10) in
350.0 mL of benzene (C6H6).
What would be the osmotic pressure (in atm) of this solution at 40.0
°C? (The density of benzene is 0.877 g/mL.)
Answer:
Letter A po
Explanation:
yanffdddddd
What is the molar mass of the anhydrous compound? Answer using four significant figures.
36.02 g/mol
120.15 g/mol
156.12 g/mol
Answer:
120.15
Explanation:
ta edg
Answer:
120.15
Explanation:
edg 2021
The identity of the element shown in the model above is determined by the number of -
Answer:
The number of protons or electrons in its atomic structure
Explanation:
Elements are substances which constitute the building block of matter. The smallest particles of elements that can ever exist are known as atoms. Atoms of different elements are different in their structure properties. This difference is due to to the number of sub-atomic particles present in the atom of each element.
The three sub-atomicparticles are protons, neutrons and electrons. Protons and neutrons are present in the nucleus of an atom, while the electrons revolve around the nucleus in orbits. The identity of each element is determined by the number of protons present in the atomic nucleus of that element. This is known as the atomic number of that element. For neutral atoms, the proton number is equal to electron number.
For the given element, the electron and proton number are respectively 4, therefore, the atomic number of the element is 4. The element with atomic number 4 is Beryllium.
Arrange the following elements in order from lowest to highest first ionization energy : AI , Ar, Cs, Na .
Answer:francium
The first ionization energy varies in a predictable way across the periodic table. The ionization energy decreases from top to bottom in groups, and increases from left to right across a period. Thus, helium has the largest first ionization energy, while francium has one of the lowest.
Explanation:
The least measure of the energy needed to remove the loosely bound electron of an atom or a molecule is called ionization energy.
The correct order from lowest to highest first ionization energy is:
CsNaAlArThis can be explained as:
(Cs) Caesium will have the lowest energy because in the periodic table it comes in the same group as (Na) sodium. In the group, from top to bottom the ionization energy decreases.(Al) aluminium and (Ar) argon lies in the same period.In a period from left to right the ionization energy increases.Therefore, Cesium will have the least ionization energy as compared to sodium, aluminium and argon.
To know more about ionization energy follow the link:
https://brainly.com/question/2571722
Someone please help will mark as brainliest
Answer:
PET works by using a scanning device (a machine with a large hole at its center) to detect photons (subatomic particles) emitted by a radionuclide in the organ or tissue being examined.
Newer technology combines PET and CT into one scanner, known as PET/CT. PET/CT shows particular promise in the diagnosis and treatment of lung cancer, evaluating epilepsy, Alzheimer's disease and coronary artery disease.
Explanation: Most Brainliest Please
What is the mass and volume of the nucleus relative to the size of the atom?
Answer:
The atom with the smallest mass is the hydrogen atom; its mass is about 10-27 kg. The masses of other atoms go up to about 200 times this. The nucleus of an atom is about 10-15 m in size; this means it is about 10-5 (or 1/100,000) of the size of the whole atom.
PLEASE HELP ASAP!!
What is the purpose of a unit conversion?
O
A. To change an amount in one unit to its equivalent amount in
another unit
B. To express a scientific expression in a general form all scientists
can understand
C. To express the amount of something in terms of its number of
smallest units
D. To keep track of the units associated with a number throughout an
equation
Answer:
A
Explanation:
A conversion factor is used to change the units of a measured quantity without changing its value.
Unit conversion is very important because the rest of the world other than three contries uses the metric system. So, converting unitsis important in science because it uses the metric system. The metric system are measurements like cm, m, l, mL, etc.
Double bonds are formed when atoms share four electrons. true or false
Answer:
That's is true maybe I'm not sure check your book
I NEED HELPPPPPP ASAP
Answer:
1. Reactants collect in chloroplasts
2. A chemical reaction occurs
3. Products result as food and water
The diagram below shows a longitudinal wave at one instant in its motion. Each oval represents a particle acted on by the energy of the wave as it moves from left to right.
Which line on the diagram indicates a region of rarefaction?
