Answer:
0.3kg
Explanation:
The bottle slides down the hill and is moving at a velocity of 14 meters/second the instant it hits the ground. The vertical height from where Jeff dropped the bottle is meters. Ignore friction, and use , PE = m × g × h, and g = 9.8 m/s2.
Answer:
10 m
Explanation:
From the question given above, the following data were obtained:
Velocity (v) = 14 m/s
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) =?
Next, we shall determine the energy. This can be obtained as follow:
Velocity (v) = 14 m/s
Kinetic Energy (KE) =?
KE = ½mv²
KE = ½ × m × 14²
KE = ½ × m × 196
KE = m × 98
Finally, we shall determine the height. This can be obtained as follow:
Kinetic energy (KE) = m × 98
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) =?
Since the object is falling from a particular height,
Potential energy (PE) = kinetic energy (KE)
PE = mgh
KE = m × 98
m × 9.8 × h = m × 98
Divide both side by m × 9.8
h = m × 98 / m × 9.8
h = 10 m
Thus, the bottle was dropped from a height of 10 m
How many ATOMS of boron are present in 3.61 grams of boron trifluoride ?
Answer:
To determine the number of atoms of Boron that are present within 3.61 grams of Boron Trifluoride, it would be best to convert the grams to moles of the compound and then after that use the Avogadro's number to determine the number of molecules and then use the 1 to 3 ratio to determine the total number of Boron atoms.
Diego is trying to lift a piano to the second floor of his house. Diego uses a pulley system and gives a big lift to the piano.The piano moves upward, then stops, and then it starts to fall to the ground. (The direction of the force of gravity is negative.) Which list best describes the forces on the piano in the proper order
Answer:
positive force → balanced force → negative force
Explanation:
np
Answer:
positive force → balanced force → negative force
Explanation:
:)))
How many grams of ammonia can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm?
Answer: The mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.
Explanation:
Given: Volume = 450 L
Temperature = 450 K
Pressure = 300 atm
The reaction equation is as follows.
[tex]N_{2} + 3H_{2} \rightarrow 2NH_{3}[/tex]
Here, 1 mole of nitrogen reacts to give 2 moles of ammonia.
From the given data, moles of nitrogen are calculated as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into the above formula as follows.
[tex]PV = nRT\\300 atm \times 450 L = n \times 0.0821 L atm/mol K \times 450 K\\n = \frac{300 atm \times 450 L}{0.0821 L atm/mol K \times 450 K}\\= \frac{135000}{36.945}\\= 3654.08 mol[/tex]
For 3654.08 moles of nitrogen, the moles of ammonia produced is as follows.
[tex]2 \times 3654.08 mol\\= 7308.16 mol[/tex]
Therefore, mass of ammonia (molar mass = 17.03 g/mol) is calculated as follows.
[tex]Moles = \frac{mass}{molarmass}\\7308.16 mol = \frac{mass}{17.03 g/mol}\\mass = 124457.96 g[/tex]
Thus, we can conclude that the mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.
A gas is put into a cosed container.
The container and the gas inside it are heated.
What will happen to the pressure inside the container?
Answer:
When gases in containers are heated, their molecules increase in average speed. This means that they exert a greater force when they collide with the container walls, and also collide with the walls more frequently. The gas is therefore under greater pressure when its temperature is higher.
what is the application of chemistry
Answer:
Chemistry plays an important and useful role towards the development and growth of a number of industries. This includes industries like glass, cement, paper, textile, leather, dye etc. We also see huge applications of chemistry in industries like paints, pigments, petroleum, sugar, plastics, Pharmaceuticals.
What element has 9 electrons, and 11 neutrons?
fluorineelement has 9 electrons, and 11 neutrons
Which statement is not true about the periodic table?
A. Elements in the same family have the same number of protons.
B. An element of the table is represented by a box with a symbol in it.
C. Elements in the same period of the periodic table have the same
number of electron shells.
D. It is organized by atomic number.
Elements in the same family have the same number of protons. This statement is not true about the periodic table. Therefore, option A is correct.
What is periodic table ?The chemical elements are arranged in rows and columns in the periodic table, sometimes referred to as the periodic table of the elements. It is frequently used in physics, chemistry, and other sciences and is frequently regarded as a symbol of chemistry.
The table can be used by scientists to anticipate chemical reactions, study trends in the periodic properties of certain elements, and speculate on the properties of yet-to-be-discovered elements. The elements are arranged in the contemporary periodic table according to their atomic numbers and periodic characteristics.
The periodic table has changed to represent more than 150 years of chemical and physics research and development.
Thus, option A is correct.
To learn more about the periodic table, follow the link;
https://brainly.com/question/11155928
#SPJ2
how many distinct monochlorinated products can result when methylcyclohexane is subjected to free radical chlorination under UV light
Answer:
How many distinct monochlorinated products can result when methylcyclohexane is subjected to free radical chlorination under UV light.
Explanation:
Consider 1-methylcyclohexane:
Its structure is shown below:
It has primary [tex]1^o[/tex], secondary [tex]2^o[/tex]and tertiary [tex]3^o[/tex] carbons as shown in the image.
So, the following mono chlorinated product will be formed.
_______organisma consist of only one cell and _________ organisms consist of many cells
Answer:
Unicellular organisms consist of only one cell and multicellular organisms consist of many cell.
Explanation:
Living things made up of a cell are called unicellular beings. They are very small and simple. In other words, unicellular organisms are those that are formed only by a single cell in which all the vital functions necessary for life are produced. For this reason, they are mostly microscopic organisms. Examples of unicellular organisms are viruses or bacteria.
Multicellular organisms are made up of a large number of cells. They present, therefore, a greater complexity than unicellular organisms in terms of the functions they develop. All current multicellular organisms come from a single cell, that is, they begin their life being unicellular. That is, they are formed from a zygote. Some examples of multicellular organisms are mammals, fungi, and mosses.
So, unicellular organisms consist of only one cell and multicellular organisms consist of many cell.
Cotton plant is mainly harvested at flowering stage true false
if drop a watermelon from the top of one of the tower dorms at CSU, and it takes 3.34 seconds to hit the ground, calculate how tall the building is in meters and then convert into feet.
Answer:
179.5 feet
Explanation:
54.718 m converted to 179.5 feet.
Which redox reaction would most likely occur if silver and zinc metal were added to a solution that contained silver and zinc ions?
Answer:
D. Zn²⁺ + 2Ag → Zn + 2Ag⁺
Explanation:
On the reduction potential chart, we have that silver ion Ag⁺ is a stronger oxidizing agent than, zinc, Zn, which is a reducing reducing agent the compared to silver
Therefore, the redox reaction that will occur is that the zinc, Zn, will be oxidized to Zn²⁺ ion, while the silver, Ag²⁺ ion will be reduced to silver deposits Ag, therefore, the zinc will displace the silver in the solution containing silver and zinc ions because zinc is higher than silver in the reactivity series
The reduction potential Zn → Zn²⁺ + 2e⁻ = +0.76
The reduction potential for Ag⁺ + e⁻ → Ag = +0.8
Therefore, given that redox reactions are reversible, we get the following likely redux reaction;
Zn(s) + 2Ag⁺(aq) ⇄ 2Ag(s) + Zn²⁺(aq)
Therefore, from the given options;
Zn²⁺(aq) + 2Ag(s) → Zn(s) + 2Ag⁺(aq) is the reaction most likely to occur.
Which best describes a swimming pool?
A.
It is a solute.
• B.
It IS
solvent.
C.
It is solution.
D.
It is a reactant.
•
E.
It is a product.
Answer:
Swimming pool is an example of solution
Explanation:
It has water (solvent) and dissolve ion (solute)
Answer:
it is a solution
Explanation:
the combining of (water and Cl and other pool chemicals) make it a solution.
How many molecular of H2O and O2 are present in 8.5g of H2O2 ?
2H2O+O2--->2H2O2
8.5 gm H2O2=0.25 mole
hence H2O is also 0.25 mole i.e.4.5 gm
O2is 0.125 mole i.e.4 gm
How does the alcohol enter the body? Describe the process. Where does most of the absorption take place?
Explanation: Once swallowed, a drink enters the stomach and small intestine, where small blood vessels carry it to the bloodstream. Approximately 20% of alcohol is absorbed through the stomach and most of the remaining 80% is absorbed through the small intestine.
every action produces an equal and opposite -- ---------- when one object exterts a force on another object,the second object pushes back with the same amount of---------
someone knows the answer
Calculate the average atomic mass for element X.
(Please HELP)
help sdfghrthfbfdve aahhhhhhhh
The combination of ions most likely to produce a precipitate is Group of answer choices Mg2 and C2H3O2-. Fe3 and OH-. Li and PO43-. Pb2 and NO3-. NH4 and SO42-.
Answer:
The combination of ions most likely to produce a precipitate is a group of answer choices:
lead nitrate soluble in water
Mg2+ and C2H3O2-.
Fe3+ and OH-.
Li+ and PO43-.
Pb2+ and NO3-.
NH4+ and SO42-.
Explanation:
Among the given options,
magnesium acetate, lithium phosphate, lead nitrate, ammonium sulfate are soluble in water.
The only one which is insoluble in water is [tex]Fe^3+[/tex] and [tex]OH^-[/tex] combination.
[tex]Fe(OH)_3[/tex] is insoluble in water. It forms a precipitate.
5.34x10 to the 27th power molecules of sulfur hexafluoride to moles of sulfur hexafluoride
Answer:
8.87 × 10³ moles.
