[tex]\:[/tex]
Hydroelectric power, also called hydropower is the electricity produced from generators driven by turbines that convert the potential energy of falling or fast-flowing water into mechanical energy.
Answer:
Hydroelectric power/hydropower - electricity produced by a hydraulic source, specifically energy generated falling or flowing water
In a similar rolling race (no slipping), the two objects are a solid cylinder and hollow cylinder of the same radius and mass. Which reaches the bottom first
Answer:
solid cylinder
Explanation:
the object that arrives first is the object that has more speed, let's use the concepts of energy
starting point. Highest point
Em₀ = U = m g h
final point. Lowest point
Em_f = K = ½ mv² + ½ I w²
since the body has rotational and translational movement
how energy is conserved
m g h = ½ mv² + ½ I w²
linear and angular velocity are related
v = w r
w = v / r
we substitute
m g h = ½ mv² + ½ I (v/r) ²
mg h = ½ v² (m + I /r²)
v = [tex]\sqrt{2gh \ \frac{m}{m + \frac{I}{r^2} } }[/tex]
the tabulated moments of inertia for the bodies are
solid cylinder I = ½ m r²
hollow cylinder I = m r²
we look for the speed for each body
solid cylinder
v₁ = [tex]\sqrt {2gh} \ \sqrt{\frac{m}{m + m/2} }[/tex]
v₁ = [tex]\sqrt{2gh} \ \sqrt{2/3}[/tex]
let's call v₀ = [tex]\sqrt{2gh}[/tex]
v₁ = 0.816 v₀
hollow cylinder
v₂ = [tex]\sqrt{2gh } \ \sqrt{\frac{m}{m+ m} }[/tex]
v₂ = v₀ √½
v₂ = 0.707 v₀
Therefore, the body that has the highest speed is the solid cylinder and since time is the inverse of speed, this is the body that spends less time to reach the bottom, that is, it is the first to arrive
Calculate the minimum area moment of inertia for a rectangular cross-section with side lengths 6 cm and 4 cm.
52 cm4
72 cm4
32 cm4
24 cm4
2 cm4
Answer:
Minimum Area of rectangle = 24 centimeter²
Explanation:
Given:
Length of rectangle = 6 centimeter
Width of rectangle = 4 centimeter
Find:
Minimum Area of rectangle
Computation:
Minimum Area of rectangle = Length of rectangle x Width of rectangle
Minimum Area of rectangle = 6 x 4
Minimum Area of rectangle = 24 centimeter²
The paper dielectric in a paper-and-foil capacitor is 0.0785 mm thick. Its dielectric constant is 2.35, and its dielectric strength is 49.5 MV/m. Assume that the geometry is that of a parallel-plate capacitor, with the metal foil serving as the plates.
Required:
a. What area of each plate is required for for a 0.300 uF capacitor?
b. If the electric field in the paper is not to exceed one-half the dielectric strength, what is the maximum potential difference that can be applied across the compactor?
Answer:
a) required area is 1.1318 m²
b) the maximum potential difference that can be applied across the compactor is 1931.1 V
Explanation:
Given the data in the question;
dielectric constant εr = 2.35
distance between plates ( thickness ) d = 0.0785 mm = 7.85 × 10⁻⁵ m
dielectric strength = 49.5 MV/m
a)
given that capacity capacitor C = 0.3 uF = 0.3 × 10⁻⁶ F
To find the Area, we use the following the expression.
C = ε₀εrA / d
we know that The permittivity of free space, ε₀ = 8.854 x 10⁻¹² (F/m)
we substitute
0.3 × 10⁻⁶ = [ (8.854 x 10⁻¹²) × 2.35 × A ] / 7.85 × 10⁻⁵
A = [ (0.3 × 10⁻⁶) × (7.85 × 10⁻⁵) ] / [ 2.35 × (8.854 x 10⁻¹²) ]
A = 2.355 × 10⁻¹¹ / 2.08069 × 10⁻¹¹
A = 1.1318 m²
Therefore, required area is 1.1318 m²
b)
the maximum potential difference that can be applied across the compactor.
We use the following expression;
⇒ 1/2 × dielectric strength × thickness d
we substitute
⇒ 1/2 × ( 49.5 × 10⁶ V/m ) × ( 7.85 × 10⁻⁵ m )
⇒ 1931.1 V
Therefore, the maximum potential difference that can be applied across the compactor is 1931.1 V
What is the meant of by renewable energy and non-renewrable with example of each.
Answer:
Renewable energy is a type of energy that can be renewed easily, such as sunlight. By using Solar panels to collect the suns energy, we are not depleting it, so this source is renewable.
Non-renewable energy is something that cannot easily be replenished. An example would be oil because oil takes millions of years to form and cannot be renewed easily.
Calculate the buoyant force due to the surrounding air on a man weighing 600 N . Assume his average density is the same as that of water. Suppose that the density of air is 1.20 kg/m3.
Answer:
[tex]F_b= 0.720 N[/tex]
Explanation:
From the question we are told that:
Weight [tex]W=600N[/tex]
Average density [tex]\rho=1.20kg/m^3[/tex]
Mass
[tex]m=\frac{W}{g}[/tex]
[tex]m=\frac{600}{9.81}[/tex]
[tex]m=61.22kg[/tex]
Generally the equation for Volume is mathematically given by
[tex]V =\frac{ mass}{density}[/tex]
[tex]V= \frac{61.22}{1000}[/tex]
[tex]V=0.06122 m^3[/tex]
Therefore
Buoyant force [tex]F_b[/tex]
[tex]F_b=\rho*V*g[/tex]
[tex]F_b= rho_air*V*g[/tex]
[tex]F_b= 0.720 N[/tex]
Write a short note of the following
a) Reflection
b) Refraction
c) Diffraction
Answer:
a) Light that passes through the floor to reveal yourself (not shadow).
b) 2 rays of light that bounce between 2 transparent media.
c) I don't know what is Diffraction?
A 1030 kg car has four 12.0 kg wheels. When the car is moving, what fraction of the total kinetic energy of the car is due to rotation of the wheels about their axles
Answer:
The required fraction is 0.023.
Explanation:
Given that
Mass of a car, m = 1030 kg
Mass of 4 wheels = 12 kg
We need to find the fraction of the total kinetic energy of the car is due to rotation of the wheels about their axles.
The rotational kinetic energy due to four wheel is
[tex]=4\times \dfrac{1}{2}I\omega^2\\\\=4\times \dfrac{1}{2}\times \dfrac{1}{2}mR^2(\dfrac{v}{R})^2\\\\=mv^2[/tex]
Linear kinetic Energy of the car is:
[tex]=\dfrac{1}{2}mv^2\\\\=\dfrac{1}{2}\times Mv^2[/tex]
Fraction,
[tex]f=\dfrac{mv^2}{\dfrac{1}{2}Mv^2}\\\\f=\dfrac{m}{\dfrac{1}{2}M}\\\\f=\dfrac{12}{\dfrac{1}{2}\times 1030}\\\\=0.023[/tex]
So, the required fraction is 0.023.
1) Consider an electric power transmission line that carries a constant electric current of i = 500 A. The cylindrical copper cable used to transmit this current has a diameter o = 2.00 cm and a length L = 150 km. If there are 8.43x10^28 free electrons per cubic meter (m^3 ) in the cable, calculate how long it would take for an electron to cross the entire length of the transmitter line.
Answer:
t = 1.27 x 10⁹ s
Explanation:
First, we will find the volume of the wire:
Volume = V = AL
where,
A = Cross-sectional area of wire = πr² = π(1 cm)² = π(0.01 m)² = 3.14 x 10⁻⁴ m²
L = Length of wire = 150 km = 150000 m
Therefore,
V = 47.12 m³
Now, we will find the number of electrons in the wire:
No. of electrons = n = (Electrons per unit Volume)(V)
n = (8.43 x 10²⁸ electrons/m³)(47.12 m³)
n = 3.97 x 10³⁰ electrons
Now, we will use the formula of current to find out the time taken by each electron to cross the wire:
[tex]I =\frac{q}{t}[/tex]
where,
t = time = ?
I = current = 500 A
q = total charge = (n)(chareg on one electron)
q = (3.97 x 10³⁰ electrons)(1.6 x 10⁻¹⁹ C/electron)
q = 6.36 x 10¹¹ C
[tex]500\ A = \frac{6.36\ x\ 10^{11}\ C}{t}\\\\t = \frac{6.36\ x\ 10^{11}\ C}{500\ A}[/tex]
Therefore,
t = 1.27 x 10⁹ s
Two identical cars, each traveling at 16 m>s, slam into a concrete wall and come to rest. In car A the air bag does not deploy and the driver hits the steering wheel; in car B the driver contacts the deployed air bag. (a) Is the impulse delivered by the steering wheel to driver A greater than, less than, or equal to the impulse delivered by the air bag to driver B
Answer:
I = - m 16 the two impulses are the same,
Explanation:
The impulse is given by the relationship
I = Δp
I = p_f - p₀
in this case the final velocity is zero therefore p_f = 0
I = -p₀
For driver A the steering wheel impulse is
I = - m v₀
I = - m 16
For driver B, the airbag gives an impulse
I = - m 16
We can see that the two impulses are the same, the difference is that in the air bag more time is used to give this impulse therefore the force on the driver is less
Wind instruments like trumpets and saxophones work on the same principle as the "tube closed on one end" that we examined in our last experiment. What effect would it have on the pitch of a saxophone if you take it from inside your house (at 76 degrees F) to the outside on a cold day when the outside temperature is 45 degrees F ?
Answer:
The correct answer would be - Low pitch.
Explanation:
As it is known that if frequency increases then pitch will be increase as well as pitch depends on frequency, Now for the question it is mentioned that the tube closed on one end frequency is:
f = v/2l
Where,
l = length of the tube
v = velocity of longitudinal wave of gas filled in the tube
Now increase with the temperature the density of the gas decreases and velocity v is inversely proportional to density of gas so velocity increases. So if there is an increase in frequency so pitch also increases. As the temperature inside the house is at 750 F more than outsideat 450 Fso pitch is more inside and the pitch is low outside.
A car travelling at 14.0 m/s approaches a traffic light. The driver applies the brakes and is able to come to halt in 5.6 s. Determine the average acceleration of the car during this time interval.
Answer:
[tex]a=2.5\ m/s^2[/tex]
Explanation:
Given that,
Initial speed of the car, u = 14 m/s
Finally, it comes to rest, v = 0
Time, t = 5.6 s
We need to find the average acceleration of the car during this time interval. We know that,
[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{0-14}{5.6}\\\\a=-2.5\ m/s^2[/tex]
So, the acceleration of the car is [tex]2.5\ m/s^2[/tex] in the opposite direction of motion.
Army is standing still on the ground; Bill is riding his bicycle at 5 m/s eastward: and Carlos is driving his car at 15 m/s westward. How fast does Bill see Carlos moving and in what direction?
a. 10 mis eastward
b. 5 m/s eastward
c. 15 m/s westward
d. 20 m/s westward
e. 10 m/s westward
Explanation:
Given that,
Bill is riding his bicycle at 5 m/s eastward: and Carlos is driving his car at 15 m/s westward.
Taking eastward as positive direction, we have:
[tex]v_B=+5\ m/s[/tex]is the velocity of Bill with respect to Amy (which is stationary)
[tex]v_c=15\ m/s[/tex] is the velocity of Carlos with respect to Amy.
Bill is moving 5 m/s eastward compared to Amy at rest, so the velocity of Bill's reference frame is
[tex]v_B=+5\ m/s[/tex]
Therefore, Carlos velocity in Bill's reference frame will be
[tex]v_c'=-15\ m/s-(+5\ m/s)\\\\=-20\ m/s[/tex]
So, the magnitude is 20 m/s and the direction is westward (negative sign).
A mass of 240 grams oscillates on a horizontal frictionless surface at a frequency of 2.5 Hz and with amplitude of 4.5 cm.
a. What is the effective spring constant for this motion?
b. How much energy is involved in this motion?
Answer:
(a) The spring constant is 59.23 N/m
(b) The total energy involved in the motion is 0.06 J
Explanation:
Given;
mass, m = 240 g = 0.24 kg
frequency, f = 2.5 Hz
amplitude of the oscillation, A = 4.5 cm = 0.045 m
The angular speed is calculated as;
ω = 2πf
ω = 2 x π x 2.5
ω = 15.71 rad/s
(a) The spring constant is calculated as;
[tex]\omega = \sqrt{\frac{k}{m} } \\\\\omega ^2 = \frac{k}{m} \\\\k = m\omega ^2\\\\where;\\\\k \ is \ the \ spring \ constant\\\\k = (0.24) \times (15.71)^2\\\\k = 59.23 \ N/m[/tex]
(b) The total energy involved in the motion;
E = ¹/₂kA²
E = (0.5) x (59.23) x (0.045)²
E = 0.06 J
derive expression for pressure exerted by gas
If a full wave rectifier circuit is operating from 50 Hz mains, the fundamental frequency in the ripple will be
Hz 50
Hz 70.7
Hz 100
Hz 25
Answer:
100Hz
Explanation:
In a full wave rectifier, the fundamental frequency of the ripple is twice that of input frequency. Given the input frequency of 50 Hz, the fundamental frequency will be 2 × 50 = 100Hz
Answer:
HZ 100 is the right answer hope you like it
A 34-m length of wire is stretched horizontally between two vertical posts. The wire carries a current of 68 A and experiences a magnetic force of 0.16 N. Find the magnitude of the earth's magnetic field at the location of the wire, assuming the field makes an angle of 72.0° with respect to the wire.
Answer:
7.28×10⁻⁵ T
Explanation:
Applying,
F = BILsin∅............. Equation 1
Where F = magnetic force, B = earth's magnetic field, I = current flowing through the wire, L = Length of the wire, ∅ = angle between the field and the wire.
make B the subject of the equation
B = F/ILsin∅.................. Equation 2
From the question,
Given: F = 0.16 N, I = 68 A, L = 34 m, ∅ = 72°
Substitute these values into equation 2
B = 0.16/(68×34×sin72°)
B = 0.16/(68×34×0.95)
B = 0.16/2196.4
B = 7.28×10⁻⁵ T
At what angle torque is half of the max
A bird has a kinetic energy of 3 J and a potential energy of 25 J. What is the mechanical energy of the bird?
Answer:
28 j
Explanation:
because when you add you get 28
What is the feature known as the "Great Dark Spot" of Neptune? It is an apparently permanent feature about five times the size of Earth, similar to the Great Red Spot of Jupiter, near Neptune's south pole. It was a dark hole in the upper atmosphere left by the collision of the comet Shoemaker-Levy 9. It was an apparently temporary feature about the size of Earth, similar to the Great Red Spot of Jupiter, but disappeared within a few years. It is a dark surface feature on the surface snow layers caused by radiation discoloration of the older layers. It is a permanent discoloration of the north polar region of Neptune caused by locally prevailing lower surface temperatures there.
Answer:
It was an apparently temporary feature about the size of Earth, similar to the Great Red Spot of Jupiter, but disappeared within a few years.
Explanation:
The Great Dark Spot of Neptune was an immense spinning storm in the southern atmosphere of Neptune. The size of the entire Earth, it had the strongest winds ever recorded on any planet in the solar system. It was discovered by the Voyager 2 spacecraft in 1989, but by 1994 the Hubble Space Telescope saw it was gone.
The Great Red Spot is a storm found in Jupiter's southern hemisphere, with similar characteristics to the Great Dark Spot.
1. A turtle and a rabbit are to have a race. The turtle’s average speed is 0.9 m/s. The rabbit’s average speed is 9 m/s. The distance from the starting line to the finish line is 1500 m. The rabbit decides to let the turtle run before he starts running to give the turtle a head start. If the rabbit started to run 30 minutes after the turtle started, can he win the race? Explain.
Answer:no
Explanation:because 0.9*(30*60)=0.9*1800=1620
The turtle has already won the race
Yes rabbit will win the race will distance in 3.2 hours and turtle will cover in 27 hours
What will be the speed of the rabbit and the turtle?It is given
[tex]V_{t} = 0.9 \frac{m}{s}[/tex]
[tex]V_{r} = 9 \frac{m}{s}[/tex]
[tex]D=1500 m[/tex]
Time taken by turtle
[tex]T= \dfrac{D}{V_{t} }=\dfrac{1500}{0.9_{} }[/tex]
[tex]T=1666 minutes= 27 hours[/tex]
Time taken by rabbit
[tex]T= \dfrac{D}{V_{r} }=\dfrac{1500}{9_{} }[/tex]
[tex]T=166 minutes[/tex]
since rabbit started 30 minutes after turtle then
[tex]T= 136+30=196 minutes[/tex]
[tex]T= 3.2 hours[/tex]
Hence Yes rabbit will win the race will distance in 3.2 hours and turtle will cover in 27 hours
To know more about average velocity follow
https://brainly.com/question/6504879
A wire carrying a 23.0 A current passes between the poles of a strong magnet such that the wire is perpendicular to the magnet's field, and there is a 2.45 N force on the 3.00 cm of wire in the field. What is the average field strength (in T) between the poles of the magnet?
Answer:
3.55 T
Explanation:
Applying,
F = BILsin∅.............. Equation 1
Where F = Force, B = magnetic Field, I = current, L = Length of the wire, ∅ = Angle between the wire and the magnetic field
make B the subject of the equation
B = F/ILsin∅.................. Equation 2
From the question,
Given: F = 2.45 N, L = 3.00 cm = 0.03 m, I = 23.0 A, ∅ = 90° (Perpendicular)
Substitute these values into equation 2
B = 2.45/(0.03×23×sin90)
B = 2.45/0.69
B = 3.55 T
A stone dropped from the top of a 80m high building strikes the ground at 40 m/s after falling for 4 seconds. The stone's potential energy with respect to the ground is equal to its kinetic energy … (use g = 10 m/s 2)
A) at the moment of impact.
B) 2 seconds after the stone is released.
C) after the stone has fallen 40 m.
D) when the stone is moving at 20 m/s.
At the moment of impact both Kinetic Energy and Potential Energy should be 0, right? So it can't be A), right? Or is this wrong? Is it indeed A)? Please show work and explain it well.
Answer:
Explanation:
The answer is C because the building is 80 meters high. Before the stone is dropped, it has ONLY potential energy since kinetic energy involves velocity and a still stone has no velocity. At impact, there is no potential energy because potential energy involves the height of the stone relative to the ground and a stone ON the ground has no height; here there is ONLY kinetic.
From the First Law of Thermodynamics, we know that energy cannot be created or destroyed, it can only change form. Therefore, that means that at the halfway point of 40 meters, half of the stone's potential energy has been lost, and it has been lost to kinetic energy. Here, at 40 meters, there is an equality between PE and KE. It only last for however long the stone is AT 40 meters, which is probably a millisecond of time, but that's where they are equal.
Urgent please help me
1433 km
Explanation:
Let g' = the gravitational field strength at an altitude h
[tex]g' = G\dfrac{M_E}{(R_E + h)^2}[/tex]
We also know that g at the earth's surface is
[tex]g = G\dfrac{M_E}{R_E^2}[/tex]
Since g' = (2/3)g, we can write
[tex]G\dfrac{M_E}{(R_E + h)^2} = \dfrac{2}{3}\left(G\dfrac{M_E}{R_E^2} \right)[/tex]
Simplifying the above expression by cancelling out common factors, we get
[tex](R_E + h)^2 = \dfrac{3}{2} R_E^2[/tex]
Taking the square root of both sides, this becomes
[tex]R_E + h = \left(\!\sqrt{\dfrac{3}{2}}\right) R_E[/tex]
Solving for h, we get
[tex]h = \left(\!\sqrt{\dfrac{3}{2}} - 1\right) R_E= 0.225(6.371×10^2\:\text{km})[/tex]
[tex]\:\:\:\:\:= 1433\:\text{km}[/tex]
The speed of a car decreases uniformly as it passes a curve point where normal component of acceleration is 4 ft/sec2. If the car total acceleration of 5ft/sec2 is the same as it passes a hump, the tangential component of acceleration is _______________ ft/sec2.
Answer:
45
Explanation:
ft/sec2
What is the name of the invisible line that runs
down the center of the axial region?
Answer:
An axis is an invisible line around which an object rotates, or spins. The points where an axis intersects with an object's surface are the object's North and South Poles.
Explanation:
The Earth's axis is represented by the red line. The white circle represents axial precission, the slow "wobble" of the axis.
Why must scientists be careful when studying
nanotechnology?
Answer:
When studying nanotechnology, scientists must be aware that their ideas may not work out. Their work could be very time consuming and cost a lot of money. Finally, scientists do not yet know all of the effects of nanotechnology on human health.
Hope it helps u:)
How much work does the electric field do in moving a proton from a point with a potential of 170 V to a point where it is -50 V
An ideal parallel plate capacitor with a cross-sectional area of 0.4 cm2 contains a dielectric with a dielectric constant of 4 and a dielectric strength of 2 x 108 V/m. The separation between the plates of the capacitor is 5 mm. What is the maximum electric charge (in nC) that can be stored in the capacitor before dielectric breakdown
Answer: [tex]283.2\times 10^{-9}\ nC[/tex]
Explanation:
Given
Cross-sectional area [tex]A=0.4\ cm^2[/tex]
Dielectric constant [tex]k=4[/tex]
Dielectric strength [tex]E=2\times 10^8\ V/m[/tex]
Distance between capacitors [tex]d=5\ mm[/tex]
Maximum charge that can be stored before dielectric breakdown is given by
[tex]\Rightarrow Q=CV\\\\\Rightarrow Q=\dfrac{k\epsilon_oA}{d}\cdot (Ed)\quad\quad [V=E\cdot d]\\\\\Rightarrow Q=k\epsilon_oAE\\\\\Rightarrow Q=4\times 8.85\times 10^{-12}\times 0.4\times 10^{-4}\times 2\times 10^8\\\\\Rightarrow Q=28.32\times 10^{-8}\\\\\Rightarrow Q=283.2\times 10^{-9}\ nC[/tex]
Answer:
The maximum charge is 7.08 x 10^-8 C.
Explanation:
Area, A = 0.4 cm^2
K = 4
Electric field, E = 2 x 10^8 V/m
separation, d = 5 mm = 0.005 m
Let the capacitance is C and the charge is q.
[tex]q = CV\\\\q=\frac{\varepsilon o A}{d}\times E d\\\\q = \varepsilon o A E\\\\q = 8.85\times 10^{-12}\times0.4\times 10^{-4}\times 2\times 10^8\\\\q = 7.08\times 10^{-8}C[/tex]
distance of distinct vision.
is placed at a distance less than the distance of near point, its image o
will be blurred. Hence human eye can not see such object clearly.
ADDITIONAL INFORMATION
distance of distinct vision for a normal eye of different age groups
Babies = 7 cm
Adults = 25 cm
erson of age 55 years and above = 100 cm
ever, in our discussion we are concerned with a normal eye of an adult so least
The foulart position of an ahiect from a human eve so that the sh
The least distance up to which we can see the objects clearly without any strain is called least distance of distinct vision. Least distance of distinct vision for a normal human being is 25cm. For young people, the least distance of distant vision will be within 25cm which however it varies with age.
Answer:
25 you said ? thats incorecct
Explanation:
A satellite measures a spectral radiance of 8 Watts/m2/um/ster at a wavelength of 10 microns. Assuming a surface emissivity of 0.90, what would be the estimated temperature