Answer: It is the middle one on the bottom
Explanation:
trust me i just did this question
Theme parks can snap a crystal clear picture of you on a roller coaster at 70 mph, but bank cameras can't get a clear shot of a robber standing still.
bruh.
Answer:
I know right
Explanation:
Hiiiiiiiiiiiiiiiiiii
What is true of both galvanic and electrolytic cells?
A. Reduction happens at the cathode.
B. They are spontaneous. .
C. They are nonspontaneous.
D. Oxidation happens at the cathode.
Answer:
reduction happens at the cathode
Explanation:
Just took the test.
Reduction happens at the cathode. Hence, option A is correct.
What is an electrolytic cell?An electrolytic cell converts electrical energy into chemical energy or vice versa.
Oxidation-reduction reactions are balanced by two half overall chemical equations into an oxidation equation and a reduction equation.
Hence, reduction happens at the cathode in both galvanic and electrolytic cells.
Learn more about electrolytic cells here:
brainly.com/question/4030224
#SPJ2
What will a medium mass star become at the very end of its life cycle
What do radio waves and microwaves have in common?
O Both have shorter wavelengths than visible light
O Both are at the side of the spectrum that has the highest frequency
O Both have lower frequencies than visible light
O Both have radiant energy than visible light.
Answer:
The last one
Explanation:
What is the percent of SO2 in H2SO4?
Help Please
The percent of SO₂ in H₂SO₄ : 65.3%
Further explanationProust states the Comparative Law that compounds are formed from elements with the same Mass Comparison so that compounds have a fixed composition of elements
%Mass A in AxBy =
[tex]\tt \dfrac{x.Ar~A}{MW~A_xB_y}\times 100\%[/tex]
For SO₂ in H₂SO₄ :
MW SO₂ = 32 + 2.16=64 g/mol
MW H₂SO₄ =2.1+32+4.16=98 g/mol
The percent of SO₂ :
[tex]\tt \dfrac{64}{98}\times 100\%=65.3\%[/tex]
I have a homework and I need help please.
Answer:
yeah we cant see it
Explanation:
Consider the following reaction: 3Fe(s) + 4H₂O(g) ➞ Fe₃O₄(s) + 4H₂(g). To answer the following question: "How many moles of hot water vapor (steam) must react to produce 275 g of Fe₃O₄?" How many steps will it take to get the answer? *
4 points
1
2
3
4
calculate the energy required to vaporize a chunk of ice at -25°C with the mass of 12.5kg
Compared to ionic compounds, molecular compounds generally have
A. stronger chemical bonds.
B. poor conductivity.
C. a high melting point.
D. lower densities.
How many valence electrons does this atom have? (Urgent)
Answer:
It only has 7 valence electrons because there are seven electrons in the highest orbital.
Explanation:
true or false, during a change of state, the thermal energy gained or lost by a material changes the kinetic energy of its particles
Answer:
true..... not false okkkkk
Which of these statements is TRUE about a nonrenewable energy resource? A. Its supply will never run out. B. It is used up faster than it is made. C. It cannot be burned as fuel. D. It can be replaced faster than it is used.
Which choices are layers of the atmosphere?
Select the five correct answers.
Thermosphere
Meteorosphere
Croposphere
Stratosphere
Mesosphere
Danosphere
Exosphere
Troposphere
Answer:
Mesosphere
Stratosphere
Thermosphere
Troposphere
Exosphere
Explanation:
The exosphere refers to the farthest region of the atmosphere that gradually fades into space.
The troposphere is the lowest layer of atmosphere. It is the layer where weather changes occur.
The thermosphere is right above the mesosphere but just below the exosphere. It is the layer where photoionization/photodissociation of molecules occurs thereby creating ions. This largely owes to interaction of molecules in this layer with ultraviolet radiation.
The stratosphere is composed of gases. Prominent among them is ozone which serves as a blanket against the sun's ionizing radiation.
The mesosphere lies above the stratosphere but just below the thermosphere. Temperature decreases steadily with height in the mesosphere.