Explanation:
To convert number of molecules of sulfur hexafluoride (SF6) to moles (n), we divide by Avogadro's number (6.02 × 10²³)
That is; n = N ÷ nA
According to the question, 5.34 x 10^27 molecules of SF6 was given in this question. Hence, the number of moles it contains is given as:
n = 5.34 x 10^27 ÷ 6.02 × 10²³
n = 5.34/6.02 × 10^ (27-23)
n = 0.887 × 10⁴
n = 8.87 × 10³ moles.
 Help ASAP only right answers only no spam don’t answer if you don’t know
i know the answer is a theory
please provide is matter about us pure all NCERT questions and answers
Answer:
I hope that's what u were lookong for :))
Explanation:
1. Which of the following species exhibit tetrahedral geometry?
a. CCl4 b. PCI5 c. NH3 d. CO2
2. Which statement correctly describes the Valence Shell Electron Pair Repulsion (VSEPR) Theory? The valence electron pairs are__________.
a. The valence electron pairs are given by the group number in the periodic table.
b. The valence electron pairs are the outermost electrons of the atom that areinvolved in the bonding.
c. The valence electron pairs repel one another and tend to stay as far apart aspossible.
d. The valence electron pairs are the lone pairs of the atom.
3. Which of the following statements about resonance is TRUE?
I. Resonance hybrids occur because a compound changes back and forth between two or more resonancestructures
II. Resonance structures differ in the arrangement of electrons but not in the arrangement of atoms.
III. Resonance hybrids contain delocalized electrons.
IV. Resonance structures for a given compound always contribute equally to the resonance hybrid.
V. Resonance structures occur when there are two or more valid Lewis structures for a given compound.
VI. Resonance hybrids are a composite of resonance structures.
a.I, II, V, VI
b. II, III, IV, VI
c. II, III, V, VI
d. II, IV, V, VI
4. How many resonance forms will nitrate ion (NO3) have?
a. - 1 b. 1 c. 2 d. 3
5. What is the first noble gas?
a. Xenon b. Radon c. Helium d. Krypton
6. What is the principle used for filling of atomic orbitals?
a. Azimithual Principle
b. Hund's Principle
c. Pauling's Exclusion Principle
d. Aufbau Principle
7. How many electrons can "m" shell accommodate?
a. 16 b. 17 c. 18 d. 19
8. What number of shells used for the accommodation of electrons in an atom? a. one b. two c. three d. four
9. What distribution does the electron configuration describe?
a. protons
b. neutrons
c. electrons
d. ions
10. How many total electrons can the "p" orbitals hold?
a. 3 b. 1 c. 7 d. 6
11. Who are the founding fathers of Quantum Mechanics?
a. Werner Karl Heisenberg
b. Isaac Newton
c. Erwin Schrodinger
d. a and c
12. There are _types of quantum numbers.
a. 2 b. 4 c. 5 d. 7
13. Which of the following elements can only form one bond in a Lewis structure? a. H b. O c. Al d. N
14. Which rule states that electron will go into empty orbitals of the same energy before entering into an orbital with an electron present?
a. Hand's rule
b. Hund's rule
c. Pauli Exclusion Principle
d. Aufbau Principle
15. What is the definition of diamagnetic atom?
a. An atom where all of the electrons are paired
b. An atom where some of the electrons are paired.
c. An atom where none of the electrons are paired.
d. An atom attracted to a magnetic field.
Answer:
a
Explanation:
Its because ammonium has thee hydrogen atoms
describe the formation of ionic bonds in potassium chloride compound (5 marks)
Answer:
When the two atoms are in contact, potassium readily transfers its outer electron to chlorine which readily accepts it, resulting in both atoms achieving a state of eight outermost electrons. With this electron transfer, the ionic bond in KCl is formed.
Select the structure that corresponds
to the name:
decanoic acid
COOH
A.
B. CH3(CH2)7COOH
C. both
Answer:
b
Explanation:
Molecular formula of Decanoic Acid is C₁₀H₂₀O₂ therefore Option A is the right answer.
What is Decanoic Acid ?Decanoic Acid is a C10 , straight chain , saturated fatty acid . Its general formula is C₁₀H₂₀O₂ .
In the first option we can see a straight chain , saturated fatty acid and the molecular formula is also same as decanoic acid .
In second option the molecular formula is C₉H₁₈O₂ which is not same as Decanoic Acid.
Hence option A is the right answer.
To know more about Decanoic Acid;
https://brainly.com/question/8729762
#SPJ2
Balance the equation of. _C + _O2 -- _CO
Explanation:
2C +O2 = 2CO
this will be the answer
All light waves can be described in terms of their speed, frequency, and_____
I’ll mark you as brainlister
Oxygen is a diatomic element.why give reason.
Answer:
Diatomic molecules contain two atoms that are chemically bonded. If the two atoms are identical, as in, for example, the oxygen molecule (O2), they compose a homonuclear diatomic molecule, while if the atoms are different, as in the carbon monoxide molecule (CO), they make up…
Explanation:
yei hoo arko aaxaina ...
