Decrease R450 in the ratio 9:8​

The equation of the circle in standard form is (x-5)² + (y+1)² = 9. The center of the circle is (5,-1) and the radius is 3.

To write the equation of the circle in standard form, we need to complete the square for both x and y terms:

x² - 10x + y² + 8y + 37 = 0

(x² - 10x + 25) + (y² + 8y + 16) + 37 = 25 + 16

(x - 5)² + (y + 4)² = 6²

So the equation of the circle in standard form is (x - 5)² + (y + 4)² = 36.

The center of the circle is (5, -4), and the radius is 6.

Learn more about standard form equation here: brainly.com/question/12452575

#SPJ4

Answer:

center is 5,-4 radius is 2

Step-by-step explanation:

Answer: Yes Sofia will have enough money

=======================================================

Explanation:

Refer to the drawing below. I've split the hexagon into two pieces. The bottom is a rectangle and the top is a trapezoid.

The area of the rectangle is 16*7 = 112 square meters.

The trapezoid has 16 as one of the parallel sides. The other side is x meters. We'll use the perimeter 54 to determine what x must be

sum of the exterior sides = perimeter

6+7+16+7+6+x = 54

42+x = 54

x = 54-42

x = 12

The top most side is 12 meters. This is the missing side of the trapezoid. The hexagon has a height of 12.66 meters, so the trapezoid's height must be 12.66-7 = 5.66 meters. Refer to the blue segment I marked in the drawing below.

area of the trapezoid = 0.5*height*(base1+base2)

area = 0.5*5.66*(16+12)

area = 79.24 square meters

----------------

Recap so far

The total area of the entire hexagon is therefore 112+79.24 = 191.24 square meters.

Let's convert that to square decimeters.

Recall that 1 decimeter = 10 centimeters

Multiply both sides by 10

1 decimeter = 10 centimeters

10*(1 decimeter) = 10*(10 centimeters)

10 decimeters = 100 centimeters

10 decimeters = 1 meter

Then,

[tex]191.24 \text{ sq m}= 191.24 \text{ sq m} * \frac{10 \text{ dm}}{1 \text{ m}} * \frac{10 \text{ dm}}{1 \text{ m}}\\\\= \frac{191.24*10*10}{1*1} \text{ sq dm}\\\\= 19124 \text{ sq dm}\\\\[/tex]

The entire lawn is 19124 square decimeters.

----------------

We have one final block of calculations to determine the total price.

x = number of rolls

1 roll covers 90 square decimeters

x rolls cover 90x square decimeters

90x = 19124

x = 19124/90

x = 212.489 approximately

Round up to the nearest integer to get x = 213. It doesn't matter that 212.489 is closer to 212. We round up to clear the hurdle. It means we'll have leftover grass that isn't used (perhaps it could be handy to have some back up grass just in case mistakes are made, and some patches need to be redone).

In short, Sofia needs 213 rolls.

1 roll costs $4.50

213 rolls will cost 213*4.50 = 958.50 dollars.

This is under the $1000 threshold (with 1000-958.50 = 41.50 dollars to spare).

Sofia will have enough money to pay for all of the grass.

A skater has a mean score of 7. 25 points. An equation to determine the skaters total scores received from eight judges is equals to the x₁ + x₂ + x₃ + x₄ + x₅ + x₆ + x₇ + x₈ = 58.

Mean is called the average of the values and is calculated by dividing the addition of values by the total number of values. It is denoted by [tex]\bar X[/tex]. That is bar above X represents mean of x number of values. Mathematically, Mean = (Sum of all the values/Total number of values).We have in a skating compotion where each skater receives score from eight judges. Now, Mean or average of score points obtained by a skater = 7.25 points. Let the skater's received score from eight judges be equals to x₁,x₂,x₃,x₄,x₅,x₆,x₇, x₈. Total score received by skater = x₁ + x₂ + x₃ + x₄ + x₅ + x₆ + x₇ + x₈ and we have to write the equation to determine the skaters total scores. Now, in this case mean of scores means the sum of scores received by skaters from eight judges divided by eight (judges).

=> 7.25 = (x₁ + x₂ + x₃ + x₄ + x₅ + x₆ + x₇ + x₈)/8

=> x₁ + x₂ + x₃ + x₄ + x₅ + x₆ + x₇ + x₈

= 8× 7.25

=> x₁ + x₂ + x₃ + x₄ + x₅ + x₆ + x₇ + x₈

= 58

which is equation of 8 variables for total score. Therefore, the required equation is x₁ + x₂ + x₃ + x₄ + x₅ + x₆ + x₇ + x₈ = 58.

For more information about mean, visit :

https://brainly.com/question/20118982

#SPJ4

Answer:

If the store marks up the price of the diving board by 45%, the selling price will be 100% + 45% = 145% of the cost price.

Let's calculate the selling price:

Selling price = Cost price + Mark-up

Mark-up = Selling price - Cost price

Mark-up = (145% of cost price) - cost price

Mark-up = 0.45 * cost price

We know that the store paid $261 for the diving board, so:

Mark-up = 0.45 * $261 = $117.45

Therefore, the amount of the mark-up is $117.45.

well, what's 45% of 261?

[tex]\begin{array}{|c|ll} \cline{1-1} \textit{\textit{\LARGE a}\% of \textit{\LARGE b}}\\ \cline{1-1} \\ \left( \cfrac{\textit{\LARGE a}}{100} \right)\cdot \textit{\LARGE b} \\\\ \cline{1-1} \end{array}~\hspace{5em}\stackrel{\textit{45\% of 261}}{\left( \cfrac{45}{100} \right)261}\implies \text{\LARGE 117.45}[/tex]

The probability that a person chosen at random at age 40 or older has only completed high school is 0.2912.

Probability is the chance or likelihood that something will occur. It is quantified using numbers, ranging from 0 (no chance) to 1 (certainty). It also helps us to draw conclusions about the chances of something happening based on the available data.

The total number of people who have only completed high school

=(5394)

the total number of people in the age group 40 and over =(18521)

By dividing both the data, we get

5394/18521= 0.2912

From the given data in the table, we can calculate the probability that a person chosen at random at age 40 or older has only completed high school.

For more questions related to data

https://brainly.com/question/19243813

#SPJ1

The dimensions of the triangle with maximum area are a base of 11 cm and a height of 11 cm.

We are given that the sum of the base and height of a triangle is 22 cm. Let's call the base of the triangle "b" and the height "h". Then we have the equation:

b + h = 22

We want to find the dimensions of the triangle that will give us the maximum area.

The formula for the area of a triangle is A = (1/2)bh.

We can use the equation b + h = 22 to solve for one of the variables in terms of the other.

we can solve for h:

h = 22 - b

Substituting this into the formula for the area, we get:

A = (1/2)b(22 - b)

The equation 0 = 11b - (1/2)b² can be rearranged to:

(1/2)b² - 11b = 0

We can then use the quadratic formula to solve for "b"

b = 11 ± 11

So the value of b that gives us the maximum area is b = 11 cm. Substituting this back into the equation h = 22 - b, we get:

h = 22 - 11 = 11 cm

Triangle has a base of 11 cm and a height of 11 cm.

To practice more questions about area of triangle:

https://brainly.com/question/21735282

#SPJ11

P(0 received correctly) = P(0 sent) × P(0 received correctly | 0 sent)= [tex](2/3) × 0.8= 0.5333[/tex] (rounded to 1 decimal place)Thus, the probability that a 0 is received is 0.5333 (rounded to 1 decimal place).

0.5333

A space probe near Neptune communicates with Earth using bit strings. Suppose that in its transmissions it sends a 1 one-third of the time and a 0 two-thirds of the time. When a 0 is sent, the probability that it is received correctly is 0.8 and the probability that it is received incorrectly (as a 1) is 0.2. When a 1 is sent the probability that it is received correctly is 0.8 and the probability that it is received incorrectly (as a 0) is 0.2.The probability that a 0 is received correctly is given in the problem as 0.8, and the probability that a 0 is sent is 2/3. Therefore, the probability that a 0 is received correctly

for such more questions on probability

https://brainly.com/question/13604758

#SPJ11

The coordinates of the point P is (-1,2) .

What is translation?

In mathematics, a translation is a geometric transformation that moves every point of a figure or a space by the same amount in a given direction. The amount and direction of the movement can be described using a vector, which is a mathematical object that has both magnitude and direction.

Finding the coordinates of the point P :

The coordinates of point P can be found by subtracting the vector from point Q.

To find the coordinates of point P, we need to subtract the vector [tex]\begin{pmatrix}4\\-3\end{pmatrix}[/tex] from the coordinates of point Q, which are (3, -1).

Subtracting the x-coordinate of the vector from the x-coordinate of point Q gives us:

3 - 4 = -1

Similarly, subtracting the y-coordinate of the vector from the y-coordinate of point Q gives us:

-1 - (-3) = 2

Therefore, the coordinates of point P are (-1, 2).

So, the correct answer is (C) (-1, 2).

To know more about coordinates visit :

brainly.com/question/16634867

#SPJ1

the statement "A Triangle with side lengths 20,21, and 28 is a right triangle" is invalidated.

As, You may simply rule out the first three options if you are familiar with specific Pythagorean triples and other triangle relationships.

Pythagorean triples consist of the three positive numbers a, b, and c, where a2+b2 = c2. The symbols for these triples are (a,b,c). Here, a represents the right-angled triangle's hypotenuse, b its base, and c its perpendicular. The smallest and most important triplets are (3,4,5).

So,

20² +21² = 400 +441 = 841 = 29²

The appropriate choice is  20, 21, and 29

To know more about Pythagorean triples, click the below link

https://brainly.com/question/15190643

#SPJ4

Answer:

15/x * 100 %

Step-by-step explanation:

Since we don't know the total, we have 15/x * 100 % as the percent of how many people passed the test. (x is amount of people, 15 or greater.)

Answer:

Step-by-step explanation:

which band?

The relationship between distance and travel time. It is not excessively strong or weak. In other words, the rate of change in journey time is moderate and constant with respect to distance.

positive negative moderate weak linear nonlinear relationship between distance and travel time can be described as follows:•

           Positive• Linear• Moderate

   Explain as we move from point A to point B, the distance covered and the travel time it takes to get there are positively correlated. As the distance increases, the travel time required to reach the destination also increases, resulting in a positive correlation.

          The relationship between distance and travel time is linear because the rate at which distance is covered remains constant, resulting in a straight-line relationship on a graph. It means that if distance doubles, the travel time will also double, indicating a linear relationship.

Hence, the linear relationship is also referred to as a direct relationship. On a graph, the line that represents the relationship between distance and travel time is moderate. This implies that the slope of the line is neither too steep nor too gentle.

               Thus, it is neither too strong nor too weak. In other words, the rate of change in travel time is consistent as distance changes, making it moderate.

To learn more about the relationship between distance and travel time: https://brainly.com/question/17146782

#SPJ11

(a) The present value of an annuity formula can be used to calculate the monthly payment: Payment is equal to (PV x I / (1 - (1 + i)(-n)).

Where PV is the loan's present value, I is its monthly interest rate (0.035 / 12), and n is the number of payments (15 years multiplied by 12 months every year = 180 months).

Applying the values provided, we obtain:

(136,000 x 0.002917) / (1 - (1 + 0.002917)(-180)) is the amount to be paid.

Amount paid: $1,054.63

Hence, the installment will be $1,054.63 per month.

(b) By deducting the loan amount (PV) from the total amount paid over the loan's lifetime, it is possible to get the total interest payment:

Total interest equals PV minus (Payment x n)

Applying the values provided, we obtain:

$1,054.63 multiplied by 180 equals $136,000 in interest.

Interest totaled $88,833.40.

The total interest payment will therefore be $88,833.40.

(c) The Turners will have paid 120 times over the course of 10 years (10 years x 12 months/year). To determine their equity, we can apply the formula for calculating a loan's remaining balance:

The remaining balance is calculated as follows: PV x (1 + i)n - Payment x (1 + i)n - 1)/i

Where n denotes how many payments are still due (180 - 120 = 60).

Applying the values provided, we obtain:

The remaining balance is calculated as follows: $136,000 x (1 + 0.002917)60 - $1,054.63 x (1 + 0.002917)60 - 0.002917

Balance remaining: $71,587.90

As a result, their equity will be $170,000 (the original purchase price) less $71,587.90 (the outstanding balance) = $98,412.10 after ten years.

Learn more about Simple interest here:

brainly.com/question/25845758

#SPJ1

Answer:

the value of x is approximately 0.382 cm.

Step-by-step explanation:

To solve the question asked, you can say:  So the other side of the triangle will be as [tex]A = \sqrt73[/tex].