Choose the molecule with the strongest internal bond, (intra-, not intermolecular bond)
Answer:
A
Explanation:
The molecule with the strongest intramolecular bond is HF. Hydrogen fluoride is the answer due to the strong and highly electronegative nature of Fluorine.
Fluorine is the most electronegative element in nature. When it combines with other substances, due to its electronegative property, it draws most of the electrons closest to itself in the bond. This tendency and ability makes the shared electrons closer the fluorine in the bond. The strong polarization that ensues confers a very strong covalent bond pair on the bond formed.The molecule with the strongest internal bond is HF and the correct option is option A.
An intramolecular bond, also known as a chemical bond, refers to the attractive forces that hold atoms together within a molecule. It involves the sharing, transferring, or rearrangement of electrons between atoms to achieve a more stable configuration.
There are three primary types of intramolecular bonds:
Covalent Bond: In a covalent bond, atoms share electrons to achieve a more stable electron configuration. This bond is formed between nonmetal atoms.Ionic Bond: An ionic bond is formed when there is a complete transfer of electrons from one atom to another. It involves the attraction between positively and negatively charged ions. Ionic bonds typically occur between a metal and a nonmetal.Metallic Bond: Metallic bonding occurs in metals and is characterized by a "sea of electrons" in which the valence electrons are delocalized and free to move within the metal lattice. This allows metals to conduct electricity and exhibit other unique properties.Thus, the ideal selection is option A.
Learn more about Intramolecular bond, here:
https://brainly.com/question/33442205
#SPJ6
Aqueous solutions of sodium carbonate and magnesium chlorate are mixed
Explanation:
You're mixing magnesium nitrate, Mg(NO3)2 , and sodium carbonate, Na2CO3 , two soluble ionic compounds that dissociate completely in aqueous solution to form cations and anions.
please help me solve step by step!!
A motorcycle and its rider have a combined mass of 1250 kg. They travel inside
a vertical loop with a radius of 7.13 m. At the lowest point, the speed is 22.7 m/s. How much force does the track exert on the motorcycle, at this lowest
point, to keep the rider in the loop?
I need to someone to explain the whole being of Chemistry. I do not understand a single thing, nothing makes sense to me. Literally, I'm going to fail this class because I do NOT understand a single thing taught to me. Maybe it's because I was mistakenly put into Chemistry Pre AP instead of on level but it's so hard and- I just do not get it.
Answer:
Explanation:
In Pre-AP Chemistry, the development of models to explain their macroscopic observations is a primary means through which students develop an understanding of the molecular world.
You will be forced to think and apply concepts to new situations, and even derive your own theories from application. This is excellent preparation for the higher levels of thinking required in college.
Chemistry, the science that deals with the properties, composition, and structure of substances (defined as elements and compounds), the transformations they undergo, and the energy that is released or absorbed during these processes.
Which is greater 50 degree celcius or 50 degree fahrenheit?with solution plz.....
Answer: 50 degrees Celsius is hotter than 50 degrees F. 50 degrees Celsius is half way between freezing and boiling
Find the percent of water in Zn3(PO4)2 x 7H2O
Answer:
24.66%
Explanation:
To find the percent of water (H2O) in the following compound: Zn3(PO4)2. 7H2O
The atomic mass of the elements are as follows:
Zn = 65g/mol
P = 31g/mol
O = 16g/mol
H = 1g/mol
Hence, molar mass of the compound is as follows:
65(3) + {31 + 16(4)} 2 + 7{1(2) + 16}
195 + 95(2) + 7(18)
195 + 190 + 126
511g/mol
Molar mass of 7H2O
= 7(18)
= 126g/mol
Hence, the percent of H2O in the compound is:
Molar Mass of 7H2O/molar mass of compound × 100
= 126/511 × 100
= 0.2466 × 100
= 24.66%
Could a person at the South Pole see the North Star? Explain.
Answer:
Yes
Explanation:
Because yes
Answer:
Yes, North is a direction and the south pole is a place so yes you can see the north star from the south pole
Explanation:
