Crystals of sodium chloride were prepared by the following method.
1 25.0 cm3

of dilute hydrochloric acid was accurately measured into a conical flask.
2 Aqueous sodium hydroxide was added until the solution was neutral. The volume of
sodium hydroxide added was measured.
3 The solution was evaporated and the crystals washed with approximately 15 cm3
of water.

Which row shows the pieces of apparatus used to measure the 25.0 cm3

of hydrochloric acid, the

volume of aqueous sodium hydroxide and the 15 cm3
of water?

Answer:

[tex] moles = \frac{ number \: of \: particles}{6.02 \times {10}^{23} } [/tex]

=1.806×10^22/6.02×10^23

=0.03 moles

hope this helps :)

Answer:

The answer is "[tex]26.47\%[/tex]"

Explanation:

Sodium chloride  solute mass[tex]=36 \ g[/tex]

Solvent water mass[tex]=100\ g[/tex]

Calculating the solution mass = Solute mass  + solvent mass

                                                  [tex]= 36\ g +100\ g\\\\ = 136\ g\\\\[/tex]

Calculating the percentage of concentration:

[tex]= \frac{solute\ mass}{solvent\ mass} \times 100\\\\=\frac{36\ grm}{136\ grm} \times 100\\\\=0.2647 \times 100\\\\=26.47 \%[/tex]

Answer:

option B is the correct answer

Answer:

heat energy to keep you warm and light energy to be able to read your book

Explanation:

Answer:

Explanation:

Volume of one mole of a gas = 22.4 litre.

No of molecules in one mole of gas = 6.02 x 10²³ .

Volume of one molecule = 4/3 π R³

= 4/3 x 3.14 x ( 167 x 10⁻¹² m )³

= 19.5 x 10⁶ x 10⁻³⁶ m³

=19.5 x 10⁻³⁰ m³

= 19.5 x 10⁻³⁰ x 10³ litre .

=  19.5 x 10⁻²⁷ litre .

So volume occupied by molecules in one mole of gas

= 19.5 x 10⁻²⁷ x 6.02 x 10²³  litre

117.4 x 10⁻⁴ litre

= .01174 litre.

Excluded volume

= ( 22.4 -  .01174  ) litre .

= 22.388 litre.

Answer:

0.723 moles (5 s.f.)

Explanation:

Whenever there is a chemical equation, ensure that it is balanced. This is because a balanced chemical equation tells us the mole ratio (not the ratio of their masses), which means the relationship of the number of moles of reactants or products with one another.

The chemical equation given has already been balanced. Looking at the coefficients of HBr and Ba(OH)₂, the mole ratio of HBr to Ba(OH)₂ is 2: 1.

• 1 mole of Ba(OH)₂ is needed to react with 2 mole of HBr

Find the number of moles of HBr present:

Number of moles= mass ÷mr

Amount of HBr

= 117 ÷(1 +79.9)

= 1.4462 moles (5 s.f.)

Since the amount of Ba(OH)₂ required is half the amount of HBr present,

amount of Ba(OH)₂ required

= 1.4462 ÷2

= 0.723 moles (3 s.f.)

Notes:

• mr

= relative molecular mass

= sum of relative atomic masses (which can be found in the periodic table) in a molecule

The question is incomplete, the complete question is:

Which statements are consistent with Dalton's atomic theory as it was originally stated? Why?

a. Sulfur and oxygen atoms have the same mass.

b. All cobalt atoms are identical.

c. Potassium and chlorine atoms combine in a 1:1 ratio to form potassium chloride.

d. Lead atoms can be converted into gold.

Answer: The correct options are b) and c).

Explanation:

Some of the postulates of Dalton's atomic theory are:

For the given options:

For a:

The statement is inconsistent with the theory as no two elements can have the same mass. Only atoms of the same element can have the same mass.

This is consistent with the theory as atoms of the same element are identical.

This is consistent with the theory as atoms combine in a simple whole number ratio.

The statement is inconsistent with the theory as atoms of one element cannot be changed to atoms of other element.

Hence, the correct options are b) and c).

Answer:

The answer would be [HCIO][OH-]

_________

[CIO-]

Explanation:

So, the answer would be (b).

Answer:

-Aerospace Industry.

-Transport Industry.

-Computer Industry.

-Telecommunication industry.

-Agriculture industry.

-Construction Industry.

-Education Industry.

-Pharmaceutical Industry.

-Food Industry

-Health Care Industry

-Hospitality Industry

-Entertainment Industry

Answer: The electronic configuration of selenium is [tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^4[/tex]

Explanation:

The atomic number is defined as the number of protons or number of electrons present in a neutral atom.

Number of electrons will be equal to the atomic number of an atom.

Electronic configuration is defined as the representation of electrons in an atom.

Selenium is the 34th element of the periodic table.

The electronic configuration of Selenium is [tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^4[/tex]

It has 6 electrons that are present in the outermost shell.

Answer:

a group of electrochemical cells that can be recharged

Answer:

liter

Explanation:

I think liter because it is not listed as a SI unit

Answer:

[tex]{ \bf{d). \: { \tt{litre}}}}[/tex]

Answer:

39.02 amu

Explanation:

The average atomic mass of an element can be calculated as follows :

[tex]X=\dfrac{9.67\times 38+78.68\times 39+11.34\times 40+0.31\times 41}{100}\\\\X=\dfrac{3902.29}{100}\\\\X=39.02\ amu[/tex]

So, the atomic mass of the element X is 39.02 amu.

Answer:

Cr ^ 3 +

Explanation:

Recordemos que el número atómico es el número de protones en el núcleo del átomo. También corresponde al número de electrones en el átomo neutro.

Dado que el número de protones es 24, entonces el elemento debe ser cromo.

Si hay 21 electrones presentes, entonces se deben haber perdido 3 electrones para dar Cr ^ 3 +.

Answer:

c

Explanation:

Nh4OH + HCL ---> NH4Cl + H3O

so ph decreases as H3O increases

and OH also decreases

When NH4OH is added to a solution with HCI, the pH of the solution B ) increases as the OH- concentration increases.

NH₄OH is a strong base as a result of the presence of the OH compound which is a base as well. Bases have high pH and acids have low pH.

This means that as the OH- concentration increases, the solution is being made to be more basic which would lead to the pH rising.

In conclusion, option B is correct.

Find out more on Bases at https://brainly.com/question/15565260.

Answer:

0.067M H3PO4

Explanation:

H3PO4 reacts with NaOH as follows:

H3PO4 + 3NaOH → 3H2O + Na3PO4

Where 1 mole of H3PO4 reacts with 3 moles of NaOH

To solve trhis question we need to find the moles of NaOH required. With the chemical equation we can find the moles of H3PO4 and its concentration as follows:

Moles NaOH:

50.0mL = 0.0500L * (0.20moles /L) = 0.0100 moles NaOH

Moles H3PO4:

0.0100 moles NaOH * (1mol H3PO4 / 3mol NaOH) = 0.00333 moles H3PO4

Concentration:

0.00333 moles H3PO4 / 0.0500L = 0.067M H3PO4

Answer:

474. 64 mm Hg

Explanation:

using Boyle's Law that is

P1. V1 = P2. V2

655 × 10 = P2 × 13. 8

[tex]P2 = \frac{655 \times 10}{13.8} [/tex]

P2 = 474. 64 mm Hg

Answer:

the reaction is spontaneous

Answer:

ïgGshdhdhdhdhdbdhdhdjddk

Answer:

Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

hope it helps

Sulfur dioxide and nitrogen oxides can contribute to acid precipitation.

A pollutant is a chemical or biological substance which harms water, air, or land quality.

Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

Learn more  about the pollutants here:

https://brainly.com/question/16101020

#SPJ2

Answer:

Nice and you

Explanation:

Please Mark me brainliest

Answer:

sry I don't know the answer

Sodium has a mass number of 23amu. Since sodium has 11 protons, the number of neutrons must be 23 – 11 = 12 neutrons.

Answer:

Ga3+ is a gallium cation

Answer:

A

Explanation:

Coupled reactions are reactions in which endergonic reactions obtain the energy to go forward from exergonic reactions.

When benzene diazonium chloride interacts with phenol, the para position of the phenol molecules is associated with the diazonium salt, resulting in

p-hydroxyazobenzene. The coupling reaction is the name given to this process.

The salt CaCl2 (calcium chloride) and water (H2O) are formed in this reaction. Also formed is the gas carbon dioxide (CO2) which may cause a bloated feeling in the stomach. The acid that is secreted in your stomach is approximately 0.1 M (moles per liter) hydrochloric acid.

I hope it helps ●~●

[tex]\huge\fcolorbox{red}{pink}{Answer ♥}[/tex]

Solutions for Neutralization of Acidic Lakes. ... A common solution to increase water hardness in acid lakes is to add lime, a high-alkalinity calcium compound to the acid lakes. This method is only temporary and very expensive, as it often needs to be applied every year.

Hope it helps uh ✌️✌️