A triangle is a closed two-dimensional geometric object consisting of three line segments, called edges, that intersect at three places called vertices. Triangles are distinguished by their sides and angles. A triangle can be equilateral (all sides equal), isosceles, or odd, depending on the sides. Triangles are classified as acute (any angle less than 90 degrees), right (angles equal to 90 degrees), or obtuse (any angle greater than 90 degrees). The area of ​​a triangle can be calculated using the formula A =​​ (1/2)bh. where A is the area, b is the base of the triangle, and h is the height of the triangle.  

here in the triangle we have sides that are 3 and 8

we can use

[tex]A^2 = B^2 + C^2\\A^2 = 3^2 + 8^2\\A^2 = 9+64\\A^2 = 73\\A = \sqrt73[/tex]

So the other side of the triangle will be as [tex]A = \sqrt73[/tex].

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

The sugar concentration would be approximately 62.5%.

To find the concentration of sugar in the solution, we need to use the formula:

In this case, the solute is sugar and the solvent is water. We are given that the mass of sugar is 50 grams and the mass of water is 30 grams. However, we need to convert the mass of water to volume since we need the volume of the entire solution to calculate the concentration.

We can assume that the density of water is 1 g/mL, so the volume of water is 30 mL. The total volume of the solution is therefore 50 mL + 30 mL = 80 mL.

Now we can use the formula to find the concentration of sugar:

So the concentration of sugar in the solution is approximately 0.625 grams per milliliter.

learn more about Sugar:

https://brainly.com/question/501165
#SPJ4

The radius of the given circle is x = 3 and x = 3/11.

A polynomial equation of degree two is a quadratic equation, indicating that the variable's maximum exponent is 2. There are various ways to solve a quadratic equation, including factoring, completing the square, and applying the quadratic formula. Finding two quadratic expression factors that multiply to produce the constant term c and add to produce the linear term b's coefficient is known as factoring. The quadratic expression is completed by adding and removing a constant component to create a perfect square trinomial that can be factored or solved by calculating the square root.

In the given figure connect the points QF and QG using a line segment, thus forming two right angled triangle.

The perpendicular segment QA divides the base into two equal parts. Thus, the base of the triangle is 8.

Using the Pythagorean theorem we have:

(QF)² = (8)² + (4x + 3)²

QG² = 8² + (7x - 6)²

In the figure QF = QG = r thus:

(8)² + (4x + 3)² = 8² + (7x - 6)²

Expanding using the algebraic identity:

16x² + 24x + 9 = 49x² - 84x + 36

33x² - 108x + 27 = 0

3(11x² - 36x + 9) = 0

Using the quadratic formula:

x = (-b ± √(b² - 4ac)) / 2a

Substitute the values a = 11, b = -36, and c = 9:

x = (-(-36) ± √((-36)² - 4(11)(9))) / 2(11)

x = (36 ± √(1296 - 396)) / 22

x = (36 ± √900) / 22

x = (36 ± 30) / 22

x = (36 + 30) / 22 = 3

x = (36 - 30) / 22 = 3/11

x = 3 and x = 3/11.

Thus, the radius of the given circle is x = 3 and x = 3/11.

Learn more about radius here:

https://brainly.com/question/13449316

#SPJ1

Answer:

<b> <i>

Step-by-step explanation:

The figures created are a square and a right triangle, and the perimeter of the entire figure is (13x/3) + x × sqrt(10).

When Namandu divides the top side of the square into three equal parts, he creates two segments of length x/3 each. By connecting the first point of division with the vertex of the parallel side, he creates a right triangle with legs of length x/3 and x, and hypotenuse of length y.

Using the Pythagorean theorem, we can solve for y:

y^2 = (x/3)^2 + x^2

y^2 = x^2/9 + x^2

y^2 = (10x^2)/9

y = x×sqrt(10)/3

Now we can find the perimeter of each figure that is created

Perimeter of the original square = 4x

Perimeter of the right triangle = x + x/3 + y = x + x/3 + xsqrt(10)/3

Perimeter of the entire figure = 4x + x + x/3 + xsqrt(10)/3 = (13x/3) + x×sqrt(10)

Learn more about Pythagorean theorem here

brainly.com/question/14930619

#SPJ4

Answer:

Elise's average pay per hour for the year 2017 was £11.88.

Step-by-step explanation:

First, we need to calculate Elise's monthly salary in 2017 after the 3% increase:

3% of £2100 = 0.03 x £2100 = £63

Elise's new monthly salary in 2017 = £2100 + £63 = £2163

Next, we need to calculate her total earnings in 2017:

Total earnings = monthly salary x number of months worked

Elise worked for 45 weeks in 2017, which is approximately 10.4 months:

Total earnings = £2163 x 10.4 = £22,477.20

Finally, we can calculate her average pay per hour for the year:

Total number of hours worked = 42 hours/week x 45 weeks = 1890 hours

Average pay per hour = total earnings / total number of hours worked

Average pay per hour = £22,477.20 / 1890 hours = £11.88 per hour

Answer:

I got $13.73 per hour

Step-by-step explanation:

If you multiply 2100 by 12 months you get $25200 for an annual salary before percent increase.

Then you include the 3% salary increase each month 25200 x .03 = 756 then add the two 25200 + 756 = 25956 OR you can calculate the longer way by doing each individual month, either way it will be the same answer. 2100 x .03 = 63 then 2100 + 63 = 2163 then 2163 x 12 = 25956

Then you divide 25956 by the number of weeks worked in the year. 25956/45 = 576.8

So, each week $576.8 was earned.

Then to get an hourly rate, you divide this by the number of hours worked in each week. 576.8/42 = 13.73

So, the hourly rate is $13.73.

I hope this helped :)

The significance of a pedigree symbol consisting of a square with a diagonal slash mark through it is that it represents the male members of the family

It is a standard symbol in a pedigree chart. This symbol represents the sex of a person, in this case, it represents the male sex. In other words, a square with a diagonal slash mark through it is used to represent the male gender in pedigree charts.

A pedigree chart is a diagram that shows the genetic relationships between individuals in a family. It is used to track genetic diseases or traits through generations. A pedigree chart can provide information about a family's medical history and can help doctors to understand how genetic disorders are inherited from one generation to the next. Each symbol used in the pedigree chart has a specific meaning.

The squares represent males while the circles represent females. The horizontal line between two symbols represents marriage, and the vertical line from a symbol represents a child of that union.

See more about symbol at: https://brainly.com/question/1389310

#SPJ11

By using the formula of a geometric sequence, the 14th term will be 125/1024

We have, the Fourth term of geometric sequence T_4= 125 and T_10 = 125/64

Let's find the first term and common ratio of the geometric sequence.

Using the formula of the nth term of a geometric sequence, we get,

T_4 = a * r^3 = 125 ....(1)

and,

T_10 = a * r^9 = 125/64 ...(2)

On dividing eq. (2) by eq. (1), we get,

(r^6) = (125/64) / 125 ⇒ 1/64

Taking the sixth root of both sides, we get:

r = (1/64)^(1/6)

r = 1/2

Now that we know the common ratio, we can use the equation for the nth term of a geometric sequence:

T_n = a * r^(n-1)

To find the 14th term, we substitute n=14 and solve:

T_14 = a * (1/2)^(14-1) ⇒ a * (1/2)^13

We don't know the value of a yet, but we can use the fact that the 4th term is 125 to solve for it:

a * r^3 = 125

a * (1/2)^3 = 125

a = 125 * 2^3

a = 1000

Substituting this value for a, we get:

T_14 = 1000 * (1/2)^13

T_14 = 1000 * 1/8192

T_14= 125/1024

Therefore, the 14th term of the geometric sequence is 125/1024.

To know more about the "geometric sequence": https://brainly.com/question/24643676

#SPJ11

The last two rows of the table should be completed as follows:

Input   Output

8       22.80

10      28.50

An algebraic expression is a mathematical phrase that contains numbers, variables, and operations. It is used to represent a single quantity or value, and can be written in terms of one or more variables.

The rule given is an algebraic expression, x, which is the input, multiplied by 2.85, which is the output. Using this information, we can determine the cost of 10 muffins.

To find the cost of 10 muffins, we can use the algebraic expression given. First, we will multiply 10, the number of muffins, by 2.85, the cost of one muffin. This gives us a total of 28.50. Therefore, the cost of 10 muffins is 28.50.

Using this same rule and process, we can also determine the cost of any number of muffins. For example, if we want to know the cost of 15 muffins, we can simply multiply 15 by 2.85, giving us a total of 42.75.

For more questions related to numbers

https://brainly.com/question/24644930

#SPJ1

The true statement is, Parameter values can be used within the method code block. (option e).

In computer programming, methods are used to group a set of instructions together that can be executed repeatedly. Parameters are used to pass values to a method so that the method can perform specific actions based on the values passed. Let's discuss the given statements one by one to determine which ones are true.

Parameter values can be used within the method code block.

This statement is true. Parameter values can be used within the method code block to perform specific actions. The parameter values can be manipulated or combined with other values to produce the desired result.

In summary, methods can be written with any number of parameters, and parameter values can be used within the method code block to perform specific actions. The number of parameters needed will depend on the specific task the method is designed to perform.

Hence the option (e) is correct.

To know more about parameter here

https://brainly.com/question/30757464

#SPJ4

Answer:

Step-by-step explanation:

100 students all together.

50+70=120....so 20 must like both.

When the function d(x) = -x +(-3), then the value of d(0) is -3

In mathematics, a function is a relationship between two sets of numbers, called the domain and range. A function assigns each element of the domain to exactly one element of the range.

In the given problem, we are given a function d(x)=-x-3. The notation d(0) represents the value of the function d(x) when x = 0.

To find d(0), we need to substitute x = 0 in the function d(x)=-x-3, which gives:

d(0) = -(0) - 3

The first term -(0) is equal to zero, and the second term -3 is a constant value that remains the same regardless of the value of x. Therefore, we can simplify the expression as

d(0) = -3

Learn more about function here

brainly.com/question/12431044

#SPJ4

The measurement of  of angle c is (4x-24. 6) and measure of angle d is (x+11. 3). If the angles are supplementary, the value of x is 38.66.

The measure of angle c is (4x-24. 6)

The measure of angle d is (x+11. 3)

If both angles are supplementary angles then,

angle c + angle d = 180

(4x-24. 6) + (x+11. 3) = 180

5x - 13.3 = 180

5x = 180 + 13.3

5x = 193.3

x = 193.3/5

x = 38.66

So, the value of x is 38.66

What distinguishes complimentary from supplementary angles?

Two angles are said to be supplementary angles because they combine to generate a linear angle when their sum is 180 degrees. When two angles add up to 90 degrees, however, they are said to be complimentary angles and together they make a right angle.

To know more about supplementary angles, click the below link

https://brainly.com/question/13045673

#SPJ4

The principal sum is Rs. 1640 if the difference in simple interest between 3 years and 4 years is Rs. 82 at a rate of 5% per annum.

Let x be the principal sum. According to the problem, the difference in simple interest between 3 years and 4 years is Rs. 82. This means that the interest earned in the fourth year is Rs. 82 more than the interest earned in the third year.

Using the formula for simple interest, we can calculate the interest earned in each year:

Simple interest for 3 years = (x * 5% * 3) = 0.15x

Simple interest for 4 years = (x * 5% * 4) = 0.2x

The difference between the two is:

0.2x - 0.15x = 0.05x

We are given that this difference is equal to Rs. 82, so:

0.05x = 82

Solving for x, we get:

x = 82 / 0.05 = 1640

Therefore, the principal sum is Rs. 1640.

Learn more about the simple interest here: brainly.com/question/25845758

#SPJ4

The cost of one small crate of apples is $12 and the cost of one large crate of peaches is $8. The cost of 7 small cates of apples and 5 large containers of peach is $126.

The system of equations that describe the question is:

3s + 10l = 116 equation 1

11s + 20l = 292 equation 2

Where:

s = cost of one small crate of apples

l = cost of one large crate of peaches

The elimination method would be used to determine the values of s and l.

Multiply equation 1 by 2

6s + 20l = 232 equation 3

Subtract equation 3 from equation 2:

5s = 60

Divide both sides of the equation by 5

s = 60 / 5

s = $12

Substitute for s in equation 1:

3(12) + 10l = 116

36 + 10l = 116

10l = 116 - 36

10l = 80

l = 80 / 10

l = 8

Cost of 7 small crates of apples and 5 large containers of peaches = (7 x 12) + (8 x 5) = $124

To learn more about simultaneous equations, please check: https://brainly.com/question/25875552

#SPJ1

Answer:

42x-27

Step-by-step explanation: